xref: /freebsd/sys/cam/cam.c (revision 401ab69cff8fa2320a9f8ea4baa114a6da6c952b)
1 /*-
2  * Generic utility routines for the Common Access Method layer.
3  *
4  * SPDX-License-Identifier: BSD-2-Clause
5  *
6  * Copyright (c) 1997 Justin T. Gibbs.
7  * All rights reserved.
8  *
9  * Redistribution and use in source and binary forms, with or without
10  * modification, are permitted provided that the following conditions
11  * are met:
12  * 1. Redistributions of source code must retain the above copyright
13  *    notice, this list of conditions, and the following disclaimer,
14  *    without modification, immediately at the beginning of the file.
15  * 2. The name of the author may not be used to endorse or promote products
16  *    derived from this software without specific prior written permission.
17  *
18  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
19  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
20  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
21  * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
22  * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
23  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
24  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
25  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
26  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
27  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
28  * SUCH DAMAGE.
29  */
30 
31 #include <sys/cdefs.h>
32 #include <sys/param.h>
33 #ifdef _KERNEL
34 #include <sys/systm.h>
35 #include <sys/kernel.h>
36 #include <sys/memdesc.h>
37 #include <sys/sysctl.h>
38 #else /* _KERNEL */
39 #include <stdlib.h>
40 #include <stdio.h>
41 #include <string.h>
42 #include <camlib.h>
43 #endif /* _KERNEL */
44 
45 #include <cam/cam.h>
46 #include <cam/cam_ccb.h>
47 #include <cam/scsi/scsi_all.h>
48 #include <cam/scsi/smp_all.h>
49 #include <sys/sbuf.h>
50 
51 #ifdef _KERNEL
52 #include <sys/libkern.h>
53 #include <machine/bus.h>
54 #include <cam/cam_queue.h>
55 #include <cam/cam_xpt.h>
56 
57 FEATURE(scbus, "SCSI devices support");
58 
59 #endif
60 
61 static int	camstatusentrycomp(const void *key, const void *member);
62 
63 const struct cam_status_entry cam_status_table[] = {
64 	{ CAM_REQ_INPROG,	 "CCB request is in progress"		     },
65 	{ CAM_REQ_CMP,		 "CCB request completed without error"	     },
66 	{ CAM_REQ_ABORTED,	 "CCB request aborted by the host"	     },
67 	{ CAM_UA_ABORT,		 "Unable to abort CCB request"		     },
68 	{ CAM_REQ_CMP_ERR,	 "CCB request completed with an error"	     },
69 	{ CAM_BUSY,		 "CAM subsystem is busy"		     },
70 	{ CAM_REQ_INVALID,	 "CCB request was invalid"		     },
71 	{ CAM_PATH_INVALID,	 "Supplied Path ID is invalid"		     },
72 	{ CAM_DEV_NOT_THERE,	 "Device Not Present"			     },
73 	{ CAM_UA_TERMIO,	 "Unable to terminate I/O CCB request"	     },
74 	{ CAM_SEL_TIMEOUT,	 "Selection Timeout"			     },
75 	{ CAM_CMD_TIMEOUT,	 "Command timeout"			     },
76 	{ CAM_SCSI_STATUS_ERROR, "SCSI Status Error"			     },
77 	{ CAM_MSG_REJECT_REC,	 "Message Reject Reveived"		     },
78 	{ CAM_SCSI_BUS_RESET,	 "SCSI Bus Reset Sent/Received"		     },
79 	{ CAM_UNCOR_PARITY,	 "Uncorrectable parity/CRC error"	     },
80 	{ CAM_AUTOSENSE_FAIL,	 "Auto-Sense Retrieval Failed"		     },
81 	{ CAM_NO_HBA,		 "No HBA Detected"			     },
82 	{ CAM_DATA_RUN_ERR,	 "Data Overrun error"			     },
