1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause 3 * 4 * Copyright 2020 Michal Meloun <mmel@FreeBSD.org> 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 16 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 17 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 18 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 19 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 20 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 21 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 22 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 23 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 24 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 25 * SUCH DAMAGE. 26 */ 27 28 #include <sys/cdefs.h> 29 __FBSDID("$FreeBSD$"); 30 31 #include <sys/param.h> 32 #include <sys/systm.h> 33 #include <sys/bus.h> 34 #include <sys/lock.h> 35 #include <sys/mutex.h> 36 #include <sys/rman.h> 37 38 #include <machine/bus.h> 39 40 #include <dev/extres/clk/clk_div.h> 41 #include <dev/extres/clk/clk_fixed.h> 42 #include <dev/extres/clk/clk_gate.h> 43 #include <dev/extres/clk/clk_mux.h> 44 45 #include <dt-bindings/clock/tegra210-car.h> 46 #include "tegra210_car.h" 47 48 #if 0 49 #define dprintf(...) printf(__VA_ARGS__) 50 #else 51 #define dprintf(...) 52 #endif 53 54 /* All PLLs. */ 55 enum pll_type { 56 PLL_M, 57 PLL_MB, 58 PLL_X, 59 PLL_C, 60 PLL_C2, 61 PLL_C3, 62 PLL_C4, 63 PLL_P, 64 PLL_A, 65 PLL_A1, 66 PLL_U, 67 PLL_D, 68 PLL_D2, 69 PLL_DP, 70 PLL_E, 71 PLL_REFE}; 72 /* Flags for PLLs */ 73 74 #define PLL_FLAG_PDIV_POWER2 0x01 /* P Divider is 2^n */ 75 #define PLL_FLAG_VCO_OUT 0x02 /* Output VCO directly */ 76 #define PLL_FLAG_HAVE_SDM 0x04 /* Have SDM implemented */ 77 #define PLL_FLAG_HAVE_SDA 0x04 /* Have SDA implemented */ 78 79 /* Common base register bits. */ 80 #define PLL_BASE_BYPASS (1U << 31) 81 #define PLL_BASE_ENABLE (1 << 30) 82 #define PLL_BASE_REFDISABLE (1 << 29) 83 #define PLL_BASE_LOCK (1 << 27) 84 85 #define PLLREFE_MISC_LOCK (1 << 27) 86 87 #define PLL_MISC_LOCK_ENABLE (1 << 18) 88 #define PLLM_LOCK_ENABLE (1 << 4) 89 #define PLLMB_LOCK_ENABLE (1 << 16) 90 #define PLLC_LOCK_ENABLE (1 << 24) 91 #define PLLC4_LOCK_ENABLE (1 << 30) 92 #define PLLA_LOCK_ENABLE (1 << 28) 93 #define PLLD2_LOCK_ENABLE (1 << 30) 94 #define PLLU_LOCK_ENABLE (1 << 29) 95 #define PLLREFE_LOCK_ENABLE (1 << 30) 96 #define PLLPD_LOCK_ENABLE (1 << 30) 97 #define PLLE_LOCK_ENABLE (1 << 9) 98 99 #define PLLM_IDDQ_BIT 5 100 #define PLLMB_IDDQ_BIT 17 101 #define PLLC_IDDQ_BIT 27 102 #define PLLC4_IDDQ_BIT 18 103 #define PLLP_IDDQ_BIT 3 104 #define PLLA_IDDQ_BIT 25 105 #define PLLA1_IDDQ_BIT 27 106 #define PLLU_IDDQ_BIT 31 107 #define PLLD_IDDQ_BIT 20 108 #define PLLD2_IDDQ_BIT 18 109 #define PLLX_IDDQ_BIT 3 110 #define PLLREFE_IDDQ_BIT 24 111 #define PLLDP_IDDQ_BIT 18 112 113 114 #define PLL_LOCK_TIMEOUT 5000 115 116 /* Post divider <-> register value mapping. */ 117 struct pdiv_table { 118 uint32_t divider; /* real divider */ 119 uint32_t value; /* register value */ 120 }; 121 122 /* Bits definition of M, N and P fields. */ 123 struct mnp_bits { 124 uint32_t m_width; 125 uint32_t n_width; 126 uint32_t p_width; 127 uint32_t m_shift; 128 uint32_t n_shift; 129 uint32_t p_shift; 130 }; 131 132 struct clk_pll_def { 133 struct clknode_init_def clkdef; 134 enum pll_type type; 135 uint32_t base_reg; 136 uint32_t misc_reg; 137 uint32_t lock_enable; 138 uint32_t iddq_reg; 139 uint32_t iddq_mask; 140 uint32_t flags; 141 struct pdiv_table *pdiv_table; 142 struct mnp_bits mnp_bits; 143 }; 144 145 #define PLIST(x) static const char *x[] 146 147 #define PLL(_id, cname, pname) \ 148 .clkdef.id = _id, \ 149 .clkdef.name = cname, \ 150 .clkdef.parent_names = (const char *[]){pname}, \ 151 .clkdef.parent_cnt = 1, \ 152 .clkdef.flags = CLK_NODE_STATIC_STRINGS 153 154 /* multiplexer for pll sources. */ 155 #define MUX(_id, cname, plists, o, s, w) \ 156 { \ 157 .clkdef.id = _id, \ 158 .clkdef.name = cname, \ 159 .clkdef.parent_names = plists, \ 160 .clkdef.parent_cnt = nitems(plists), \ 161 .clkdef.flags = CLK_NODE_STATIC_STRINGS, \ 162 .offset = o, \ 163 .shift = s, \ 164 .width = w, \ 165 } 166 167 /* Fractional divider (7.1) for PLL branch. */ 168 #define DIV7_1(_id, cname, plist, o, s) \ 169 { \ 170 .clkdef.id = _id, \ 171 .clkdef.name = cname, \ 172 .clkdef.parent_names = (const char *[]){plist}, \ 173 .clkdef.parent_cnt = 1, \ 174 .clkdef.flags = CLK_NODE_STATIC_STRINGS, \ 175 .offset = o, \ 176 .i_shift = (s) + 1, \ 177 .i_width = 7, \ 178 .f_shift = s, \ 179 .f_width = 1, \ 180 } 181 182 /* P divider (2^n). for PLL branch. */ 183 #define DIV5_E(_id, cname, plist, o, s) \ 184 { \ 185 .clkdef.id = _id, \ 186 .clkdef.name = cname, \ 187 .clkdef.parent_names = (const char *[]){plist}, \ 188 .clkdef.parent_cnt = 1, \ 189 .clkdef.flags = CLK_NODE_STATIC_STRINGS, \ 190 .offset = o, \ 191 .i_shift = s, \ 192 .i_width = 5, \ 193 } 194 195 /* P divider (2^n). for PLL branch. */ 196 #define DIV_TB(_id, cname, plist, o, s, n, table) \ 197 { \ 198 .clkdef.id = _id, \ 199 .clkdef.name = cname, \ 200 .clkdef.parent_names = (const char *[]){plist}, \ 201 .clkdef.parent_cnt = 1, \ 202 .clkdef.flags = CLK_NODE_STATIC_STRINGS, \ 203 .div_flags = CLK_DIV_WITH_TABLE | CLK_DIV_ZERO_BASED, \ 204 .offset = o, \ 205 .i_shift = s, \ 206 .i_width = n, \ 207 .div_table = table, \ 208 } 209 210 /* Standard gate. */ 211 #define GATE(_id, cname, plist, o, s) \ 212 { \ 213 .clkdef.id = _id, \ 214 .clkdef.name = cname, \ 215 .clkdef.parent_names = (const char *[]){plist}, \ 216 .clkdef.parent_cnt = 1, \ 217 .clkdef.flags = CLK_NODE_STATIC_STRINGS, \ 218 .offset = o, \ 219 .shift = s, \ 220 .mask = 1, \ 221 .on_value = 1, \ 222 .off_value = 0, \ 223 } 224 /* Gate for PLL branch. */ 225 #define GATE_PLL(_id, cname, plist, o, s) \ 226 { \ 227 .clkdef.id = _id, \ 228 .clkdef.name = cname, \ 229 .clkdef.parent_names = (const char *[]){plist}, \ 230 .clkdef.parent_cnt = 1, \ 231 .clkdef.flags = CLK_NODE_STATIC_STRINGS, \ 232 .offset = o, \ 233 .shift = s, \ 234 .mask = 3, \ 235 .on_value = 3, \ 236 .off_value = 0, \ 237 } 238 239 /* Fixed rate multipier/divider. */ 240 #define FACT(_id, cname, pname, _mult, _div) \ 241 { \ 242 .clkdef.id = _id, \ 243 .clkdef.name = cname, \ 244 .clkdef.parent_names = (const char *[]){pname}, \ 245 .clkdef.parent_cnt = 1, \ 246 .clkdef.flags = CLK_NODE_STATIC_STRINGS, \ 247 .mult = _mult, \ 248 .div = _div, \ 249 } 250 251 static struct pdiv_table qlin_map[] = { 252 { 1, 0}, 253 { 2, 1}, 254 { 3, 2}, 255 { 4, 3}, 256 { 5, 4}, 257 { 6, 5}, 258 { 8, 6}, 259 { 9, 7}, 260 {10, 8}, 261 {12, 9}, 262 {15, 10}, 263 {16, 11}, 264 {18, 12}, 265 {20, 13}, 266 {24, 14}, 267 {30, 15}, 268 {32, 16}, 269 { 0, 0}, 270 }; 271 272 static struct clk_pll_def pll_clks[] = { 273 /* PLLM: 880 MHz Clock source for EMC 2x clock */ 274 { 275 PLL(TEGRA210_CLK_PLL_M, "pllM_out0", "osc"), 276 .type = PLL_M, 277 .base_reg = PLLM_BASE, 278 .misc_reg = PLLM_MISC2, 279 .lock_enable = PLLM_LOCK_ENABLE, 280 .iddq_reg = PLLM_MISC2, 281 .iddq_mask = 1 << PLLM_IDDQ_BIT, 282 .pdiv_table = qlin_map, 283 .mnp_bits = {8, 8, 5, 0, 8, 20}, 284 }, 285 /* PLLMB: 880 MHz Clock source for EMC 2x clock */ 286 { 287 PLL(TEGRA210_CLK_PLL_M, "pllMB_out0", "osc"), 288 .type = PLL_MB, 289 .base_reg = PLLMB_BASE, 290 .misc_reg = PLLMB_MISC1, 291 .lock_enable = PLLMB_LOCK_ENABLE, 292 .iddq_reg = PLLMB_MISC1, 293 .iddq_mask = 1 << PLLMB_IDDQ_BIT, 294 .pdiv_table = qlin_map, 295 .mnp_bits = {8, 8, 5, 0, 8, 20}, 296 }, 297 /* PLLX: 1GHz Clock source for the fast CPU cluster and the shadow CPU */ 298 { 299 PLL(TEGRA210_CLK_PLL_X, "pllX_out0", "osc_div_clk"), 300 .type = PLL_X, 301 .base_reg = PLLX_BASE, 302 .misc_reg = PLLX_MISC, 303 .lock_enable = PLL_MISC_LOCK_ENABLE, 304 .iddq_reg = PLLX_MISC_3, 305 .iddq_mask = 1 << PLLX_IDDQ_BIT, 306 .pdiv_table = qlin_map, 307 .mnp_bits = {8, 8, 5, 0, 8, 20}, 308 }, 309 /* PLLC: 510 MHz Clock source for camera use */ 310 { 311 PLL(TEGRA210_CLK_PLL_C, "pllC_out0", "osc_div_clk"), 312 .type = PLL_C, 313 .base_reg = PLLC_BASE, 314 .misc_reg = PLLC_MISC_0, 315 .iddq_reg = PLLC_MISC_1, 316 .iddq_mask = 1 << PLLC_IDDQ_BIT, 317 .pdiv_table = qlin_map, 318 .mnp_bits = {8, 8, 5, 0, 10, 20}, 319 }, 320 /* PLLC2: 510 MHz Clock source for SE, VIC, TSECB, NVJPG scaling */ 321 { 322 PLL(TEGRA210_CLK_PLL_C2, "pllC2_out0", "osc_div_clk"), 323 .type = PLL_C2, 324 .base_reg = PLLC2_BASE, 325 .misc_reg = PLLC2_MISC_0, 326 .iddq_reg = PLLC2_MISC_1, 327 .iddq_mask = 1 << PLLC_IDDQ_BIT, 328 .pdiv_table = qlin_map, 329 .mnp_bits = {8, 8, 5, 0, 10, 20}, 330 }, 331 /* PLLC3: 510 MHz Clock source for NVENC, NVDEC scaling */ 332 { 333 PLL(TEGRA210_CLK_PLL_C3, "pllC3_out0", "osc_div_clk"), 334 .type = PLL_C3, 335 .base_reg = PLLC3_BASE, 336 .misc_reg = PLLC3_MISC_0, 337 .lock_enable = PLL_MISC_LOCK_ENABLE, 338 .iddq_reg = PLLC3_MISC_1, 339 .iddq_mask = 1 << PLLC_IDDQ_BIT, 340 .mnp_bits = {8, 8, 5, 0, 10, 20}, 341 }, 342 /* PLLC4: 600 MHz Clock source for SD/eMMC ans system busses */ 343 { 344 PLL(TEGRA210_CLK_PLL_C4, "pllC4", "pllC4_src"), 345 .type = PLL_C4, 346 .flags = PLL_FLAG_VCO_OUT, 347 .base_reg = PLLC4_BASE, 348 .misc_reg = PLLC4_MISC, 349 .lock_enable = PLLC4_LOCK_ENABLE, 350 .iddq_reg = PLLC4_BASE, 351 .iddq_mask = 1 << PLLC4_IDDQ_BIT, 352 .pdiv_table = qlin_map, 353 .mnp_bits = {8, 8, 5, 0, 8, 19}, 354 }, 355 /* PLLP: 408 MHz Clock source for most peripherals */ 356 { 357 /* 358 * VCO is directly exposed as pllP_out0, P div is used for 359 * pllP_out2 360 */ 361 PLL(TEGRA210_CLK_PLL_P, "pllP_out0", "osc_div_clk"), 362 .type = PLL_P, 363 .flags = PLL_FLAG_VCO_OUT, 364 .base_reg = PLLP_BASE, 365 .misc_reg = PLLP_MISC, 366 .lock_enable = PLL_MISC_LOCK_ENABLE, 367 .iddq_reg = PLLP_MISC, 368 .iddq_mask = 1 << PLLA_IDDQ_BIT, 369 .mnp_bits = {8, 8, 5, 0, 10, 20}, 370 }, 371 /* PLLA: Audio clock for precise codec sampling */ 372 { 373 PLL(TEGRA210_CLK_PLL_A, "pllA", "osc_div_clk"), 374 .type = PLL_A, 375 .base_reg = PLLA_BASE, 376 .misc_reg = PLLA_MISC, 377 .lock_enable = PLLA_LOCK_ENABLE, 378 .iddq_reg = PLLA_BASE, 379 .iddq_mask = 1 << PLLA_IDDQ_BIT, 380 .pdiv_table = qlin_map, 381 .mnp_bits = {8, 8, 5, 0, 8, 20}, 382 }, 383 /* PLLA1: Audio clock for ADSP */ 384 { 385 PLL(TEGRA210_CLK_PLL_A1, "pllA1_out0", "osc_div_clk"), 386 .type = PLL_A1, 387 .base_reg = PLLA1_BASE, 388 .misc_reg = PLLA1_MISC_1, 389 .iddq_reg = PLLA1_MISC_1, 390 .iddq_mask = 1 << PLLA_IDDQ_BIT, 391 .pdiv_table = qlin_map, 392 .mnp_bits = {8, 8, 5, 0, 8, 