1 /*- 2 * Data structures and definitions for CAM Control Blocks (CCBs). 3 * 4 * Copyright (c) 1997, 1998 Justin T. Gibbs. 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions, and the following disclaimer, 12 * without modification, immediately at the beginning of the file. 13 * 2. The name of the author may not be used to endorse or promote products 14 * derived from this software without specific prior written permission. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 19 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR 20 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 22 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 26 * SUCH DAMAGE. 27 * 28 * $FreeBSD$ 29 */ 30 31 #ifndef _CAM_CAM_CCB_H 32 #define _CAM_CAM_CCB_H 1 33 34 #include <sys/queue.h> 35 #include <sys/cdefs.h> 36 #include <sys/time.h> 37 #include <sys/limits.h> 38 #ifndef _KERNEL 39 #include <sys/callout.h> 40 #endif 41 #include <cam/cam_debug.h> 42 #include <cam/scsi/scsi_all.h> 43 #include <cam/ata/ata_all.h> 44 45 /* General allocation length definitions for CCB structures */ 46 #define IOCDBLEN CAM_MAX_CDBLEN /* Space for CDB bytes/pointer */ 47 #define VUHBALEN 14 /* Vendor Unique HBA length */ 48 #define SIM_IDLEN 16 /* ASCII string len for SIM ID */ 49 #define HBA_IDLEN 16 /* ASCII string len for HBA ID */ 50 #define DEV_IDLEN 16 /* ASCII string len for device names */ 51 #define CCB_PERIPH_PRIV_SIZE 2 /* size of peripheral private area */ 52 #define CCB_SIM_PRIV_SIZE 2 /* size of sim private area */ 53 54 /* Struct definitions for CAM control blocks */ 55 56 /* Common CCB header */ 57 /* CAM CCB flags */ 58 typedef enum { 59 CAM_CDB_POINTER = 0x00000001,/* The CDB field is a pointer */ 60 CAM_QUEUE_ENABLE = 0x00000002,/* SIM queue actions are enabled */ 61 CAM_CDB_LINKED = 0x00000004,/* CCB contains a linked CDB */ 62 CAM_NEGOTIATE = 0x00000008,/* 63 * Perform transport negotiation 64 * with this command. 65 */ 66 CAM_DATA_ISPHYS = 0x00000010,/* Data type with physical addrs */ 67 CAM_DIS_AUTOSENSE = 0x00000020,/* Disable autosense feature */ 68 CAM_DIR_BOTH = 0x00000000,/* Data direction (00:IN/OUT) */ 69 CAM_DIR_IN = 0x00000040,/* Data direction (01:DATA IN) */ 70 CAM_DIR_OUT = 0x00000080,/* Data direction (10:DATA OUT) */ 71 CAM_DIR_NONE = 0x000000C0,/* Data direction (11:no data) */ 72 CAM_DIR_MASK = 0x000000C0,/* Data direction Mask */ 73 CAM_DATA_VADDR = 0x00000000,/* Data type (000:Virtual) */ 74 CAM_DATA_PADDR = 0x00000010,/* Data type (001:Physical) */ 75 CAM_DATA_SG = 0x00040000,/* Data type (010:sglist) */ 76 CAM_DATA_SG_PADDR = 0x00040010,/* Data type (011:sglist phys) */ 77 CAM_DATA_BIO = 0x00200000,/* Data type (100:bio) */ 78 CAM_DATA_MASK = 0x00240010,/* Data type mask */ 79 CAM_SOFT_RST_OP = 0x00000100,/* Use Soft reset alternative */ 80 CAM_ENG_SYNC = 0x00000200,/* Flush resid bytes on complete */ 81 CAM_DEV_QFRZDIS = 0x00000400,/* Disable DEV Q freezing */ 82 CAM_DEV_QFREEZE = 0x00000800,/* Freeze DEV Q on execution */ 83 CAM_HIGH_POWER = 0x00001000,/* Command takes a lot of power */ 84 CAM_SENSE_PTR = 0x00002000,/* Sense data is a pointer */ 85 CAM_SENSE_PHYS = 0x00004000,/* Sense pointer is physical addr*/ 86 CAM_TAG_ACTION_VALID = 0x00008000,/* Use the tag action in this ccb*/ 87 CAM_PASS_ERR_RECOVER = 0x00010000,/* Pass driver does err. recovery*/ 88 CAM_DIS_DISCONNECT = 0x00020000,/* Disable disconnect */ 89 CAM_MSG_BUF_PHYS = 0x00080000,/* Message buffer ptr is physical*/ 90 CAM_SNS_BUF_PHYS = 0x00100000,/* Autosense data ptr is physical*/ 91 CAM_CDB_PHYS = 0x00400000,/* CDB poiner is physical */ 92 CAM_ENG_SGLIST = 0x00800000,/* SG list is for the HBA engine */ 93 94 /* Phase cognizant mode flags */ 95 CAM_DIS_AUTOSRP = 0x01000000,/* Disable autosave/restore ptrs */ 96 CAM_DIS_AUTODISC = 0x02000000,/* Disable auto disconnect */ 97 CAM_TGT_CCB_AVAIL = 0x04000000,/* Target CCB available */ 98 CAM_TGT_PHASE_MODE = 0x08000000,/* The SIM runs in phase mode */ 99 CAM_MSGB_VALID = 0x10000000,/* Message buffer valid */ 100 CAM_STATUS_VALID = 0x20000000,/* Status buffer valid */ 101 CAM_DATAB_VALID = 0x40000000,/* Data buffer valid */ 102 103 /* Host target Mode flags */ 104 CAM_SEND_SENSE = 0x08000000,/* Send sense data with status */ 105 CAM_TERM_IO = 0x10000000,/* Terminate I/O Message sup. */ 106 CAM_DISCONNECT = 0x20000000,/* Disconnects are mandatory */ 107 CAM_SEND_STATUS = 0x40000000,/* Send status after data phase */ 108 109 CAM_UNLOCKED = 0x80000000 /* Call callback without lock. */ 110 } ccb_flags; 111 112 typedef enum { 113 CAM_EXTLUN_VALID = 0x00000001,/* 64bit lun field is valid */ 114 } ccb_xflags; 115 116 /* XPT Opcodes for xpt_action */ 117 typedef enum { 118 /* Function code flags are bits greater than 0xff */ 119 XPT_FC_QUEUED = 0x100, 120 /* Non-immediate function code */ 121 XPT_FC_USER_CCB = 0x200, 122 XPT_FC_XPT_ONLY = 0x400, 123 /* Only for the transport layer device */ 124 XPT_FC_DEV_QUEUED = 0x800 | XPT_FC_QUEUED, 125 /* Passes through the device queues */ 126 /* Common function commands: 0x00->0x0F */ 127 XPT_NOOP = 0x00, 128 /* Execute Nothing */ 129 XPT_SCSI_IO = 0x01 | XPT_FC_DEV_QUEUED, 130 /* Execute the requested I/O operation */ 131 XPT_GDEV_TYPE = 0x02, 132 /* Get type information for specified device */ 133 XPT_GDEVLIST = 0x03, 134 /* Get a list of peripheral devices */ 135 XPT_PATH_INQ = 0x04, 136 /* Path routing inquiry */ 137 XPT_REL_SIMQ = 0x05, 138 /* Release a frozen device queue */ 139 XPT_SASYNC_CB = 0x06, 140 /* Set Asynchronous Callback Parameters */ 141 XPT_SDEV_TYPE = 0x07, 