83 	{ CAM_UNEXP_BUSFREE,	 "Unexpected Bus Free"			     },
84 	{ CAM_SEQUENCE_FAIL,	 "Target Bus Phase Sequence Failure"	     },
85 	{ CAM_CCB_LEN_ERR,	 "CCB length supplied is inadequate"	     },
86 	{ CAM_PROVIDE_FAIL,	 "Unable to provide requested capability"    },
87 	{ CAM_BDR_SENT,		 "SCSI BDR Message Sent"		     },
88 	{ CAM_REQ_TERMIO,	 "CCB request terminated by the host"	     },
89 	{ CAM_UNREC_HBA_ERROR,	 "Unrecoverable Host Bus Adapter Error"	     },
90 	{ CAM_REQ_TOO_BIG,	 "The request was too large for this host"   },
91 	{ CAM_REQUEUE_REQ,	 "Unconditionally Re-queue Request",	     },
92 	{ CAM_ATA_STATUS_ERROR,	 "ATA Status Error"			     },
93 	{ CAM_SCSI_IT_NEXUS_LOST,"Initiator/Target Nexus Lost"               },
94 	{ CAM_SMP_STATUS_ERROR,	 "SMP Status Error"                          },
95 	{ CAM_IDE,		 "Initiator Detected Error Message Received" },
96 	{ CAM_RESRC_UNAVAIL,	 "Resource Unavailable"			     },
97 	{ CAM_UNACKED_EVENT,	 "Unacknowledged Event by Host"		     },
98 	{ CAM_MESSAGE_RECV,	 "Message Received in Host Target Mode"	     },
99 	{ CAM_INVALID_CDB,	 "Invalid CDB received in Host Target Mode"  },
100 	{ CAM_LUN_INVALID,	 "Invalid Lun"				     },
101 	{ CAM_TID_INVALID,	 "Invalid Target ID"			     },
102 	{ CAM_FUNC_NOTAVAIL,	 "Function Not Available"		     },
103 	{ CAM_NO_NEXUS,		 "Nexus Not Established"		     },
104 	{ CAM_IID_INVALID,	 "Invalid Initiator ID"			     },
105 	{ CAM_CDB_RECVD,	 "CDB Received"				     },
106 	{ CAM_LUN_ALRDY_ENA,	 "LUN Already Enabled for Target Mode"	     },
107 	{ CAM_SCSI_BUSY,	 "SCSI Bus Busy"			     },
108 };
109 
110 #ifdef _KERNEL
111 SYSCTL_NODE(_kern, OID_AUTO, cam, CTLFLAG_RD | CTLFLAG_MPSAFE, 0,
112     "CAM Subsystem");
113 
114 #ifndef CAM_DEFAULT_SORT_IO_QUEUES
115 #define CAM_DEFAULT_SORT_IO_QUEUES 1
116 #endif
117 
118 int cam_sort_io_queues = CAM_DEFAULT_SORT_IO_QUEUES;
119 SYSCTL_INT(_kern_cam, OID_AUTO, sort_io_queues, CTLFLAG_RWTUN,
120     &cam_sort_io_queues, 0, "Sort IO queues to try and optimise disk access patterns");
121 #endif
122 
123 void
124 cam_strvis(uint8_t *dst, const uint8_t *src, int srclen, int dstlen)
125 {
126 	cam_strvis_flag(dst, src, srclen, dstlen,
127 	    CAM_STRVIS_FLAG_NONASCII_ESC);
128 }
129 
130 void
131 cam_strvis_flag(uint8_t *dst, const uint8_t *src, int srclen, int dstlen,
132 		uint32_t flags)
133 {
134 	struct sbuf sb;
135 
136 	sbuf_new(&sb, dst, dstlen, SBUF_FIXEDLEN);
137 	cam_strvis_sbuf(&sb, src, srclen, flags);
138 	sbuf_finish(&sb);
139 }
140 
141 void
142 cam_strvis_sbuf(struct sbuf *sb, const uint8_t *src, int srclen,
143 		uint32_t flags)
144 {
145 
146 	/* Trim leading/trailing spaces, nulls. */
147 	while (srclen > 0 && src[0] == ' ')
148 		src++, srclen--;
149 	while (srclen > 0
150 	    && (src[srclen-1] == ' ' || src[srclen-1] == '\0'))
151 		srclen--;
152 
153 	while (srclen > 0) {
154 		if (*src < 0x20 || *src >= 0x80) {
155 			/* SCSI-II Specifies that these should never occur. */
156 			/* non-printable character */
157 			switch (flags & CAM_STRVIS_FLAG_NONASCII_MASK) {
158 			case CAM_STRVIS_FLAG_NONASCII_ESC:
159 				sbuf_printf(sb, "\\%c%c%c",
160 				    ((*src & 0300) >> 6) + '0',
161 				    ((*src & 0070) >> 3) + '0',
162 				    ((*src & 0007) >> 0) + '0');
163 				break;
164 			case CAM_STRVIS_FLAG_NONASCII_RAW:
165 				/*
166 				 * If we run into a NUL, just transform it
167 				 * into a space.