20}, 393 }, 394 /* PLLU: 480 MHz Clock source for USB PHY, provides 12/60/480 MHz */ 395 { 396 PLL(TEGRA210_CLK_PLL_U, "pllU", "osc_div_clk"), 397 .type = PLL_U, 398 .flags = PLL_FLAG_VCO_OUT | PLL_FLAG_HAVE_SDA, 399 .base_reg = PLLU_BASE, 400 .misc_reg = PLLU_MISC, 401 .lock_enable = PLLU_LOCK_ENABLE, 402 .iddq_reg = PLLU_MISC, 403 .iddq_mask = 1 << PLLU_IDDQ_BIT, 404 .pdiv_table = qlin_map, 405 .mnp_bits = {8, 8, 5, 0, 8, 16}, 406 }, 407 /* PLLD: 594 MHz Clock sources for the DSI and display subsystem */ 408 { 409 PLL(TEGRA210_CLK_PLL_D, "pllD_out", "osc_div_clk"), 410 .type = PLL_D, 411 .flags = PLL_FLAG_PDIV_POWER2, 412 .base_reg = PLLD_BASE, 413 .misc_reg = PLLD_MISC, 414 .lock_enable = PLL_MISC_LOCK_ENABLE, 415 .iddq_reg = PLLA1_MISC_1, 416 .iddq_mask = 1 << PLLA_IDDQ_BIT, 417 .mnp_bits = {8, 8, 3, 0, 11, 20}, 418 }, 419 /* PLLD2: 594 MHz Clock sources for the DSI and display subsystem */ 420 { 421 PLL(TEGRA210_CLK_PLL_D2, "pllD2_out", "pllD2_src"), 422 .type = PLL_D2, 423 .flags = PLL_FLAG_HAVE_SDM, 424 .base_reg = PLLD2_BASE, 425 .misc_reg = PLLD2_MISC, 426 .lock_enable = PLLD2_LOCK_ENABLE, 427 .iddq_reg = PLLD2_BASE, 428 .iddq_mask = 1 << PLLD_IDDQ_BIT, 429 .pdiv_table = qlin_map, 430 .mnp_bits = {8, 8, 5, 0, 8, 19}, 431 }, 432 /* PLLREFE: 624 Mhz*/ 433 { 434 PLL(0, "pllREFE", "osc_div_clk"), 435 .type = PLL_REFE, 436 .flags = PLL_FLAG_VCO_OUT, 437 .base_reg = PLLREFE_BASE, 438 .misc_reg = PLLREFE_MISC, 439 .lock_enable = PLLREFE_LOCK_ENABLE, 440 .iddq_reg = PLLREFE_MISC, 441 .iddq_mask = 1 << PLLREFE_IDDQ_BIT, 442 .pdiv_table = qlin_map, 443 .mnp_bits = {8, 8, 5, 0, 8, 16}, 444 }, 445 /* PLLE: 100 MHz reference clock for PCIe/SATA/USB 3.0 (spread spectrum) */ 446 { 447 PLL(TEGRA210_CLK_PLL_E, "pllE_out0", "pllE_src"), 448 .type = PLL_E, 449 .base_reg = PLLE_BASE, 450 .misc_reg = PLLE_MISC, 451 .lock_enable = PLLE_LOCK_ENABLE, 452 .pdiv_table = qlin_map, 453 .mnp_bits = {8, 8, 5, 0, 8, 24}, 454 }, 455 /* PLLDP: 270 MHz Clock source fordisplay SOR (spread spectrum) */ 456 { 457 PLL(0, "pllDP_out0", "pllDP_src"), 458 .type = PLL_DP, 459 .flags = PLL_FLAG_HAVE_SDM, 460 .base_reg = PLLDP_BASE, 461 .misc_reg = PLLDP_MISC, 462 .lock_enable = PLLPD_LOCK_ENABLE, 463 .iddq_reg = PLLDP_BASE, 464 .iddq_mask = 1 << PLLDP_IDDQ_BIT, 465 .pdiv_table = qlin_map, 466 .mnp_bits = {8, 8, 5, 0, 8, 19}, 467 }, 468 }; 469 470 /* Fixed rate dividers. */ 471 static struct clk_fixed_def tegra210_pll_fdivs[] = { 472 FACT(0, "pllP_UD", "pllP_out0", 1, 1), 473 FACT(0, "pllC_UD", "pllC_out0", 1, 1), 474 FACT(0, "pllD_UD", "pllD_out0", 1, 1), 475 FACT(0, "pllM_UD", "pllM_out0", 1, 1), 476 FACT(0, "pllMB_UD", "pllMB_out0", 1, 1), 477 FACT(TEGRA210_CLK_PLL_D_OUT0, "pllD_out0", "pllD_out", 1, 2), 478 479 FACT(0, "pllC4_out1", "pllC4", 1, 3), 480 FACT(0, "pllC4_out2", "pllC4", 1, 5), 481 FACT(0, "pllD2_out0", "pllD2_out", 1, 2), 482 483 /* Aliases used in super mux. */ 484 FACT(0, "pllX_out0_alias", "pllX_out0", 1, 1), 485 FACT(0, "dfllCPU_out_alias", "dfllCPU_out", 1, 1), 486 }; 487 488 /* MUXes for PLL sources. */ 489 PLIST(mux_pll_srcs) = {"osc_div_clk", NULL, "pllP_out0", NULL}; /* FIXME */ 490 PLIST(mux_plle_src1) = {"osc_div_clk", "pllP_out0"}; 491 PLIST(mux_plle_src) = {"pllE_src1", "pllREFE_out0"}; 492 static struct clk_mux_def tegra210_pll_sources[] = { 493 /* Core clocks. */ 494 MUX(0, "pllD2_src", mux_pll_srcs, PLLD2_BASE, 25, 2), 495 MUX(0, "pllDP_src", mux_pll_srcs, PLLDP_BASE, 25, 2), 496 MUX(0, "pllC4_src", mux_pll_srcs, PLLC4_BASE, 25, 2), 497 MUX(0, "pllE_src1", mux_plle_src1, PLLE_AUX, 2, 1), 498 MUX(0, "pllE_src", mux_plle_src, PLLE_AUX, 28, 1), 499 }; 500 501 /* Gates for PLL branches. */ 502 static struct clk_gate_def tegra210_pll_gates[] = { 503 /* Core clocks. */ 504 GATE_PLL(0, "pllC_out1", "pllC_out1_div", PLLC_OUT, 0), 505 506 GATE_PLL(0, "pllP_out1", "pllP_out1_div", PLLP_OUTA, 0), 507 GATE_PLL(0, "pllP_out3", "pllP_out3_div", PLLP_OUTB, 0), 508 GATE_PLL(TEGRA210_CLK_PLL_P_OUT4, "pllP_out4", "pllP_out4_div", PLLP_OUTB, 16), 509 GATE_PLL(0, "pllP_out5", "pllP_out5_div", PLLP_OUTC, 16), 510 511 GATE_PLL(0, "pllU_out1", "pllU_out1_div", PLLU_OUTA, 0), 512 GATE_PLL(0, "pllU_out2", "pllU_out2_div", PLLU_OUTA, 16), 513 GATE(0, "pllU_480", "pllU", PLLU_BASE, 22), 514 GATE(0, "pllU_60", "pllU_out2", PLLU_BASE, 23), 515 GATE(0, "pllU_48", "pllU_out1", PLLU_BASE, 25), 516 517 GATE_PLL(0, "pllREFE_out1", "pllREFE_out1_div", PLLREFE_OUT, 0), 518 GATE_PLL(0, "pllC4_out3", "pllC4_out3_div", PLLC4_OUT, 0), 519 520 GATE_PLL(0, "pllA_out0", "pllA_out0_div", PLLA_OUT, 0), 521 }; 522 523 struct clk_div_table tegra210_pll_pdiv_tbl[] = { 524 /* value , divider */ 525 { 0, 1 }, 526 { 1, 2 }, 527 { 2, 3 }, 528 { 3, 4 }, 529 { 4, 5 }, 530 { 5, 6 }, 531 { 6, 8 }, 532 { 7, 10 }, 533 { 8, 12 }, 534 { 9, 16 }, 535 {10, 12 }, 536 {11, 16 }, 537 {12, 20 }, 538 {13, 24 }, 539 {14, 32 }, 540 { 0, 0 }, 541 }; 542 543 /* Dividers for PLL branches. */ 544 static struct clk_div_def tegra210_pll_divs[] = { 545 /* Core clocks. */ 546 DIV7_1(0, "pllC_out1_div", "pllC_out0", PLLC_OUT, 8), 547 548 DIV7_1(0, "pllP_out1_div", "pllP_out0", PLLP_OUTA, 8), 549 DIV_TB(0, "pllP_out2", "pllP_out0", PLLP_BASE, 20, 5, tegra210_pll_pdiv_tbl), 550 DIV7_1(0, "pllP_out3_div", "pllP_out0", PLLP_OUTB, 