1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause-FreeBSD 3 * 4 * Copyright (c) 2019 Michal Meloun <mmel@FreeBSD.org> 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 16 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 17 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 18 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 19 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 20 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 21 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 22 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 23 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 24 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 25 * SUCH DAMAGE. 26 */ 27 28 #include <sys/cdefs.h> 29 __FBSDID("$FreeBSD$"); 30 31 #include <sys/param.h> 32 #include <sys/systm.h> 33 #include <sys/bus.h> 34 #include <sys/gpio.h> 35 #include <sys/kernel.h> 36 #include <sys/module.h> 37 #include <sys/malloc.h> 38 #include <sys/rman.h> 39 40 #include <machine/bus.h> 41 42 #include <dev/extres/clk/clk.h> 43 #include <dev/extres/hwreset/hwreset.h> 44 #include <dev/extres/phy/phy_usb.h> 45 #include <dev/extres/regulator/regulator.h> 46 #include <dev/extres/syscon/syscon.h> 47 #include <dev/ofw/ofw_bus.h> 48 #include <dev/ofw/ofw_bus_subr.h> 49 50 #include <dev/extres/syscon/syscon.h> 51 #include <dev/fdt/simple_mfd.h> 52 #include "phynode_if.h" 53 #include "phynode_usb_if.h" 54 #include "syscon_if.h" 55 56 57 58 /* Phy registers */ 59 #define UOC_CON0 0x00 60 #define UOC_CON0_SIDDQ (1 << 13) 61 #define UOC_CON0_DISABLE (1 << 4) 62 #define UOC_CON0_COMMON_ON_N (1 << 0) 63 64 #define UOC_CON2 0x08 65 #define UOC_CON2_SOFT_CON_SEL (1 << 2) 66 67 #define UOC_CON3 0x0c 68 69 70 #define WR4(_sc, _r, _v) bus_write_4((_sc)->mem_res, (_r), (_v)) 71 #define RD4(_sc, _r) bus_read_4((_sc)->mem_res, (_r)) 72 73 74 static struct ofw_compat_data compat_data[] = { 75 {"rockchip,rk3288-usb-phy", 1}, 76 {NULL, 0}, 77 }; 78 79 struct rk_usbphy_softc { 80 device_t dev; 81 }; 82 83 struct rk_phynode_sc { 84 struct phynode_usb_sc usb_sc; 85 uint32_t base; 86 int mode; 87 clk_t clk; 88 hwreset_t hwreset; 89 regulator_t supply_vbus; 90 struct syscon *syscon; 91 }; 92 93 static int 94 rk_phynode_phy_enable(struct phynode *phy, bool enable) 95 { 96 struct rk_phynode_sc *sc; 97 int rv; 98 99 sc = phynode_get_softc(phy); 100 101 rv = SYSCON_MODIFY_4(sc->syscon, 102 sc->base + UOC_CON0, 103 UOC_CON0_SIDDQ << 16 | UOC_CON0_SIDDQ, 104 enable ? 0 : UOC_CON0_SIDDQ); 105 106 return (rv); 107 108 } 109 110 static int 111 rk_phynode_get_mode(struct phynode *phynode, int *mode) 112 { 113 struct rk_phynode_sc *sc; 114 115 sc = phynode_get_softc(phynode); 116 *mode = sc->mode; 117 return (0); 118 } 119 120 static int 121 rk_phynode_set_mode(struct phynode *phynode, int mode) 122 { 123 struct rk_phynode_sc *sc; 124 125 sc = phynode_get_softc(phynode); 126 sc->mode = mode; 127 128 return (0); 129 } 130 131 132 /* Phy controller class and methods. */ 133 static phynode_method_t rk_phynode_methods[] = { 134 PHYNODEUSBMETHOD(phynode_enable, rk_phynode_phy_enable), 135 PHYNODEMETHOD(phynode_usb_get_mode, rk_phynode_get_mode), 136 PHYNODEMETHOD(phynode_usb_set_mode, rk_phynode_set_mode), 137 PHYNODEUSBMETHOD_END 138 }; 139 DEFINE_CLASS_1(rk_phynode, rk_phynode_class, rk_phynode_methods, 140 sizeof(struct rk_phynode_sc), phynode_usb_class); 141 142 static int 143 rk_usbphy_init_phy(struct rk_usbphy_softc *sc, phandle_t node) 144 { 145 struct phynode *phynode; 146 struct phynode_init_def phy_init; 147 struct rk_phynode_sc *phy_sc; 148 int rv; 149 uint32_t base; 150 clk_t clk; 151 hwreset_t hwreset; 152 regulator_t supply_vbus; 153 struct syscon *syscon; 154 155 clk = NULL; 156 hwreset = NULL; 157 supply_vbus = NULL; 158 159 rv = OF_getencprop(node, "reg", &base, sizeof(base)); 160 if (rv <= 0) { 161 device_printf(sc->dev, "cannot get 'reg' property.