1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause 3 * 4 * Copyright (c) 2003 Silicon Graphics International Corp. 5 * Copyright (c) 2011 Spectra Logic Corporation 6 * Copyright (c) 2014-2017 Alexander Motin <mav@FreeBSD.org> 7 * All rights reserved. 8 * 9 * Redistribution and use in source and binary forms, with or without 10 * modification, are permitted provided that the following conditions 11 * are met: 12 * 1. Redistributions of source code must retain the above copyright 13 * notice, this list of conditions, and the following disclaimer, 14 * without modification. 15 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 16 * substantially similar to the "NO WARRANTY" disclaimer below 17 * ("Disclaimer") and any redistribution must be conditioned upon 18 * including a substantially similar Disclaimer requirement for further 19 * binary redistribution. 20 * 21 * NO WARRANTY 22 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 23 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 24 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR 25 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 26 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 27 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 28 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 29 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 30 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 31 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 32 * POSSIBILITY OF SUCH DAMAGES. 33 * 34 * $Id: //depot/users/kenm/FreeBSD-test2/sys/cam/ctl/ctl_ioctl.h#4 $ 35 * $FreeBSD$ 36 */ 37 /* 38 * CAM Target Layer ioctl interface. 39 * 40 * Author: Ken Merry <ken@FreeBSD.org> 41 */ 42 43 #ifndef _CTL_IOCTL_H_ 44 #define _CTL_IOCTL_H_ 45 46 #ifdef ICL_KERNEL_PROXY 47 #include <sys/socket.h> 48 #endif 49 50 #include <sys/ioccom.h> 51 #include <sys/nv.h> 52 53 #define CTL_DEFAULT_DEV "/dev/cam/ctl" 54 /* 55 * Maximum number of targets we support. 56 */ 57 #define CTL_MAX_TARGETS 1 58 59 /* 60 * Maximum target ID we support. 61 */ 62 #define CTL_MAX_TARGID 15 63 64 /* 65 * Maximum number of initiators per port. 66 */ 67 #define CTL_MAX_INIT_PER_PORT 2048 68 69 /* Hopefully this won't conflict with new misc devices that pop up */ 70 #define CTL_MINOR 225 71 72 typedef enum { 73 CTL_DELAY_TYPE_NONE, 74 CTL_DELAY_TYPE_CONT, 75 CTL_DELAY_TYPE_ONESHOT 76 } ctl_delay_type; 77 78 typedef enum { 79 CTL_DELAY_LOC_NONE, 80 CTL_DELAY_LOC_DATAMOVE, 81 CTL_DELAY_LOC_DONE, 82 } ctl_delay_location; 83 84 typedef enum { 85 CTL_DELAY_STATUS_NONE, 86 CTL_DELAY_STATUS_OK, 87 CTL_DELAY_STATUS_INVALID_LUN, 88 CTL_DELAY_STATUS_INVALID_TYPE, 89 CTL_DELAY_STATUS_INVALID_LOC, 90 CTL_DELAY_STATUS_NOT_IMPLEMENTED 91 } ctl_delay_status; 92 93 struct ctl_io_delay_info { 94 uint32_t lun_id; 95 ctl_delay_type delay_type; 96 ctl_delay_location delay_loc; 97 uint32_t delay_secs; 98 ctl_delay_status status; 99 }; 100 101 typedef enum { 102 CTL_STATS_NO_IO, 103 CTL_STATS_READ, 104 CTL_STATS_WRITE 105 } ctl_stat_types; 106 #define CTL_STATS_NUM_TYPES 3 107 108 typedef enum { 109 CTL_SS_OK, 110 CTL_SS_NEED_MORE_SPACE, 111 CTL_SS_ERROR 112 } ctl_stats_status; 113 114 typedef enum { 115 CTL_STATS_FLAG_NONE = 0x00, 116 CTL_STATS_FLAG_TIME_VALID = 0x01 117 } ctl_stats_flags; 118 119 struct ctl_io_stats { 120 uint32_t item; 121 uint64_t bytes[CTL_STATS_NUM_TYPES]; 122 uint64_t operations[CTL_STATS_NUM_TYPES]; 123 uint64_t dmas[CTL_STATS_NUM_TYPES]; 124 struct bintime time[CTL_STATS_NUM_TYPES]; 125 struct bintime dma_time[CTL_STATS_NUM_TYPES]; 126 }; 127 128 struct ctl_get_io_stats { 129 struct ctl_io_stats *stats; /* passed to/from kernel */ 130 size_t alloc_len; /* passed to kernel */ 131 size_t fill_len; /* passed to userland */ 132 int first_item; /* passed to kernel */ 133 int num_items; /* passed to userland */ 134 ctl_stats_status status; /* passed to userland */ 135 ctl_stats_flags flags; /* passed to userland */ 136 struct timespec timestamp; /* passed to userland */ 137 }; 138 139 /* 140 * The types of errors that can be injected: 141 * 142 * NONE: No error specified. 143 * ABORTED: SSD_KEY_ABORTED_COMMAND, 0x45, 0x00 144 * MEDIUM_ERR: Medium error, different asc/ascq depending on read/write. 145 * UA: Unit attention. 146 * CUSTOM: User specifies the sense data. 147 * TYPE: Mask to use with error types. 148 * 149 * Flags that affect injection behavior: 150 * CONTINUOUS: This error will stay around until explicitly cleared. 151 * DESCRIPTOR: Use descriptor sense instead of fixed sense. 152 */ 153 typedef enum { 154 CTL_LUN_INJ_NONE = 0x000, 155 CTL_LUN_INJ_ABORTED = 0x001, 156 CTL_LUN_INJ_MEDIUM_ERR = 0x002, 157 CTL_LUN_INJ_UA = 0x003, 158 CTL_LUN_INJ_CUSTOM = 0x004, 159 CTL_LUN_INJ_TYPE = 0x0ff, 160 CTL_LUN_INJ_CONTINUOUS = 0x100, 161 CTL_LUN_INJ_DESCRIPTOR = 0x200 162 } ctl_lun_error; 163 164 /* 165 * Flags to specify what type of command the given error pattern will 166 * execute on. The first group of types can be ORed together. 167 * 168 * READ: Any read command. 169 * WRITE: Any write command. 170 * READWRITE: Any read or write command. 171 * READCAP: Any read capacity command. 172 * TUR: Test Unit Ready. 173 * ANY: Any command. 174 * MASK: Mask for basic command patterns. 175 * 176 * Special types: 177 * 178 * CMD: The CDB to act on is specified in struct ctl_error_desc_cmd. 179 * RANGE: For read/write commands, act when the LBA is in the 180 * specified range. 181 */ 182 typedef enum { 183 CTL_LUN_PAT_NONE = 0x000, 184 CTL_LUN_PAT_READ = 0x001, 185 CTL_LUN_PAT_WRITE = 0x002, 186 CTL_LUN_PAT_READWRITE = CTL_LUN_PAT_READ | CTL_LUN_PAT_WRITE, 187 CTL_LUN_PAT_READCAP = 0x004, 188 CTL_LUN_PAT_TUR = 0x008, 189 CTL_LUN_PAT_ANY = 0x0ff, 190 CTL_LUN_PAT_MASK = 0x0ff, 191 CTL_LUN_PAT_CMD = 0x100, 192 CTL_LUN_PAT_RANGE = 0x200 193 } ctl_lun_error_pattern; 194 195 /* 196 * This structure allows the user to specify a particular CDB pattern to 197 * look for. 198 * 199 * cdb_pattern: Fill in the relevant bytes to look for in the CDB. 200 * cdb_valid_bytes: Bitmask specifying valid bytes in the cdb_pattern. 