168 				 */
169 				if (*src != 0x00)
170 					sbuf_putc(sb, *src);
171 				else
172 					sbuf_putc(sb, ' ');
173 				break;
174 			case CAM_STRVIS_FLAG_NONASCII_SPC:
175 				sbuf_putc(sb, ' ');
176 				break;
177 			case CAM_STRVIS_FLAG_NONASCII_TRIM:
178 			default:
179 				break;
180 			}
181 		} else {
182 			/* normal character */
183 			sbuf_putc(sb, *src);
184 		}
185 		src++;
186 		srclen--;
187 	}
188 }
189 
190 /*
191  * Compare string with pattern, returning 0 on match.
192  * Short pattern matches trailing blanks in name,
193  * Shell globbing rules apply: * matches 0 or more characters,
194  * ? matchces one character, [...] denotes a set to match one char,
195  * [^...] denotes a complimented set to match one character.
196  * Spaces in str used to match anything in the pattern string
197  * but was removed because it's a bug. No current patterns require
198  * it, as far as I know, but it's impossible to know what drives
199  * returned.
200  *
201  * Each '*' generates recursion, so keep the number of * in check.
202  */
203 int
204 cam_strmatch(const uint8_t *str, const uint8_t *pattern, int str_len)
205 {
206 
207 	while (*pattern != '\0' && str_len > 0) {
208 		if (*pattern == '*') {
209 			pattern++;
210 			if (*pattern == '\0')
211 				return (0);
212 			do {
213 				if (cam_strmatch(str, pattern, str_len) == 0)
214 					return (0);
215 				str++;
216 				str_len--;
217 			} while (str_len > 0);
218 			return (1);
219 		} else if (*pattern == '[') {
220 			int negate_range, ok;
221 			uint8_t pc = UCHAR_MAX;
222 			uint8_t sc;
223 
224 			ok = 0;
225 			sc = *str++;
226 			str_len--;
227 			pattern++;
228 			if ((negate_range = (*pattern == '^')) != 0)
229 				pattern++;
230 			while ((*pattern != ']') && *pattern != '\0') {
231 				if (*pattern == '-') {
232 					if (pattern[1] == '\0') /* Bad pattern */
233 						return (1);
234 					if (sc >= pc && sc <= pattern[1])
235 						ok = 1;
236 					pattern++;
237 				} else if (*pattern == sc)
238 					ok = 1;
239 				pc = *pattern;
240 				pattern++;
241 			}
242 			if (ok == negate_range)
243 				return (1);
244 			pattern++;
245 		} else if (*pattern == '?') {
246 			/*
247 			 * NB: || *str == ' ' of the old code is a bug and was
248 			 * removed.  If you add it back, keep this the last if
249 			 * before the naked else */
250 			pattern++;
251 			str++;
252 			str_len--;
253 		} else {
254 			if (*str != *pattern)
255 				return (1);
256 			pattern++;
257 			str++;
258 			str_len--;
259 		}
260 	}
261 
