1 /*- 2 * Copyright 2009 Scott Long 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions, and the following disclaimer, 10 * without modification, immediately at the beginning of the file. 11 * 2. The name of the author may not be used to endorse or promote products 12 * derived from this software without specific prior written permission. 13 * 14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 15 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 16 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 17 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR 18 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 19 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 20 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 21 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 22 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 23 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 24 * SUCH DAMAGE. 25 * 26 * $FreeBSD$ 27 */ 28 29 #ifndef _CAM_CAM_XPT_INTERNAL_H 30 #define _CAM_CAM_XPT_INTERNAL_H 1 31 32 #include <sys/taskqueue.h> 33 34 /* Forward Declarations */ 35 struct cam_eb; 36 struct cam_et; 37 struct cam_ed; 38 39 typedef struct cam_ed * (*xpt_alloc_device_func)(struct cam_eb *bus, 40 struct cam_et *target, 41 lun_id_t lun_id); 42 typedef void (*xpt_release_device_func)(struct cam_ed *device); 43 typedef void (*xpt_action_func)(union ccb *start_ccb); 44 typedef void (*xpt_dev_async_func)(u_int32_t async_code, 45 struct cam_eb *bus, 46 struct cam_et *target, 47 struct cam_ed *device, 48 void *async_arg); 49 typedef void (*xpt_announce_periph_func)(struct cam_periph *periph); 50 51 struct xpt_xport_ops { 52 xpt_alloc_device_func alloc_device; 53 xpt_release_device_func reldev; 54 xpt_action_func action; 55 xpt_dev_async_func async; 56 xpt_announce_periph_func announce; 57 }; 58 59 struct xpt_xport { 60 cam_xport xport; 61 const char *name; 62 struct xpt_xport_ops *ops; 63 }; 64 65 SET_DECLARE(cam_xpt_xport_set, struct xpt_xport); 66 #define CAM_XPT_XPORT(data) \ 67 DATA_SET(cam_xpt_xport_set, data) 68 69 typedef void (*xpt_proto_announce_func)(struct cam_ed *); 70 typedef void (*xpt_proto_debug_out_func)(union ccb *); 71 72 struct xpt_proto_ops { 73 xpt_proto_announce_func announce; 74 xpt_proto_announce_func denounce; 75 xpt_proto_debug_out_func debug_out; 76 }; 77 78 struct xpt_proto { 79 cam_proto proto; 80 const char *name; 81 struct xpt_proto_ops *ops; 82 }; 83 84 SET_DECLARE(cam_xpt_proto_set, struct xpt_proto); 85 #define CAM_XPT_PROTO(data) \ 86 DATA_SET(cam_xpt_proto_set, data) 87 88 89 /* 90 * The CAM EDT (Existing Device Table) contains the device information for 91 * all devices for all busses in the system. The table contains a 92 * cam_ed structure for each device on the bus. 93 */ 94 struct cam_ed { 95 cam_pinfo devq_entry; 96 TAILQ_ENTRY(cam_ed) links; 97 struct cam_et *target; 98 struct cam_sim *sim; 99 lun_id_t lun_id; 100 struct cam_ccbq ccbq; /* Queue of pending ccbs */ 101 struct async_list asyncs; /* Async callback info for this B/T/L */ 102 struct periph_list periphs; /* All attached devices */ 103 u_int generation; /* Generation number */ 104 void *quirk; /* Oddities about this device */ 105 u_int maxtags; 106 u_int mintags; 107 cam_proto protocol; 108 