1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause 3 * 4 * Copyright (c) 2012-2013 Thomas Skibo 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 19 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 20 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 22 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 26 * SUCH DAMAGE. 27 * 28 * $FreeBSD$ 29 */ 30 31 /* 32 * A host-controller driver for Zynq-7000's USB OTG controller. 33 * 34 * Reference: Zynq-7000 All Programmable SoC Technical Reference Manual. 35 * (v1.4) November 16, 2012. Xilinx doc UG585. Ch. 15 covers the USB 36 * controller and register definitions are in appendix B.34. 37 */ 38 39 #include <sys/cdefs.h> 40 __FBSDID("$FreeBSD$"); 41 42 #include <sys/param.h> 43 #include <sys/systm.h> 44 #include <sys/bus.h> 45 #include <sys/conf.h> 46 #include <sys/kernel.h> 47 #include <sys/lock.h> 48 #include <sys/module.h> 49 #include <sys/mutex.h> 50 #include <sys/condvar.h> 51 #include <sys/resource.h> 52 #include <sys/rman.h> 53 54 #include <machine/bus.h> 55 #include <machine/resource.h> 56 #include <machine/stdarg.h> 57 58 #include <dev/ofw/ofw_bus.h> 59 #include <dev/ofw/ofw_bus_subr.h> 60 61 #include <dev/usb/usb.h> 62 #include <dev/usb/usbdi.h> 63 64 #include <dev/usb/usb_core.h> 65 #include <dev/usb/usb_busdma.h> 66 #include <dev/usb/usb_process.h> 67 #include <dev/usb/usb_util.h> 68 69 #include <dev/usb/usb_controller.h> 70 #include <dev/usb/usb_bus.h> 71 #include <dev/usb/controller/ehci.h> 72 #include <dev/usb/controller/ehcireg.h> 73 74 /* Register definitions. */ 75 #define ZY7_USB_ID 0x0000 76 #define ZY7_USB_HWGENERAL 0x0004 77 #define ZY7_USB_HWHOST 0x0008 78 #define ZY7_USB_HWDEVICE 0x000c 79 #define ZY7_USB_HWTXBUF 0x0010 80 #define ZY7_USB_HWRXBUF 0x0014 81 #define ZY7_USB_GPTIMER0LD 0x0080 82 #define ZY7_USB_GPTIMER0CTRL 0x0084 83 #define ZY7_USB_GPTIMER1LD 0x0088 84 #define ZY7_USB_GPTIMER1CTRL 0x008c 85 #define ZY7_USB_SBUSCFG 0x0090 86 #define ZY7_USB_CAPLENGTH_HCIVERSION 0x0100 87 #define ZY7_USB_HCSPARAMS 0x0104 88 #define ZY7_USB_HCCPARAMS 0x0108 89 #define ZY7_USB_DCIVERSION 0x0120 90 #define ZY7_USB_DCCPARAMS 0x0124 91 #define ZY7_USB_USBCMD 0x0140 92 #define ZY7_USB_USBSTS 0x0144 93 #define ZY7_USB_USBINTR 0x0148 94 #define ZY7_USB_FRINDEX 0x014c 95 #define ZY7_USB_PERIODICLISTBASE_DEICEADDR 0x0154 96 #define ZY7_USB_ASYNCLISTADDR_ENDPOINTLISTADDR 0x0158 97 #define ZY7_USB_TTCTRL 0x015c 98 #define ZY7_USB_BURSTSIZE 0x0160 99 #define ZY7_USB_TXFILLTUNING 0x0164 100 #define ZY7_USB_TXFILLTUNING_TXFIFOTHRES_SHFT 16 101 #define ZY7_USB_TXFILLTUNING_TXFIFOTHRES_MASK (0x3f<<16) 102 #define ZY7_USB_TXTFILLTUNING 0x0168 103 #define