8), 551 DIV7_1(0, "pllP_out4_div", "pllP_out0", PLLP_OUTB, 24), 552 DIV7_1(0, "pllP_out5_div", "pllP_out0", PLLP_OUTC, 24), 553 554 DIV_TB(0, "pllU_out0", "pllU", PLLU_BASE, 16, 5, tegra210_pll_pdiv_tbl), 555 DIV7_1(0, "pllU_out1_div", "pllU_out0", PLLU_OUTA, 8), 556 DIV7_1(0, "pllU_out2_div", "pllU_out0", PLLU_OUTA, 24), 557 558 DIV_TB(0, "pllREFE_out0", "pllREFE", PLLREFE_BASE, 16, 5, tegra210_pll_pdiv_tbl), 559 DIV7_1(0, "pllREFE_out1_div", "pllREFE", PLLREFE_OUT, 8), 560 561 DIV_TB(TEGRA210_CLK_PLL_C4_OUT0, 562 "pllC4_out0", "pllC4", PLLC4_BASE, 19, 5, tegra210_pll_pdiv_tbl), 563 DIV7_1(0, "pllC4_out3_div", "pllC4_out0", PLLC4_OUT, 8), 564 565 DIV7_1(0, "pllA_out0_div", "pllA", PLLA_OUT, 8), 566 567 }; 568 569 static int tegra210_pll_init(struct clknode *clk, device_t dev); 570 static int tegra210_pll_set_gate(struct clknode *clk, bool enable); 571 static int tegra210_pll_get_gate(struct clknode *clk, bool *enabled); 572 static int tegra210_pll_recalc(struct clknode *clk, uint64_t *freq); 573 static int tegra210_pll_set_freq(struct clknode *clknode, uint64_t fin, 574 uint64_t *fout, int flags, int *stop); 575 struct pll_sc { 576 device_t clkdev; 577 enum pll_type type; 578 uint32_t base_reg; 579 uint32_t misc_reg; 580 uint32_t lock_enable; 581 uint32_t iddq_reg; 582 uint32_t iddq_mask; 583 uint32_t flags; 584 struct pdiv_table *pdiv_table; 585 struct mnp_bits mnp_bits; 586 }; 587 588 static clknode_method_t tegra210_pll_methods[] = { 589 /* Device interface */ 590 CLKNODEMETHOD(clknode_init, tegra210_pll_init), 591 CLKNODEMETHOD(clknode_set_gate, tegra210_pll_set_gate), 592 CLKNODEMETHOD(clknode_get_gate, tegra210_pll_get_gate), 593 CLKNODEMETHOD(clknode_recalc_freq, tegra210_pll_recalc), 594 CLKNODEMETHOD(clknode_set_freq, tegra210_pll_set_freq), 595 CLKNODEMETHOD_END 596 }; 597 DEFINE_CLASS_1(tegra210_pll, tegra210_pll_class, tegra210_pll_methods, 598 sizeof(struct pll_sc), clknode_class); 599 600 static int 601 pll_enable(struct pll_sc *sc) 602 { 603 uint32_t reg; 604 605 606 RD4(sc, sc->base_reg, ®); 607 if (sc->type != PLL_E) 608 reg &= ~PLL_BASE_BYPASS; 609 reg |= PLL_BASE_ENABLE; 610 WR4(sc, sc->base_reg, reg); 611 return (0); 612 } 613 614 static int 615 pll_disable(struct pll_sc *sc) 616 { 617 uint32_t reg; 618 619 RD4(sc, sc->base_reg, ®); 620 if (sc->type != PLL_E) 621 reg |= PLL_BASE_BYPASS; 622 reg &= ~PLL_BASE_ENABLE; 623 WR4(sc, sc->base_reg, reg); 624 return (0); 625 } 626 627 static uint32_t 628 pdiv_to_reg(struct pll_sc *sc, uint32_t p_div) 629 { 630 struct pdiv_table *tbl; 631 632 tbl = sc->pdiv_table; 633 if (tbl == NULL) { 634 if (sc->flags & PLL_FLAG_PDIV_POWER2) 635 return (ffs(p_div) - 1); 636 else 637 return (p_div); 638 } 639 640 while (tbl->divider != 0) { 641 if (p_div <= tbl->divider) 642 return (tbl->value); 643 tbl++; 644 } 645 return (0xFFFFFFFF); 646 } 647 648 static uint32_t 649 reg_to_pdiv(struct pll_sc *sc, uint32_t reg) 650 { 651 struct pdiv_table *tbl; 652 653 tbl = sc->pdiv_table; 654 if (tbl == NULL) { 655 if (sc->flags & PLL_FLAG_PDIV_POWER2) 656 return (1 << reg); 657 else 658 return (reg == 0 ? 1: reg); 659 } 660 while (tbl->divider) { 661 if (reg == tbl->value) 662 return (tbl->divider); 663 tbl++; 664 } 665 return (0); 666 } 667 668 static uint32_t 669 get_masked(uint32_t val, uint32_t shift, uint32_t width) 670 { 671 672 return ((val >> shift) & ((1 << width) - 1)); 673 } 674 675 static uint32_t 676 set_masked(uint32_t val, uint32_t v, uint32_t shift, uint32_t width) 677 { 678 679 val &= ~(((1 << width) - 1) << shift); 680 val |= (v & ((1 << width) - 1)) << shift; 681 return (val); 682 } 683 684 static void 685 get_divisors(struct pll_sc *sc, uint32_t *m, uint32_t *n, uint32_t *p) 686 { 687 uint32_t val; 688 struct mnp_bits *mnp_bits; 689 690 mnp_bits = &sc->mnp_bits; 691 RD4(sc, sc->base_reg, &val); 692 *m = get_masked(val, mnp_bits->m_shift, mnp_bits->m_width); 693 *n = get_masked(val, mnp_bits->n_shift, mnp_bits->n_width); 694 *p = get_masked(val, mnp_bits->p_shift, mnp_bits->p_width); 695 } 696 697 static uint32_t 698 set_divisors(struct pll_sc *sc, uint32_t val, uint32_t m, uint32_t n, 699 uint32_t p) 700 { 701 struct mnp_bits *mnp_bits; 702 703 mnp_bits = &sc->mnp_bits; 704 val = set_masked(val, m, mnp_bits->m_shift, mnp_bits->m_width); 705 val = set_masked(val, n, mnp_bits->n_shift, mnp_bits->n_width); 706 val = set_masked(val, p, mnp_bits->p_shift, mnp_bits->p_width); 707 return (val); 708 } 709 710 static bool 711 is_locked(struct pll_sc *sc) 712 { 713 uint32_t reg; 714 715 switch (sc->type) { 716 case PLL_REFE: 717 RD4(sc, sc->misc_reg, ®); 718 reg &= PLLREFE_MISC_LOCK; 719 break; 720 721 case PLL_E: 722 RD4(sc, sc->misc_reg, ®); 723 reg &= PLLE_MISC_LOCK; 724 break; 725 726 default: 727 RD4(sc, sc->base_reg, ®); 728 reg &= PLL_BASE_LOCK; 729 break; 730 } 731 return (reg != 0); 732 } 733 734 static int 735 wait_for_lock(struct pll_sc *sc) 736 { 737 int i; 738 739 for (i = PLL_LOCK_TIMEOUT / 10; i > 0; i--) { 740 if (is_locked(sc)) 741 break; 742 DELAY(10); 743 } 744 if (i <= 0) { 745 printf("PLL lock timeout\n"); 746 return (ETIMEDOUT); 747 } 748 return (0); 749 } 750 751 static int 752 plle_enable(struct pll_sc *sc) 753 { 754 uint32_t reg; 755 int rv; 756 