201 * flags: Specify any command flags (see ctl_io_flags) that 202 * should be set. 203 */ 204 struct ctl_error_desc_cmd { 205 uint8_t cdb_pattern[CTL_MAX_CDBLEN]; 206 uint32_t cdb_valid_bytes; 207 uint32_t flags; 208 }; 209 210 /* 211 * Error injection descriptor. 212 * 213 * lun_id LUN to act on. 214 * lun_error: The type of error to inject. See above for descriptions. 215 * error_pattern: What kind of command to act on. See above. 216 * cmd_desc: For CTL_LUN_PAT_CMD only. 217 * lba_range: For CTL_LUN_PAT_RANGE only. 218 * custom_sense: Specify sense. For CTL_LUN_INJ_CUSTOM only. 219 * serial: Serial number returned by the kernel. Use for deletion. 220 * links: Kernel use only. 221 */ 222 struct ctl_error_desc { 223 uint32_t lun_id; /* To kernel */ 224 ctl_lun_error lun_error; /* To kernel */ 225 ctl_lun_error_pattern error_pattern; /* To kernel */ 226 struct ctl_error_desc_cmd cmd_desc; /* To kernel */ 227 struct ctl_lba_len lba_range; /* To kernel */ 228 struct scsi_sense_data custom_sense; /* To kernel */ 229 uint64_t serial; /* From kernel */ 230 STAILQ_ENTRY(ctl_error_desc) links; /* Kernel use only */ 231 }; 232 233 typedef enum { 234 CTL_OOA_FLAG_NONE = 0x00, 235 CTL_OOA_FLAG_ALL_LUNS = 0x01 236 } ctl_ooa_flags; 237 238 typedef enum { 239 CTL_OOA_OK, 240 CTL_OOA_NEED_MORE_SPACE, 241 CTL_OOA_ERROR 242 } ctl_get_ooa_status; 243 244 typedef enum { 245 CTL_OOACMD_FLAG_NONE = 0x00, 246 CTL_OOACMD_FLAG_DMA = 0x01, 247 CTL_OOACMD_FLAG_BLOCKED = 0x02, 248 CTL_OOACMD_FLAG_ABORT = 0x04, 249 CTL_OOACMD_FLAG_RTR = 0x08, 250 CTL_OOACMD_FLAG_DMA_QUEUED = 0x10, 251 CTL_OOACMD_FLAG_STATUS_QUEUED = 0x20, 252 CTL_OOACMD_FLAG_STATUS_SENT = 0x40 253 } ctl_ooa_cmd_flags; 254 255 struct ctl_ooa_entry { 256 ctl_ooa_cmd_flags cmd_flags; 257 uint8_t cdb[CTL_MAX_CDBLEN]; 258 uint8_t cdb_len; 259 uint64_t tag_num; 260 ctl_tag_type tag_type; 261 uint32_t lun_num; 262 struct bintime start_bt; 263 }; 264 265 struct ctl_ooa { 266 ctl_ooa_flags flags; /* passed to kernel */ 267 uint64_t lun_num; /* passed to kernel */ 268 uint32_t alloc_len; /* passed to kernel */ 269 uint32_t alloc_num; /* passed to kernel */ 270 struct ctl_ooa_entry *entries; /* filled in kernel */ 271 uint32_t fill_len; /* passed to userland */ 272 uint32_t fill_num; /* passed to userland */ 273 uint32_t dropped_num; /* passed to userland */ 274 struct bintime cur_bt; /* passed to userland */ 275 ctl_get_ooa_status status; /* passed to userland */ 276 }; 277 278 typedef enum { 279 CTL_LUN_NOSTATUS, 280 CTL_LUN_OK, 281 CTL_LUN_ERROR, 282 CTL_LUN_WARNING 283 } ctl_lun_status; 284 285 #define CTL_ERROR_STR_LEN 160 286 287 typedef enum { 288 CTL_LUNREQ_CREATE, 289 CTL_LUNREQ_RM, 290 CTL_LUNREQ_MODIFY, 291 } ctl_lunreq_type; 292 293 /* 294 * The ID_REQ flag is used to say that the caller has requested a 295 * particular LUN ID in the req_lun_id field. If we cannot allocate that 296 * LUN ID, the ctl_add_lun() call will fail. 297 * 298 * The STOPPED flag tells us that the LUN should default to the powered 299 * off state. It will return 0x04,0x02 until it is powered up. ("Logical 300 * unit not ready, initializing command required.") 