ZY7_USB_IC_USB 0x016c 104 #define ZY7_USB_ULPI_VIEWPORT 0x0170 105 #define ZY7_USB_ULPI_VIEWPORT_WU (1<<31) 106 #define ZY7_USB_ULPI_VIEWPORT_RUN (1<<30) 107 #define ZY7_USB_ULPI_VIEWPORT_RW (1<<29) 108 #define ZY7_USB_ULPI_VIEWPORT_SS (1<<27) 109 #define ZY7_USB_ULPI_VIEWPORT_PORT_MASK (7<<24) 110 #define ZY7_USB_ULPI_VIEWPORT_PORT_SHIFT 24 111 #define ZY7_USB_ULPI_VIEWPORT_ADDR_MASK (0xff<<16) 112 #define ZY7_USB_ULPI_VIEWPORT_ADDR_SHIFT 16 113 #define ZY7_USB_ULPI_VIEWPORT_DATARD_MASK (0xff<<8) 114 #define ZY7_USB_ULPI_VIEWPORT_DATARD_SHIFT 8 115 #define ZY7_USB_ULPI_VIEWPORT_DATAWR_MASK (0xff<<0) 116 #define ZY7_USB_ULPI_VIEWPORT_DATAWR_SHIFT 0 117 #define ZY7_USB_ENDPTNAK 0x0178 118 #define ZY7_USB_ENDPTNAKEN 0x017c 119 #define ZY7_USB_CONFIGFLAG 0x0180 120 #define ZY7_USB_PORTSC(n) (0x0180+4*(n)) 121 #define ZY7_USB_PORTSC_PTS_MASK (3<<30) 122 #define ZY7_USB_PORTSC_PTS_SHIFT 30 123 #define ZY7_USB_PORTSC_PTS_UTMI (0<<30) 124 #define ZY7_USB_PORTSC_PTS_ULPI (2<<30) 125 #define ZY7_USB_PORTSC_PTS_SERIAL (3<<30) 126 #define ZY7_USB_PORTSC_PTW (1<<28) 127 #define ZY7_USB_PORTSC_PTS2 (1<<25) 128 #define ZY7_USB_OTGSC 0x01a4 129 #define ZY7_USB_USBMODE 0x01a8 130 #define ZY7_USB_ENDPTSETUPSTAT 0x01ac 131 #define ZY7_USB_ENDPTPRIME 0x01b0 132 #define ZY7_USB_ENDPTFLUSH 0x01b4 133 #define ZY7_USB_ENDPTSTAT 0x01b8 134 #define ZY7_USB_ENDPTCOMPLETE 0x01bc 135 #define ZY7_USB_ENDPTCTRL(n) (0x01c0+4*(n)) 136 137 #define EHCI_REG_OFFSET ZY7_USB_CAPLENGTH_HCIVERSION 138 #define EHCI_REG_SIZE 0x100 139 140 static void 141 zy7_ehci_post_reset(struct ehci_softc *ehci_softc) 142 { 143 uint32_t usbmode; 144 145 /* Force HOST mode */ 146 usbmode = EOREAD4(ehci_softc, EHCI_USBMODE_NOLPM); 147 usbmode &= ~EHCI_UM_CM; 148 usbmode |= EHCI_UM_CM_HOST; 149 EOWRITE4(ehci_softc, EHCI_USBMODE_NOLPM, usbmode); 150 } 151 152 static int 153 zy7_phy_config(device_t dev, bus_space_tag_t io_tag, bus_space_handle_t bsh) 154 { 155 phandle_t node; 156 char buf[64]; 157 uint32_t portsc; 158 int tries; 159 160 node = ofw_bus_get_node(dev); 161 162 if (OF_getprop(node, "phy_type", buf, sizeof(buf)) > 0) { 163 portsc = bus_space_read_4(io_tag, bsh, ZY7_USB_PORTSC(1)); 164 portsc &= ~(ZY7_USB_PORTSC_PTS_MASK | ZY7_USB_PORTSC_PTW | 165 ZY7_USB_PORTSC_PTS2); 166 167 if (strcmp(buf,"ulpi") == 0) 168 portsc |= ZY7_USB_PORTSC_PTS_ULPI; 169 else if (strcmp(buf,"utmi") == 0) 170 portsc |= ZY7_USB_PORTSC_PTS_UTMI; 171 else if (strcmp(buf,"utmi-wide") == 0) 172 portsc |= (ZY7_USB_PORTSC_PTS_UTMI | 173 ZY7_USB_PORTSC_PTW); 174 else if (strcmp(buf, "serial") == 0) 175 portsc |= ZY7_USB_PORTSC_PTS_SERIAL; 176 177 bus_space_write_4(io_tag, bsh, ZY7_USB_PORTSC(1), portsc); 178 } 179 