142 /* Set device type information */ 143 XPT_SCAN_BUS = 0x08 | XPT_FC_QUEUED | XPT_FC_USER_CCB 144 | XPT_FC_XPT_ONLY, 145 /* (Re)Scan the SCSI Bus */ 146 XPT_DEV_MATCH = 0x09 | XPT_FC_XPT_ONLY, 147 /* Get EDT entries matching the given pattern */ 148 XPT_DEBUG = 0x0a, 149 /* Turn on debugging for a bus, target or lun */ 150 XPT_PATH_STATS = 0x0b, 151 /* Path statistics (error counts, etc.) */ 152 XPT_GDEV_STATS = 0x0c, 153 /* Device statistics (error counts, etc.) */ 154 XPT_DEV_ADVINFO = 0x0e, 155 /* Get/Set Device advanced information */ 156 XPT_ASYNC = 0x0f | XPT_FC_QUEUED | XPT_FC_USER_CCB 157 | XPT_FC_XPT_ONLY, 158 /* Asynchronous event */ 159 /* SCSI Control Functions: 0x10->0x1F */ 160 XPT_ABORT = 0x10, 161 /* Abort the specified CCB */ 162 XPT_RESET_BUS = 0x11 | XPT_FC_XPT_ONLY, 163 /* Reset the specified SCSI bus */ 164 XPT_RESET_DEV = 0x12 | XPT_FC_DEV_QUEUED, 165 /* Bus Device Reset the specified SCSI device */ 166 XPT_TERM_IO = 0x13, 167 /* Terminate the I/O process */ 168 XPT_SCAN_LUN = 0x14 | XPT_FC_QUEUED | XPT_FC_USER_CCB 169 | XPT_FC_XPT_ONLY, 170 /* Scan Logical Unit */ 171 XPT_GET_TRAN_SETTINGS = 0x15, 172 /* 173 * Get default/user transfer settings 174 * for the target 175 */ 176 XPT_SET_TRAN_SETTINGS = 0x16, 177 /* 178 * Set transfer rate/width 179 * negotiation settings 180 */ 181 XPT_CALC_GEOMETRY = 0x17, 182 /* 183 * Calculate the geometry parameters for 184 * a device give the sector size and 185 * volume size. 186 */ 187 XPT_ATA_IO = 0x18 | XPT_FC_DEV_QUEUED, 188 /* Execute the requested ATA I/O operation */ 189 190 XPT_GET_SIM_KNOB = 0x18, 191 /* 192 * Get SIM specific knob values. 193 */ 194 195 XPT_SET_SIM_KNOB = 0x19, 196 /* 197 * Set SIM specific knob values. 198 */ 199 200 XPT_SMP_IO = 0x1b | XPT_FC_DEV_QUEUED, 201 /* Serial Management Protocol */ 202 203 XPT_SCAN_TGT = 0x1E | XPT_FC_QUEUED | XPT_FC_USER_CCB 204 | XPT_FC_XPT_ONLY, 205 /* Scan Target */ 206 207 /* HBA engine commands 0x20->0x2F */ 208 XPT_ENG_INQ = 0x20 | XPT_FC_XPT_ONLY, 209 /* HBA engine feature inquiry */ 210 XPT_ENG_EXEC = 0x21 | XPT_FC_DEV_QUEUED, 211 /* HBA execute engine request */ 212 213 /* Target mode commands: 0x30->0x3F */ 214 XPT_EN_LUN = 0x30, 215 /* Enable LUN as a target */ 216 XPT_TARGET_IO = 0x31 | XPT_FC_DEV_QUEUED, 217 /* Execute target I/O request */ 218 XPT_ACCEPT_TARGET_IO = 0x32 | XPT_FC_QUEUED | XPT_FC_USER_CCB, 219 /* Accept Host Target Mode CDB */ 220 XPT_CONT_TARGET_IO = 0x33 | XPT_FC_DEV_QUEUED, 221 /* Continue Host Target I/O Connection */ 222 XPT_IMMED_NOTIFY = 0x34 | XPT_FC_QUEUED | XPT_FC_USER_CCB, 223 /* Notify Host Target driver of event (obsolete) */ 224 XPT_NOTIFY_ACK = 0x35, 225 /* Acknowledgement of event (obsolete) */ 226 XPT_IMMEDIATE_NOTIFY = 0x36 | XPT_FC_QUEUED | XPT_FC_USER_CCB, 227 /* Notify Host Target driver of event */ 228 XPT_NOTIFY_ACKNOWLEDGE = 0x37 | XPT_FC_QUEUED | XPT_FC_USER_CCB, 229 /* Acknowledgement of event */ 230 231 /* Vendor Unique codes: 0x80->0x8F */ 232 XPT_VUNIQUE = 0x80 233 } xpt_opcode; 234 235 #define XPT_FC_GROUP_MASK 0xF0 236 #define XPT_FC_GROUP(op) ((op) & XPT_FC_GROUP_MASK) 237 #define XPT_FC_GROUP_COMMON 0x00 238 #define XPT_FC_GROUP_SCSI_CONTROL 0x10 239 #define XPT_FC_GROUP_HBA_ENGINE 0x20 240 #define XPT_FC_GROUP_TMODE 0x30 241 #define XPT_FC_GROUP_VENDOR_UNIQUE 0x80 242 243 #define XPT_FC_IS_DEV_QUEUED(ccb) \ 244 (((ccb)->ccb_h.func_code & XPT_FC_DEV_QUEUED) == XPT_FC_DEV_QUEUED) 245 #define XPT_FC_IS_QUEUED(ccb) \ 246 (((ccb)->ccb_h.func_code & XPT_FC_QUEUED) != 0) 247 248 typedef enum { 249 PROTO_UNKNOWN, 250 PROTO_UNSPECIFIED, 251 PROTO_SCSI, /* Small Computer System Interface */ 252 PROTO_ATA, /* AT Attachment */ 253 PROTO_ATAPI, /* AT Attachment Packetized Interface */ 254 PROTO_SATAPM, /* SATA Port Multiplier */ 255 PROTO_SEMB, /* SATA Enclosure Management Bridge */ 256 } cam_proto; 257 258 typedef enum { 259 XPORT_UNKNOWN, 260 XPORT_UNSPECIFIED, 261 XPORT_SPI, /* SCSI Parallel Interface */ 262 XPORT_FC, /* Fiber Channel */ 263 XPORT_SSA, /* Serial Storage Architecture */ 264 XPORT_USB, /* Universal Serial Bus */ 265 XPORT_PPB, /* Parallel Port Bus */ 266 XPORT_ATA, /* AT Attachment */ 267 XPORT_SAS, /* Serial Attached SCSI */ 268 XPORT_SATA, /* Serial AT Attachment */ 269 XPORT_ISCSI, /* iSCSI */ 270 XPORT_SRP, /* SCSI RDMA Protocol */ 271 } cam_xport; 272 273 #define XPORT_IS_ATA(t) ((t) == XPORT_ATA || (t) == XPORT_SATA) 274 #define XPORT_IS_SCSI(t) ((t) != XPORT_UNKNOWN && \ 275 (t) != XPORT_UNSPECIFIED && \ 276 !XPORT_IS_ATA(t)) 277 #define XPORT_DEVSTAT_TYPE(t) (XPORT_IS_ATA(t) ? DEVSTAT_TYPE_IF_IDE : \ 278 XPORT_IS_SCSI(t) ? DEVSTAT_TYPE_IF_SCSI : \ 279 DEVSTAT_TYPE_IF_OTHER) 280 281 #define PROTO_VERSION_UNKNOWN (UINT_MAX - 1) 282 #define PROTO_VERSION_UNSPECIFIED UINT_MAX 283 #define XPORT_VERSION_UNKNOWN (UINT_MAX - 1) 284 #define XPORT_VERSION_UNSPECIFIED UINT_MAX 285 286 typedef union { 287 LIST_ENTRY(ccb_hdr) le; 288 SLIST_ENTRY(ccb_hdr) sle; 289 TAILQ_ENTRY(ccb_hdr) tqe; 290 STAILQ_ENTRY(ccb_hdr) stqe; 291 } camq_entry; 292 293 typedef union { 294 void *ptr; 295 u_long field; 296 u_int8_t bytes[sizeof(uintptr_t)]; 297 } ccb_priv_entry; 298 299 typedef union { 300 ccb_priv_entry entries[CCB_PERIPH_PRIV_SIZE]; 301 u_int8_t bytes[CCB_PERIPH_PRIV_SIZE * sizeof(ccb_priv_entry)]; 302 } ccb_ppriv_area; 303 304 typedef union { 305 ccb_priv_entry entries[CCB_SIM_PRIV_SIZE]; 306 u_int8_t bytes[CCB_SIM_PRIV_SIZE * sizeof(ccb_priv_entry)]; 307 } ccb_spriv_area; 308 309 typedef struct { 310 struct timeval *etime; 311 uintptr_t sim_data; 312 uintptr_t periph_data; 