1 /* 2 * Data structures and definitions for CAM Control Blocks (CCBs). 3 * 4 * Copyright (c) 1997, 1998 Justin T. Gibbs. 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions, and the following disclaimer, 12 * without modification, immediately at the beginning of the file. 13 * 2. The name of the author may not be used to endorse or promote products 14 * derived from this software without specific prior written permission. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 19 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR 20 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 22 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 26 * SUCH DAMAGE. 27 * 28 * $FreeBSD$ 29 */ 30 31 #ifndef _CAM_CAM_CCB_H 32 #define _CAM_CAM_CCB_H 1 33 34 #include <sys/queue.h> 35 #include <sys/cdefs.h> 36 #include <sys/time.h> 37 #ifdef CAM_NEW_TRAN_CODE 38 #include <machine/limits.h> 39 #endif /* CAM_NEW_TRAN_CODE */ 40 #ifndef _KERNEL 41 #include <sys/callout.h> 42 #endif 43 #include <cam/cam_debug.h> 44 #include <cam/scsi/scsi_all.h> 45 46 47 /* General allocation length definitions for CCB structures */ 48 #define IOCDBLEN CAM_MAX_CDBLEN /* Space for CDB bytes/pointer */ 49 #define VUHBALEN 14 /* Vendor Unique HBA length */ 50 #define SIM_IDLEN 16 /* ASCII string len for SIM ID */ 51 #define HBA_IDLEN 16 /* ASCII string len for HBA ID */ 52 #define DEV_IDLEN 16 /* ASCII string len for device names */ 53 #define CCB_PERIPH_PRIV_SIZE 2 /* size of peripheral private area */ 54 #define CCB_SIM_PRIV_SIZE 2 /* size of sim private area */ 55 56 /* Struct definitions for CAM control blocks */ 57 58 /* Common CCB header */ 59 /* CAM CCB flags */ 60 typedef enum { 61 CAM_CDB_POINTER = 0x00000001,/* The CDB field is a pointer */ 62 CAM_QUEUE_ENABLE = 0x00000002,/* SIM queue actions are enabled */ 63 CAM_CDB_LINKED = 0x00000004,/* CCB contains a linked CDB */ 64 CAM_NEGOTIATE = 0x00000008,/* 65 * Perform transport negotiation 66 * with this command. 67 */ 68 CAM_SCATTER_VALID = 0x00000010,/* Scatter/gather list is valid */ 69 CAM_DIS_AUTOSENSE = 0x00000020,/* Disable autosense feature */ 70 CAM_DIR_RESV = 0x00000000,/* Data direction (00:reserved) */ 71 CAM_DIR_IN = 0x00000040,/* Data direction (01:DATA IN) */ 72 CAM_DIR_OUT = 0x00000080,/* Data direction (10:DATA OUT) */ 73 CAM_DIR_NONE = 0x000000C0,/* Data direction (11:no data) */ 74 CAM_DIR_MASK = 0x000000C0,/* Data direction Mask */ 75 CAM_SOFT_RST_OP = 0x00000100,/* Use Soft reset alternative */ 76 CAM_ENG_SYNC = 0x00000200,/* Flush resid bytes on complete */ 77 CAM_DEV_QFRZDIS = 0x00000400,/* Disable DEV Q freezing */ 78 CAM_DEV_QFREEZE = 0x00000800,/* Freeze DEV Q on execution */ 79 CAM_HIGH_POWER = 0x00001000,/* Command takes a lot of power */ 80 CAM_SENSE_PTR = 0x00002000,/* Sense data is a pointer */ 81 CAM_SENSE_PHYS = 0x00004000,/* Sense pointer is physical addr*/ 82 CAM_TAG_ACTION_VALID = 0x00008000,/* Use the tag action in this ccb*/ 83 CAM_PASS_ERR_RECOVER = 0x00010000,/* Pass driver does err. recovery*/ 84 CAM_DIS_DISCONNECT = 0x00020000,/* Disable disconnect */ 85 CAM_SG_LIST_PHYS = 0x00040000,/* SG list has physical addrs. */ 86 CAM_MSG_BUF_PHYS = 0x00080000,/* Message buffer ptr is physical*/ 87 CAM_SNS_BUF_PHYS = 0x00100000,/* Autosense data ptr is physical*/ 88 CAM_DATA_PHYS = 0x00200000,/* SG/Buffer data ptrs are phys. */ 89 CAM_CDB_PHYS = 0x00400000,/* CDB poiner is physical */ 90 CAM_ENG_SGLIST = 0x00800000,/* SG list is for the HBA engine */ 91 92 /* Phase cognizant mode flags */ 93 CAM_DIS_AUTOSRP = 0x01000000,/* Disable autosave/restore ptrs */ 94 CAM_DIS_AUTODISC = 0x02000000,/* Disable auto disconnect */ 95 CAM_TGT_CCB_AVAIL = 0x04000000,/* Target CCB available */ 96 CAM_TGT_PHASE_MODE = 0x08000000,/* The SIM runs in phase mode */ 97 CAM_MSGB_VALID = 0x10000000,/* Message buffer valid */ 98 CAM_STATUS_VALID = 0x20000000,/* Status