262 	/* '*' is allowed to match nothing, so gobble it */
263 	while (*pattern == '*')
264 		pattern++;
265 
266 	if ( *pattern != '\0') {
267 		/* Pattern not fully consumed.  Not a match */
268 		return (1);
269 	}
270 
271 	/* Eat trailing spaces, which get added by SAT */
272 	while (str_len > 0 && *str == ' ') {
273 		str++;
274 		str_len--;
275 	}
276 
277 	return (str_len);
278 }
279 
280 caddr_t
281 cam_quirkmatch(caddr_t target, caddr_t quirk_table, int num_entries,
282 	       int entry_size, cam_quirkmatch_t *comp_func)
283 {
284 	for (; num_entries > 0; num_entries--, quirk_table += entry_size) {
285 		if ((*comp_func)(target, quirk_table) == 0)
286 			return (quirk_table);
287 	}
288 	return (NULL);
289 }
290 
291 const struct cam_status_entry*
292 cam_fetch_status_entry(cam_status status)
293 {
294 	status &= CAM_STATUS_MASK;
295 	return (bsearch(&status, &cam_status_table,
296 			nitems(cam_status_table),
297 			sizeof(*cam_status_table),
298 			camstatusentrycomp));
299 }
300 
301 static int
302 camstatusentrycomp(const void *key, const void *member)
303 {
304 	cam_status status;
305 	const struct cam_status_entry *table_entry;
306 
307 	status = *(const cam_status *)key;
308 	table_entry = (const struct cam_status_entry *)member;
309 
310 	return (status - table_entry->status_code);
311 }
312 
313 #ifdef _KERNEL
314 char *
315 cam_error_string(union ccb *ccb, char *str, int str_len,
316 		 cam_error_string_flags flags,
317 		 cam_error_proto_flags proto_flags)
318 #else /* !_KERNEL */
319 char *
320 cam_error_string(struct cam_device *device, union ccb *ccb, char *str,
321 		 int str_len, cam_error_string_flags flags,
322 		 cam_error_proto_flags proto_flags)
323 #endif /* _KERNEL/!_KERNEL */
324 {
325 	char path_str[64];
326 	struct sbuf sb;
327 
328 	if ((ccb == NULL)
329 	 || (str == NULL)
330 	 || (str_len <= 0))
331 		return(NULL);
332 
333 	if (flags == CAM_ESF_NONE)
334 		return(NULL);
335 
336 	switch (ccb->ccb_h.func_code) {
337 		case XPT_ATA_IO:
338 			switch (proto_flags & CAM_EPF_LEVEL_MASK) {
339 			case CAM_EPF_NONE:
340 				break;
341 			case CAM_EPF_ALL:
342 			case CAM_EPF_NORMAL:
343 				proto_flags |= CAM_EAF_PRINT_RESULT;
344 				/* FALLTHROUGH */
345 			case CAM_EPF_MINIMAL:
346 				proto_flags |= CAM_EAF_PRINT_STATUS;
347 				/* FALLTHROUGH */
348 			default:
349 				break;
350 			}
351 			break;
352 		case XPT_SCSI_IO:
353 			switch (proto_flags & CAM_EPF_LEVEL_MASK) {
354 			case CAM_EPF_NONE:
355 				break;
356 			case CAM_EPF_ALL:
357 			case CAM_EPF_NORMAL:
358 				proto_flags |= CAM_ESF_PRINT_SENSE;
359 				/* FALLTHROUGH */
360 			case CAM_EPF_MINIMAL:
361 				proto_flags |= CAM_ESF_PRINT_STATUS;
362 				/* FALLTHROUGH */
363 			default:
364 				break;
365 			}
366 			break;
367 		case XPT_SMP_IO:
368 			switch (proto_flags & CAM_EPF_LEVEL_MASK) {
369 			case CAM_EPF_NONE:
370 				break;
371 			case CAM_EPF_ALL:
372 				proto_flags |= CAM_ESMF_PRINT_FULL_CMD;
373 				/* FALLTHROUGH */
374 			case CAM_EPF_NORMAL:
375 			case CAM_EPF_MINIMAL:
376 				proto_flags |= CAM_ESMF_PRINT_STATUS;
377 				/* FALLTHROUGH */
378 			default:
379 				break;
380 			}
381 			break;
382 		default:
383 			break;
384 	}
385 #ifdef _KERNEL
386 	xpt_path_string(ccb->csio.ccb_h.path, path_str, sizeof(path_str));
387 #else /* !_KERNEL */
388 	cam_path_string(device, path_str, sizeof(path_str));
389 #endif /* _KERNEL/!_KERNEL */
390 
391 	sbuf_new(&sb, str, str_len, 0);
392 
393 	if (flags & CAM_ESF_COMMAND) {
394 		sbuf_cat(&sb, path_str);
395 		switch (ccb->ccb_h.func_code) {
396 		case XPT_ATA_IO:
397 			ata_command_sbuf(&ccb->ataio, &sb);
398 			break;
399 		case XPT_SCSI_IO:
400 #ifdef _KERNEL
401 			scsi_command_string(&ccb->csio, &sb);
402 #else /* !_KERNEL */
403 			scsi_command_string(device, &ccb->csio, &sb);
404 #endif /* _KERNEL/!_KERNEL */
405 			break;
406 		case XPT_SMP_IO:
407 			smp_command_sbuf(&ccb->smpio, &sb, path_str, 79 -
408 					 strlen(path_str), (proto_flags &
409 					 CAM_ESMF_PRINT_FULL_CMD) ? 79 : 0);
410 			break;
411 		case XPT_NVME_IO:
412 		case XPT_NVME_ADMIN:
413 			nvme_command_sbuf(&ccb->nvmeio, &sb);
414 			break;
415 		default:
416 			sbuf_printf(&sb, "CAM func %#x",
417 			    ccb->ccb_h.func_code);
418 			break;
419 		}
420 		sbuf_printf(&sb, "\n");
421 	}
422 
423 	if (flags & CAM_ESF_CAM_STATUS) {
424 		cam_status status;
425 		const struct cam_status_entry *entry;
426 
427 		sbuf_cat(&sb, path_str);
428 
429 		status = ccb->ccb_h.status & CAM_STATUS_MASK;
430 
431 		entry = cam_fetch_status_entry(status);
432 
433 		if (entry == NULL)
434 			sbuf_printf(&sb, "CAM status: Unknown (%#x)\n",
435 				    ccb->ccb_h.status);
436 		else
437 			sbuf_printf(&sb, "CAM status: %s\n",
438 				    entry->status_text);
439 	}
440 
441 	if (flags & CAM_ESF_PROTO_STATUS) {
442 
443 		switch (ccb->ccb_h.func_code) {
444 		case XPT_ATA_IO:
445 			if ((ccb->ccb_h.status & CAM_STATUS_MASK) !=
446 			     CAM_ATA_STATUS_ERROR)
447 				break;
448 			if (proto_flags & CAM_EAF_PRINT_STATUS) {
449 				sbuf_cat(&sb, path_str);