313 } ccb_qos_area; 314 315 struct ccb_hdr { 316 cam_pinfo pinfo; /* Info for priority scheduling */ 317 camq_entry xpt_links; /* For chaining in the XPT layer */ 318 camq_entry sim_links; /* For chaining in the SIM layer */ 319 camq_entry periph_links; /* For chaining in the type driver */ 320 u_int32_t retry_count; 321 void (*cbfcnp)(struct cam_periph *, union ccb *); 322 /* Callback on completion function */ 323 xpt_opcode func_code; /* XPT function code */ 324 u_int32_t status; /* Status returned by CAM subsystem */ 325 struct cam_path *path; /* Compiled path for this ccb */ 326 path_id_t path_id; /* Path ID for the request */ 327 target_id_t target_id; /* Target device ID */ 328 lun_id_t target_lun; /* Target LUN number */ 329 lun64_id_t ext_lun; /* 64bit extended/multi-level LUNs */ 330 u_int32_t flags; /* ccb_flags */ 331 u_int32_t xflags; /* Extended flags */ 332 ccb_ppriv_area periph_priv; 333 ccb_spriv_area sim_priv; 334 ccb_qos_area qos; 335 u_int32_t timeout; /* Hard timeout value in mseconds */ 336 struct timeval softtimeout; /* Soft timeout value in sec + usec */ 337 }; 338 339 /* Get Device Information CCB */ 340 struct ccb_getdev { 341 struct ccb_hdr ccb_h; 342 cam_proto protocol; 343 struct scsi_inquiry_data inq_data; 344 struct ata_params ident_data; 345 u_int8_t serial_num[252]; 346 u_int8_t inq_flags; 347 u_int8_t serial_num_len; 348 }; 349 350 /* Device Statistics CCB */ 351 struct ccb_getdevstats { 352 struct ccb_hdr ccb_h; 353 int dev_openings; /* Space left for more work on device*/ 354 int dev_active; /* Transactions running on the device */ 355 int devq_openings; /* Space left for more queued work */ 356 int devq_queued; /* Transactions queued to be sent */ 357 int held; /* 358 * CCBs held by peripheral drivers 359 * for this device 360 */ 361 int maxtags; /* 362 * Boundary conditions for number of 363 * tagged operations 364 */ 365 int mintags; 366 struct timeval last_reset; /* Time of last bus reset/loop init */ 367 }; 368 369 typedef enum { 370 CAM_GDEVLIST_LAST_DEVICE, 371 CAM_GDEVLIST_LIST_CHANGED, 372 CAM_GDEVLIST_MORE_DEVS, 373 CAM_GDEVLIST_ERROR 374 } ccb_getdevlist_status_e; 375 376 struct ccb_getdevlist { 377 struct ccb_hdr ccb_h; 378 char periph_name[DEV_IDLEN]; 379 u_int32_t unit_number; 380 unsigned int generation; 381 u_int32_t index; 382 ccb_getdevlist_status_e status; 383 }; 384 385 typedef enum { 386 PERIPH_MATCH_NONE = 0x000, 387 PERIPH_MATCH_PATH = 0x001, 388 PERIPH_MATCH_TARGET = 0x002, 389 PERIPH_MATCH_LUN = 0x004, 390 PERIPH_MATCH_NAME = 0x008, 391 PERIPH_MATCH_UNIT = 0x010, 392 PERIPH_MATCH_ANY = 0x01f 393 } periph_pattern_flags; 394 395 struct periph_match_pattern { 396 char periph_name[DEV_IDLEN]; 397 u_int32_t unit_number; 398 path_id_t path_id; 399 target_id_t target_id; 400 lun_id_t target_lun; 401 periph_pattern_flags flags; 402 }; 403 404 typedef enum { 405 DEV_MATCH_NONE = 0x000, 406 DEV_MATCH_PATH = 0x001, 407 DEV_MATCH_TARGET = 0x002, 408 DEV_MATCH_LUN = 0x004, 409 DEV_MATCH_INQUIRY = 0x008, 410 DEV_MATCH_DEVID = 0x010, 411 DEV_MATCH_ANY = 0x00f 412 } dev_pattern_flags; 413 414 struct device_id_match_pattern { 415 uint8_t id_len; 416 uint8_t id[256]; 417 }; 418 419 struct device_match_pattern { 420 path_id_t path_id; 421 target_id_t target_id; 422 lun_id_t target_lun; 423 dev_pattern_flags flags; 424 union { 425 struct scsi_static_inquiry_pattern inq_pat; 426 struct device_id_match_pattern devid_pat; 427 } data; 428 }; 429 430 typedef enum { 431 BUS_MATCH_NONE = 0x000, 432 BUS_MATCH_PATH = 0x001, 433 BUS_MATCH_NAME = 0x002, 434 BUS_MATCH_UNIT = 0x004, 435 BUS_MATCH_BUS_ID = 0x008, 436 BUS_MATCH_ANY = 0x00f 437 } bus_pattern_flags; 438 439 struct bus_match_pattern { 440 path_id_t path_id; 441 char dev_name[DEV_IDLEN]; 442 u_int32_t unit_number; 443 u_int32_t bus_id; 444 bus_pattern_flags flags; 445 }; 446 447 union match_pattern { 448 struct periph_match_pattern periph_pattern; 449 struct device_match_pattern device_pattern; 450 struct bus_match_pattern bus_pattern; 451 }; 452 453 typedef enum { 454 DEV_MATCH_PERIPH, 455 DEV_MATCH_DEVICE, 456 DEV_MATCH_BUS 457 } dev_match_type; 458 459 struct dev_match_pattern { 460 dev_match_type type; 461 union match_pattern pattern; 462 }; 463 464 struct periph_match_result { 465 char periph_name[DEV_IDLEN]; 466 u_int32_t unit_number; 467 path_id_t path_id; 468 target_id_t target_id; 469 lun_id_t target_lun; 470 }; 471 472 typedef enum { 473 DEV_RESULT_NOFLAG = 0x00, 474 DEV_RESULT_UNCONFIGURED = 0x01 475 } dev_result_flags; 476 477 struct device_match_result { 478 path_id_t path_id; 479 target_id_t target_id; 480 lun_id_t target_lun; 481 cam_proto protocol; 482 struct scsi_inquiry_data inq_data; 483 struct ata_params ident_data; 484 dev_result_flags flags; 485 }; 486 487 struct bus_match_result { 488 path_id_t path_id; 489 char dev_name[DEV_IDLEN]; 490 u_int32_t unit_number; 491 u_int32_t bus_id; 492 }; 493 494 union match_result { 495 struct periph_match_result periph_result; 496 struct device_match_result device_result; 497 struct bus_match_result bus_result; 498 }; 499 500 struct dev_match_result { 501 dev_match_type type; 502 union match_result result; 503 }; 504 505 typedef enum { 506 CAM_DEV_MATCH_LAST, 507 CAM_DEV_MATCH_MORE, 508 CAM_DEV_MATCH_LIST_CHANGED, 509 CAM_DEV_MATCH_SIZE_ERROR, 510 CAM_DEV_MATCH_ERROR 511 } ccb_dev_match_status; 512 513 typedef enum { 514 CAM_DEV_POS_NONE = 0x000, 515 CAM_DEV_POS_BUS = 0x001, 516 CAM_DEV_POS_TARGET = 0x002, 517 CAM_DEV_POS_DEVICE = 0x004, 518 CAM_DEV_POS_PERIPH = 0x008, 519 CAM_DEV_POS_PDPTR = 0x010, 520 CAM_DEV_POS_TYPEMASK = 0xf00, 521 CAM_DEV_POS_EDT = 0x100, 522 CAM_DEV_POS_PDRV = 0x200 523 } dev_pos_type; 524 525 struct ccb_dm_cookie { 526 void *bus; 527 void *target; 528 void *device; 529 void *periph; 530 void *pdrv; 531 }; 532 533 struct ccb_dev_position { 534 u_int generations[4]; 535 #define CAM_BUS_GENERATION 0x00 536 #define CAM_TARGET_GENERATION 0x01 537 #define CAM_DEV_GENERATION 0x02 538 #define CAM_PERIPH_GENERATION 0x03 539 dev_pos_type position_type; 540 struct ccb_dm_cookie cookie; 541 }; 542 543 struct ccb_dev_match { 544 struct ccb_hdr ccb_h; 545 ccb_dev_match_status status; 546 u_int32_t num_patterns; 547 u_int32_t pattern_buf_len; 548 struct dev_match_pattern *patterns; 549 u_int32_t num_matches; 550 u_int32_t match_buf_len; 551 struct dev_match_result *matches; 552 struct ccb_dev_position pos; 553 }; 554 555 /* 556 * Definitions for the path inquiry CCB fields. 557 */ 558 #define CAM_VERSION 0x18 /* Hex value for current version */ 559 560 typedef enum { 561 PI_MDP_ABLE = 0x80, /* Supports MDP message */ 562 PI_WIDE_32 = 0x40, /* Supports 32 bit wide SCSI */ 563 PI_WIDE_16 = 0x20, /* Supports 16 bit wide SCSI */ 564 PI_SDTR_ABLE = 0x10, /* Supports SDTR message */ 565 PI_LINKED_CDB = 0x08, /* Supports linked CDBs */ 566 PI_SATAPM = 0x04, /* Supports SATA PM */ 567 PI_TAG_ABLE = 0x02, /* Supports tag queue messages */ 568 PI_SOFT_RST = 0x01 /* Supports soft reset alternative */ 569 } pi_inqflag; 570 571 typedef enum { 572 PIT_PROCESSOR = 0x80, /* Target mode processor mode */ 573 PIT_PHASE = 0x40, /* Target mode phase cog. mode */ 574 PIT_DISCONNECT = 0x20, /* Disconnects supported in target mode */ 575 PIT_TERM_IO = 0x10, /* Terminate I/O message supported in TM */ 576 PIT_GRP_6 = 0x08, /* Group 6 commands supported */ 577 PIT_GRP_7 = 0x04 /* Group 7 commands supported */ 578 } pi_tmflag; 579 580 typedef enum { 581 PIM_EXTLUNS = 0x100,/* 64bit extended LUNs supported */ 582 PIM_SCANHILO = 0x80, /* Bus scans from high ID to low ID */ 583 PIM_NOREMOVE = 0x40, /* Removeable devices not included in scan */ 584 PIM_NOINITIATOR = 0x20, /* Initiator role not supported. */ 585 PIM_NOBUSRESET = 0x10, /* User has disabled initial BUS RESET */ 586 PIM_NO_6_BYTE = 0x08, /* Do not send 6-byte commands */ 587 PIM_SEQSCAN = 0x04, /* Do bus scans sequentially, not in parallel */ 588 PIM_UNMAPPED = 0x02, 589 PIM_NOSCAN = 0x01 /* SIM does its own scanning */ 590 } pi_miscflag; 591 592 /* Path Inquiry CCB */ 593 struct ccb_pathinq_settings_spi { 594 u_int8_t ppr_options; 595 }; 596 597 struct ccb_pathinq_settings_fc { 598 u_int64_t wwnn; /* world wide node name */ 599 u_int64_t wwpn; /* world wide port name */ 600 u_int32_t port; /* 24 bit port id, if known */ 601 u_int32_t bitrate; /* Mbps */ 602 }; 603 604 struct ccb_pathinq_settings_sas { 605 u_int32_t bitrate; /* Mbps */ 606 }; 607 #define PATHINQ_SETTINGS_SIZE 128 608 609 struct ccb_pathinq { 610 struct ccb_hdr ccb_h; 611 u_int8_t version_num; /* Version number for the SIM/HBA */ 612 u_int8_t hba_inquiry; /* Mimic of INQ byte 7 for the HBA */ 613 u_int16_t target_sprt; /* Flags for target mode support */ 614 u_int32_t hba_misc; /* Misc HBA features */ 615 u_int16_t hba_eng_cnt; /* HBA engine count */ 616 /* Vendor Unique capabilities */ 617 u_int8_t vuhba_flags[VUHBALEN]; 618 u_int32_t max_target; /* Maximum supported Target */ 619 u_int32_t max_lun; /* Maximum supported Lun */ 620 u_int32_t async_flags; /* Installed Async handlers */ 621 path_id_t hpath_id; /* Highest Path ID in the subsystem */ 622 target_id_t initiator_id; /* ID of the HBA on the SCSI bus */ 623 char sim_vid[SIM_IDLEN]; /* Vendor ID of the SIM */ 624 char hba_vid[HBA_IDLEN]; /* Vendor ID of the HBA */ 625 char dev_name[DEV_IDLEN];/* Device name for SIM */ 626 u_int32_t unit_number; /* Unit number for SIM */ 627 u_int32_t bus_id; /* Bus ID for SIM */ 628 u_int32_t base_transfer_speed;/* Base bus speed in KB/sec */ 629 cam_proto protocol; 630 u_int protocol_version; 631 cam_xport transport; 632 u_int transport_version; 633 union { 634 struct ccb_pathinq_settings_spi spi; 635 struct ccb_pathinq_settings_fc fc; 636 struct ccb_pathinq_settings_sas sas; 637 char ccb_pathinq_settings_opaque[PATHINQ_SETTINGS_SIZE]; 638 } xport_specific; 639 u_int maxio; /* Max supported I/O size, in bytes. */ 640 u_int16_t hba_vendor; /* HBA vendor ID */ 641 u_int16_t hba_device; /* HBA device ID */ 642 u_int16_t hba_subvendor; /* HBA subvendor ID */ 643 u_int16_t hba_subdevice; /* HBA subdevice ID */ 644 }; 645 646 /* Path Statistics CCB */ 647 struct ccb_pathstats { 648 struct ccb_hdr ccb_h; 649 struct timeval last_reset; /* Time of last bus reset/loop init */ 650 }; 651 652 typedef enum { 653 SMP_FLAG_NONE = 0x00, 654 SMP_FLAG_REQ_SG = 0x01, 655 SMP_FLAG_RSP_SG = 0x02 656 } ccb_smp_pass_flags; 657 658 /* 659 * Serial Management Protocol CCB 660 * XXX Currently the semantics for this CCB are that it is executed either 661 * by the addressed device, or that device's parent (i.e. an expander for 662 * any device on an expander) if the addressed device doesn't support SMP. 663 * Later, once we have the ability to probe SMP-only devices and put them 664 * in CAM's topology, the CCB will only be executed by the addressed device 665 * if possible. 