1 /*- 2 * Data structures and definitions for the CAM system. 3 * 4 * Copyright (c) 1997 Justin T. Gibbs. 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions, and the following disclaimer, 12 * without modification, immediately at the beginning of the file. 13 * 2. The name of the author may not be used to endorse or promote products 14 * derived from this software without specific prior written permission. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 19 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR 20 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 22 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 26 * SUCH DAMAGE. 27 * 28 * $FreeBSD$ 29 */ 30 31 #ifndef _CAM_CAM_H 32 #define _CAM_CAM_H 1 33 34 #ifdef _KERNEL 35 #include <opt_cam.h> 36 #endif 37 38 #include <sys/cdefs.h> 39 40 typedef u_int path_id_t; 41 typedef u_int target_id_t; 42 typedef u_int lun_id_t; 43 typedef union { 44 u_int64_t lun64; 45 u_int8_t lun[8]; 46 } lun64_id_t; 47 48 #define CAM_XPT_PATH_ID ((path_id_t)~0) 49 #define CAM_BUS_WILDCARD ((path_id_t)~0) 50 #define CAM_TARGET_WILDCARD ((target_id_t)~0) 51 #define CAM_LUN_WILDCARD ((lun_id_t)~0) 52 53 /* 54 * Maximum length for a CAM CDB. 55 */ 56 #define CAM_MAX_CDBLEN 16 57 58 /* 59 * Definition of a CAM peripheral driver entry. Peripheral drivers instantiate 60 * one of these for each device they wish to communicate with and pass it into 61 * the xpt layer when they wish to schedule work on that device via the 62 * xpt_schedule API. 63 */ 64 struct cam_periph; 65 66 /* 67 * Priority information for a CAM structure. 68 */ 69 typedef enum { 70 CAM_RL_HOST, 71 CAM_RL_BUS, 72 CAM_RL_XPT, 73 CAM_RL_DEV, 74 CAM_RL_NORMAL, 75 CAM_RL_VALUES 76 } cam_rl; 77 /* 78 * The generation number is incremented everytime a new entry is entered into 79 * the queue giving round robin per priority level scheduling. 80 */ 81 typedef struct { 82 u_int32_t priority; 83 #define CAM_PRIORITY_HOST ((CAM_RL_HOST << 8) + 0x80) 84 #define CAM_PRIORITY_BUS ((CAM_RL_BUS << 8) + 0x80) 85 #define CAM_PRIORITY_XPT ((CAM_RL_XPT << 8) + 0x80) 86 #define CAM_PRIORITY_DEV ((CAM_RL_DEV << 8) + 0x80) 87 #define CAM_PRIORITY_OOB (CAM_RL_DEV << 8) 88 #define CAM_PRIORITY_NORMAL ((CAM_RL_NORMAL << 8) + 0x80) 89 #define CAM_PRIORITY_NONE (u_int32_t)-1 90 u_int32_t generation; 91 int index; 92 #define CAM_UNQUEUED_INDEX -1 93 #define CAM_ACTIVE_INDEX -2 94 #define CAM_DONEQ_INDEX -3 95 #define CAM_EXTRAQ_INDEX INT_MAX 96 } cam_pinfo; 97 98 /* 99 * Macro to compare two generation numbers. It is used like this: 100 * 101 * if (GENERATIONCMP(a, >=, b)) 102 * ...; 103 * 104 * GERERATIONCMP uses modular arithmetic to guard against wraps 105 * wraps in the generation number. 106 */ 107 #define GENERATIONCMP(x, op, y) ((int32_t)((x) - (y)) op 0) 108 109 /* CAM flags XXX Move to cam_periph.h ??? */ 110 typedef enum { 111 CAM_FLAG_NONE = 0x00, 112 CAM_EXPECT_INQ_CHANGE = 0x01, 113 CAM_RETRY_SELTO = 0x02 /* Retry Selection Timeouts */ 114 } cam_flags; 115 116 enum { 117 SF_RETRY_UA = 0x01, /* Retry UNIT ATTENTION conditions. */ 118 SF_NO_PRINT = 0x02, /* Never print error status. */ 119 SF_QUIET_IR = 0x04, /* Be quiet about Illegal Request reponses */ 120 SF_PRINT_ALWAYS = 0x08, /* Always print error status. */ 121 SF_NO_RECOVERY = 0x10, /* Don't do active error recovery. */ 122 SF_NO_RETRY = 0x20 /* Don't do any retries. */ 123 }; 124 125 /* CAM Status field values */ 126 typedef enum { 127 /* CCB request