450 				ata_status_sbuf(&ccb->ataio, &sb);
451 				sbuf_printf(&sb, "\n");
452 			}
453 			if (proto_flags & CAM_EAF_PRINT_RESULT) {
454 				sbuf_cat(&sb, path_str);
455 				sbuf_printf(&sb, "RES: ");
456 				ata_res_sbuf(&ccb->ataio.res, &sb);
457 				sbuf_printf(&sb, "\n");
458 			}
459 
460 			break;
461 		case XPT_SCSI_IO:
462 			if ((ccb->ccb_h.status & CAM_STATUS_MASK) !=
463 			     CAM_SCSI_STATUS_ERROR)
464 				break;
465 
466 			if (proto_flags & CAM_ESF_PRINT_STATUS) {
467 				sbuf_cat(&sb, path_str);
468 				sbuf_printf(&sb, "SCSI status: %s\n",
469 					    scsi_status_string(&ccb->csio));
470 			}
471 
472 			if ((proto_flags & CAM_ESF_PRINT_SENSE)
473 			 && (ccb->csio.scsi_status == SCSI_STATUS_CHECK_COND)
474 			 && (ccb->ccb_h.status & CAM_AUTOSNS_VALID)) {
475 #ifdef _KERNEL
476 				scsi_sense_sbuf(&ccb->csio, &sb,
477 						SSS_FLAG_NONE);
478 #else /* !_KERNEL */
479 				scsi_sense_sbuf(device, &ccb->csio, &sb,
480 						SSS_FLAG_NONE);
481 #endif /* _KERNEL/!_KERNEL */
482 			}
483 			break;
484 		case XPT_SMP_IO:
485 			if ((ccb->ccb_h.status & CAM_STATUS_MASK) !=
486 			     CAM_SMP_STATUS_ERROR)
487 				break;
488 
489 			if (proto_flags & CAM_ESF_PRINT_STATUS) {
490 				sbuf_cat(&sb, path_str);
491 				sbuf_printf(&sb, "SMP status: %s (%#x)\n",
492 				    smp_error_desc(ccb->smpio.smp_response[2]),
493 						   ccb->smpio.smp_response[2]);
494 			}
495 			/* There is no SMP equivalent to SCSI sense. */
496 			break;
497 		default:
498 			break;
499 		}
500 	}
501 
502 	sbuf_finish(&sb);
503 
504 	return(sbuf_data(&sb));
505 }
506 
507 #ifdef _KERNEL
508 
509 void
510 cam_error_print(union ccb *ccb, cam_error_string_flags flags,
511 		cam_error_proto_flags proto_flags)
512 {
513 	char str[512];
514 
515 	printf("%s", cam_error_string(ccb, str, sizeof(str), flags,
516 	       proto_flags));
517 }
518 
519 #else /* !_KERNEL */
520 
521 void
522 cam_error_print(struct cam_device *device, union ccb *ccb,
523 		cam_error_string_flags flags, cam_error_proto_flags proto_flags,
524 		FILE *ofile)
525 {
526 	char str[512];
527 
528 	if ((device == NULL) || (ccb == NULL) || (ofile == NULL))
529 		return;
530 
531 	fprintf(ofile, "%s", cam_error_string(device, ccb, str, sizeof(str),
532 		flags, proto_flags));
533 }
534 
535 #endif /* _KERNEL/!_KERNEL */
536 
537 /*
538  * Common calculate geometry fuction
539  *
540  * Caller should set ccg->volume_size and block_size.
541  * The extended parameter should be zero if extended translation
542  * should not be used.