666 */ 667 struct ccb_smpio { 668 struct ccb_hdr ccb_h; 669 uint8_t *smp_request; 670 int smp_request_len; 671 uint16_t smp_request_sglist_cnt; 672 uint8_t *smp_response; 673 int smp_response_len; 674 uint16_t smp_response_sglist_cnt; 675 ccb_smp_pass_flags flags; 676 }; 677 678 typedef union { 679 u_int8_t *sense_ptr; /* 680 * Pointer to storage 681 * for sense information 682 */ 683 /* Storage Area for sense information */ 684 struct scsi_sense_data sense_buf; 685 } sense_t; 686 687 typedef union { 688 u_int8_t *cdb_ptr; /* Pointer to the CDB bytes to send */ 689 /* Area for the CDB send */ 690 u_int8_t cdb_bytes[IOCDBLEN]; 691 } cdb_t; 692 693 /* 694 * SCSI I/O Request CCB used for the XPT_SCSI_IO and XPT_CONT_TARGET_IO 695 * function codes. 696 */ 697 struct ccb_scsiio { 698 struct ccb_hdr ccb_h; 699 union ccb *next_ccb; /* Ptr for next CCB for action */ 700 u_int8_t *req_map; /* Ptr to mapping info */ 701 u_int8_t *data_ptr; /* Ptr to the data buf/SG list */ 702 u_int32_t dxfer_len; /* Data transfer length */ 703 /* Autosense storage */ 704 struct scsi_sense_data sense_data; 705 u_int8_t sense_len; /* Number of bytes to autosense */ 706 u_int8_t cdb_len; /* Number of bytes for the CDB */ 707 u_int16_t sglist_cnt; /* Number of SG list entries */ 708 u_int8_t scsi_status; /* Returned SCSI status */ 709 u_int8_t sense_resid; /* Autosense resid length: 2's comp */ 710 u_int32_t resid; /* Transfer residual length: 2's comp */ 711 cdb_t cdb_io; /* Union for CDB bytes/pointer */ 712 u_int8_t *msg_ptr; /* Pointer to the message buffer */ 713 u_int16_t msg_len; /* Number of bytes for the Message */ 714 u_int8_t tag_action; /* What to do for tag queueing */ 715 /* 716 * The tag action should be either the define below (to send a 717 * non-tagged transaction) or one of the defined scsi tag messages 718 * from scsi_message.h. 719 */ 720 #define CAM_TAG_ACTION_NONE 0x00 721 u_int tag_id; /* tag id from initator (target mode) */ 722 u_int init_id; /* initiator id of who selected */ 723 }; 724 725 /* 726 * ATA I/O Request CCB used for the XPT_ATA_IO function code. 727 */ 728 struct ccb_ataio { 729 struct ccb_hdr ccb_h; 730 union ccb *next_ccb; /* Ptr for next CCB for action */ 731 struct ata_cmd cmd; /* ATA command register set */ 732 struct ata_res res; /* ATA result register set */ 733 u_int8_t *data_ptr; /* Ptr to the data buf/SG list */ 734 u_int32_t dxfer_len; /* Data transfer length */ 735 u_int32_t resid; /* Transfer residual length: 2's comp */ 736 u_int8_t tag_action; /* What to do for tag queueing */ 737 /* 738 * The tag action should be either the define below (to send a 739 * non-tagged transaction) or one of the defined scsi tag messages 740 * from scsi_message.h. 741 */ 742 #define CAM_TAG_ACTION_NONE 0x00 743 u_int tag_id; /* tag id from initator (target mode) */ 744 u_int init_id; /* initiator id of who selected */ 745 }; 746 747 struct ccb_accept_tio { 748 struct ccb_hdr ccb_h; 749 cdb_t cdb_io; /* Union for CDB bytes/pointer */ 750 u_int8_t cdb_len; /* Number of bytes for the CDB */ 751 u_int8_t tag_action; /* What to do for tag queueing */ 752 u_int8_t sense_len; /* Number of bytes of Sense Data */ 753 u_int tag_id; /* tag id from initator (target mode) */ 754 u_int init_id; /* initiator id of who selected */ 755 struct scsi_sense_data sense_data; 756 }; 757 758 /* Release SIM Queue */ 759 struct ccb_relsim { 760 struct ccb_hdr ccb_h; 761 u_int32_t release_flags; 762 #define RELSIM_ADJUST_OPENINGS 0x01 763 #define RELSIM_RELEASE_AFTER_TIMEOUT 0x02 764 #define RELSIM_RELEASE_AFTER_CMDCMPLT 0x04 765 #define RELSIM_RELEASE_AFTER_QEMPTY 0x08 766 u_int32_t openings; 767 u_int32_t release_timeout; /* Abstract argument. */ 768 u_int32_t qfrozen_cnt; 769 }; 770 771 /* 772 * Definitions for the asynchronous callback CCB fields. 773 */ 774 typedef enum { 775 AC_UNIT_ATTENTION = 0x4000,/* Device reported UNIT ATTENTION */ 776 AC_ADVINFO_CHANGED = 0x2000,/* Advance info might have changes */ 777 AC_CONTRACT = 0x1000,/* A contractual callback */ 778 AC_GETDEV_CHANGED = 0x800,/* Getdev info might have changed */ 779 AC_INQ_CHANGED = 0x400,/* Inquiry info might have changed */ 780 AC_TRANSFER_NEG = 0x200,/* New transfer settings in effect */ 781 AC_LOST_DEVICE = 0x100,/* A device went away */ 782 AC_FOUND_DEVICE = 0x080,/* A new device was found */ 783 AC_PATH_DEREGISTERED = 0x040,/* A path has de-registered */ 784 AC_PATH_REGISTERED = 0x020,/* A new path has been registered */ 785 AC_SENT_BDR = 0x010,/* A BDR message was sent to target */ 786 AC_SCSI_AEN = 0x008,/* A SCSI AEN has been received */ 787 AC_UNSOL_RESEL = 0x002,/* Unsolicited reselection occurred */ 788 AC_BUS_RESET = 0x001 /* A SCSI bus reset occurred */ 789 } ac_code; 790 791 typedef void ac_callback_t (void *softc, u_int32_t code, 792 struct cam_path *path, void *args); 793 794 /* 795 * Generic Asynchronous callbacks. 796 * 797 * Generic arguments passed bac which are then interpreted between a per-system 798 * contract number. 799 */ 800 #define AC_CONTRACT_DATA_MAX (128 - sizeof (u_int64_t)) 801 struct ac_contract { 802 u_int64_t contract_number; 803 u_int8_t contract_data[AC_CONTRACT_DATA_MAX]; 804 }; 805 806 #define AC_CONTRACT_DEV_CHG 1 807 struct ac_device_changed { 808 u_int64_t wwpn; 809 u_int32_t port; 810 target_id_t target; 811 u_int8_t arrived; 812 }; 813 814 /* Set Asynchronous Callback CCB */ 815 struct ccb_setasync { 816 struct ccb_hdr ccb_h; 817 u_int32_t event_enable; /* Async Event enables */ 818 ac_callback_t *callback; 819 void *callback_arg; 820 }; 821 822 /* Set Device Type CCB */ 823 struct ccb_setdev { 824 struct ccb_hdr ccb_h; 825 u_int8_t dev_type; /* Value for dev type field in EDT */ 826 }; 827 828 /* SCSI Control Functions */ 829 830 /* Abort XPT request CCB */ 831 struct ccb_abort { 832 struct ccb_hdr ccb_h; 833 union ccb *abort_ccb; /* Pointer to CCB to abort */ 834 }; 835 836 /* Reset SCSI Bus CCB */ 837 struct ccb_resetbus { 838 struct ccb_hdr ccb_h; 839 }; 840 841 /* Reset SCSI Device CCB */ 842 struct ccb_resetdev { 843 struct ccb_hdr ccb_h; 844 }; 845 846 /* Terminate I/O Process Request CCB */ 847 struct ccb_termio { 848 struct ccb_hdr ccb_h; 849 union ccb *termio_ccb; /* Pointer to CCB to terminate */ 850 }; 851 852 typedef enum { 853 CTS_TYPE_CURRENT_SETTINGS, 854 CTS_TYPE_USER_SETTINGS 855 } cts_type; 856 857 struct ccb_trans_settings_scsi 858 { 859 u_int valid; /* Which fields to honor */ 860 #define CTS_SCSI_VALID_TQ 0x01 861 u_int flags; 862 #define CTS_SCSI_FLAGS_TAG_ENB 0x01 863 }; 864 865 struct ccb_trans_settings_ata 866 { 867 u_int valid; /* Which fields to honor */ 868 #define CTS_ATA_VALID_TQ 0x01 869 u_int flags; 870 #define CTS_ATA_FLAGS_TAG_ENB 0x01 871 }; 872 873 struct ccb_trans_settings_spi 874 { 875 u_int valid; /* Which fields to honor */ 876 #define CTS_SPI_VALID_SYNC_RATE 0x01 877 #define CTS_SPI_VALID_SYNC_OFFSET 0x02 878 #define CTS_SPI_VALID_BUS_WIDTH 0x04 879 #define CTS_SPI_VALID_DISC 0x08 880 #define CTS_SPI_VALID_PPR_OPTIONS 0x10 881 u_int flags; 882 #define CTS_SPI_FLAGS_DISC_ENB 0x01 883 u_int sync_period; 884 u_int sync_offset; 885 u_int bus_width; 886 u_int ppr_options; 887 }; 888 889 struct ccb_trans_settings_fc { 890 u_int valid; /* Which fields to honor */ 891 #define CTS_FC_VALID_WWNN 0x8000 892 #define CTS_FC_VALID_WWPN 0x4000 893 #define CTS_FC_VALID_PORT 0x2000 894 #define CTS_FC_VALID_SPEED 0x1000 895 u_int64_t wwnn; /* world wide node name */ 896 u_int64_t wwpn; /* world wide port name */ 897 u_int32_t port; /* 24 bit port id, if known */ 898 u_int32_t bitrate; /* Mbps */ 899 }; 900 901 struct ccb_trans_settings_sas { 902 u_int valid; /* Which fields to honor */ 903 #define CTS_SAS_VALID_SPEED 0x1000 904 u_int32_t bitrate; /* Mbps */ 905 }; 906 907 struct ccb_trans_settings_pata { 908 u_int valid; /* Which fields to honor */ 909 #define CTS_ATA_VALID_MODE 0x01 910 #define CTS_ATA_VALID_BYTECOUNT 0x02 911 #define CTS_ATA_VALID_ATAPI 0x20 912 #define CTS_ATA_VALID_CAPS 0x40 913 int mode; /* Mode */ 914 u_int bytecount; /* Length of PIO transaction */ 915 u_int atapi; /* Length of ATAPI CDB */ 916 u_int caps; /* Device and host SATA caps. */ 917 #define CTS_ATA_CAPS_H 0x0000ffff 918 #define CTS_ATA_CAPS_H_DMA48 0x00000001 /* 48-bit DMA */ 919 #define CTS_ATA_CAPS_D 0xffff0000 920 }; 921 922 struct ccb_trans_settings_sata { 923 u_int valid; /* Which fields to honor */ 924 #define CTS_SATA_VALID_MODE 0x01 925 #define CTS_SATA_VALID_BYTECOUNT 0x02 926 #define CTS_SATA_VALID_REVISION 0x04 927 #define CTS_SATA_VALID_PM 0x08 928 #define CTS_SATA_VALID_TAGS 0x10 929 #define CTS_SATA_VALID_ATAPI 0x20 930 #define CTS_SATA_VALID_CAPS 0x40 931 int mode; /* Legacy PATA mode */ 932 u_int bytecount; /* Length of PIO transaction */ 933 int revision; /* SATA revision */ 934 u_int pm_present; /* PM is present (XPT->SIM) */ 935 u_int tags; /* Number of allowed tags */ 936 u_int atapi; /* Length of ATAPI CDB */ 937 u_int caps; /* Device and host SATA caps. */ 938 #define CTS_SATA_CAPS_H 0x0000ffff 939 #define CTS_SATA_CAPS_H_PMREQ 0x00000001 940 #define CTS_SATA_CAPS_H_APST 0x00000002 941 #define CTS_SATA_CAPS_H_DMAAA 0x00000010 /* Auto-activation */ 942 #define CTS_SATA_CAPS_H_AN 0x00000020 /* Async. notification */ 943 #define CTS_SATA_CAPS_D 0xffff0000 944 #define CTS_SATA_CAPS_D_PMREQ 0x00010000 945 #define CTS_SATA_CAPS_D_APST 0x00020000 946 }; 947 948 /* Get/Set transfer rate/width/disconnection/tag queueing settings */ 949 struct ccb_trans_settings { 950 struct ccb_hdr ccb_h; 951 cts_type type; /* Current or User settings */ 952 cam_proto protocol; 953 u_int protocol_version; 954 cam_xport transport; 955 u_int transport_version; 956 union { 957 u_int valid; /* Which fields to honor */ 958 struct ccb_trans_settings_ata ata; 959 struct ccb_trans_settings_scsi scsi; 960 } proto_specific; 961 union { 962 u_int valid; /* Which fields to honor */ 963 struct ccb_trans_settings_spi spi; 964 struct ccb_trans_settings_fc fc; 965 struct ccb_trans_settings_sas sas; 966 struct ccb_trans_settings_pata ata; 967 struct ccb_trans_settings_sata sata; 968 } xport_specific; 969 }; 970 971 972 /* 973 * Calculate the geometry parameters for a device 974 * give the block size and volume size in blocks. 975 */ 976 struct ccb_calc_geometry { 977 struct ccb_hdr ccb_h; 978 u_int32_t block_size; 979 u_int64_t volume_size; 980 u_int32_t cylinders; 981 u_int8_t heads; 982 u_int8_t secs_per_track; 983 }; 984 985 /* 986 * Set or get SIM (and transport) specific knobs 987 */ 988 989 #define KNOB_VALID_ADDRESS 0x1 990 #define KNOB_VALID_ROLE 0x2 991 992 993 #define KNOB_ROLE_NONE 0x0 994 #define KNOB_ROLE_INITIATOR 0x1 995 #define KNOB_ROLE_TARGET 0x2 996 #define KNOB_ROLE_BOTH 0x3 997 998 struct ccb_sim_knob_settings_spi { 999 u_int valid; 1000 u_int initiator_id; 1001 u_int role; 1002 }; 1003 1004 struct ccb_sim_knob_settings_fc { 1005 u_int valid; 1006 u_int64_t wwnn; /* world wide node name */ 1007 u_int64_t wwpn; /* world wide port name */ 1008 u_int role; 1009 }; 1010 1011 struct ccb_sim_knob_settings_sas { 1012 u_int valid; 1013 u_int64_t wwnn; /* world wide node name */ 1014 u_int role; 1015 }; 1016 #define KNOB_SETTINGS_SIZE 128 1017 1018 struct ccb_sim_knob { 1019 struct ccb_hdr ccb_h; 1020 union { 1021 u_int valid; /* Which fields to honor */ 1022 struct ccb_sim_knob_settings_spi spi; 1023 struct ccb_sim_knob_settings_fc fc; 1024 struct ccb_sim_knob_settings_sas