buffer valid */ 99 CAM_DATAB_VALID = 0x40000000,/* Data buffer valid */ 100 101 /* Host target Mode flags */ 102 CAM_SEND_SENSE = 0x08000000,/* Send sense data with status */ 103 CAM_TERM_IO = 0x10000000,/* Terminate I/O Message sup. */ 104 CAM_DISCONNECT = 0x20000000,/* Disconnects are mandatory */ 105 CAM_SEND_STATUS = 0x40000000 /* Send status after data phase */ 106 } ccb_flags; 107 108 /* XPT Opcodes for xpt_action */ 109 typedef enum { 110 /* Function code flags are bits greater than 0xff */ 111 XPT_FC_QUEUED = 0x100, 112 /* Non-immediate function code */ 113 XPT_FC_USER_CCB = 0x200, 114 XPT_FC_XPT_ONLY = 0x400, 115 /* Only for the transport layer device */ 116 XPT_FC_DEV_QUEUED = 0x800 | XPT_FC_QUEUED, 117 /* Passes through the device queues */ 118 /* Common function commands: 0x00->0x0F */ 119 XPT_NOOP = 0x00, 120 /* Execute Nothing */ 121 XPT_SCSI_IO = 0x01 | XPT_FC_DEV_QUEUED, 122 /* Execute the requested I/O operation */ 123 XPT_GDEV_TYPE = 0x02, 124 /* Get type information for specified device */ 125 XPT_GDEVLIST = 0x03, 126 /* Get a list of peripheral devices */ 127 XPT_PATH_INQ = 0x04, 128 /* Path routing inquiry */ 129 XPT_REL_SIMQ = 0x05, 130 /* Release a frozen SIM queue */ 131 XPT_SASYNC_CB = 0x06, 132 /* Set Asynchronous Callback Parameters */ 133 XPT_SDEV_TYPE = 0x07, 134 /* Set device type information */ 135 XPT_SCAN_BUS = 0x08 | XPT_FC_QUEUED | XPT_FC_USER_CCB 136 | XPT_FC_XPT_ONLY, 137 /* (Re)Scan the SCSI Bus */ 138 XPT_DEV_MATCH = 0x09 | XPT_FC_XPT_ONLY, 139 /* Get EDT entries matching the given pattern */ 140 XPT_DEBUG = 0x0a, 141 /* Turn on debugging for a bus, target or lun */ 142 XPT_PATH_STATS = 0x0b, 143 /* Path statistics (error counts, etc.) */ 144 XPT_GDEV_STATS = 0x0c, 145 /* Device statistics (error counts, etc.) */ 146 /* SCSI Control Functions: 0x10->0x1F */ 147 XPT_ABORT = 0x10, 148 /* Abort the specified CCB */ 149 XPT_RESET_BUS = 0x11 | XPT_FC_XPT_ONLY, 150 /* Reset the specified SCSI bus */ 151 XPT_RESET_DEV = 0x12 | XPT_FC_DEV_QUEUED, 152 /* Bus Device Reset the specified SCSI device */ 153 XPT_TERM_IO = 0x13, 154 /* Terminate the I/O process */ 155 XPT_SCAN_LUN = 0x14 | XPT_FC_QUEUED | XPT_FC_USER_CCB 156 | XPT_FC_XPT_ONLY, 157 /* Scan Logical Unit */ 158 XPT_GET_TRAN_SETTINGS = 0x15, 159 /* 160 * Get default/user transfer settings 161 * for the target 162 */ 163 XPT_SET_TRAN_SETTINGS = 0x16, 164 /* 165 * Set transfer rate/width 166 * negotiation settings 167 */ 168 XPT_CALC_GEOMETRY = 0x17, 169 /* 170 * Calculate the geometry parameters for 171 * a device give the sector size and 172 * volume size. 173 */ 174 175 /* HBA engine commands 0x20->0x2F */ 176 XPT_ENG_INQ = 0x20 | XPT_FC_XPT_ONLY, 177 /* HBA engine feature inquiry */ 178 XPT_ENG_EXEC = 0x21 | XPT_FC_DEV_QUEUED, 179 /* HBA execute engine request */ 180 181 /* Target mode commands: 0x30->0x3F */ 182 XPT_EN_LUN = 0x30, 183 /* Enable LUN as a target */ 184 XPT_TARGET_IO = 0x31 | XPT_FC_DEV_QUEUED, 185 /* Execute target I/O request */ 186 XPT_ACCEPT_TARGET_IO = 0x32 | XPT_FC_QUEUED | XPT_FC_USER_CCB, 187 /* Accept Host Target Mode CDB */ 188 XPT_CONT_TARGET_IO = 0x33 | XPT_FC_DEV_QUEUED, 189 /* Continue Host Target I/O Connection */ 190 XPT_IMMED_NOTIFY = 0x34 | XPT_FC_QUEUED | XPT_FC_USER_CCB, 191 /* Notify Host Target driver of event */ 192 XPT_NOTIFY_ACK = 0x35, 193 /* Acknowledgement of event */ 194 195 /* Vendor Unique codes: 0x80->0x8F */ 196 XPT_VUNIQUE = 0x80 197 } xpt_opcode; 198 199 #define XPT_FC_GROUP_MASK 0xF0 200 #define XPT_FC_GROUP(op) ((op) & XPT_FC_GROUP_MASK) 201 #define XPT_FC_GROUP_COMMON 0x00 202 #define XPT_FC_GROUP_SCSI_CONTROL 0x10 203 #define XPT_FC_GROUP_HBA_ENGINE 0x20 204 #define XPT_FC_GROUP_TMODE 0x30 205 #define XPT_FC_GROUP_VENDOR_UNIQUE 0x80 206 207 #define XPT_FC_IS_DEV_QUEUED(ccb) \ 208 (((ccb)->ccb_h.func_code & XPT_FC_DEV_QUEUED) == XPT_FC_DEV_QUEUED) 209 #define