uint32_t pll_m = 2; 757 uint32_t pll_n = 125; 758 uint32_t pll_cml = 14; 759 760 /* Disable lock override. */ 761 RD4(sc, sc->base_reg, ®); 762 reg &= ~PLLE_BASE_LOCK_OVERRIDE; 763 WR4(sc, sc->base_reg, reg); 764 765 /* Enable SW control */ 766 RD4(sc, PLLE_AUX, ®); 767 reg |= PLLE_AUX_ENABLE_SWCTL; 768 reg &= ~PLLE_AUX_SEQ_ENABLE; 769 WR4(sc, PLLE_AUX, reg); 770 DELAY(10); 771 772 RD4(sc, sc->misc_reg, ®); 773 reg |= PLLE_MISC_LOCK_ENABLE; 774 reg |= PLLE_MISC_IDDQ_SWCTL; 775 reg &= ~PLLE_MISC_IDDQ_OVERRIDE_VALUE; 776 reg |= PLLE_MISC_PTS; 777 reg &= ~PLLE_MISC_VREG_BG_CTRL(~0); 778 reg &= ~PLLE_MISC_VREG_CTRL(~0); 779 WR4(sc, sc->misc_reg, reg); 780 DELAY(10); 781 782 RD4(sc, PLLE_SS_CNTL, ®); 783 reg |= PLLE_SS_CNTL_DISABLE; 784 WR4(sc, PLLE_SS_CNTL, reg); 785 786 RD4(sc, sc->base_reg, ®); 787 reg = set_divisors(sc, reg, pll_m, pll_n, pll_cml); 788 WR4(sc, sc->base_reg, reg); 789 DELAY(10); 790 791 pll_enable(sc); 792 rv = wait_for_lock(sc); 793 if (rv != 0) 794 return (rv); 795 796 RD4(sc, PLLE_SS_CNTL, ®); 797 reg &= ~PLLE_SS_CNTL_SSCINCINTRV(~0); 798 reg &= ~PLLE_SS_CNTL_SSCINC(~0); 799 reg &= ~PLLE_SS_CNTL_SSCINVERT; 800 reg &= ~PLLE_SS_CNTL_SSCCENTER; 801 reg &= ~PLLE_SS_CNTL_SSCMAX(~0); 802 reg |= PLLE_SS_CNTL_SSCINCINTRV(0x23); 803 reg |= PLLE_SS_CNTL_SSCINC(0x1); 804 reg |= PLLE_SS_CNTL_SSCMAX(0x21); 805 WR4(sc, PLLE_SS_CNTL, reg); 806 reg &= ~PLLE_SS_CNTL_SSCBYP; 807 reg &= ~PLLE_SS_CNTL_BYPASS_SS; 808 WR4(sc, PLLE_SS_CNTL, reg); 809 DELAY(10); 810 811 reg &= ~PLLE_SS_CNTL_INTERP_RESET; 812 WR4(sc, PLLE_SS_CNTL, reg); 813 DELAY(10); 814 815 /* HW control of brick pll. */ 816 RD4(sc, sc->misc_reg, ®); 817 reg &= ~PLLE_MISC_IDDQ_SWCTL; 818 WR4(sc, sc->misc_reg, reg); 819 820 RD4(sc, PLLE_AUX, ®); 821 reg |= PLLE_AUX_USE_LOCKDET; 822 reg |= PLLE_AUX_SS_SEQ_INCLUDE; 823 reg &= ~PLLE_AUX_ENABLE_SWCTL; 824 reg &= ~PLLE_AUX_SS_SWCTL; 825 WR4(sc, PLLE_AUX, reg); 826 reg |= PLLE_AUX_SEQ_START_STATE; 827 DELAY(10); 828 reg |= PLLE_AUX_SEQ_ENABLE; 829 WR4(sc, PLLE_AUX, reg); 830 831 /* Enable and start XUSBIO PLL HW control*/ 832 RD4(sc, XUSBIO_PLL_CFG0, ®); 833 reg &= ~XUSBIO_PLL_CFG0_CLK_ENABLE_SWCTL; 834 reg &= ~XUSBIO_PLL_CFG0_PADPLL_RESET_SWCTL; 835 reg |= XUSBIO_PLL_CFG0_PADPLL_USE_LOCKDET; 836 reg |= XUSBIO_PLL_CFG0_PADPLL_SLEEP_IDDQ; 837 reg &= ~XUSBIO_PLL_CFG0_SEQ_ENABLE; 838 WR4(sc, XUSBIO_PLL_CFG0, reg); 839 DELAY(10); 840 841 reg |= XUSBIO_PLL_CFG0_SEQ_ENABLE; 842 WR4(sc, XUSBIO_PLL_CFG0, reg); 843 844 845 /* Enable and start SATA PLL HW control */ 846 RD4(sc, SATA_PLL_CFG0, ®); 847 reg &= ~SATA_PLL_CFG0_PADPLL_RESET_SWCTL; 848 reg &= ~SATA_PLL_CFG0_PADPLL_RESET_OVERRIDE_VALUE; 849 reg |= SATA_PLL_CFG0_PADPLL_USE_LOCKDET; 850 reg |= SATA_PLL_CFG0_PADPLL_SLEEP_IDDQ; 851 reg &= ~SATA_PLL_CFG0_SEQ_IN_SWCTL; 852 reg &= ~SATA_PLL_CFG0_SEQ_RESET_INPUT_VALUE; 853 reg &= ~SATA_PLL_CFG0_SEQ_LANE_PD_INPUT_VALUE; 854 reg &= ~SATA_PLL_CFG0_SEQ_PADPLL_PD_INPUT_VALUE; 855 reg &= ~SATA_PLL_CFG0_SEQ_ENABLE; 856 WR4(sc, SATA_PLL_CFG0, reg); 857 DELAY(10); 858 reg |= SATA_PLL_CFG0_SEQ_ENABLE; 859 WR4(sc, SATA_PLL_CFG0, reg); 860 861 /* Enable HW control of PCIe PLL. */ 862 RD4(sc, PCIE_PLL_CFG, ®); 863 reg |= PCIE_PLL_CFG_SEQ_ENABLE; 864 WR4(sc, PCIE_PLL_CFG, reg); 865 866 return (0); 867 } 868 869 static int 870 tegra210_pll_set_gate(struct clknode *clknode, bool enable) 871 { 872 int rv; 873 struct pll_sc *sc; 874 875 sc = clknode_get_softc(clknode); 876 if (enable == 0) { 877 rv = pll_disable(sc); 878 return(rv); 879 } 880 881 if (sc->type == PLL_E) 882 rv = plle_enable(sc); 883 else 884 rv = pll_enable(sc); 885 return (rv); 886 } 887 888 static int 889 tegra210_pll_get_gate(struct clknode *clknode, bool *enabled) 890 { 891 uint32_t reg; 892 struct pll_sc *sc; 893 894 sc = clknode_get_softc(clknode); 895 RD4(sc, sc->base_reg, ®); 896 *enabled = reg & PLL_BASE_ENABLE ? true: false; 897 WR4(sc, sc->base_reg, reg); 898 return (0); 899 } 900 901 static int 902 pll_set_std(struct pll_sc *sc, uint64_t fin, uint64_t *fout, int flags, 903 uint32_t m, uint32_t n, uint32_t p) 904 { 905 uint32_t reg; 906 struct mnp_bits *mnp_bits; 907 int rv; 908 909 mnp_bits = &sc->mnp_bits; 910 if (m >= (1 << mnp_bits->m_width)) 911 return (ERANGE); 912 if (n >= (1 << mnp_bits->n_width)) 913 return (ERANGE); 914 if (pdiv_to_reg(sc, p) >= (1 << mnp_bits->p_width)) 915 return (ERANGE); 916 917 if (flags & CLK_SET_DRYRUN) { 918 if (((flags & (CLK_SET_ROUND_UP | CLK_SET_ROUND_DOWN)) == 0) && 919 (*fout != (((fin / m) * n) /p))) 920 return (ERANGE); 921 922 *fout = ((fin / m) * n) /p; 923 924 return (0); 925 } 926 927 pll_disable(sc); 928 929 /* take pll out of IDDQ */ 930 if (sc->iddq_reg != 0) 931 MD4(sc, sc->iddq_reg, sc->iddq_mask, 0); 932 933 RD4(sc, sc->base_reg, ®); 934 reg = set_masked(reg, m, mnp_bits->m_shift, mnp_bits->m_width); 935 reg = set_masked(reg, n, mnp_bits->n_shift, mnp_bits->n_width); 936 reg = set_masked(reg, pdiv_to_reg(sc, p), mnp_bits->p_shift, 937 mnp_bits->p_width); 938 WR4(sc, sc->base_reg, reg); 939 940 /* Enable PLL. */ 941 RD4(sc, sc->base_reg, ®); 942 reg |= PLL_BASE_ENABLE; 943 WR4(sc, sc->base_reg, reg); 944 945 /* Enable lock detection. */ 946 RD4(sc, sc->misc_reg, ®); 947 reg |= sc->lock_enable; 948 WR4(sc, sc->misc_reg, reg); 