1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause 3 * 4 * Copyright (c) 2019 Ganbold Tsagaankhuu <ganbold@FreeBSD.org> 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 19 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 20 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 22 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 26 * SUCH DAMAGE. 27 */ 28 29 /* 30 * Rockchip RK3399 eMMC PHY 31 */ 32 33 #include <sys/param.h> 34 #include <sys/systm.h> 35 #include <sys/bus.h> 36 #include <sys/rman.h> 37 #include <sys/kernel.h> 38 #include <sys/module.h> 39 #include <sys/gpio.h> 40 #include <machine/bus.h> 41 42 #include <dev/fdt/fdt_common.h> 43 #include <dev/ofw/ofw_bus.h> 44 #include <dev/ofw/ofw_bus_subr.h> 45 46 #include <dev/extres/clk/clk.h> 47 #include <dev/extres/syscon/syscon.h> 48 #include <dev/extres/phy/phy.h> 49 50 #include "syscon_if.h" 51 52 #define GRF_EMMCPHY_BASE 0xf780 53 #define GRF_EMMCPHY_CON0 (GRF_EMMCPHY_BASE + 0x00) 54 #define PHYCTRL_FRQSEL (1 << 13) | (1 << 12) 55 #define PHYCTRL_FRQSEL_200M 0 56 #define PHYCTRL_FRQSEL_50M 1 57 #define PHYCTRL_FRQSEL_100M 2 58 #define PHYCTRL_FRQSEL_150M 3 59 #define PHYCTRL_OTAPDLYENA (1 << 11) 60 #define PHYCTRL_OTAPDLYSEL (1 << 10) | (1 << 9) | (1 << 8) | (1 << 7) 61 #define PHYCTRL_ITAPCHGWIN (1 << 6) 62 #define PHYCTRL_ITAPDLYSEL (1 << 5) | (1 << 4) | (1 << 3) | (1 << 2) | \ 63 (1 << 1) 64 #define PHYCTRL_ITAPDLYENA (1 << 0) 65 #define GRF_EMMCPHY_CON1 (GRF_EMMCPHY_BASE + 0x04) 66 #define PHYCTRL_CLKBUFSEL (1 << 8) | (1 << 7) | (1 << 6) 67 #define PHYCTRL_SELDLYTXCLK (1 << 5) 68 #define PHYCTRL_SELDLYRXCLK (1 << 4) 69 #define PHYCTRL_STRBSEL 0xf 70 #define GRF_EMMCPHY_CON2 (GRF_EMMCPHY_BASE + 0x08) 71 #define PHYCTRL_REN_STRB (1 << 9) 72 #define PHYCTRL_REN_CMD (1 << 8) 73 #define PHYCTRL_REN_DAT 0xff 74 #define GRF_EMMCPHY_CON3 (GRF_EMMCPHY_BASE + 0x0c) 75 #define PHYCTRL_PU_STRB (1 << 9) 76 #define PHYCTRL_PU_CMD (1 << 8) 77 #define PHYCTRL_PU_DAT 0xff 78 #define GRF_EMMCPHY_CON4 (GRF_EMMCPHY_BASE + 0x10) 79 #define PHYCTRL_OD_RELEASE_CMD (1 << 9) 80 #define PHYCTRL_OD_RELEASE_STRB (1 << 8) 81 #define PHYCTRL_OD_RELEASE_DAT 0xff 82 #define GRF_EMMCPHY_CON5 (GRF_EMMCPHY_BASE + 0x14) 83 #define PHYCTRL_ODEN_STRB (1 << 9) 84 #define PHYCTRL_ODEN_CMD (1 << 8) 85 #define PHYCTRL_ODEN_DAT 0xff 86 #define GRF_EMMCPHY_CON6 (GRF_EMMCPHY_BASE + 0x18) 87 #define PHYCTRL_DLL_TRM_ICP (1 << 12) | (1 << 11) | (1 << 10) | (1 << 9) 88 #define PHYCTRL_EN_RTRIM (1 << 8) 89 #define PHYCTRL_RETRIM (1 << 7) 90 #define PHYCTRL_DR_TY (1 << 6) | (1 << 5) | (1 << 4) 91 #define PHYCTRL_RETENB (1 << 3) 92 #define PHYCTRL_RETEN (1 << 2) 93 #define PHYCTRL_ENDLL (1 << 1) 94 #define PHYCTRL_PDB (1 << 0) 95 #define GRF_EMMCPHY_STATUS (GRF_EMMCPHY_BASE + 0x20) 96 #define PHYCTRL_CALDONE (1 << 6) 97 #define PHYCTRL_DLLRDY (1 << 5) 98 #define PHYCTRL_RTRIM (1 << 4) | (1 << 3) | (1 << 2) | (1 << 1) 99 #define PHYCTRL_EXR_NINST (1 << 0) 100 101 static struct ofw_compat_data compat_data[] = { 102 { "rockchip,rk3399-emmc-phy", 1 }, 103 { NULL, 0 } 104 }; 105 106 struct rk_emmcphy_softc { 107 struct syscon *syscon; 108 struct rk_emmcphy_conf *phy_conf; 109 clk_t clk; 110 }; 111 112 #define LOWEST_SET_BIT(mask) ((((mask) - 1) & (mask)) ^ (mask)) 113 #define SHIFTIN(x, mask) ((x) * LOWEST_SET_BIT(mask)) 114 115 /* Phy class and methods. */ 116 static int rk_emmcphy_enable(struct phynode *phynode, bool enable); 117 static phynode_method_t rk_emmcphy_phynode_methods[] = { 118 PHYNODEMETHOD(phynode_enable, rk_emmcphy_enable), 119 PHYNODEMETHOD_END 120 }; 121 122 DEFINE_CLASS_1(rk_emmcphy_phynode, rk_emmcphy_phynode_class, 123 rk_emmcphy_phynode_methods, 0, phynode_class); 124 125 static int 126 rk_emmcphy_enable(struct phynode *phynode, bool enable) 127 { 128 struct rk_emmcphy_softc *sc; 129 device_t dev; 130 intptr_t phy; 131 uint64_t rate, frqsel; 132 uint32_t mask, val; 133 int error; 134 135 dev = phynode_get_device(phynode); 136 phy = phynode_get_id(phynode); 137 sc = device_get_softc(dev); 138 139 if (bootverbose) 140 device_printf(dev, "Phy id: %ld\n", phy); 141 142 if (phy != 0) { 143 device_printf(dev, "Unknown phy: %ld\n", phy); 144 return (ERANGE); 145 } 146 if (enable) { 147 /* Drive strength */ 148 mask = PHYCTRL_DR_TY; 149 val = SHIFTIN(0, PHYCTRL_DR_TY); 150 SYSCON_WRITE_4(sc->syscon, GRF_EMMCPHY_CON6, 151 (mask << 16) | val); 152 153 /* Enable output tap delay */ 154 mask = PHYCTRL_OTAPDLYENA | PHYCTRL_OTAPDLYSEL; 155 val = PHYCTRL_OTAPDLYENA | SHIFTIN(4, PHYCTRL_OTAPDLYSEL); 156 SYSCON_WRITE_4(sc->syscon, GRF_EMMCPHY_CON0, 157 (mask << 16) | val); 158 } 159 160 /* Power down PHY and disable DLL before making changes */ 161 mask = PHYCTRL_ENDLL | PHYCTRL_PDB; 162 val = 0; 163 SYSCON_WRITE_4(sc->syscon, GRF_EMMCPHY_CON6, (mask << 16) | val); 164 165 if (enable == false) 166 return (0); 167 168 sc->phy_conf = (struct rk_emmcphy_conf *)ofw_bus_search_compatible(dev, 169 compat_data)->ocd_data; 170 171 /* Get clock */ 172 error = clk_get_by_ofw_name(dev, 0, "emmcclk", &sc->clk); 173 if (error != 0) { 174 device_printf(dev, "cannot get emmcclk clock, continue\n"); 175 sc->clk = NULL; 176 } else 177 device_printf(dev, "got emmcclk clock\n"); 178 179 if (sc->clk) { 180 error = clk_get_freq(sc->clk, &rate); 181 if (error != 0) { 182 device_printf(dev, "cannot get clock frequency\n"); 183 return (ENXIO); 184 } 185 } else 186 rate = 0; 187 188 if (rate != 0) { 189 if (rate < 75000000) 190 frqsel = PHYCTRL_FRQSEL_50M; 191 else if (rate < 125000000) 192 frqsel = PHYCTRL_FRQSEL_100M; 193 else if (rate < 175000000) 194 frqsel = PHYCTRL_FRQSEL_150M; 195 else 196 frqsel = PHYCTRL_FRQSEL_200M; 197 } else 198 frqsel = PHYCTRL_FRQSEL_200M; 199 200 DELAY(3); 201 202 /* Power up PHY */ 203 mask = PHYCTRL_PDB; 204 val = PHYCTRL_PDB; 205 SYSCON_WRITE_4(sc->syscon, GRF_EMMCPHY_CON6, (mask << 16) | val); 206 207 /* Wait for calibration */ 208 DELAY(10); 209 val = SYSCON_READ_4(sc->syscon, GRF_EMMCPHY_STATUS); 210 if ((val & PHYCTRL_CALDONE) == 0) { 211 device_printf(dev, "PHY calibration did not complete\n"); 212 return (ENXIO); 213 } 214 215 /* Set DLL frequency */ 216 mask = PHYCTRL_FRQSEL; 217 val = SHIFTIN(frqsel, PHYCTRL_FRQSEL); 218 SYSCON_WRITE_4(sc->syscon, GRF_EMMCPHY_CON0, (mask << 16) | val); 219 220 /* Enable DLL */ 221 mask = PHYCTRL_ENDLL; 222 val = PHYCTRL_ENDLL; 223 SYSCON_WRITE_4(sc->syscon, GRF_EMMCPHY_CON6, (mask << 16) | val); 224 225 if (rate != 0) { 226 /* 227 * Rockchip RK3399 TRM V1.3 Part2.pdf says in page 698: 228 * After the DLL control loop reaches steady state a DLL 229 * ready signal is generated by the DLL circuits 230 * 'phyctrl_dllrdy'. 