301 * 302 * The NO_MEDIA flag tells us that the LUN has no media inserted. 303 * 304 * The PRIMARY flag tells us that this LUN is registered as a Primary LUN 305 * which is accessible via the Master shelf controller in an HA. This flag 306 * being set indicates a Primary LUN. This flag being reset represents a 307 * Secondary LUN controlled by the Secondary controller in an HA 308 * configuration. Flag is applicable at this time to T_DIRECT types. 309 * 310 * The SERIAL_NUM flag tells us that the serial_num field is filled in and 311 * valid for use in SCSI INQUIRY VPD page 0x80. 312 * 313 * The DEVID flag tells us that the device_id field is filled in and 314 * valid for use in SCSI INQUIRY VPD page 0x83. 315 * 316 * The DEV_TYPE flag tells us that the device_type field is filled in. 317 * 318 * The EJECTED flag tells us that the removable LUN has tray open. 319 * 320 * The UNMAP flag tells us that this LUN supports UNMAP. 321 * 322 * The OFFLINE flag tells us that this LUN can not access backing store. 323 */ 324 typedef enum { 325 CTL_LUN_FLAG_ID_REQ = 0x01, 326 CTL_LUN_FLAG_STOPPED = 0x02, 327 CTL_LUN_FLAG_NO_MEDIA = 0x04, 328 CTL_LUN_FLAG_PRIMARY = 0x08, 329 CTL_LUN_FLAG_SERIAL_NUM = 0x10, 330 CTL_LUN_FLAG_DEVID = 0x20, 331 CTL_LUN_FLAG_DEV_TYPE = 0x40, 332 CTL_LUN_FLAG_UNMAP = 0x80, 333 CTL_LUN_FLAG_EJECTED = 0x100, 334 CTL_LUN_FLAG_READONLY = 0x200 335 } ctl_backend_lun_flags; 336 337 /* 338 * LUN creation parameters: 339 * 340 * flags: Various LUN flags, see above. 341 * 342 * device_type: The SCSI device type. e.g. 0 for Direct Access, 343 * 3 for Processor, etc. Only certain backends may 344 * support setting this field. The CTL_LUN_FLAG_DEV_TYPE 345 * flag should be set in the flags field if the device 346 * type is set. 347 * 348 * lun_size_bytes: The size of the LUN in bytes. For some backends 349 * this is relevant (e.g. ramdisk), for others, it may 350 * be ignored in favor of using the properties of the 351 * backing store. If specified, this should be a 352 * multiple of the blocksize. 353 * 354 * The actual size of the LUN is returned in this 355 * field. 356 * 357 * blocksize_bytes: The LUN blocksize in bytes. For some backends this 358 * is relevant, for others it may be ignored in 359 * favor of using the properties of the backing store. 360 * 361 * The actual blocksize of the LUN is returned in this 362 * field. 363 * 364 * req_lun_id: The requested LUN ID. The CTL_LUN_FLAG_ID_REQ flag 365 * should be set if this is set. The request will be 366 * granted if the LUN number is available, otherwise 367 * the LUN addition request will fail. 368 * 369 * The allocated LUN number is returned in this field. 370 * 371 * serial_num: This is the value returned in SCSI INQUIRY VPD page 372 * 0x80. If it is specified, the CTL_LUN_FLAG_SERIAL_NUM 373 * flag should be set. 374 * 375 * The serial number value used is returned in this 376 * field. 