XPT_FC_IS_QUEUED(ccb) \ 210 (((ccb)->ccb_h.func_code & XPT_FC_QUEUED) != 0) 211 212 #ifdef CAM_NEW_TRAN_CODE 213 typedef enum { 214 PROTO_UNKNOWN, 215 PROTO_UNSPECIFIED, 216 PROTO_SCSI, /* Small Computer System Interface */ 217 PROTO_ATA, /* AT Attachment */ 218 PROTO_ATAPI, /* AT Attachment Packetized Interface */ 219 } cam_proto; 220 221 typedef enum { 222 XPORT_UNKNOWN, 223 XPORT_UNSPECIFIED, 224 XPORT_SPI, /* SCSI Parallel Interface */ 225 XPORT_FC, /* Fiber Channel */ 226 XPORT_SSA, /* Serial Storage Architecture */ 227 XPORT_USB, /* Universal Serial Bus */ 228 XPORT_PPB, /* Parallel Port Bus */ 229 XPORT_ATA /* AT Attachment */ 230 } cam_xport; 231 232 #define PROTO_VERSION_UNKNOWN (UINT_MAX - 1) 233 #define PROTO_VERSION_UNSPECIFIED UINT_MAX 234 #define XPORT_VERSION_UNKNOWN (UINT_MAX - 1) 235 #define XPORT_VERSION_UNSPECIFIED UINT_MAX 236 #endif /* CAM_NEW_TRAN_CODE */ 237 238 typedef union { 239 LIST_ENTRY(ccb_hdr) le; 240 SLIST_ENTRY(ccb_hdr) sle; 241 TAILQ_ENTRY(ccb_hdr) tqe; 242 STAILQ_ENTRY(ccb_hdr) stqe; 243 } camq_entry; 244 245 typedef union { 246 void *ptr; 247 u_long field; 248 u_int8_t bytes[sizeof(void *) > sizeof(u_long) 249 ? sizeof(void *) : sizeof(u_long)]; 250 } ccb_priv_entry; 251 252 typedef union { 253 ccb_priv_entry entries[CCB_PERIPH_PRIV_SIZE]; 254 u_int8_t bytes[CCB_PERIPH_PRIV_SIZE * sizeof(ccb_priv_entry)]; 255 } ccb_ppriv_area; 256 257 typedef union { 258 ccb_priv_entry entries[CCB_SIM_PRIV_SIZE]; 259 u_int8_t bytes[CCB_SIM_PRIV_SIZE * sizeof(ccb_priv_entry)]; 260 } ccb_spriv_area; 261 262 struct ccb_hdr { 263 cam_pinfo pinfo; /* Info for priority scheduling */ 264 camq_entry xpt_links; /* For chaining in the XPT layer */ 265 camq_entry sim_links; /* For chaining in the SIM layer */ 266 camq_entry periph_links;/* For chaining in the type driver */ 267 u_int32_t retry_count; 268 /* Callback on completion function */ 269 void (*cbfcnp)(struct cam_periph *, union ccb *); 270 xpt_opcode func_code; /* XPT function code */ 271 u_int32_t status; /* Status returned by CAM subsystem */ 272 /* Compiled path for this ccb */ 273 struct cam_path *path; 274 path_id_t path_id; /* Path ID for the request */ 275 target_id_t target_id; /* Target device ID */ 276 lun_id_t target_lun; /* Target LUN number */ 277 u_int32_t flags; 278 ccb_ppriv_area periph_priv; 279 ccb_spriv_area sim_priv; 280 u_int32_t timeout; /* Timeout value */ 281 /* Callout handle used for timeouts */ 282 struct callout_handle timeout_ch; 283 }; 284 285 /* Get Device Information CCB */ 286 struct ccb_getdev { 287 struct ccb_hdr ccb_h; 288 struct scsi_inquiry_data inq_data; 289 u_int8_t serial_num[252]; 290 u_int8_t reserved; 291 u_int8_t serial_num_len; 292 }; 293 294 /* Device Statistics CCB */ 295 struct ccb_getdevstats { 296 struct ccb_hdr ccb_h; 297 int dev_openings; /* Space left for more work on device*/ 298 int dev_active; /* Transactions running on the device */ 299 int devq_openings; /* Space left for more queued work */ 300 int devq_queued; /* Transactions queued to be sent */ 301 int held; /* 302 * CCBs held by peripheral drivers 303 * for this device 304 */ 305 int maxtags; /* 306 * Boundary conditions for number of 307 * tagged operations 308 */ 309 int mintags; 310 struct timeval last_reset; /* Time of last bus reset/loop init */ 311 }; 312 313 typedef enum { 314 CAM_GDEVLIST_LAST_DEVICE, 315 CAM_GDEVLIST_LIST_CHANGED, 316 CAM_GDEVLIST_MORE_DEVS, 317 CAM_GDEVLIST_ERROR 318 } ccb_getdevlist_status_e; 319 320 struct ccb_getdevlist { 321 struct ccb_hdr ccb_h; 322 char periph_name[DEV_IDLEN]; 323 u_int32_t unit_number; 324 unsigned int generation; 325 u_int32_t index; 326 ccb_getdevlist_status_e status; 327 }; 328 329 typedef enum { 330 PERIPH_MATCH_NONE = 0x000, 331 PERIPH_MATCH_PATH = 0x001, 332 PERIPH_MATCH_TARGET = 0x002, 333 PERIPH_MATCH_LUN = 0x004, 334 PERIPH_MATCH_NAME = 0x008, 335 PERIPH_MATCH_UNIT = 0x010, 