1 /* 2 * CAM request queue management definitions. 3 * 4 * Copyright (c) 1997 Justin T. Gibbs. 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions, and the following disclaimer, 12 * without modification, immediately at the beginning of the file. 13 * 2. The name of the author may not be used to endorse or promote products 14 * derived from this software without specific prior written permission. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 19 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR 20 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 22 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 26 * SUCH DAMAGE. 27 * 28 * $Id: cam_queue.h,v 1.2 1998/12/15 08:12:03 gibbs Exp $ 29 */ 30 31 #ifndef _CAM_CAM_QUEUE_H 32 #define _CAM_CAM_QUEUE_H 1 33 34 #ifdef KERNEL 35 36 #include <sys/queue.h> 37 38 /* 39 * This structure implements a heap based priority queue. The queue 40 * assumes that the objects stored in it begin with a cam_qentry 41 * structure holding the priority information used to sort the objects. 42 * This structure is opaque to clients (outside of the XPT layer) to allow 43 * the implementation to change without affecting them. 44 */ 45 struct camq { 46 cam_pinfo **queue_array; 47 int array_size; 48 int entries; 49 u_int32_t generation; 50 u_int32_t qfrozen_cnt; 51 }; 52 53 TAILQ_HEAD(ccb_hdr_tailq, ccb_hdr); 54 LIST_HEAD(ccb_hdr_list, ccb_hdr); 55 SLIST_HEAD(ccb_hdr_slist, ccb_hdr); 56 57 struct cam_ccbq { 58 struct camq queue; 59 int devq_openings; 60 int dev_openings; 61 int dev_active; 62 int held; 63 struct ccb_hdr_tailq active_ccbs; 64 }; 65 66 struct cam_ed; 67 68 struct cam_devq { 69 struct camq alloc_queue; 70 struct camq send_queue; 71 struct cam_ed *active_dev; 72 int alloc_openings; 73 int alloc_active; 74 int send_openings; 75 int send_active; 76 }; 77 78 79 struct cam_devq *cam_devq_alloc(int devices, int openings); 80 81 int cam_devq_init(struct cam_devq *devq, int devices, 82 int openings); 83 84 void cam_devq_free(struct cam_devq *devq); 85 86 u_int32_t cam_devq_resize(struct cam_devq *camq, int openings); 87 88 /* 89 * Allocate a cam_ccb_queue structure and initialize it. 90 */ 91 struct cam_ccbq *cam_ccbq_alloc(int openings); 92 93 u_int32_t cam_ccbq_resize(struct cam_ccbq *ccbq, int devices); 94 95 int cam_ccbq_init(struct cam_ccbq *ccbq, int openings); 96 97 void cam_ccbq_free(struct cam_ccbq *ccbq); 98 99 void cam_ccbq_fini(struct cam_ccbq *ccbq); 100 101 /* 102 * Allocate and initialize a cam_queue structure. 103 */ 104 struct camq *camq_alloc(int size); 105 106 /* 107 * Resize a cam queue 108 */ 109 u_int32_t camq_resize(struct camq *queue, int new_size); 110 111 /* 112 * Initialize a camq structure. Return 0 on success, 1 on failure. 113 */ 114 int camq_init(struct camq *camq, int size); 115 116 /* 117 * Free a cam_queue structure. This should only be called if a controller 118 * driver failes somehow during its attach routine or is unloaded and has 119 * obtained a cam_queue structure. 120 */ 121 void camq_free(struct camq *queue); 122 123 /* 124 * Finialize any internal storage or state of a cam_queue. 125 */ 126 void camq_fini(struct camq *queue); 127 128 /* 129 * cam_queue_insert: Given a CAM queue with at least one open spot, 130 * insert the new entry maintaining order. 131 */ 132 void camq_insert(struct camq *queue, cam_pinfo *new_entry); 133 134 /* 135 * camq_remove: Remove and arbitrary entry from the queue maintaining 136 * queue order. 137 */ 138 cam_pinfo *camq_remove(struct camq *queue, int index); 139 140 /* 141 * camq_change_priority: Raise or lower the priority of an entry 142 * maintaining queue order. 143 */ 144 void camq_change_priority(struct camq *queue, int index, 145 u_int32_t new_priority); 146 147 static __inline int 148 cam_ccbq_pending_ccb_count(struct cam_ccbq *ccbq); 149 150 static __inline void 151 cam_ccbq_take_opening(struct cam_ccbq *ccbq); 152 153 static __inline void 154 cam_ccbq_insert_ccb(struct cam_ccbq *ccbq, union ccb *new_ccb); 155 156 static __inline void 157 cam_ccbq_remove_ccb(struct cam_ccbq *ccbq, union ccb *ccb); 158 159 static __inline union ccb * 160 cam_ccbq_peek_ccb(struct cam_ccbq *ccbq, int index); 161 162 static __inline void 163 cam_ccbq_send_ccb(struct cam_ccbq *queue, union ccb *send_ccb); 164 165 static __inline void 166 cam_ccbq_ccb_done(struct cam_ccbq *ccbq, union ccb *done_ccb); 167 168 static __inline void 169 cam_ccbq_release_opening(struct cam_ccbq *ccbq); 170 171 172 static __inline int 173 cam_ccbq_pending_ccb_count(struct cam_ccbq *ccbq) 174 { 175 return (ccbq->queue.entries); 176 } 177 178 static __inline void 179 cam_ccbq_take_opening(struct cam_ccbq *ccbq) 180 { 181 ccbq->devq_openings--; 182 ccbq->held++; 183 } 184 185 static __inline void 186 cam_ccbq_insert_ccb(struct cam_ccbq *ccbq, union ccb *new_ccb) 187 { 188 ccbq->held--; 189 camq_insert(&ccbq->queue, &new_ccb->ccb_h.pinfo); 190 } 191 192 static __inline void 193 cam_ccbq_remove_ccb(struct cam_ccbq *ccbq, union ccb *ccb) 194 { 195 camq_remove(&ccbq->queue, ccb->ccb_h.pinfo.index); 196 } 197 198 static __inline union ccb * 199 cam_ccbq_peek_ccb(struct cam_ccbq *ccbq, int index) 200 { 201 return((union ccb *)ccbq->queue.queue_array[index]); 202 } 203 204 static __inline void 205 cam_ccbq_send_ccb(struct cam_ccbq *ccbq, union ccb *send_ccb) 206 { 207 208 TAILQ_INSERT_TAIL(&ccbq->active_ccbs, 209 &(send_ccb->ccb_h), 210 xpt_links.tqe); 211 send_ccb->ccb_h.pinfo.index = CAM_ACTIVE_INDEX; 212 ccbq->dev_active++; 213 ccbq->dev_openings--; 214 } 215 216 static __inline void 217 cam_ccbq_ccb_done(struct cam_ccbq *ccbq, union ccb *done_ccb) 218 { 219 TAILQ_REMOVE(&ccbq->active_ccbs, &done_ccb->ccb_h, 220 xpt_links.tqe); 221 ccbq->dev_active--; 222 ccbq->dev_openings++; 223 ccbq->held++; 224 } 225 226 static __inline void 227 cam_ccbq_release_opening(struct cam_ccbq *ccbq) 228 { 229 ccbq->held--; 230 ccbq->devq_openings++; 231 } 232 233 #endif /* KERNEL */ 234 #endif /* _CAM_CAM_QUEUE_H */ 235