sas; 1025 char pad[KNOB_SETTINGS_SIZE]; 1026 } xport_specific; 1027 }; 1028 1029 /* 1030 * Rescan the given bus, or bus/target/lun 1031 */ 1032 struct ccb_rescan { 1033 struct ccb_hdr ccb_h; 1034 cam_flags flags; 1035 }; 1036 1037 /* 1038 * Turn on debugging for the given bus, bus/target, or bus/target/lun. 1039 */ 1040 struct ccb_debug { 1041 struct ccb_hdr ccb_h; 1042 cam_debug_flags flags; 1043 }; 1044 1045 /* Target mode structures. */ 1046 1047 struct ccb_en_lun { 1048 struct ccb_hdr ccb_h; 1049 u_int16_t grp6_len; /* Group 6 VU CDB length */ 1050 u_int16_t grp7_len; /* Group 7 VU CDB length */ 1051 u_int8_t enable; 1052 }; 1053 1054 /* old, barely used immediate notify, binary compatibility */ 1055 struct ccb_immed_notify { 1056 struct ccb_hdr ccb_h; 1057 struct scsi_sense_data sense_data; 1058 u_int8_t sense_len; /* Number of bytes in sense buffer */ 1059 u_int8_t initiator_id; /* Id of initiator that selected */ 1060 u_int8_t message_args[7]; /* Message Arguments */ 1061 }; 1062 1063 struct ccb_notify_ack { 1064 struct ccb_hdr ccb_h; 1065 u_int16_t seq_id; /* Sequence identifier */ 1066 u_int8_t event; /* Event flags */ 1067 }; 1068 1069 struct ccb_immediate_notify { 1070 struct ccb_hdr ccb_h; 1071 u_int tag_id; /* Tag for immediate notify */ 1072 u_int seq_id; /* Tag for target of notify */ 1073 u_int initiator_id; /* Initiator Identifier */ 1074 u_int arg; /* Function specific */ 1075 }; 1076 1077 struct ccb_notify_acknowledge { 1078 struct ccb_hdr ccb_h; 1079 u_int tag_id; /* Tag for immediate notify */ 1080 u_int seq_id; /* Tar for target of notify */ 1081 u_int initiator_id; /* Initiator Identifier */ 1082 u_int arg; /* Function specific */ 1083 }; 1084 1085 /* HBA engine structures. */ 1086 1087 typedef enum { 1088 EIT_BUFFER, /* Engine type: buffer memory */ 1089 EIT_LOSSLESS, /* Engine type: lossless compression */ 1090 EIT_LOSSY, /* Engine type: lossy compression */ 1091 EIT_ENCRYPT /* Engine type: encryption */ 1092 } ei_type; 1093 1094 typedef enum { 1095 EAD_VUNIQUE, /* Engine algorithm ID: vendor unique */ 1096 EAD_LZ1V1, /* Engine algorithm ID: LZ1 var.1 */ 1097 EAD_LZ2V1, /* Engine algorithm ID: LZ2 var.1 */ 1098 EAD_LZ2V2 /* Engine algorithm ID: LZ2 var.2 */ 1099 } ei_algo; 1100 1101 struct ccb_eng_inq { 1102 struct ccb_hdr ccb_h; 1103 u_int16_t eng_num; /* The engine number for this inquiry */ 1104 ei_type eng_type; /* Returned engine type */ 1105 ei_algo eng_algo; /* Returned engine algorithm type */ 1106 u_int32_t eng_memeory; /* Returned engine memory size */ 1107 }; 1108 1109 struct ccb_eng_exec { /* This structure must match SCSIIO size */ 1110 struct ccb_hdr ccb_h; 1111 u_int8_t *pdrv_ptr; /* Ptr used by the peripheral driver */ 1112 u_int8_t *req_map; /* Ptr for mapping info on the req. */ 1113 u_int8_t *data_ptr; /* Pointer to the data buf/SG list */ 1114 u_int32_t dxfer_len; /* Data transfer length */ 1115 u_int8_t *engdata_ptr; /* Pointer to the engine buffer data */ 1116 u_int16_t sglist_cnt; /* Num of scatter gather list entries */ 1117 u_int32_t dmax_len; /* Destination data maximum length */ 1118 u_int32_t dest_len; /* Destination data length */ 1119 int32_t src_resid; /* Source residual length: 2's comp */ 1120 u_int32_t timeout; /* Timeout value */ 1121 u_int16_t eng_num; /* Engine number for this request */ 1122 u_int16_t vu_flags; /* Vendor Unique flags */ 1123 }; 1124 1125 /* 1126 * Definitions for the timeout field in the SCSI I/O CCB. 1127 */ 1128 #define CAM_TIME_DEFAULT 0x00000000 /* Use SIM default value */ 1129 #define CAM_TIME_INFINITY 0xFFFFFFFF /* Infinite timeout */ 1130 1131 #define CAM_SUCCESS 0 /* For signaling general success */ 1132 #define CAM_FAILURE 1 /* For signaling general failure */ 1133 1134 #define CAM_FALSE 0 1135 #define CAM_TRUE 1 1136 1137 #define XPT_CCB_INVALID -1 /* for signaling a bad CCB to free */ 1138 1139 /* 1140 * CCB for working with advanced device information. This operates in a fashion 1141 * similar to XPT_GDEV_TYPE. Specify the target in ccb_h, the buffer 1142 * type requested, and provide a buffer size/buffer to write to. If the 1143 * buffer is too small, provsiz will be larger than bufsiz. 1144 */ 1145 struct ccb_dev_advinfo { 1146 struct ccb_hdr ccb_h; 1147 uint32_t flags; 1148 #define CDAI_FLAG_STORE 0x1 /* If set, action becomes store */ 1149 uint32_t buftype; /* IN: Type of data being requested */ 1150 /* NB: buftype is interpreted on a per-transport basis */ 1151 #define CDAI_TYPE_SCSI_DEVID 1 1152 #define CDAI_TYPE_SERIAL_NUM 2 1153 #define CDAI_TYPE_PHYS_PATH 3 1154 #define CDAI_TYPE_RCAPLONG 4 1155 off_t bufsiz; /* IN: Size of external buffer */ 1156 #define CAM_SCSI_DEVID_MAXLEN 65536 /* length in buffer is an uint16_t */ 1157 off_t provsiz; /* OUT: Size required/used */ 1158 uint8_t *buf; /* IN/OUT: Buffer for requested data */ 1159 }; 1160 1161 /* 1162 * CCB for sending async events 1163 */ 1164 struct ccb_async { 1165 struct ccb_hdr ccb_h; 1166 uint32_t async_code; 1167 off_t async_arg_size; 1168 void *async_arg_ptr; 1169 }; 1170 1171 /* 1172 * Union of all CCB types for kernel space allocation. This union should 1173 * never be used for manipulating CCBs - its only use is for the allocation 1174 * and deallocation of raw CCB space and is the return type of xpt_ccb_alloc 1175 * and the argument to xpt_ccb_free. 1176 */ 1177 union ccb { 1178 struct ccb_hdr ccb_h; /* For convenience */ 1179 struct ccb_scsiio csio; 1180 struct ccb_getdev cgd; 1181 struct ccb_getdevlist cgdl; 1182 struct ccb_pathinq cpi; 1183 struct ccb_relsim crs; 