336 PERIPH_MATCH_ANY = 0x01f 337 } periph_pattern_flags; 338 339 struct periph_match_pattern { 340 char periph_name[DEV_IDLEN]; 341 u_int32_t unit_number; 342 path_id_t path_id; 343 target_id_t target_id; 344 lun_id_t target_lun; 345 periph_pattern_flags flags; 346 }; 347 348 typedef enum { 349 DEV_MATCH_NONE = 0x000, 350 DEV_MATCH_PATH = 0x001, 351 DEV_MATCH_TARGET = 0x002, 352 DEV_MATCH_LUN = 0x004, 353 DEV_MATCH_INQUIRY = 0x008, 354 DEV_MATCH_ANY = 0x00f 355 } dev_pattern_flags; 356 357 struct device_match_pattern { 358 path_id_t path_id; 359 target_id_t target_id; 360 lun_id_t target_lun; 361 struct scsi_static_inquiry_pattern inq_pat; 362 dev_pattern_flags flags; 363 }; 364 365 typedef enum { 366 BUS_MATCH_NONE = 0x000, 367 BUS_MATCH_PATH = 0x001, 368 BUS_MATCH_NAME = 0x002, 369 BUS_MATCH_UNIT = 0x004, 370 BUS_MATCH_BUS_ID = 0x008, 371 BUS_MATCH_ANY = 0x00f 372 } bus_pattern_flags; 373 374 struct bus_match_pattern { 375 path_id_t path_id; 376 char dev_name[DEV_IDLEN]; 377 u_int32_t unit_number; 378 u_int32_t bus_id; 379 bus_pattern_flags flags; 380 }; 381 382 union match_pattern { 383 struct periph_match_pattern periph_pattern; 384 struct device_match_pattern device_pattern; 385 struct bus_match_pattern bus_pattern; 386 }; 387 388 typedef enum { 389 DEV_MATCH_PERIPH, 390 DEV_MATCH_DEVICE, 391 DEV_MATCH_BUS 392 } dev_match_type; 393 394 struct dev_match_pattern { 395 dev_match_type type; 396 union match_pattern pattern; 397 }; 398 399 struct periph_match_result { 400 char periph_name[DEV_IDLEN]; 401 u_int32_t unit_number; 402 path_id_t path_id; 403 target_id_t target_id; 404 lun_id_t target_lun; 405 }; 406 407 typedef enum { 408 DEV_RESULT_NOFLAG = 0x00, 409 DEV_RESULT_UNCONFIGURED = 0x01 410 } dev_result_flags; 411 412 struct device_match_result { 413 path_id_t path_id; 414 target_id_t target_id; 415 lun_id_t target_lun; 416 struct scsi_inquiry_data inq_data; 417 dev_result_flags flags; 418 }; 419 420 struct bus_match_result { 421 path_id_t path_id; 422 char dev_name[DEV_IDLEN]; 423 u_int32_t unit_number; 424 u_int32_t bus_id; 425 }; 426 427 union match_result { 428 struct periph_match_result periph_result; 429 struct device_match_result device_result; 430 struct bus_match_result bus_result; 431 }; 432 433 struct dev_match_result { 434 dev_match_type type; 435 union match_result result; 436 }; 437 438 typedef enum { 439 CAM_DEV_MATCH_LAST, 440 CAM_DEV_MATCH_MORE, 441 CAM_DEV_MATCH_LIST_CHANGED, 442 CAM_DEV_MATCH_SIZE_ERROR, 443 CAM_DEV_MATCH_ERROR 444 } ccb_dev_match_status; 445 446 typedef enum { 447 CAM_DEV_POS_NONE = 0x000, 448 CAM_DEV_POS_BUS = 0x001, 449 CAM_DEV_POS_TARGET = 0x002, 450 CAM_DEV_POS_DEVICE = 0x004, 451 CAM_DEV_POS_PERIPH = 0x008, 452 CAM_DEV_POS_PDPTR = 0x010, 453 CAM_DEV_POS_TYPEMASK = 0xf00, 454 CAM_DEV_POS_EDT = 0x100, 455 CAM_DEV_POS_PDRV = 0x200 456 } dev_pos_type; 457 458 struct ccb_dm_cookie { 459 void *bus; 460 void *target; 461 void *device; 462 void *periph; 463 void *pdrv; 464 }; 465 466 struct ccb_dev_position { 467 u_int generations[4]; 468 #define CAM_BUS_GENERATION 0x00 469 #define CAM_TARGET_GENERATION 0x01 470 #define CAM_DEV_GENERATION 0x02 471 #define CAM_PERIPH_GENERATION 0x03 472 dev_pos_type position_type; 473 struct ccb_dm_cookie cookie; 474 }; 475 476 struct ccb_dev_match { 477 struct ccb_hdr ccb_h; 478 ccb_dev_match_status status; 479 u_int32_t num_patterns; 480 u_int32_t pattern_buf_len; 481 struct dev_match_pattern *patterns; 482 u_int32_t num_matches; 483 u_int32_t match_buf_len; 484 struct dev_match_result *matches; 485 struct ccb_dev_position pos; 486 }; 487 488 /* 489 * Definitions for the path inquiry CCB fields. 