180 if (OF_getprop(node, "phy_vbus_ext", buf, sizeof(buf)) >= 0) { 181 /* Tell PHY that VBUS is supplied externally. */ 182 bus_space_write_4(io_tag, bsh, ZY7_USB_ULPI_VIEWPORT, 183 ZY7_USB_ULPI_VIEWPORT_RUN | 184 ZY7_USB_ULPI_VIEWPORT_RW | 185 (0 << ZY7_USB_ULPI_VIEWPORT_PORT_SHIFT) | 186 (0x0b << ZY7_USB_ULPI_VIEWPORT_ADDR_SHIFT) | 187 (0x60 << ZY7_USB_ULPI_VIEWPORT_DATAWR_SHIFT) 188 ); 189 190 tries = 100; 191 while ((bus_space_read_4(io_tag, bsh, ZY7_USB_ULPI_VIEWPORT) & 192 ZY7_USB_ULPI_VIEWPORT_RUN) != 0) { 193 if (--tries < 0) 194 return (-1); 195 DELAY(1); 196 } 197 } 198 199 return (0); 200 } 201 202 static int 203 zy7_ehci_probe(device_t dev) 204 { 205 206 if (!ofw_bus_status_okay(dev)) 207 return (ENXIO); 208 209 if (!ofw_bus_is_compatible(dev, "xlnx,zy7_ehci")) 210 return (ENXIO); 211 212 device_set_desc(dev, "Zynq-7000 EHCI USB 2.0 controller"); 213 return (0); 214 } 215 216 static int zy7_ehci_detach(device_t dev); 217 218 static int 219 zy7_ehci_attach(device_t dev) 220 { 221 ehci_softc_t *sc = device_get_softc(dev); 222 bus_space_handle_t bsh; 223 int err, rid; 224 225 /* initialize some bus fields */ 226 sc->sc_bus.parent = dev; 227 sc->sc_bus.devices = sc->sc_devices; 228 sc->sc_bus.devices_max = EHCI_MAX_DEVICES; 229 sc->sc_bus.dma_bits = 32; 230 231 /* get all DMA memory */ 232 if (usb_bus_mem_alloc_all(&sc->sc_bus, 233 USB_GET_DMA_TAG(dev), &ehci_iterate_hw_softc)) 234 return (ENOMEM); 235 236 /* Allocate memory. */ 237 rid = 0; 238 sc->sc_io_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, 239 &rid, RF_ACTIVE); 240 if (sc->sc_io_res == NULL) { 241 device_printf(dev, "Can't allocate memory"); 242 zy7_ehci_detach(dev); 243 return (ENOMEM); 244 } 245 246 sc->sc_io_tag = rman_get_bustag(sc->sc_io_res); 247 bsh = rman_get_bushandle(sc->sc_io_res); 248 sc->sc_io_size = EHCI_REG_SIZE; 249 250 if (bus_space_subregion(sc->sc_io_tag, bsh, EHCI_REG_OFFSET, 251 sc->sc_io_size, &sc->sc_io_hdl) != 0) 252 panic("%s: unable to subregion USB host registers", 253 device_get_name(dev)); 254 255 /* Allocate IRQ. */ 256 rid = 0; 257 sc->sc_irq_res = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, 258 RF_ACTIVE); 259 if (sc->sc_irq_res == NULL) { 260 device_printf(dev, "Can't allocate IRQ\n"); 261 zy7_ehci_detach(dev); 262 return (ENOMEM); 263 } 264 265 /* Add USB device */ 266 sc->sc_bus.bdev = device_add_child(dev, "usbus", -1); 267 if (!sc->sc_bus.bdev) { 268 device_printf(dev, "Could not add USB device\n"); 269 zy7_ehci_detach(dev); 270 return (ENXIO); 271 } 272 device_set_ivars(sc->sc_bus.bdev, &sc->sc_bus); 273 device_set_desc(sc->sc_bus.bdev, "Zynq-7000 ehci USB 2.0 controller"); 274 275 strcpy(sc->sc_vendor, "Xilinx"); /* or