u_int protocol_version; 109 cam_xport transport; 110 u_int transport_version; 111 struct scsi_inquiry_data inq_data; 112 uint8_t *supported_vpds; 113 uint8_t supported_vpds_len; 114 uint32_t device_id_len; 115 uint8_t *device_id; 116 uint32_t ext_inq_len; 117 uint8_t *ext_inq; 118 uint8_t physpath_len; 119 uint8_t *physpath; /* physical path string form */ 120 uint32_t rcap_len; 121 uint8_t *rcap_buf; 122 struct ata_params ident_data; 123 u_int8_t inq_flags; /* 124 * Current settings for inquiry flags. 125 * This allows us to override settings 126 * like disconnection and tagged 127 * queuing for a device. 128 */ 129 u_int8_t queue_flags; /* Queue flags from the control page */ 130 u_int8_t serial_num_len; 131 u_int8_t *serial_num; 132 u_int32_t flags; 133 #define CAM_DEV_UNCONFIGURED 0x01 134 #define CAM_DEV_REL_TIMEOUT_PENDING 0x02 135 #define CAM_DEV_REL_ON_COMPLETE 0x04 136 #define CAM_DEV_REL_ON_QUEUE_EMPTY 0x08 137 #define CAM_DEV_TAG_AFTER_COUNT 0x20 138 #define CAM_DEV_INQUIRY_DATA_VALID 0x40 139 #define CAM_DEV_IN_DV 0x80 140 #define CAM_DEV_DV_HIT_BOTTOM 0x100 141 #define CAM_DEV_IDENTIFY_DATA_VALID 0x200 142 u_int32_t tag_delay_count; 143 #define CAM_TAG_DELAY_COUNT 5 144 u_int32_t tag_saved_openings; 145 u_int32_t refcount; 146 struct callout callout; 147 STAILQ_ENTRY(cam_ed) highpowerq_entry; 148 struct mtx device_mtx; 149 struct task device_destroy_task; 150 const struct nvme_controller_data *nvme_cdata; 151 const struct nvme_namespace_data *nvme_data; 152 }; 153 154 /* 155 * Each target is represented by an ET (Existing Target). These 156 * entries are created when a target is successfully probed with an 157 * identify, and removed when a device fails to respond after a number 158 * of retries, or a bus rescan finds the device missing. 159 */ 160 struct cam_et { 161 TAILQ_HEAD(, cam_ed) ed_entries; 162 TAILQ_ENTRY(cam_et) links; 163 struct cam_eb *bus; 164 target_id_t target_id; 165 u_int32_t refcount; 166 u_int generation; 167 struct timeval last_reset; 168 u_int rpl_size; 169 struct scsi_report_luns_data *luns; 170 struct mtx luns_mtx; /* Protection for luns field. */ 171 }; 172 173 /* 174 * Each bus is represented by an EB (Existing Bus). These entries 175 * are created by calls to xpt_bus_register and deleted by calls to 176 * xpt_bus_deregister. 177 */ 178 struct cam_eb { 179 TAILQ_HEAD(, cam_et) et_entries; 180 TAILQ_ENTRY(cam_eb) links; 181 path_id_t path_id; 182 struct cam_sim *sim; 183 struct timeval last_reset; 184 u_int32_t flags; 185 #define CAM_EB_RUNQ_SCHEDULED 0x01 186 u_int32_t refcount; 187 u_int generation; 188 device_t parent_dev; 189 struct xpt_xport *xport; 190 struct mtx eb_mtx; /* Bus topology mutex. */ 191 }; 192 193 struct cam_path { 194 struct cam_periph *periph; 195 struct cam_eb *bus; 196 struct cam_et *target; 197 struct cam_ed *device; 198 }; 199 200 struct cam_ed * xpt_alloc_device(struct cam_eb *bus, 201 struct cam_et *target, 202 lun_id_t lun_id); 203 void xpt_acquire_device(struct cam_ed *device); 204 void xpt_release_device(struct cam_ed *device); 205 u_int32_t xpt_dev_ccbq_resize(struct cam_path *path, int newopenings); 206 void xpt_start_tags(struct cam_path *path); 207 void xpt_stop_tags(struct cam_path *path); 208 209 MALLOC_DECLARE(M_CAMXPT); 210 211 #endif 212