490 */ 491 #define CAM_VERSION 0x14 /* Hex value for current version */ 492 493 typedef enum { 494 PI_MDP_ABLE = 0x80, /* Supports MDP message */ 495 PI_WIDE_32 = 0x40, /* Supports 32 bit wide SCSI */ 496 PI_WIDE_16 = 0x20, /* Supports 16 bit wide SCSI */ 497 PI_SDTR_ABLE = 0x10, /* Supports SDTR message */ 498 PI_LINKED_CDB = 0x08, /* Supports linked CDBs */ 499 PI_TAG_ABLE = 0x02, /* Supports tag queue messages */ 500 PI_SOFT_RST = 0x01 /* Supports soft reset alternative */ 501 } pi_inqflag; 502 503 typedef enum { 504 PIT_PROCESSOR = 0x80, /* Target mode processor mode */ 505 PIT_PHASE = 0x40, /* Target mode phase cog. mode */ 506 PIT_DISCONNECT = 0x20, /* Disconnects supported in target mode */ 507 PIT_TERM_IO = 0x10, /* Terminate I/O message supported in TM */ 508 PIT_GRP_6 = 0x08, /* Group 6 commands supported */ 509 PIT_GRP_7 = 0x04 /* Group 7 commands supported */ 510 } pi_tmflag; 511 512 typedef enum { 513 PIM_SCANHILO = 0x80, /* Bus scans from high ID to low ID */ 514 PIM_NOREMOVE = 0x40, /* Removeable devices not included in scan */ 515 PIM_NOINITIATOR = 0x20, /* Initiator role not supported. */ 516 PIM_NOBUSRESET = 0x10 /* User has disabled initial BUS RESET */ 517 } pi_miscflag; 518 519 #ifdef CAM_NEW_TRAN_CODE 520 /* Path Inquiry CCB */ 521 struct ccb_pathinq_settings_spi { 522 u_int8_t ppr_options; 523 }; 524 #endif /* CAM_NEW_TRAN_CODE */ 525 526 struct ccb_pathinq { 527 struct ccb_hdr ccb_h; 528 u_int8_t version_num; /* Version number for the SIM/HBA */ 529 u_int8_t hba_inquiry; /* Mimic of INQ byte 7 for the HBA */ 530 u_int8_t target_sprt; /* Flags for target mode support */ 531 u_int8_t hba_misc; /* Misc HBA features */ 532 u_int16_t hba_eng_cnt; /* HBA engine count */ 533 /* Vendor Unique capabilities */ 534 u_int8_t vuhba_flags[VUHBALEN]; 535 u_int32_t max_target; /* Maximum supported Target */ 536 u_int32_t max_lun; /* Maximum supported Lun */ 537 u_int32_t async_flags; /* Installed Async handlers */ 538 path_id_t hpath_id; /* Highest Path ID in the subsystem */ 539 target_id_t initiator_id; /* ID of the HBA on the SCSI bus */ 540 char sim_vid[SIM_IDLEN]; /* Vendor ID of the SIM */ 541 char hba_vid[HBA_IDLEN]; /* Vendor ID of the HBA */ 542 char dev_name[DEV_IDLEN];/* Device name for SIM */ 543 u_int32_t unit_number; /* Unit number for SIM */ 544 u_int32_t bus_id; /* Bus ID for SIM */ 545 u_int32_t base_transfer_speed;/* Base bus speed in KB/sec */ 546 #ifdef CAM_NEW_TRAN_CODE 547 cam_proto protocol; 548 u_int protocol_version; 549 cam_xport transport; 550 u_int transport_version; 551 union { 552 struct ccb_pathinq_settings_spi spi; 553 } xport_specific; 554 #endif /* CAM_NEW_TRAN_CODE */ 555 }; 556 557 /* Path Statistics CCB */ 558 struct ccb_pathstats { 559 struct ccb_hdr ccb_h; 560 struct timeval last_reset; /* Time of last bus reset/loop init */ 561 }; 562 563 typedef union { 564 u_int8_t *sense_ptr; /* 565 * Pointer to storage 566 * for sense information 567 */ 568 /* Storage Area for sense information */ 569 struct scsi_sense_data sense_buf; 570 } sense_t; 571 572 typedef union { 573 u_int8_t *cdb_ptr; /* Pointer to the CDB bytes to send */ 574 /* Area for the CDB send */ 575 u_int8_t cdb_bytes[IOCDBLEN]; 576 } cdb_t; 577 578 /* 579 * SCSI I/O Request CCB used for the XPT_SCSI_IO and XPT_CONT_TARGET_IO 580 * function codes. 581 */ 582 struct ccb_scsiio { 583 struct ccb_hdr ccb_h; 584 union ccb *next_ccb; /* Ptr for next CCB for action */ 585 u_int8_t *req_map; /* Ptr to mapping info */ 586 u_int8_t *data_ptr; /* Ptr to the data buf/SG list */ 587 u_int32_t dxfer_len; /* Data transfer length */ 588 /* Autosense storage */ 589 struct scsi_sense_data sense_data; 590 u_int8_t sense_len; /* Number of bytes to autosense */ 591 u_int8_t cdb_len; /* Number of bytes for the CDB */ 592 u_int16_t sglist_cnt; /* Number of SG list entries */ 593 u_int8_t scsi_status; /* Returned SCSI status */ 594 u_int8_t sense_resid; /* Autosense resid length: 2's comp */ 595 u_int32_t resid; /* Transfer residual length: 2's comp */ 596 cdb_t cdb_io; /* Union for CDB bytes/pointer */ 597 u_int8_t *msg_ptr; /* Pointer to the message buffer */ 