949 950 rv = wait_for_lock(sc); 951 if (rv != 0) { 952 /* Disable PLL */ 953 RD4(sc, sc->base_reg, ®); 954 reg &= ~PLL_BASE_ENABLE; 955 WR4(sc, sc->base_reg, reg); 956 return (rv); 957 } 958 RD4(sc, sc->misc_reg, ®); 959 960 pll_enable(sc); 961 *fout = ((fin / m) * n) / p; 962 return 0; 963 } 964 965 static int 966 plla_set_freq(struct pll_sc *sc, uint64_t fin, uint64_t *fout, int flags) 967 { 968 uint32_t m, n, p; 969 970 p = 1; 971 m = 3; 972 n = (*fout * p * m + fin / 2)/ fin; 973 dprintf("%s: m: %d, n: %d, p: %d\n", __func__, m, n, p); 974 return (pll_set_std(sc, fin, fout, flags, m, n, p)); 975 } 976 977 static int 978 pllc_set_freq(struct pll_sc *sc, uint64_t fin, uint64_t *fout, int flags) 979 { 980 uint32_t m, n, p; 981 982 p = 2; 983 m = 3; 984 n = (*fout * p * m + fin / 2)/ fin; 985 dprintf("%s: m: %d, n: %d, p: %d\n", __func__, m, n, p); 986 return (pll_set_std( sc, fin, fout, flags, m, n, p)); 987 } 988 989 static int 990 pllc4_set_freq(struct pll_sc *sc, uint64_t fin, uint64_t *fout, int flags) 991 { 992 uint32_t m, n, p; 993 994 p = 1; 995 m = 4; 996 n = (*fout * p * m + fin / 2)/ fin; 997 dprintf("%s: m: %d, n: %d, p: %d\n", __func__, m, n, p); 998 return (pll_set_std( sc, fin, fout, flags, m, n, p)); 999 } 1000 1001 static int 1002 plldp_set_freq(struct pll_sc *sc, uint64_t fin, uint64_t *fout, int flags) 1003 { 1004 uint32_t m, n, p; 1005 1006 p = 1; 1007 m = 4; 1008 n = (*fout * p * m + fin / 2)/ fin; 1009 dprintf("%s: m: %d, n: %d, p: %d\n", __func__, m, n, p); 1010 return (pll_set_std( sc, fin, fout, flags, m, n, p)); 1011 } 1012 1013 1014 /* 1015 * PLLD2 is used as source for pixel clock for HDMI. 1016 * We must be able to set it frequency very flexibly and 1017 * precisely (within 5% tolerance limit allowed by HDMI specs). 1018 * 1019 * For this reason, it is necessary to search the full state space. 1020 * Fortunately, thanks to early cycle terminations, performance 1021 * is within acceptable limits. 1022 */ 1023 #define PLLD2_PFD_MIN 12000000 /* 12 MHz */ 1024 #define PLLD2_PFD_MAX 38400000 /* 38.4 MHz */ 1025 #define PLLD2_VCO_MIN 750000000 /* 750 MHz */ 1026 #define PLLD2_VCO_MAX 1500000000 /* 1.5 GHz */ 1027 1028 static int 1029 plld2_set_freq(struct pll_sc *sc, uint64_t fin, uint64_t *fout, int flags) 1030 { 1031 uint32_t m, n, p; 1032 uint32_t best_m, best_n, best_p; 1033 uint64_t vco, pfd; 1034 int64_t err, best_err; 1035 struct mnp_bits *mnp_bits; 1036 struct pdiv_table *tbl; 1037 int p_idx, rv; 1038 1039 mnp_bits = &sc->mnp_bits; 1040 tbl = sc->pdiv_table; 1041 best_err = INT64_MAX; 1042 1043 for (p_idx = 0; tbl[p_idx].divider != 0; p_idx++) { 1044 p = tbl[p_idx].divider; 1045 1046 /* Check constraints */ 1047 vco = *fout * p; 1048 if (vco < PLLD2_VCO_MIN) 1049 continue; 1050 if (vco > PLLD2_VCO_MAX) 1051 break; 1052 1053 for (m = 1; m < (1 << mnp_bits->m_width); m++) { 1054 n = (*fout * p * m + fin / 2) / fin; 1055 1056 /* Check constraints */ 1057 if (n == 0) 1058 continue; 1059 if (n >= (1 << mnp_bits->n_width)) 1060 break; 1061 vco = (fin * n) / m; 1062 if (vco > PLLD2_VCO_MAX || vco < PLLD2_VCO_MIN) 1063 continue; 1064 pfd = fin / m; 1065 if (pfd > PLLD2_PFD_MAX || vco < PLLD2_PFD_MIN) 1066 continue; 1067 1068 /* Constraints passed, save best result */ 1069 err = *fout - vco / p; 1070 if (err < 0) 1071 err = -err; 1072 if (err < best_err) { 1073 best_err = err; 1074 best_p = p; 1075 best_m = m; 1076 best_n = n; 1077 } 1078 if (err == 0) 1079 goto done; 1080 } 1081 } 1082 done: 1083 /* 1084 * HDMI specification allows 5% pixel clock tolerance, 1085 * we will by a slightly stricter 1086 */ 1087 if (best_err > ((*fout * 100) / 4)) 1088 return (ERANGE); 1089 1090 if (flags & CLK_SET_DRYRUN) 1091 return (0); 1092 rv = pll_set_std(sc, fin, fout, flags, best_m, best_n, best_p); 1093 /* XXXX Panic for rv == ERANGE ? */ 1094 return (rv); 1095 } 1096 1097 static int 1098 pllrefe_set_freq(struct pll_sc *sc, uint64_t fin, uint64_t *fout, int flags) 1099 { 1100 uint32_t m, n, p; 1101 1102 m = 1; 1103 p = 1; 1104 n = *fout * p * m / fin; 1105 dprintf("%s: m: %d, n: %d, p: %d\n", __func__, m, n, p); 1106 return (pll_set_std(sc, fin, fout, flags, m, n, p)); 1107 } 1108 1109 #define PLLX_PFD_MIN 12000000LL /* 12 MHz */ 1110 #define PLLX_PFD_MAX 38400000LL /* 38.4 MHz */ 1111 #define PLLX_VCO_MIN 900000000LL /* 0.9 GHz */ 1112 #define PLLX_VCO_MAX 3000000000LL /* 3 GHz */ 1113 1114 static int 1115 pllx_set_freq(struct pll_sc *sc, uint64_t fin, uint64_t *fout, int flags) 1116 { 1117 struct mnp_bits *mnp_bits; 1118 uint32_t m, n, p; 1119 uint32_t old_m, old_n, old_p; 1120 uint32_t reg; 1121 int i, rv; 1122 1123 mnp_bits = &sc->mnp_bits; 1124 1125 get_divisors(sc, &old_m, &old_n, &old_p); 1126 old_p = reg_to_pdiv(sc, old_p); 1127 1128 /* Pre-divider is fixed, Compute post-divider */ 1129 m = old_m; 1130 p = 1; 1131 while ((*fout * p) < PLLX_VCO_MIN) 1132 p++; 1133 if ((*fout * p) > PLLX_VCO_MAX) 1134 return (ERANGE); 1135 1136 n = (*fout * p * m + fin / 2) / fin; 1137 dprintf("%s: m: %d, n: %d, p: %d\n", __func__, m, n, p); 1138 1139 if (m >= (1 << mnp_bits->m_width)) 1140 return (ERANGE); 1141 if (n >= (1 << mnp_bits->n_width)) 1142 return (ERANGE); 1143 if (pdiv_to_reg(sc, p) >= (1 << mnp_bits->p_width)) 1144 