\n"); 162 goto fail; 163 } 164 165 /* FDT resources. All are optional. */ 166 rv = clk_get_by_ofw_name(sc->dev, node, "phyclk", &clk); 167 if (rv != 0 && rv != ENOENT) { 168 device_printf(sc->dev, "cannot get 'phyclk' clock.\n"); 169 goto fail; 170 } 171 rv = hwreset_get_by_ofw_name(sc->dev, node, "phy-reset", &hwreset); 172 if (rv != 0 && rv != ENOENT) { 173 device_printf(sc->dev, "Cannot get 'phy-reset' reset\n"); 174 goto fail; 175 } 176 rv = regulator_get_by_ofw_property(sc->dev, node, "vbus-supply", 177 &supply_vbus); 178 if (rv != 0 && rv != ENOENT) { 179 device_printf(sc->dev, "Cannot get 'vbus' regulator.\n"); 180 goto fail; 181 } 182 183 rv = SYSCON_GET_HANDLE(sc->dev, &syscon); 184 if (rv != 0) { 185 device_printf(sc->dev, "Cannot get parent syscon\n"); 186 goto fail; 187 } 188 189 /* Init HW resources */ 190 if (hwreset != NULL) { 191 rv = hwreset_assert(hwreset); 192 if (rv != 0) { 193 device_printf(sc->dev, "Cannot assert reset\n"); 194 goto fail; 195 } 196 } 197 if (clk != NULL) { 198 rv = clk_enable(clk); 199 if (rv != 0) { 200 device_printf(sc->dev, 201 "Cannot enable 'phyclk' clock.\n"); 202 goto fail; 203 } 204 } 205 206 if (hwreset != NULL) { 207 rv = hwreset_deassert(hwreset); 208 if (rv != 0) { 209 device_printf(sc->dev, "Cannot deassert reset\n"); 210 goto fail; 211 } 212 } 213 214 /* Create and register phy. */ 215 bzero(&phy_init, sizeof(phy_init)); 216 phy_init.id = 1; 217 phy_init.ofw_node = node; 218 phynode = phynode_create(sc->dev, &rk_phynode_class, &phy_init); 219 if (phynode == NULL) { 220 device_printf(sc->dev, "Cannot create phy.\n"); 221 return (ENXIO); 222 } 223 224 phy_sc = phynode_get_softc(phynode); 225 phy_sc->base = base; 226 phy_sc->clk = clk; 227 phy_sc->hwreset = hwreset; 228 phy_sc->supply_vbus = supply_vbus; 229 phy_sc->syscon = syscon; 230 if (phynode_register(phynode) == NULL) { 231 device_printf(sc->dev, "Cannot register phy.\n"); 232 return (ENXIO); 233 } 234 /* XXX It breaks boot */ 235 /* rk_phynode_phy_enable(phynode, 1); */ 236 return (0); 237 238 fail: 239 if (supply_vbus != NULL) 240 regulator_release(supply_vbus); 241 if (clk != NULL) 242 clk_release(clk); 243 if (hwreset != NULL) 244 hwreset_release(hwreset); 245 246 return (ENXIO); 247 } 248 249 static int 250 rk_usbphy_probe(device_t dev) 251 { 252 253 if (!ofw_bus_status_okay(dev)) 254 return (ENXIO); 255 256 if (ofw_bus_search_compatible(dev, compat_data)->ocd_data == 0) 257 return (ENXIO); 258 259 device_set_desc(dev, "RockChip USB Phy"); 260 return (BUS_PROBE_DEFAULT); 261 } 262 263 static int 264 rk_usbphy_attach(device_t dev) 265 { 266 struct rk_usbphy_softc *sc; 267 phandle_t node, child; 268 int rv; 269 270 sc = device_get_softc(dev); 271 sc->dev = dev; 272 node = ofw_bus_get_node(sc->dev); 273 274 /* Attach child devices */ 275 for (child = OF_child(node); child > 0; child = OF_peer(child)) { 276 rv = rk_usbphy_init_phy(sc, child); 277 if (rv != 0) 278 goto fail; 279 } 280 return (bus_generic_attach(dev)); 281 282 fail: 283 return (ENXIO); 284 } 285 286 static int 287 rk_usbphy_detach(device_t dev) 288 { 289 struct rk_usbphy_softc *sc; 290 sc = device_get_softc(dev); 291 292 return (0); 293 } 294 295 static device_method_t rk_usbphy_methods[] = { 296 /* Device interface */ 297 DEVMETHOD(device_probe, rk_usbphy_probe), 298 DEVMETHOD(device_attach, rk_usbphy_attach), 299 DEVMETHOD(device_detach, rk_usbphy_detach), 300 DEVMETHOD_END 301 }; 302 303 static devclass_t rk_usbphy_devclass; 304 static DEFINE_CLASS_0(rk_usbphy, rk_usbphy_driver, rk_usbphy_methods, 305 sizeof(struct rk_usbphy_softc)); 306 EARLY_DRIVER_MODULE(rk_usbphy, simplebus, rk_usbphy_driver, 307 rk_usbphy_devclass, NULL, NULL, BUS_PASS_TIMER + BUS_PASS_ORDER_LAST); 308