598 u_int16_t msg_len; /* Number of bytes for the Message */ 599 u_int8_t tag_action; /* What to do for tag queueing */ 600 /* 601 * The tag action should be either the define below (to send a 602 * non-tagged transaction) or one of the defined scsi tag messages 603 * from scsi_message.h. 604 */ 605 #define CAM_TAG_ACTION_NONE 0x00 606 u_int tag_id; /* tag id from initator (target mode) */ 607 u_int init_id; /* initiator id of who selected */ 608 }; 609 610 struct ccb_accept_tio { 611 struct ccb_hdr ccb_h; 612 cdb_t cdb_io; /* Union for CDB bytes/pointer */ 613 u_int8_t cdb_len; /* Number of bytes for the CDB */ 614 u_int8_t tag_action; /* What to do for tag queueing */ 615 u_int8_t sense_len; /* Number of bytes of Sense Data */ 616 u_int tag_id; /* tag id from initator (target mode) */ 617 u_int init_id; /* initiator id of who selected */ 618 struct scsi_sense_data sense_data; 619 }; 620 621 /* Release SIM Queue */ 622 struct ccb_relsim { 623 struct ccb_hdr ccb_h; 624 u_int32_t release_flags; 625 #define RELSIM_ADJUST_OPENINGS 0x01 626 #define RELSIM_RELEASE_AFTER_TIMEOUT 0x02 627 #define RELSIM_RELEASE_AFTER_CMDCMPLT 0x04 628 #define RELSIM_RELEASE_AFTER_QEMPTY 0x08 629 u_int32_t openings; 630 u_int32_t release_timeout; 631 u_int32_t qfrozen_cnt; 632 }; 633 634 /* 635 * Definitions for the asynchronous callback CCB fields. 636 */ 637 typedef enum { 638 AC_GETDEV_CHANGED = 0x800,/* Getdev info might have changed */ 639 AC_INQ_CHANGED = 0x400,/* Inquiry info might have changed */ 640 AC_TRANSFER_NEG = 0x200,/* New transfer settings in effect */ 641 AC_LOST_DEVICE = 0x100,/* A device went away */ 642 AC_FOUND_DEVICE = 0x080,/* A new device was found */ 643 AC_PATH_DEREGISTERED = 0x040,/* A path has de-registered */ 644 AC_PATH_REGISTERED = 0x020,/* A new path has been registered */ 645 AC_SENT_BDR = 0x010,/* A BDR message was sent to target */ 646 AC_SCSI_AEN = 0x008,/* A SCSI AEN has been received */ 647 AC_UNSOL_RESEL = 0x002,/* Unsolicited reselection occurred */ 648 AC_BUS_RESET = 0x001 /* A SCSI bus reset occurred */ 649 } ac_code; 650 651 typedef void ac_callback_t (void *softc, u_int32_t code, 652 struct cam_path *path, void *args); 653 654 /* Set Asynchronous Callback CCB */ 655 struct ccb_setasync { 656 struct ccb_hdr ccb_h; 657 u_int32_t event_enable; /* Async Event enables */ 658 ac_callback_t *callback; 659 void *callback_arg; 660 }; 661 662 /* Set Device Type CCB */ 663 struct ccb_setdev { 664 struct ccb_hdr ccb_h; 665 u_int8_t dev_type; /* Value for dev type field in EDT */ 666 }; 667 668 /* SCSI Control Functions */ 669 670 /* Abort XPT request CCB */ 671 struct ccb_abort { 672 struct ccb_hdr ccb_h; 673 union ccb *abort_ccb; /* Pointer to CCB to abort */ 674 }; 675 676 /* Reset SCSI Bus CCB */ 677 struct ccb_resetbus { 678 struct ccb_hdr ccb_h; 679 }; 680 681 /* Reset SCSI Device CCB */ 682 struct ccb_resetdev { 683 struct ccb_hdr ccb_h; 684 }; 685 686 /* Terminate I/O Process Request CCB */ 687 struct ccb_termio { 688 struct ccb_hdr ccb_h; 689 union ccb *termio_ccb; /* Pointer to CCB to terminate */ 690 }; 691 692 #ifndef CAM_NEW_TRAN_CODE 693 /* Get/Set transfer rate/width/disconnection/tag queueing settings */ 694 struct ccb_trans_settings { 695 struct ccb_hdr ccb_h; 696 u_int valid; /* Which fields to honor */ 697 #define CCB_TRANS_SYNC_RATE_VALID 0x01 698 #define CCB_TRANS_SYNC_OFFSET_VALID 0x02 699 #define CCB_TRANS_BUS_WIDTH_VALID 0x04 700 #define CCB_TRANS_DISC_VALID 0x08 701 #define CCB_TRANS_TQ_VALID 0x10 702 u_int flags; 703 #define CCB_TRANS_CURRENT_SETTINGS 0x01 704 #define CCB_TRANS_USER_SETTINGS 0x02 705 #define CCB_TRANS_DISC_ENB 0x04 706 #define CCB_TRANS_TAG_ENB 0x08 707 u_int sync_period; 708 u_int sync_offset; 709 u_int bus_width; 710 }; 711 712 #else /* CAM_NEW_TRAN_CODE */ 713 typedef enum { 714 CTS_TYPE_CURRENT_SETTINGS, 715 CTS_TYPE_USER_SETTINGS 716 } cts_type; 717 