377 * 378 * device_id: This is the value returned in the T10 vendor ID 379 * based DESIGNATOR field in the SCSI INQUIRY VPD page 380 * 0x83 data. If it is specified, the CTL_LUN_FLAG_DEVID 381 * flag should be set. 382 * 383 * The device id value used is returned in this field. 384 */ 385 struct ctl_lun_create_params { 386 ctl_backend_lun_flags flags; 387 uint8_t device_type; 388 uint64_t lun_size_bytes; 389 uint32_t blocksize_bytes; 390 uint32_t req_lun_id; 391 uint8_t serial_num[CTL_SN_LEN]; 392 uint8_t device_id[CTL_DEVID_LEN]; 393 }; 394 395 /* 396 * LUN removal parameters: 397 * 398 * lun_id: The number of the LUN to delete. This must be set. 399 * The LUN must be backed by the given backend. 400 */ 401 struct ctl_lun_rm_params { 402 uint32_t lun_id; 403 }; 404 405 /* 406 * LUN modification parameters: 407 * 408 * lun_id: The number of the LUN to modify. This must be set. 409 * The LUN must be backed by the given backend. 410 * 411 * lun_size_bytes: The size of the LUN in bytes. If zero, update 412 * the size using the backing file size, if possible. 413 */ 414 struct ctl_lun_modify_params { 415 uint32_t lun_id; 416 uint64_t lun_size_bytes; 417 }; 418 419 /* 420 * Union of request type data. Fill in the appropriate union member for 421 * the request type. 422 */ 423 union ctl_lunreq_data { 424 struct ctl_lun_create_params create; 425 struct ctl_lun_rm_params rm; 426 struct ctl_lun_modify_params modify; 427 }; 428 429 /* 430 * LUN request interface: 431 * 432 * backend: This is required, and is NUL-terminated a string 433 * that is the name of the backend, like "ramdisk" or 434 * "block". 435 * 436 * reqtype: The type of request, CTL_LUNREQ_CREATE to create a 437 * LUN, CTL_LUNREQ_RM to delete a LUN. 438 * 439 * reqdata: Request type-specific information. See the 440 * description of individual the union members above 441 * for more information. 442 * 443 * num_be_args: This is the number of backend-specific arguments 444 * in the be_args array. 445 * 446 * be_args: This is an array of backend-specific arguments. 447 * See above for a description of the fields in this 448 * structure. 449 * 450 * status: Status of the LUN request. 451 * 452 * error_str: If the status is CTL_LUN_ERROR, this will 453 * contain a string describing the error. 454 * 455 * kern_be_args: For kernel use only. 456 */ 457 struct ctl_lun_req { 458 #define CTL_BE_NAME_LEN 32 459 char backend[CTL_BE_NAME_LEN]; 460 ctl_lunreq_type reqtype; 461 union ctl_lunreq_data reqdata; 462 void * args; 463 nvlist_t * args_nvl; 464 #define CTL_MAX_ARGS_LEN (1024 * 1024) 465 size_t args_len; 466 void * result; 467 nvlist_t * result_nvl; 468 size_t result_len; 469 ctl_lun_status status; 470 char error_str[CTL_ERROR_STR_LEN]; 471 }; 472 473 /* 474 * LUN list status: 475 * 476 * NONE: No status. 477 * 478 * OK: Request completed successfully. 