1 /*- 2 * Copyright 2009 Scott Long 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions, and the following disclaimer, 10 * without modification, immediately at the beginning of the file. 11 * 2. The name of the author may not be used to endorse or promote products 12 * derived from this software without specific prior written permission. 13 * 14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 15 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 16 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 17 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR 18 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 19 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 20 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 21 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 22 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 23 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 24 * SUCH DAMAGE. 25 * 26 * $FreeBSD$ 27 */ 28 29 #ifndef _CAM_CAM_XPT_INTERNAL_H 30 #define _CAM_CAM_XPT_INTERNAL_H 1 31 32 /* Forward Declarations */ 33 struct cam_eb; 34 struct cam_et; 35 struct cam_ed; 36 37 typedef struct cam_ed * (*xpt_alloc_device_func)(struct cam_eb *bus, 38 struct cam_et *target, 39 lun_id_t lun_id); 40 typedef void (*xpt_release_device_func)(struct cam_ed *device); 41 typedef void (*xpt_action_func)(union ccb *start_ccb); 42 typedef void (*xpt_dev_async_func)(u_int32_t async_code, 43 struct cam_eb *bus, 44 struct cam_et *target, 45 struct cam_ed *device, 46 void *async_arg); 47 typedef void (*xpt_announce_periph_func)(struct cam_periph *periph); 48 49 struct xpt_xport { 50 xpt_alloc_device_func alloc_device; 51 xpt_release_device_func reldev; 52 xpt_action_func action; 53 xpt_dev_async_func async; 54 xpt_announce_periph_func announce; 55 }; 56 57 /* 58 * Structure for queueing a device in a run queue. 59 * There is one run queue for allocating new ccbs, 60 * and another for sending ccbs to the controller. 61 */ 62 struct cam_ed_qinfo { 63 cam_pinfo pinfo; 64 struct cam_ed *device; 65 }; 66 67 /* 68 * The CAM EDT (Existing Device Table) contains the device information for 69 * all devices for all busses in the system. The table contains a 70 * cam_ed structure for each device on the bus. 71 */ 72 struct cam_ed { 73 TAILQ_ENTRY(cam_ed) links; 74 struct cam_ed_qinfo alloc_ccb_entry; 75 struct cam_ed_qinfo send_ccb_entry; 76 struct cam_et *target; 77 struct cam_sim *sim; 78 lun_id_t lun_id; 79 struct camq drvq; /* 80 * Queue of type drivers wanting to do 81 * work on this device. 82 */ 83 struct cam_ccbq ccbq; /* Queue of pending ccbs */ 84 struct async_list asyncs; /* Async callback info for this B/T/L */ 85 struct periph_list periphs; /* All attached devices */ 86 u_int generation; /* Generation number */ 87 struct cam_periph *owner; /* Peripheral driver's ownership tag */ 88 void *quirk; /* Oddities about this device */ 89 u_int maxtags; 90 u_int mintags; 91 cam_proto protocol; 92 u_int protocol_version; 93 cam_xport transport; 94 u_int transport_version; 95 struct scsi_inquiry_data inq_data; 96 uint8_t *supported_vpds; 97 uint8_t supported_vpds_len; 98 uint32_t device_id_len; 99 uint8_t *device_id; 100 uint8_t physpath_len; 101 uint8_t *physpath; /* physical path string form */ 102 uint32_t rcap_len; 103 uint8_t *rcap_buf; 104 struct ata_params ident_data; 105 u_int8_t inq_flags; /* 106 * Current settings for inquiry flags. 107 * This allows us to override settings 108 * like disconnection and tagged 109 * queuing for a device. 110 */ 111 u_int8_t queue_flags; /* Queue flags from the control page */ 112 u_int8_t serial_num_len; 113 u_int8_t *serial_num; 114 u_int32_t flags; 115 #define CAM_DEV_UNCONFIGURED 0x01 116 #define CAM_DEV_REL_TIMEOUT_PENDING 0x02 117 #define CAM_DEV_REL_ON_COMPLETE 0x04 118 #define CAM_DEV_REL_ON_QUEUE_EMPTY 0x08 119 #define CAM_DEV_RESIZE_QUEUE_NEEDED 0x10 120 #define CAM_DEV_TAG_AFTER_COUNT 0x20 121 #define CAM_DEV_INQUIRY_DATA_VALID 0x40 122 #define CAM_DEV_IN_DV 0x80 123 #define CAM_DEV_DV_HIT_BOTTOM 0x100 124 #define CAM_DEV_IDENTIFY_DATA_VALID 0x200 125 u_int32_t tag_delay_count; 126 #define CAM_TAG_DELAY_COUNT 5 127 u_int32_t tag_saved_openings; 128 u_int32_t refcount; 129 struct callout callout; 130 }; 131 132 /* 133 * Each target is represented by an ET (Existing Target). These 134 * entries are created when a target is successfully probed with an 135 * identify, and removed when a device fails to respond after a number 136 * of retries, or a bus rescan finds the device missing. 137 */ 138 struct cam_et { 139 TAILQ_HEAD(, cam_ed) ed_entries; 140 TAILQ_ENTRY(cam_et) links; 141 struct cam_eb *bus; 142 target_id_t target_id; 143 u_int32_t refcount; 144 u_int generation; 145 struct timeval last_reset; 146 u_int rpl_size; 147 struct scsi_report_luns_data *luns; 148 }; 149 150 /* 151 * Each bus is represented by an EB (Existing Bus). These entries 152 * are created by calls to xpt_bus_register and deleted by calls to 153 * xpt_bus_deregister. 154 */ 155 struct cam_eb { 156 TAILQ_HEAD(, cam_et) et_entries; 157 TAILQ_ENTRY(cam_eb) links; 158 path_id_t path_id; 159 struct cam_sim *sim; 160 struct timeval last_reset; 161 u_int32_t flags; 162 #define CAM_EB_RUNQ_SCHEDULED 0x01 163 u_int32_t refcount; 164 u_int generation; 165 device_t parent_dev; 166 struct xpt_xport *xport; 167 }; 168 169 struct cam_path { 170 struct cam_periph *periph; 171 struct cam_eb *bus; 172 struct cam_et *target; 173 struct cam_ed *device; 174 }; 175 176 struct xpt_xport * scsi_get_xport(void); 177 struct xpt_xport * ata_get_xport(void); 178 179 struct cam_ed * xpt_alloc_device(struct cam_eb *bus, 180 struct cam_et *target, 181 lun_id_t lun_id); 182 void xpt_acquire_device(struct cam_ed *device); 183 void xpt_release_device(struct cam_ed *device); 184 int xpt_schedule_dev(struct camq *queue, cam_pinfo *dev_pinfo, 185 u_int32_t new_priority); 186 u_int32_t xpt_dev_ccbq_resize(struct cam_path *path, int newopenings); 187 void xpt_start_tags(struct cam_path *path); 188 void xpt_stop_tags(struct cam_path *path); 189 190 MALLOC_DECLARE(M_CAMXPT); 191 192 #endif 193