718 struct ccb_trans_settings_scsi 719 { 720 u_int valid; /* Which fields to honor */ 721 #define CTS_SCSI_VALID_TQ 0x01 722 u_int flags; 723 #define CTS_SCSI_FLAGS_TAG_ENB 0x01 724 }; 725 726 struct ccb_trans_settings_spi 727 { 728 u_int valid; /* Which fields to honor */ 729 #define CTS_SPI_VALID_SYNC_RATE 0x01 730 #define CTS_SPI_VALID_SYNC_OFFSET 0x02 731 #define CTS_SPI_VALID_BUS_WIDTH 0x04 732 #define CTS_SPI_VALID_DISC 0x08 733 #define CTS_SPI_VALID_PPR_OPTIONS 0x10 734 u_int flags; 735 #define CTS_SPI_FLAGS_DISC_ENB 0x01 736 #define CTS_SPI_FLAGS_TAG_ENB 0x02 737 u_int sync_period; 738 u_int sync_offset; 739 u_int bus_width; 740 u_int ppr_options; 741 }; 742 743 /* Get/Set transfer rate/width/disconnection/tag queueing settings */ 744 struct ccb_trans_settings { 745 struct ccb_hdr ccb_h; 746 cts_type type; /* Current or User settings */ 747 cam_proto protocol; 748 u_int protocol_version; 749 cam_xport transport; 750 u_int transport_version; 751 union { 752 u_int valid; /* Which fields to honor */ 753 struct ccb_trans_settings_scsi scsi; 754 } proto_specific; 755 union { 756 u_int valid; /* Which fields to honor */ 757 struct ccb_trans_settings_spi spi; 758 } xport_specific; 759 }; 760 761 #endif /* CAM_NEW_TRAN_CODE */ 762 763 /* 764 * Calculate the geometry parameters for a device 765 * give the block size and volume size in blocks. 766 */ 767 struct ccb_calc_geometry { 768 struct ccb_hdr ccb_h; 769 u_int32_t block_size; 770 u_int32_t volume_size; 771 u_int16_t cylinders; 772 u_int8_t heads; 773 u_int8_t secs_per_track; 774 }; 775 776 /* 777 * Rescan the given bus, or bus/target/lun 778 */ 779 struct ccb_rescan { 780 struct ccb_hdr ccb_h; 781 cam_flags flags; 782 }; 783 784 /* 785 * Turn on debugging for the given bus, bus/target, or bus/target/lun. 786 */ 787 struct ccb_debug { 788 struct ccb_hdr ccb_h; 789 cam_debug_flags flags; 790 }; 791 792 /* Target mode structures. */ 793 794 struct ccb_en_lun { 795 struct ccb_hdr ccb_h; 796 u_int16_t grp6_len; /* Group 6 VU CDB length */ 797 u_int16_t grp7_len; /* Group 7 VU CDB length */ 798 u_int8_t enable; 799 }; 800 801 struct ccb_immed_notify { 802 struct ccb_hdr ccb_h; 803 struct scsi_sense_data sense_data; 804 u_int8_t sense_len; /* Number of bytes in sense buffer */ 805 u_int8_t initiator_id; /* Id of initiator that selected */ 806 u_int8_t message_args[7]; /* Message Arguments */ 807 }; 808 809 struct ccb_notify_ack { 810 struct ccb_hdr ccb_h; 811 u_int16_t seq_id; /* Sequence identifier */ 812 u_int8_t event; /* Event flags */ 813 }; 814 815 /* HBA engine structures. */ 816 817 typedef enum { 818 EIT_BUFFER, /* Engine type: buffer memory */ 819 EIT_LOSSLESS, /* Engine type: lossless compression */ 820 EIT_LOSSY, /* Engine type: lossy compression */ 821 EIT_ENCRYPT /* Engine type: encryption */ 822 } ei_type; 823 824 typedef enum { 825 EAD_VUNIQUE, /* Engine algorithm ID: vendor unique */ 826 EAD_LZ1V1, /* Engine algorithm ID: LZ1 var.1 */ 827 EAD_LZ2V1, /* Engine algorithm ID: LZ2 var.1 */ 828 EAD_LZ2V2 /* Engine algorithm ID: LZ2 var.2 */ 829 } ei_algo; 830 831 struct ccb_eng_inq { 832 struct ccb_hdr ccb_h; 833 u_int16_t eng_num; /* The engine number for this inquiry */ 834 ei_type eng_type; /* Returned engine type */ 835 ei_algo eng_algo; /* Returned engine algorithm type */ 836 u_int32_t eng_memeory; /* Returned engine memory size */ 837 }; 838 839 struct ccb_eng_exec { /* This structure must match SCSIIO size */ 840 struct ccb_hdr ccb_h; 841 u_int8_t *pdrv_ptr; /* Ptr used by the peripheral driver */ 842 u_int8_t *req_map; /* Ptr for mapping info on the req. */ 843 u_int8_t *data_ptr; /* Pointer to the data buf/SG list */ 844 u_int32_t dxfer_len; /* Data transfer length */ 845 u_int8_t *engdata_ptr; /* Pointer to the engine buffer data */ 846 u_int16_t sglist_cnt; /* Num of scatter gather list entries */ 847 u_int32_t dmax_len; /* Destination