231 * The time from 'phyctrl_endll' to DLL ready signal 232 * 'phyctrl_dllrdy' varies with the clock frequency. 233 * At 200MHz clock frequency the DLL ready delay is 2.56us, 234 * at 100MHz clock frequency the DLL ready delay is 5.112us and 235 * at 50 MHz clock frequency the DLL ready delay is 10.231us. 236 * We could use safe values for wait, 12us, 8us, 6us and 4us 237 * respectively. 238 * However due to some unknown reason it is not working and 239 * DLL seems to take extra long time to lock. 240 * So we will use more safe value 50ms here. 241 */ 242 243 /* Wait for DLL ready */ 244 DELAY(50000); 245 val = SYSCON_READ_4(sc->syscon, GRF_EMMCPHY_STATUS); 246 if ((val & PHYCTRL_DLLRDY) == 0) { 247 device_printf(dev, "DLL loop failed to lock\n"); 248 return (ENXIO); 249 } 250 } 251 252 return (0); 253 } 254 255 static int 256 rk_emmcphy_probe(device_t dev) 257 { 258 259 if (!ofw_bus_status_okay(dev)) 260 return (ENXIO); 261 262 if (ofw_bus_search_compatible(dev, compat_data)->ocd_data == 0) 263 return (ENXIO); 264 265 device_set_desc(dev, "Rockchip RK3399 eMMC PHY"); 266 return (BUS_PROBE_DEFAULT); 267 } 268 269 static int 270 rk_emmcphy_attach(device_t dev) 271 { 272 struct phynode_init_def phy_init; 273 struct phynode *phynode; 274 struct rk_emmcphy_softc *sc; 275 phandle_t node; 276 phandle_t xnode; 277 pcell_t handle; 278 intptr_t phy; 279 280 sc = device_get_softc(dev); 281 node = ofw_bus_get_node(dev); 282 283 if (OF_getencprop(node, "clocks", (void *)&handle, 284 sizeof(handle)) <= 0) { 285 device_printf(dev, "cannot get clocks handle\n"); 286 return (ENXIO); 287 } 288 xnode = OF_node_from_xref(handle); 289 if (OF_hasprop(xnode, "arasan,soc-ctl-syscon") && 290 syscon_get_by_ofw_property(dev, xnode, 291 "arasan,soc-ctl-syscon", &sc->syscon) != 0) { 292 device_printf(dev, "cannot get grf driver handle\n"); 293 return (ENXIO); 294 } 295 296 if (sc->syscon == NULL) { 297 device_printf(dev, "failed to get syscon\n"); 298 return (ENXIO); 299 } 300 301 /* Create and register phy */ 302 bzero(&phy_init, sizeof(phy_init)); 303 phy_init.id = 0; 304 phy_init.ofw_node = ofw_bus_get_node(dev); 305 phynode = phynode_create(dev, &rk_emmcphy_phynode_class, &phy_init); 306 if (phynode == NULL) { 307 device_printf(dev, "failed to create eMMC PHY\n"); 308 return (ENXIO); 309 } 310 if (phynode_register(phynode) == NULL) { 311 device_printf(dev, "failed to register eMMC PHY\n"); 312 return (ENXIO); 313 } 314 if (bootverbose) { 315 phy = phynode_get_id(phynode); 316 device_printf(dev, "Attached phy id: %ld\n", phy); 317 } 318 return (0); 319 } 320 321 static device_method_t rk_emmcphy_methods[] = { 322 /* Device interface */ 323 DEVMETHOD(device_probe, rk_emmcphy_probe), 324 DEVMETHOD(device_attach, rk_emmcphy_attach), 325 326 DEVMETHOD_END 327 }; 328 329 static driver_t rk_emmcphy_driver = { 330 "rk_emmcphy", 331 rk_emmcphy_methods, 332 sizeof(struct rk_emmcphy_softc) 333 }; 334 335 EARLY_DRIVER_MODULE(rk_emmcphy, simplebus, rk_emmcphy_driver, 0, 0, 336 BUS_PASS_SUPPORTDEV + BUS_PASS_ORDER_MIDDLE); 337 MODULE_VERSION(rk_emmcphy, 1); 338