is in progress */ 128 CAM_REQ_INPROG = 0x00, 129 130 /* CCB request completed without error */ 131 CAM_REQ_CMP = 0x01, 132 133 /* CCB request aborted by the host */ 134 CAM_REQ_ABORTED = 0x02, 135 136 /* Unable to abort CCB request */ 137 CAM_UA_ABORT = 0x03, 138 139 /* CCB request completed with an error */ 140 CAM_REQ_CMP_ERR = 0x04, 141 142 /* CAM subsystem is busy */ 143 CAM_BUSY = 0x05, 144 145 /* CCB request was invalid */ 146 CAM_REQ_INVALID = 0x06, 147 148 /* Supplied Path ID is invalid */ 149 CAM_PATH_INVALID = 0x07, 150 151 /* SCSI Device Not Installed/there */ 152 CAM_DEV_NOT_THERE = 0x08, 153 154 /* Unable to terminate I/O CCB request */ 155 CAM_UA_TERMIO = 0x09, 156 157 /* Target Selection Timeout */ 158 CAM_SEL_TIMEOUT = 0x0a, 159 160 /* Command timeout */ 161 CAM_CMD_TIMEOUT = 0x0b, 162 163 /* SCSI error, look at error code in CCB */ 164 CAM_SCSI_STATUS_ERROR = 0x0c, 165 166 /* Message Reject Received */ 167 CAM_MSG_REJECT_REC = 0x0d, 168 169 /* SCSI Bus Reset Sent/Received */ 170 CAM_SCSI_BUS_RESET = 0x0e, 171 172 /* Uncorrectable parity error occurred */ 173 CAM_UNCOR_PARITY = 0x0f, 174 175 /* Autosense: request sense cmd fail */ 176 CAM_AUTOSENSE_FAIL = 0x10, 177 178 /* No HBA Detected error */ 179 CAM_NO_HBA = 0x11, 180 181 /* Data Overrun error */ 182 CAM_DATA_RUN_ERR = 0x12, 183 184 /* Unexpected Bus Free */ 185 CAM_UNEXP_BUSFREE = 0x13, 186 187 /* Target Bus Phase Sequence Failure */ 188 CAM_SEQUENCE_FAIL = 0x14, 189 190 /* CCB length supplied is inadequate */ 191 CAM_CCB_LEN_ERR = 0x15, 192 193 /* Unable to provide requested capability*/ 194 CAM_PROVIDE_FAIL = 0x16, 195 196 /* A SCSI BDR msg was sent to target */ 197 CAM_BDR_SENT = 0x17, 198 199 /* CCB request terminated by the host */ 200 CAM_REQ_TERMIO = 0x18, 201 202 /* Unrecoverable Host Bus Adapter Error */ 203 CAM_UNREC_HBA_ERROR = 0x19, 204 205 /* Request was too large for this host */ 206 CAM_REQ_TOO_BIG = 0x1a, 207 208 /* 209 * This request should be requeued to preserve 210 * transaction ordering. This typically occurs 211 * when the SIM recognizes an error that should 212 * freeze the queue and must place additional 213 * requests for the target at the sim level 214 * back into the XPT queue. 215 */ 216 CAM_REQUEUE_REQ = 0x1b, 217 218 /* ATA error, look at error code in CCB */ 219 CAM_ATA_STATUS_ERROR = 0x1c, 220 221 /* Initiator/Target Nexus lost. */ 222 CAM_SCSI_IT_NEXUS_LOST = 0x1d, 223 224 /* SMP error, look at error code in CCB */ 225 CAM_SMP_STATUS_ERROR = 0x1e, 226 227 /* 228 * Command completed without error but exceeded the soft 229 * timeout threshold. 230 */ 231 CAM_REQ_SOFTTIMEOUT = 0x1f, 232 233 /* 234 * 0x20 - 0x32 are unassigned 235 */ 236 237 /* Initiator Detected Error */ 238 CAM_IDE = 0x33, 239 240 /* Resource Unavailable */ 241 CAM_RESRC_UNAVAIL = 0x34, 242 243 /* Unacknowledged Event by Host */ 244 CAM_UNACKED_EVENT = 0x35, 245 246 /* Message Received in Host Target Mode */ 247 CAM_MESSAGE_RECV = 0x36, 248 249 /* Invalid CDB received in Host Target Mode */ 250 CAM_INVALID_CDB = 0x37, 251 252 /* Lun supplied is invalid */ 253 CAM_LUN_INVALID = 0x38, 254 255 /* Target ID supplied is invalid */ 256 CAM_TID_INVALID = 0x39, 257 258 /* The requested function is not available */ 259 CAM_FUNC_NOTAVAIL = 0x3a, 260 261 /* Nexus is not established */ 262 CAM_NO_NEXUS = 0x3b, 263 264 /* The initiator ID is invalid */ 265 CAM_IID_INVALID = 0x3c, 266 267 /* The SCSI CDB has been received */ 268 CAM_CDB_RECVD = 0x3d, 269 270 /* The LUN is already enabled for target mode */ 271 CAM_LUN_ALRDY_ENA = 0x3e, 272 273 /* SCSI Bus Busy */ 274 CAM_SCSI_BUSY = 0x3f, 275 276 277 /* 278 * Flags 279 */ 280 281 /* The DEV queue is frozen w/this err */ 282 CAM_DEV_QFRZN = 0x40, 283 284 /* Autosense data valid for target */ 285 CAM_AUTOSNS_VALID = 0x80, 286 287 /* SIM ready to take more commands */ 288 CAM_RELEASE_SIMQ = 0x100, 289 290 /* SIM has this command in it's queue */ 291 CAM_SIM_QUEUED = 0x200, 292 293 /* Quality of service data is valid */ 294 CAM_QOS_VALID = 0x400, 295 296 /* Mask bits for just the status # */ 297 CAM_STATUS_MASK = 0x3F, 298 299 /* 300 * Target Specific Adjunct Status 301 */ 302 303 /* sent sense with status */ 304 CAM_SENT_SENSE = 0x40000000 305 } cam_status; 306 307 typedef enum { 308 CAM_ESF_NONE = 0x00, 309 CAM_ESF_COMMAND = 0x01, 310 CAM_ESF_CAM_STATUS = 0x02, 311 CAM_ESF_PROTO_STATUS = 0x04, 312 CAM_ESF_ALL = 0xff 313 } cam_error_string_flags; 314 315 typedef enum { 316 CAM_EPF_NONE = 0x00, 317 CAM_EPF_MINIMAL = 0x01, 318 CAM_EPF_NORMAL = 0x02, 319 CAM_EPF_ALL = 0x03, 320 CAM_EPF_LEVEL_MASK = 0x0f 321 /* All bits above bit 3 are protocol-specific */ 322 } cam_error_proto_flags; 323 324 typedef enum { 325 CAM_ESF_PRINT_NONE = 0x00, 326 CAM_ESF_PRINT_STATUS = 0x10, 327 CAM_ESF_PRINT_SENSE = 0x20 328 } cam_error_scsi_flags; 329 330 typedef enum { 331 CAM_ESMF_PRINT_NONE = 0x00, 332 CAM_ESMF_PRINT_STATUS = 0x10, 333 CAM_ESMF_PRINT_FULL_CMD = 0x20, 334 } cam_error_smp_flags; 335 336 typedef enum { 337 CAM_EAF_PRINT_NONE = 0x00, 338 CAM_EAF_PRINT_STATUS = 0x10, 339 CAM_EAF_PRINT_RESULT = 0x20 340 } cam_error_ata_flags; 341 342 struct cam_status_entry 343 { 344 cam_status status_code; 345 const char *status_text; 346 }; 347 348 extern const struct cam_status_entry cam_status_table[]; 349 extern const int num_cam_status_entries; 350 #ifdef _KERNEL 351 extern int cam_sort_io_queues; 352 #endif 353 union ccb; 354 355 #ifdef SYSCTL_DECL /* from sysctl.h */ 356 SYSCTL_DECL(_kern_cam); 357 #endif 358 359 __BEGIN_DECLS 360 typedef int (cam_quirkmatch_t)(caddr_t, caddr_t); 361 362 caddr_t cam_quirkmatch(caddr_t target, caddr_t quirk_table, int num_entries, 363 int entry_size, cam_quirkmatch_t *comp_func); 364 365 void cam_strvis(u_int8_t *dst, const u_int8_t *src, int srclen, int dstlen); 366 367 int cam_strmatch(const u_int8_t *str, const u_int8_t *pattern, int str_len); 368 const struct cam_status_entry* 369 cam_fetch_status_entry(cam_status status); 370 #ifdef _KERNEL 371 char * cam_error_string(union ccb *ccb, char *str, int str_len, 372 cam_error_string_flags flags, 373 cam_error_proto_flags proto_flags); 374 void cam_error_print(union ccb *ccb, cam_error_string_flags flags, 375 cam_error_proto_flags proto_flags); 376 #else /* _KERNEL */ 377 struct cam_device; 378 379 char * cam_error_string(struct cam_device *device, union ccb *ccb, char *str, 380 int str_len, cam_error_string_flags flags, 381 cam_error_proto_flags proto_flags); 382 void cam_error_print(struct cam_device *device, union ccb *ccb, 383 cam_error_string_flags flags, 384 cam_error_proto_flags proto_flags, FILE *ofile); 385 #endif /* _KERNEL */ 386 __END_DECLS 387 388 #ifdef _KERNEL 389 static __inline void cam_init_pinfo(cam_pinfo *pinfo); 390 391 static __inline void cam_init_pinfo(cam_pinfo *pinfo) 392 { 393 pinfo->priority = CAM_PRIORITY_NONE; 394 pinfo->index = CAM_UNQUEUED_INDEX; 395 } 396 #endif 397 398 #endif /* _CAM_CAM_H */ 399