543  */
544 void
545 cam_calc_geometry(struct ccb_calc_geometry *ccg, int extended)
546 {
547 	uint32_t size_mb, secs_per_cylinder;
548 
549 	if (ccg->block_size == 0) {
550 		ccg->ccb_h.status = CAM_REQ_CMP_ERR;
551 		return;
552 	}
553 	size_mb = (1024L * 1024L) / ccg->block_size;
554 	if (size_mb == 0) {
555 		ccg->ccb_h.status = CAM_REQ_CMP_ERR;
556 		return;
557 	}
558 	size_mb = ccg->volume_size / size_mb;
559 	if (size_mb > 1024 && extended) {
560 		ccg->heads = 255;
561 		ccg->secs_per_track = 63;
562 	} else {
563 		ccg->heads = 64;
564 		ccg->secs_per_track = 32;
565 	}
566 	secs_per_cylinder = ccg->heads * ccg->secs_per_track;
567 	if (secs_per_cylinder == 0) {
568 		ccg->ccb_h.status = CAM_REQ_CMP_ERR;
569 		return;
570 	}
571 	ccg->cylinders = ccg->volume_size / secs_per_cylinder;
572 	ccg->ccb_h.status = CAM_REQ_CMP;
573 }
574 
575 #ifdef _KERNEL
576 struct memdesc
577 memdesc_ccb(union ccb *ccb)
578 {
579 	struct ccb_hdr *ccb_h;
580 	void *data_ptr;
581 	uint32_t dxfer_len;
582 	uint16_t sglist_cnt;
583 
584 	ccb_h = &ccb->ccb_h;
585 	switch (ccb_h->func_code) {
586 	case XPT_SCSI_IO: {
587 		struct ccb_scsiio *csio;
588 
589 		csio = &ccb->csio;
590 		data_ptr = csio->data_ptr;
591 		dxfer_len = csio->dxfer_len;
592 		sglist_cnt = csio->sglist_cnt;
593 		break;
594 	}
595 	case XPT_CONT_TARGET_IO: {
596 		struct ccb_scsiio *ctio;
597 
598 		ctio = &ccb->ctio;
599 		data_ptr = ctio->data_ptr;
600 		dxfer_len = ctio->dxfer_len;
601 		sglist_cnt = ctio->sglist_cnt;
602 		break;
603 	}
604 	case XPT_ATA_IO: {
605 		struct ccb_ataio *ataio;
606 
607 		ataio = &ccb->ataio;
608 		data_ptr = ataio->data_ptr;
609 		dxfer_len = ataio->dxfer_len;
610 		sglist_cnt = 0;
611 		break;
612 	}
613 	case XPT_NVME_IO:
614 	case XPT_NVME_ADMIN: {
615 		struct ccb_nvmeio *nvmeio;
616 
617 		nvmeio = &ccb->nvmeio;
618 		data_ptr = nvmeio->data_ptr;
619 		dxfer_len = nvmeio->dxfer_len;
620 		sglist_cnt = nvmeio->sglist_cnt;
621 		break;
622 	}
623 	default:
624 		panic("%s: Unsupported func code %d", __func__,
625 		    ccb_h->func_code);
626 	}
627 
628 	switch ((ccb_h->flags & CAM_DATA_MASK)) {
629 	case CAM_DATA_VADDR:
630 		return (memdesc_vaddr(data_ptr, dxfer_len));
631 	case CAM_DATA_PADDR:
632 		return (memdesc_paddr((vm_paddr_t)(uintptr_t)data_ptr,
633 		    dxfer_len));
634 	case CAM_DATA_SG:
635 		return (memdesc_vlist(data_ptr, sglist_cnt));
636 	case CAM_DATA_SG_PADDR:
637 		return (memdesc_plist(data_ptr, sglist_cnt));
638 	case CAM_DATA_BIO:
639 		return (memdesc_bio(data_ptr));
640 	default:
641 		panic("%s: flags 0x%X unimplemented", __func__, ccb_h->flags);
642 	}
643 }
644 
645 int
646 bus_dmamap_load_ccb(bus_dma_tag_t dmat, bus_dmamap_t map, union ccb *ccb,
647 		    bus_dmamap_callback_t *callback, void *callback_arg,
648 		    int flags)
649 {
650 	struct ccb_hdr *ccb_h;
651 	struct memdesc mem;
652 
653 	ccb_h = &ccb->ccb_h;
654 	if ((ccb_h->flags & CAM_DIR_MASK) == CAM_DIR_NONE) {
655 		callback(callback_arg, NULL, 0, 0);
656 		return (0);
657 	}
658 
659 	mem = memdesc_ccb(ccb);
660 	return (bus_dmamap_load_mem(dmat, map, &mem, callback, callback_arg,
661 	    flags));
662 }
663 #endif
664