479 * 480 * NEED_MORE_SPACE: The allocated length of the entries field is too 481 * small for the available data. 482 * 483 * ERROR: An error occurred, look at the error string for a 484 * description of the error. 485 */ 486 typedef enum { 487 CTL_LUN_LIST_NONE, 488 CTL_LUN_LIST_OK, 489 CTL_LUN_LIST_NEED_MORE_SPACE, 490 CTL_LUN_LIST_ERROR 491 } ctl_lun_list_status; 492 493 /* 494 * LUN list interface 495 * 496 * backend_name: This is a NUL-terminated string. If the string 497 * length is 0, then all LUNs on all backends will 498 * be enumerated. Otherwise this is the name of the 499 * backend to be enumerated, like "ramdisk" or "block". 500 * 501 * alloc_len: The length of the data buffer allocated for entries. 502 * In order to properly size the buffer, make one call 503 * with alloc_len set to 0, and then use the returned 504 * dropped_len as the buffer length to allocate and 505 * pass in on a subsequent call. 506 * 507 * lun_xml: XML-formatted information on the requested LUNs. 508 * 509 * fill_len: The amount of data filled in the storage for entries. 510 * 511 * status: The status of the request. See above for the 512 * description of the values of this field. 513 * 514 * error_str: If the status indicates an error, this string will 515 * be filled in to describe the error. 516 */ 517 struct ctl_lun_list { 518 char backend[CTL_BE_NAME_LEN]; /* passed to kernel*/ 519 uint32_t alloc_len; /* passed to kernel */ 520 char *lun_xml; /* filled in kernel */ 521 uint32_t fill_len; /* passed to userland */ 522 ctl_lun_list_status status; /* passed to userland */ 523 char error_str[CTL_ERROR_STR_LEN]; 524 /* passed to userland */ 525 }; 526 527 /* 528 * Port request interface: 529 * 530 * driver: This is required, and is NUL-terminated a string 531 * that is the name of the frontend, like "iscsi" . 532 * 533 * reqtype: The type of request, CTL_REQ_CREATE to create a 534 * port, CTL_REQ_REMOVE to delete a port. 535 * 536 * num_be_args: This is the number of frontend-specific arguments 537 * in the be_args array. 538 * 539 * be_args: This is an array of frontend-specific arguments. 540 * See above for a description of the fields in this 541 * structure. 542 * 543 * status: Status of the request. 544 * 545 * error_str: If the status is CTL_LUN_ERROR, this will 546 * contain a string describing the error. 547 * 548 * kern_be_args: For kernel use only. 549 */ 550 typedef enum { 551 CTL_REQ_CREATE, 552 CTL_REQ_REMOVE, 553 CTL_REQ_MODIFY, 554 } ctl_req_type; 555 556 struct ctl_req { 557 char driver[CTL_DRIVER_NAME_LEN]; 558 ctl_req_type reqtype; 559 void * args; 560 nvlist_t * args_nvl; 561 size_t args_len; 562 void * result; 563 nvlist_t * result_nvl; 564 size_t result_len; 565 ctl_lun_status status; 566 char error_str[CTL_ERROR_STR_LEN]; 567 }; 568 569 /* 570 * iSCSI status 571 * 572 * OK: Request completed successfully. 573 * 574 * ERROR: An error occurred, look at the error string for a 575 * description of the error. 576 * 577 * CTL_ISCSI_LIST_NEED_MORE_SPACE: 578 * User has to pass larger buffer for CTL_ISCSI_LIST ioctl. 