return (ERANGE); 1145 1146 if (flags & CLK_SET_DRYRUN) { 1147 if (((flags & (CLK_SET_ROUND_UP | CLK_SET_ROUND_DOWN)) == 0) && 1148 (*fout != (((fin / m) * n) /p))) 1149 return (ERANGE); 1150 *fout = ((fin / m) * n) /p; 1151 return (0); 1152 } 1153 1154 /* If new post-divider is bigger that original, set it now. */ 1155 if (p < old_p) { 1156 RD4(sc, sc->base_reg, ®); 1157 reg = set_masked(reg, pdiv_to_reg(sc, p), mnp_bits->p_shift, 1158 mnp_bits->p_width); 1159 WR4(sc, sc->base_reg, reg); 1160 } 1161 DELAY(100); 1162 1163 /* vvv Program dynamic VCO ramp. vvv */ 1164 /* 1 - disable dynamic ramp mode. */ 1165 RD4(sc, PLLX_MISC_2, ®); 1166 reg &= ~PLLX_MISC_2_EN_DYNRAMP; 1167 WR4(sc, PLLX_MISC_2, reg); 1168 1169 /* 2 - Setup new ndiv. */ 1170 RD4(sc, PLLX_MISC_2, ®); 1171 reg &= ~PLLX_MISC_2_NDIV_NEW(~0); 1172 reg |= PLLX_MISC_2_NDIV_NEW(n); 1173 WR4(sc, PLLX_MISC_2, reg); 1174 1175 /* 3 - enable dynamic ramp. */ 1176 RD4(sc, PLLX_MISC_2, ®); 1177 reg |= PLLX_MISC_2_EN_DYNRAMP; 1178 WR4(sc, PLLX_MISC_2, reg); 1179 1180 /* 4 - wait for done. */ 1181 for (i = PLL_LOCK_TIMEOUT / 10; i > 0; i--) { 1182 RD4(sc, PLLX_MISC_2, ®); 1183 if (reg & PLLX_MISC_2_DYNRAMP_DONE) 1184 break; 1185 DELAY(10); 1186 } 1187 if (i <= 0) { 1188 printf("PLL X dynamic ramp timedout\n"); 1189 return (ETIMEDOUT); 1190 } 1191 1192 /* 5 - copy new ndiv to base register. */ 1193 RD4(sc, sc->base_reg, ®); 1194 reg = set_masked(reg, n, mnp_bits->n_shift, 1195 mnp_bits->n_width); 1196 WR4(sc, sc->base_reg, reg); 1197 1198 /* 6 - disable dynamic ramp mode. */ 1199 RD4(sc, PLLX_MISC_2, ®); 1200 reg &= ~PLLX_MISC_2_EN_DYNRAMP; 1201 WR4(sc, PLLX_MISC_2, reg); 1202 1203 rv = wait_for_lock(sc); 1204 if (rv != 0) { 1205 printf("PLL X is not locked !!\n"); 1206 } 1207 /* ^^^ Dynamic ramp done. ^^^ */ 1208 1209 /* If new post-divider is smaller that original, set it. */ 1210 if (p > old_p) { 1211 RD4(sc, sc->base_reg, ®); 1212 reg = set_masked(reg, pdiv_to_reg(sc, p), mnp_bits->p_shift, 1213 mnp_bits->p_width); 1214 WR4(sc, sc->base_reg, reg); 1215 } 1216 1217 *fout = ((fin / m) * n) / p; 1218 return (0); 1219 } 1220 1221 /* Simplified setup for 38.4 MHz clock. */ 1222 #define PLLX_STEP_A 0x04 1223 #define PLLX_STEP_B 0x05 1224 static int 1225 pllx_init(struct pll_sc *sc) 1226 { 1227 uint32_t reg; 1228 1229 RD4(sc, PLLX_MISC, ®); 1230 reg = PLLX_MISC_LOCK_ENABLE; 1231 WR4(sc, PLLX_MISC, reg); 1232 1233 /* Setup dynamic ramp. */ 1234 reg = 0; 1235 reg |= PLLX_MISC_2_DYNRAMP_STEPA(PLLX_STEP_A); 1236 reg |= PLLX_MISC_2_DYNRAMP_STEPB(PLLX_STEP_B); 1237 WR4(sc, PLLX_MISC_2, reg); 1238 1239 /* Disable SDM. */ 1240 reg = 0; 1241 WR4(sc, PLLX_MISC_4, reg); 1242 WR4(sc, PLLX_MISC_5, reg); 1243 1244 return (0); 1245 } 1246 1247 static int 1248 tegra210_pll_set_freq(struct clknode *clknode, uint64_t fin, uint64_t *fout, 1249 int flags, int *stop) 1250 { 1251 *stop = 1; 1252 int rv; 1253 struct pll_sc *sc; 1254 1255 sc = clknode_get_softc(clknode); 1256 dprintf("%s: %s requested freq: %lu, input freq: %lu\n", __func__, 1257 clknode_get_name(clknode), *fout, fin); 1258 switch (sc->type) { 1259 case PLL_A: 1260 rv = plla_set_freq(sc, fin, fout, flags); 1261 break; 1262 1263 case PLL_C: 1264 case PLL_C2: 1265 case PLL_C3: 1266 rv = pllc_set_freq(sc, fin, fout, flags); 1267 break; 1268 1269 case PLL_C4: 1270 rv = pllc4_set_freq(sc, fin, fout, flags); 1271 break; 1272 1273 case PLL_D2: 1274 rv = plld2_set_freq(sc, fin, fout, flags); 1275 break; 1276 1277 case PLL_DP: 1278 rv = plldp_set_freq(sc, fin, fout, flags); 1279 break; 1280 1281 case PLL_REFE: 1282 rv = pllrefe_set_freq(sc, fin, fout, flags); 1283 break; 1284 1285 case PLL_X: 1286 rv = pllx_set_freq(sc, fin, fout, flags); 1287 break; 1288 1289 case PLL_U: 1290 if (*fout == 480000000) /* PLLU is fixed to 480 MHz */ 1291 rv = 0; 1292 else 1293 rv = ERANGE; 1294 break; 1295 default: 1296 rv = ENXIO; 1297 break; 1298 } 1299 1300 return (rv); 1301 } 1302 1303 1304 static int 1305 tegra210_pll_init(struct clknode *clk, device_t dev) 1306 { 1307 struct pll_sc *sc; 1308 uint32_t reg, rv; 1309 1310 sc = clknode_get_softc(clk); 1311 1312 if (sc->type == PLL_X) { 1313 rv = pllx_init(sc); 1314 if (rv != 0) 1315 return (rv); 1316 } 1317 1318 /* If PLL is enabled, enable lock detect too. */ 1319 RD4(sc, sc->base_reg, ®); 1320 if (reg & PLL_BASE_ENABLE) { 1321 RD4(sc, sc->misc_reg, ®); 1322 reg |= sc->lock_enable; 1323 WR4(sc, sc->misc_reg, reg); 1324 } 1325 if (sc->type == PLL_REFE) { 1326 RD4(sc, sc->misc_reg, ®); 1327 reg &= ~(1 << 29); /* Disable lock override */ 1328 WR4(sc, sc->misc_reg, reg); 1329 } 1330 clknode_init_parent_idx(clk, 0); 1331 return(0); 1332 } 1333 1334 static int 1335 tegra210_pll_recalc(struct clknode *clk, uint64_t *freq) 1336 { 1337 struct pll_sc *sc; 1338 uint32_t m, n, p, pr; 1339 uint32_t reg, misc_reg; 1340 int locked; 1341 1342 sc = clknode_get_softc(clk); 1343 1344 RD4(sc, sc->base_reg, ®); 1345 RD4(sc, sc->misc_reg, &misc_reg); 1346 1347 get_divisors(sc, &m, &n, &pr); 1348 1349 /* If VCO is directlu exposed, P divider is handled by external node */ 1350 if (sc->flags & PLL_FLAG_VCO_OUT) 1351 p = 1; 1352 else 1353 p = reg_to_pdiv(sc, pr); 1354 1355 locked = is_locked(sc); 1356 1357 dprintf("%s: %s (0x%08x, 0x%08x) - m: %d, n: %d, p: %d (%d): " 1358 "e: %d, r: %d, o: %d - %s\n", __func__, 1359 clknode_get_name(clk), reg, misc_reg, m, n, p, pr, 1360 (reg >> 30) & 1, (reg >> 29) & 1, (reg >> 28) & 1, 1361 locked ? "locked" : "unlocked"); 1362 1363 if ((m == 0) || (n == 0) || (p == 0)) { 1364 *freq = 0; 1365 return (EINVAL); 1366 } 1367 if (!locked) { 1368 *freq = 0; 1369 return (0); 1370 } 1371 *freq = ((*freq / m) * n) / p; 1372 return (0); 1373 } 1374 1375 static int 1376 pll_register(struct clkdom *clkdom, struct clk_pll_def *clkdef) 1377 { 1378 struct clknode *clk; 1379 struct pll_sc *sc; 1380 1381 clk = clknode_create(clkdom, &tegra210_pll_class, &clkdef->clkdef); 1382 if (clk == NULL) 1383 return (ENXIO); 1384 1385 sc = clknode_get_softc(clk); 1386 sc->clkdev = clknode_get_device(clk); 1387 sc->type = clkdef->type; 1388 sc->base_reg = clkdef->base_reg; 1389 sc->misc_reg = clkdef->misc_reg; 1390 sc->lock_enable = clkdef->lock_enable; 1391 sc->iddq_reg = clkdef->iddq_reg; 1392 sc->iddq_mask = clkdef->iddq_mask; 1393 sc->flags = clkdef->flags; 1394 sc->pdiv_table = clkdef->pdiv_table; 1395 sc->mnp_bits = clkdef->mnp_bits; 1396 clknode_register(clkdom, clk); 1397 return (0); 1398 } 1399 1400 static void config_utmi_pll(struct tegra210_car_softc *sc) 1401 { 1402 uint32_t reg; 1403 /* 1404 * XXX Simplified UTMIP settings for 38.4MHz base clock. 1405 */ 1406 #define ENABLE_DELAY_COUNT 0x00 1407 #define STABLE_COUNT 0x00 1408 #define ACTIVE_DELAY_COUNT 0x06 1409 #define XTAL_FREQ_COUNT 0x80 1410 1411 CLKDEV_READ_4(sc->dev, UTMIPLL_HW_PWRDN_CFG0, ®); 1412 reg &= ~UTMIPLL_HW_PWRDN_CFG0_IDDQ_OVERRIDE; 1413 CLKDEV_WRITE_4(sc->dev, UTMIPLL_HW_PWRDN_CFG0, reg); 1414 1415 CLKDEV_READ_4(sc->dev, UTMIP_PLL_CFG2, ®); 1416 reg &= ~UTMIP_PLL_CFG2_STABLE_COUNT(~0); 1417 reg |= UTMIP_PLL_CFG2_STABLE_COUNT(STABLE_COUNT); 1418 reg &= ~UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(~0); 1419 reg |= UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(ACTIVE_DELAY_COUNT); 1420 CLKDEV_WRITE_4(sc->dev, UTMIP_PLL_CFG2, reg); 1421 1422 CLKDEV_READ_4(sc->dev, UTMIP_PLL_CFG1, ®); 1423 reg &= ~UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(~0); 1424 reg |= UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(ENABLE_DELAY_COUNT); 1425 reg &= ~UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(~0); 1426 reg |= UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(XTAL_FREQ_COUNT); 1427 reg |= UTMIP_PLL_CFG1_FORCE_PLLU_POWERUP; 1428 CLKDEV_WRITE_4(sc->dev, UTMIP_PLL_CFG1, reg); 1429 1430 reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN; 1431 reg |= UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERUP; 1432 CLKDEV_WRITE_4(sc->dev, UTMIP_PLL_CFG1, reg); 1433 DELAY(20); 1434 1435 /* Setup samplers. */ 1436 CLKDEV_READ_4(sc->dev, UTMIP_PLL_CFG2, ®); 1437 reg |= UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERUP; 1438 reg |= UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERUP; 1439 reg |= UTMIP_PLL_CFG2_FORCE_PD_SAMP_D_POWERUP; 1440 reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERDOWN; 1441 reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERDOWN; 1442 reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_D_POWERDOWN; 1443 CLKDEV_WRITE_4(sc->dev, UTMIP_PLL_CFG2, reg); 1444 1445 /* Powerup UTMIP. */ 1446 CLKDEV_READ_4(sc->dev, UTMIP_PLL_CFG1, ®); 1447 reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERUP; 1448 reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN; 1449 CLKDEV_WRITE_4(sc->dev, UTMIP_PLL_CFG1, reg); 1450 DELAY(10); 1451 1452 /* Prepare UTMIP sequencer. */ 1453 CLKDEV_READ_4(sc->dev, UTMIPLL_HW_PWRDN_CFG0, ®); 1454 reg |= UTMIPLL_HW_PWRDN_CFG0_USE_LOCKDET; 1455 reg &= ~UTMIPLL_HW_PWRDN_CFG0_CLK_ENABLE_SWCTL; 1456 CLKDEV_WRITE_4(sc->dev, UTMIPLL_HW_PWRDN_CFG0, reg); 1457 DELAY(10); 1458 1459 CLKDEV_READ_4(sc->dev, XUSB_PLL_CFG0, ®); 1460 reg &= ~XUSB_PLL_CFG0_UTMIPLL_LOCK_DLY; 1461 CLKDEV_WRITE_4(sc->dev, XUSB_PLL_CFG0, reg); 1462 DELAY(10); 1463 1464 /* HW control of UTMIPLL. */ 1465 CLKDEV_READ_4(sc->dev, UTMIPLL_HW_PWRDN_CFG0, ®); 1466 reg |= UTMIPLL_HW_PWRDN_CFG0_SEQ_ENABLE; 1467 CLKDEV_WRITE_4(sc->dev, UTMIPLL_HW_PWRDN_CFG0, reg); 1468 } 1469 1470 void 1471 tegra210_init_plls(struct tegra210_car_softc *sc) 1472 { 1473 int i, rv; 1474 1475 for (i = 0; i < nitems(tegra210_pll_sources); i++) { 1476 rv = clknode_mux_register(sc->clkdom, tegra210_pll_sources + i); 1477 if (rv != 0) 1478 panic("clk_mux_register failed"); 1479 } 1480 1481 for (i = 0; i < nitems(pll_clks); i++) { 1482 rv = pll_register(sc->clkdom, pll_clks + i); 1483 if (rv != 0) 1484 panic("pll_register failed"); 1485 } 1486 1487 config_utmi_pll(sc); 1488 1489 for (i = 0; i < nitems(tegra210_pll_fdivs); i++) { 1490 rv = clknode_fixed_register(sc->clkdom, tegra210_pll_fdivs + i); 1491 if (rv != 0) 1492 panic("clk_fixed_register failed"); 1493 } 1494 1495 for (i = 0; i < nitems(tegra210_pll_gates); i++) { 1496 rv = clknode_gate_register(sc->clkdom, tegra210_pll_gates + i); 1497 if (rv != 0) 1498 panic("clk_gate_register failed"); 1499 } 1500 1501 for (i = 0; i < nitems(tegra210_pll_divs); i++) { 1502 rv = clknode_div_register(sc->clkdom, tegra210_pll_divs + i); 1503 if (rv != 0) 1504 panic("clk_div_register failed"); 1505 } 1506 } 1507