1184 struct ccb_setasync csa; 1185 struct ccb_setdev csd; 1186 struct ccb_pathstats cpis; 1187 struct ccb_getdevstats cgds; 1188 struct ccb_dev_match cdm; 1189 struct ccb_trans_settings cts; 1190 struct ccb_calc_geometry ccg; 1191 struct ccb_sim_knob knob; 1192 struct ccb_abort cab; 1193 struct ccb_resetbus crb; 1194 struct ccb_resetdev crd; 1195 struct ccb_termio tio; 1196 struct ccb_accept_tio atio; 1197 struct ccb_scsiio ctio; 1198 struct ccb_en_lun cel; 1199 struct ccb_immed_notify cin; 1200 struct ccb_notify_ack cna; 1201 struct ccb_immediate_notify cin1; 1202 struct ccb_notify_acknowledge cna2; 1203 struct ccb_eng_inq cei; 1204 struct ccb_eng_exec cee; 1205 struct ccb_smpio smpio; 1206 struct ccb_rescan crcn; 1207 struct ccb_debug cdbg; 1208 struct ccb_ataio ataio; 1209 struct ccb_dev_advinfo cdai; 1210 struct ccb_async casync; 1211 }; 1212 1213 __BEGIN_DECLS 1214 static __inline void 1215 cam_fill_csio(struct ccb_scsiio *csio, u_int32_t retries, 1216 void (*cbfcnp)(struct cam_periph *, union ccb *), 1217 u_int32_t flags, u_int8_t tag_action, 1218 u_int8_t *data_ptr, u_int32_t dxfer_len, 1219 u_int8_t sense_len, u_int8_t cdb_len, 1220 u_int32_t timeout); 1221 1222 static __inline void 1223 cam_fill_ctio(struct ccb_scsiio *csio, u_int32_t retries, 1224 void (*cbfcnp)(struct cam_periph *, union ccb *), 1225 u_int32_t flags, u_int tag_action, u_int tag_id, 1226 u_int init_id, u_int scsi_status, u_int8_t *data_ptr, 1227 u_int32_t dxfer_len, u_int32_t timeout); 1228 1229 static __inline void 1230 cam_fill_ataio(struct ccb_ataio *ataio, u_int32_t retries, 1231 void (*cbfcnp)(struct cam_periph *, union ccb *), 1232 u_int32_t flags, u_int tag_action, 1233 u_int8_t *data_ptr, u_int32_t dxfer_len, 1234 u_int32_t timeout); 1235 1236 static __inline void 1237 cam_fill_smpio(struct ccb_smpio *smpio, uint32_t retries, 1238 void (*cbfcnp)(struct cam_periph *, union ccb *), uint32_t flags, 1239 uint8_t *smp_request, int smp_request_len, 1240 uint8_t *smp_response, int smp_response_len, 1241 uint32_t timeout); 1242 1243 static __inline void 1244 cam_fill_csio(struct ccb_scsiio *csio, u_int32_t retries, 1245 void (*cbfcnp)(struct cam_periph *, union ccb *), 1246 u_int32_t flags, u_int8_t tag_action, 1247 u_int8_t *data_ptr, u_int32_t dxfer_len, 1248 u_int8_t sense_len, u_int8_t cdb_len, 1249 u_int32_t timeout) 1250 { 1251 csio->ccb_h.func_code = XPT_SCSI_IO; 1252 csio->ccb_h.flags = flags; 1253 csio->ccb_h.xflags = 0; 1254 csio->ccb_h.retry_count = retries; 1255 csio->ccb_h.cbfcnp = cbfcnp; 1256 csio->ccb_h.timeout = timeout; 1257 csio->data_ptr = data_ptr; 1258 csio->dxfer_len = dxfer_len; 1259 csio->sense_len = sense_len; 1260 csio->cdb_len = cdb_len; 1261 csio->tag_action = tag_action; 1262 } 1263 1264 static __inline void 1265 cam_fill_ctio(struct ccb_scsiio *csio, u_int32_t retries, 1266 void (*cbfcnp)(struct cam_periph *, union ccb *), 1267 u_int32_t flags, u_int tag_action, u_int tag_id, 1268 u_int init_id, u_int scsi_status, u_int8_t *data_ptr, 1269 u_int32_t dxfer_len, u_int32_t timeout) 1270 { 1271 csio->ccb_h.func_code = XPT_CONT_TARGET_IO; 1272 csio->ccb_h.flags = flags; 1273 csio->ccb_h.xflags = 0; 1274 csio->ccb_h.retry_count = retries; 1275 csio->ccb_h.cbfcnp = cbfcnp; 1276 csio->ccb_h.timeout = timeout; 1277 csio->data_ptr = data_ptr; 1278 csio->dxfer_len = dxfer_len; 1279 csio->scsi_status = scsi_status; 1280 csio->tag_action = tag_action; 1281 csio->tag_id = tag_id; 1282 csio->init_id = init_id; 1283 } 1284 1285 static __inline void 1286 cam_fill_ataio(struct ccb_ataio *ataio, u_int32_t retries, 1287 void (*cbfcnp)(struct cam_periph *, union ccb *), 1288 u_int32_t flags, u_int tag_action, 1289 u_int8_t *data_ptr, u_int32_t dxfer_len, 1290 u_int32_t timeout) 1291 { 1292 ataio->ccb_h.func_code = XPT_ATA_IO; 1293 ataio->ccb_h.flags = flags; 1294 ataio->ccb_h.retry_count = retries; 1295 ataio->ccb_h.cbfcnp = cbfcnp; 1296 ataio->ccb_h.timeout = timeout; 1297 ataio->data_ptr = data_ptr; 1298 ataio->dxfer_len = dxfer_len; 1299 ataio->tag_action = tag_action; 1300 } 1301 1302 static __inline void 1303 cam_fill_smpio(struct ccb_smpio *smpio, uint32_t retries, 1304 void (*cbfcnp)(struct cam_periph *, union ccb *), uint32_t flags, 1305 uint8_t *smp_request, int smp_request_len, 1306 uint8_t *smp_response, int smp_response_len, 1307 uint32_t timeout) 1308 { 1309 #ifdef _KERNEL 1310 KASSERT((flags & CAM_DIR_MASK) == CAM_DIR_BOTH, 1311 ("direction != CAM_DIR_BOTH")); 1312 KASSERT((smp_request != NULL) && (smp_response != NULL), 1313 ("need valid request and response buffers")); 1314 KASSERT((smp_request_len != 0) && (smp_response_len != 0), 1315 ("need non-zero request and response lengths")); 1316 #endif /*_KERNEL*/ 1317 smpio->ccb_h.func_code = XPT_SMP_IO; 1318 smpio->ccb_h.flags = flags; 1319 smpio->ccb_h.retry_count = retries; 1320 smpio->ccb_h.cbfcnp = cbfcnp; 1321 smpio->ccb_h.timeout = timeout; 1322 smpio->smp_request = smp_request; 1323 smpio->smp_request_len = smp_request_len; 1324 smpio->smp_response = smp_response; 1325 smpio->smp_response_len = smp_response_len; 1326 } 1327 1328 static __inline void 1329 cam_set_ccbstatus(union ccb *ccb, cam_status status) 1330 { 1331 ccb->ccb_h.status &= ~CAM_STATUS_MASK; 1332 ccb->ccb_h.status |= status; 1333 } 1334 1335 static __inline cam_status 1336 cam_ccb_status(union ccb *ccb) 1337 { 1338 return ((cam_status)(ccb->ccb_h.status & CAM_STATUS_MASK)); 1339 } 1340 1341 void cam_calc_geometry(struct ccb_calc_geometry *ccg, int extended); 1342 1343 __END_DECLS 1344 1345 #endif /* _CAM_CAM_CCB_H */ 1346