579 */ 580 typedef enum { 581 CTL_ISCSI_OK, 582 CTL_ISCSI_ERROR, 583 CTL_ISCSI_LIST_NEED_MORE_SPACE, 584 CTL_ISCSI_SESSION_NOT_FOUND 585 } ctl_iscsi_status; 586 587 typedef enum { 588 CTL_ISCSI_HANDOFF, 589 CTL_ISCSI_LIST, 590 CTL_ISCSI_LOGOUT, 591 CTL_ISCSI_TERMINATE, 592 CTL_ISCSI_LIMITS, 593 #if defined(ICL_KERNEL_PROXY) || 1 594 /* 595 * We actually need those in all cases, but leave the ICL_KERNEL_PROXY, 596 * to remember to remove them along with rest of proxy code, eventually. 597 */ 598 CTL_ISCSI_LISTEN, 599 CTL_ISCSI_ACCEPT, 600 CTL_ISCSI_SEND, 601 CTL_ISCSI_RECEIVE, 602 #endif 603 } ctl_iscsi_type; 604 605 typedef enum { 606 CTL_ISCSI_DIGEST_NONE, 607 CTL_ISCSI_DIGEST_CRC32C 608 } ctl_iscsi_digest; 609 610 #define CTL_ISCSI_NAME_LEN 224 /* 223 bytes, by RFC 3720, + '\0' */ 611 #define CTL_ISCSI_ADDR_LEN 47 /* INET6_ADDRSTRLEN + '\0' */ 612 #define CTL_ISCSI_ALIAS_LEN 128 /* Arbitrary. */ 613 #define CTL_ISCSI_OFFLOAD_LEN 8 /* Arbitrary. */ 614 615 struct ctl_iscsi_handoff_params { 616 char initiator_name[CTL_ISCSI_NAME_LEN]; 617 char initiator_addr[CTL_ISCSI_ADDR_LEN]; 618 char initiator_alias[CTL_ISCSI_ALIAS_LEN]; 619 uint8_t initiator_isid[6]; 620 char target_name[CTL_ISCSI_NAME_LEN]; 621 int socket; 622 int portal_group_tag; 623 624 /* 625 * Connection parameters negotiated by ctld(8). 626 */ 627 ctl_iscsi_digest header_digest; 628 ctl_iscsi_digest data_digest; 629 uint32_t cmdsn; 630 uint32_t statsn; 631 int max_recv_data_segment_length; 632 int max_burst_length; 633 int first_burst_length; 634 uint32_t immediate_data; 635 char offload[CTL_ISCSI_OFFLOAD_LEN]; 636 #ifdef ICL_KERNEL_PROXY 637 int connection_id; 638 #else 639 int spare; 640 #endif 641 int max_send_data_segment_length; 642 }; 643 644 struct ctl_iscsi_list_params { 645 uint32_t alloc_len; /* passed to kernel */ 646 char *conn_xml; /* filled in kernel */ 647 uint32_t fill_len; /* passed to userland */ 648 int spare[4]; 649 }; 650 651 struct ctl_iscsi_logout_params { 652 int connection_id; /* passed to kernel */ 653 char initiator_name[CTL_ISCSI_NAME_LEN]; 654 /* passed to kernel */ 655 char initiator_addr[CTL_ISCSI_ADDR_LEN]; 656 /* passed to kernel */ 657 int all; /* passed to kernel */ 658 int spare[4]; 659 }; 660 661 struct ctl_iscsi_terminate_params { 662 int connection_id; /* passed to kernel */ 663 char initiator_name[CTL_ISCSI_NAME_LEN]; 664 /* passed to kernel */ 665 char initiator_addr[CTL_ISCSI_NAME_LEN]; 666 /* passed to kernel */ 667 int all; /* passed to kernel */ 668 int spare[4]; 669 }; 670 671 struct ctl_iscsi_limits_params { 672 /* passed to kernel */ 673 char offload[CTL_ISCSI_OFFLOAD_LEN]; 674 int socket; 675 676 /* passed to userland */ 677 #ifdef __LP64__ 678 int spare; 679 #endif 680 int max_recv_data_segment_length; 681 int max_send_data_segment_length; 682 int max_burst_length; 683 int first_burst_length; 684 }; 685 686 #ifdef ICL_KERNEL_PROXY 687 struct ctl_iscsi_listen_params { 688 int iser; 689 int domain; 690 int socktype; 691 int protocol; 692 struct sockaddr *addr; 693 socklen_t addrlen; 694 int portal_id; 695 int spare[4]; 696 }; 697 698 struct ctl_iscsi_accept_params { 699 int connection_id; 700 int portal_id; 701 struct sockaddr *initiator_addr; 702 socklen_t initiator_addrlen; 703 int spare[4]; 704 }; 705 706 struct ctl_iscsi_send_params { 707 int connection_id; 708 void *bhs; 709 size_t spare; 710 void *spare2; 711 size_t data_segment_len; 712 void *data_segment; 713 int spare3[4]; 714 }; 715 716 struct ctl_iscsi_receive_params { 717 int connection_id; 718 void *bhs; 719 size_t spare; 720 void *spare2; 721 size_t data_segment_len; 722 void *data_segment; 723 int spare3[4]; 724 }; 725 726 #endif /* ICL_KERNEL_PROXY */ 727 728 union ctl_iscsi_data { 729 struct ctl_iscsi_handoff_params handoff; 730 struct ctl_iscsi_list_params list; 731 struct ctl_iscsi_logout_params logout; 732 struct ctl_iscsi_terminate_params terminate; 733 struct ctl_iscsi_limits_params limits; 734 #ifdef ICL_KERNEL_PROXY 735 struct ctl_iscsi_listen_params listen; 736 struct ctl_iscsi_accept_params accept; 737 struct ctl_iscsi_send_params send; 738 struct ctl_iscsi_receive_params receive; 739 #endif 740 }; 741 742 /* 743 * iSCSI interface 744 * 745 * status: The status of the request. See above for the 746 * description of the values of this field. 747 * 748 * error_str: If the status indicates an error, this string will 749 * be filled in to describe the error. 750 */ 751 struct ctl_iscsi { 752 ctl_iscsi_type type; /* passed to kernel */ 753 union ctl_iscsi_data data; /* passed to kernel */ 754 ctl_iscsi_status status; /* passed to userland */ 755 char error_str[CTL_ERROR_STR_LEN]; 756 /* passed to userland */ 757 }; 758 759 struct ctl_lun_map { 760 uint32_t port; 761 uint32_t plun; 762 uint32_t lun; 763 }; 764 765 #define CTL_IO _IOWR(CTL_MINOR, 0x00, union ctl_io) 766 #define CTL_ENABLE_PORT _IOW(CTL_MINOR, 0x04, struct ctl_port_entry) 767 #define CTL_DISABLE_PORT _IOW(CTL_MINOR, 0x05, struct ctl_port_entry) 768 #define CTL_DELAY_IO _IOWR(CTL_MINOR, 0x10, struct ctl_io_delay_info) 769 #define CTL_ERROR_INJECT _IOWR(CTL_MINOR, 0x16, struct ctl_error_desc) 770 #define CTL_GET_OOA _IOWR(CTL_MINOR, 0x18, struct ctl_ooa) 771 #define CTL_DUMP_STRUCTS _IO(CTL_MINOR, 0x19) 772 #define CTL_LUN_REQ _IOWR(CTL_MINOR, 0x21, struct ctl_lun_req) 773 #define CTL_LUN_LIST _IOWR(CTL_MINOR, 0x22, struct ctl_lun_list) 774 #define CTL_ERROR_INJECT_DELETE _IOW(CTL_MINOR, 0x23, struct ctl_error_desc) 775 #define CTL_SET_PORT_WWNS _IOW(CTL_MINOR, 0x24, struct ctl_port_entry) 776 #define CTL_ISCSI _IOWR(CTL_MINOR, 0x25, struct ctl_iscsi) 777 #define CTL_PORT_REQ _IOWR(CTL_MINOR, 0x26, struct ctl_req) 778 #define CTL_PORT_LIST _IOWR(CTL_MINOR, 0x27, struct ctl_lun_list) 779 #define CTL_LUN_MAP _IOW(CTL_MINOR, 0x28, struct ctl_lun_map) 780 #define CTL_GET_LUN_STATS _IOWR(CTL_MINOR, 0x29, struct ctl_get_io_stats) 781 #define CTL_GET_PORT_STATS _IOWR(CTL_MINOR, 0x2a, struct ctl_get_io_stats) 782 783 #endif /* _CTL_IOCTL_H_ */ 784 785 /* 786 * vim: ts=8 787 */ 788