data maximum length */ 848 u_int32_t dest_len; /* Destination data length */ 849 int32_t src_resid; /* Source residual length: 2's comp */ 850 u_int32_t timeout; /* Timeout value */ 851 u_int16_t eng_num; /* Engine number for this request */ 852 u_int16_t vu_flags; /* Vendor Unique flags */ 853 }; 854 855 /* 856 * Definitions for the timeout field in the SCSI I/O CCB. 857 */ 858 #define CAM_TIME_DEFAULT 0x00000000 /* Use SIM default value */ 859 #define CAM_TIME_INFINITY 0xFFFFFFFF /* Infinite timeout */ 860 861 #define CAM_SUCCESS 0 /* For signaling general success */ 862 #define CAM_FAILURE 1 /* For signaling general failure */ 863 864 #define CAM_FALSE 0 865 #define CAM_TRUE 1 866 867 #define XPT_CCB_INVALID -1 /* for signaling a bad CCB to free */ 868 869 /* 870 * Union of all CCB types for kernel space allocation. This union should 871 * never be used for manipulating CCBs - its only use is for the allocation 872 * and deallocation of raw CCB space and is the return type of xpt_ccb_alloc 873 * and the argument to xpt_ccb_free. 874 */ 875 union ccb { 876 struct ccb_hdr ccb_h; /* For convenience */ 877 struct ccb_scsiio csio; 878 struct ccb_getdev cgd; 879 struct ccb_getdevlist cgdl; 880 struct ccb_pathinq cpi; 881 struct ccb_relsim crs; 882 struct ccb_setasync csa; 883 struct ccb_setdev csd; 884 struct ccb_pathstats cpis; 885 struct ccb_getdevstats cgds; 886 struct ccb_dev_match cdm; 887 struct ccb_trans_settings cts; 888 struct ccb_calc_geometry ccg; 889 struct ccb_abort cab; 890 struct ccb_resetbus crb; 891 struct ccb_resetdev crd; 892 struct ccb_termio tio; 893 struct ccb_accept_tio atio; 894 struct ccb_scsiio ctio; 895 struct ccb_en_lun cel; 896 struct ccb_immed_notify cin; 897 struct ccb_notify_ack cna; 898 struct ccb_eng_inq cei; 899 struct ccb_eng_exec cee; 900 struct ccb_rescan crcn; 901 struct ccb_debug cdbg; 902 }; 903 904 __BEGIN_DECLS 905 static __inline void 906 cam_fill_csio(struct ccb_scsiio *csio, u_int32_t retries, 907 void (*cbfcnp)(struct cam_periph *, union ccb *), 908 u_int32_t flags, u_int8_t tag_action, 909 u_int8_t *data_ptr, u_int32_t dxfer_len, 910 u_int8_t sense_len, u_int8_t cdb_len, 911 u_int32_t timeout); 912 913 static __inline void 914 cam_fill_ctio(struct ccb_scsiio *csio, u_int32_t retries, 915 void (*cbfcnp)(struct cam_periph *, union ccb *), 916 u_int32_t flags, u_int tag_action, u_int tag_id, 917 u_int init_id, u_int scsi_status, u_int8_t *data_ptr, 918 u_int32_t dxfer_len, u_int32_t timeout); 919 920 static __inline void 921 cam_fill_csio(struct ccb_scsiio *csio, u_int32_t retries, 922 void (*cbfcnp)(struct cam_periph *, union ccb *), 923 u_int32_t flags, u_int8_t tag_action, 924 u_int8_t *data_ptr, u_int32_t dxfer_len, 925 u_int8_t sense_len, u_int8_t cdb_len, 926 u_int32_t timeout) 927 { 928 csio->ccb_h.func_code = XPT_SCSI_IO; 929 csio->ccb_h.flags = flags; 930 csio->ccb_h.retry_count = retries; 931 csio->ccb_h.cbfcnp = cbfcnp; 932 csio->ccb_h.timeout = timeout; 933 csio->data_ptr = data_ptr; 934 csio->dxfer_len = dxfer_len; 935 csio->sense_len = sense_len; 936 csio->cdb_len = cdb_len; 937 csio->tag_action = tag_action; 938 } 939 940 static __inline void 941 cam_fill_ctio(struct ccb_scsiio *csio, u_int32_t retries, 942 void (*cbfcnp)(struct cam_periph *, union ccb *), 943 u_int32_t flags, u_int tag_action, u_int tag_id, 944 u_int init_id, u_int scsi_status, u_int8_t *data_ptr, 945 u_int32_t dxfer_len, u_int32_t timeout) 946 { 947 csio->ccb_h.func_code = XPT_CONT_TARGET_IO; 948 csio->ccb_h.flags = flags; 949 csio->ccb_h.retry_count = retries; 950 csio->ccb_h.cbfcnp = cbfcnp; 951 csio->ccb_h.timeout = timeout; 952 csio->data_ptr = data_ptr; 953 csio->dxfer_len = dxfer_len; 954 csio->scsi_status = scsi_status; 955 csio->tag_action = tag_action; 956 csio->tag_id = tag_id; 957 csio->init_id = init_id; 958 } 959 960 __END_DECLS 961 962 #endif /* _CAM_CAM_CCB_H */ 963