IP vendor? */ 276 277 /* Activate the interrupt */ 278 err = bus_setup_intr(dev, sc->sc_irq_res, INTR_TYPE_BIO | INTR_MPSAFE, 279 NULL, (driver_intr_t *)ehci_interrupt, sc, 280 &sc->sc_intr_hdl); 281 if (err) { 282 device_printf(dev, "Cannot setup IRQ\n"); 283 zy7_ehci_detach(dev); 284 return (err); 285 } 286 287 /* Customization. */ 288 sc->sc_flags |= EHCI_SCFLG_TT | EHCI_SCFLG_NORESTERM; 289 sc->sc_vendor_post_reset = zy7_ehci_post_reset; 290 sc->sc_vendor_get_port_speed = ehci_get_port_speed_portsc; 291 292 /* Modify FIFO burst threshold from 2 to 8. */ 293 bus_space_write_4(sc->sc_io_tag, bsh, 294 ZY7_USB_TXFILLTUNING, 295 8 << ZY7_USB_TXFILLTUNING_TXFIFOTHRES_SHFT); 296 297 /* Handle PHY options. */ 298 if (zy7_phy_config(dev, sc->sc_io_tag, bsh) < 0) { 299 device_printf(dev, "Cannot config phy!\n"); 300 zy7_ehci_detach(dev); 301 return (EIO); 302 } 303 304 /* Init ehci. */ 305 err = ehci_init(sc); 306 if (!err) { 307 sc->sc_flags |= EHCI_SCFLG_DONEINIT; 308 err = device_probe_and_attach(sc->sc_bus.bdev); 309 } 310 if (err) { 311 device_printf(dev, "USB init failed err=%d\n", err); 312 zy7_ehci_detach(dev); 313 return (err); 314 } 315 316 return (0); 317 } 318 319 static int 320 zy7_ehci_detach(device_t dev) 321 { 322 ehci_softc_t *sc = device_get_softc(dev); 323 324 /* during module unload there are lots of children leftover */ 325 device_delete_children(dev); 326 327 if ((sc->sc_flags & EHCI_SCFLG_DONEINIT) != 0) { 328 ehci_detach(sc); 329 sc->sc_flags &= ~EHCI_SCFLG_DONEINIT; 330 } 331 332 if (sc->sc_irq_res) { 333 if (sc->sc_intr_hdl != NULL) 334 bus_teardown_intr(dev, sc->sc_irq_res, 335 sc->sc_intr_hdl); 336 bus_release_resource(dev, SYS_RES_IRQ, 337 rman_get_rid(sc->sc_irq_res), sc->sc_irq_res); 338 } 339 340 if (sc->sc_io_res) 341 bus_release_resource(dev, SYS_RES_MEMORY, 342 rman_get_rid(sc->sc_io_res), sc->sc_io_res); 343 usb_bus_mem_free_all(&sc->sc_bus, &ehci_iterate_hw_softc); 344 345 return (0); 346 } 347 348 static device_method_t ehci_methods[] = { 349 /* Device interface */ 350 DEVMETHOD(device_probe, zy7_ehci_probe), 351 DEVMETHOD(device_attach, zy7_ehci_attach), 352 DEVMETHOD(device_detach, zy7_ehci_detach), 353 DEVMETHOD(device_suspend, bus_generic_suspend), 354 DEVMETHOD(device_resume, bus_generic_resume), 355 DEVMETHOD(device_shutdown, bus_generic_shutdown), 356 357 /* Bus interface */ 358 DEVMETHOD(bus_print_child, bus_generic_print_child), 359 360 DEVMETHOD_END 361 }; 362 363 static driver_t ehci_driver = { 364 "ehci", 365 ehci_methods, 366 sizeof(struct ehci_softc), 367 }; 368 369 DRIVER_MODULE(zy7_ehci, simplebus, ehci_driver, NULL, NULL); 370 MODULE_DEPEND(zy7_ehci, usb, 1, 1, 1); 371