xref: /freebsd/sys/arm/xilinx/zy7_devcfg.c (revision d8a0fe102c0cfdfcd5b818f850eff09d8536c9bc)
1 /*-
2  * SPDX-License-Identifier: BSD-2-Clause-FreeBSD
3  *
4  * Copyright (c) 2013 Thomas Skibo
5  * All rights reserved.
6  *
7  * Redistribution and use in source and binary forms, with or without
8  * modification, are permitted provided that the following conditions
9  * are met:
10  * 1. Redistributions of source code must retain the above copyright
11  *    notice, this list of conditions and the following disclaimer.
12  * 2. Redistributions in binary form must reproduce the above copyright
13  *    notice, this list of conditions and the following disclaimer in the
14  *    documentation and/or other materials provided with the distribution.
15  *
16  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
17  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
18  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
19  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
20  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
21  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
22  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
23  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
24  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
25  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
26  * SUCH DAMAGE.
27  *
28  * $FreeBSD$
29  */
30 
31 /*
32  * Zynq-7000 Devcfg driver.  This allows programming the PL (FPGA) section
33  * of Zynq.
34  *
35  * Reference: Zynq-7000 All Programmable SoC Technical Reference Manual.
36  * (v1.4) November 16, 2012.  Xilinx doc UG585.  PL Configuration is
37  * covered in section 6.4.5.
38  */
39 
40 #include <sys/cdefs.h>
41 __FBSDID("$FreeBSD$");
42 
43 #include <sys/param.h>
44 #include <sys/systm.h>
45 #include <sys/conf.h>
46 #include <sys/kernel.h>
47 #include <sys/module.h>
48 #include <sys/sysctl.h>
49 #include <sys/lock.h>
50 #include <sys/mutex.h>
51 #include <sys/resource.h>
52 #include <sys/rman.h>
53 #include <sys/uio.h>
54 
55 #include <machine/bus.h>
56 #include <machine/resource.h>
57 #include <machine/stdarg.h>
58 
59 #include <dev/ofw/ofw_bus.h>
60 #include <dev/ofw/ofw_bus_subr.h>
61 
62 #include <arm/xilinx/zy7_slcr.h>
63 
64 struct zy7_devcfg_softc {
65 	device_t	dev;
66 	struct mtx	sc_mtx;
67 	struct resource	*mem_res;
68 	struct resource *irq_res;
69 	struct cdev	*sc_ctl_dev;
70 	void		*intrhandle;
71 
72 	bus_dma_tag_t	dma_tag;
73 	bus_dmamap_t	dma_map;
74 
75 	int		is_open;
76 
77 	struct sysctl_ctx_list sysctl_tree;
78 	struct sysctl_oid *sysctl_tree_top;
79 };
80 
81 static struct zy7_devcfg_softc *zy7_devcfg_softc_p;
82 
83 #define	FCLK_NUM	4
84 
85 struct zy7_fclk_config {
86 	int		source;
87 	int		frequency;
88 	int		actual_frequency;
89 };
90 
91 static struct zy7_fclk_config fclk_configs[FCLK_NUM];
92 
93 #define DEVCFG_SC_LOCK(sc)		mtx_lock(&(sc)->sc_mtx)
94 #define	DEVCFG_SC_UNLOCK(sc)		mtx_unlock(&(sc)->sc_mtx)
95 #define DEVCFG_SC_LOCK_INIT(sc) \
96 	mtx_init(&(sc)->sc_mtx, device_get_nameunit((sc)->dev),	\
97 	    "zy7_devcfg", MTX_DEF)
98 #define DEVCFG_SC_LOCK_DESTROY(sc)	mtx_destroy(&(sc)->sc_mtx);
99 #define DEVCFG_SC_ASSERT_LOCKED(sc)	mtx_assert(&(sc)->sc_mtx, MA_OWNED);
100 
101 #define RD4(sc, off) 		(bus_read_4((sc)->mem_res, (off)))
102 #define WR4(sc, off, val) 	(bus_write_4((sc)->mem_res, (off), (val)))
103 
104 SYSCTL_NODE(_hw, OID_AUTO, fpga, CTLFLAG_RD, 0,	\
105 	    "Xilinx Zynq-7000 PL (FPGA) section");
106 
107 static int zy7_devcfg_sysctl_pl_done(SYSCTL_HANDLER_ARGS);
108 SYSCTL_PROC(_hw_fpga, OID_AUTO, pl_done, CTLTYPE_INT | CTLFLAG_RD, NULL, 0,
109 	    zy7_devcfg_sysctl_pl_done, "I", "PL section config DONE signal");
110 
111 static int zy7_en_level_shifters = 1;
112 SYSCTL_INT(_hw_fpga, OID_AUTO, en_level_shifters, CTLFLAG_RW,
113 	   &zy7_en_level_shifters, 0,
114 	   "Enable PS-PL level shifters after device config");
115 
116 static int zy7_ps_vers = 0;
117 SYSCTL_INT(_hw, OID_AUTO, ps_vers, CTLFLAG_RD, &zy7_ps_vers, 0,
118 	   "Zynq-7000 PS version");
119 
120 static int zy7_devcfg_fclk_sysctl_level_shifters(SYSCTL_HANDLER_ARGS);
121 SYSCTL_PROC(_hw_fpga, OID_AUTO, level_shifters,
122 		    CTLFLAG_RW | CTLTYPE_INT,
123 		    NULL, 0, zy7_devcfg_fclk_sysctl_level_shifters,
124 		    "I", "Enable/disable level shifters");
125 
126 /* cdev entry points. */
127 static int zy7_devcfg_open(struct cdev *, int, int, struct thread *);
128 static int zy7_devcfg_write(struct cdev *, struct uio *, int);
129 static int zy7_devcfg_close(struct cdev *, int, int, struct thread *);
130 
131 struct cdevsw zy7_devcfg_cdevsw = {
132 	.d_version =	D_VERSION,
133 	.d_open =	zy7_devcfg_open,
134 	.d_write =	zy7_devcfg_write,
135 	.d_close =	zy7_devcfg_close,
136 	.d_name =	"devcfg",
137 };
138 
139 /* Devcfg block registers. */
140 #define ZY7_DEVCFG_CTRL			0x0000
141 #define   ZY7_DEVCFG_CTRL_FORCE_RST		(1<<31)
142 #define   ZY7_DEVCFG_CTRL_PCFG_PROG_B		(1<<30)
143 #define   ZY7_DEVCFG_CTRL_PCFG_POR_CNT_4K	(1<<29)
144 #define   ZY7_DEVCFG_CTRL_PCAP_PR		(1<<27)
145 #define   ZY7_DEVCFG_CTRL_PCAP_MODE		(1<<26)
146 #define   ZY7_DEVCFG_CTRL_QTR_PCAP_RATE_EN	(1<<25)
147 #define   ZY7_DEVCFG_CTRL_MULTIBOOT_EN		(1<<24)
148 #define   ZY7_DEVCFG_CTRL_JTAG_CHAIN_DIS	(1<<23)
149 #define   ZY7_DEVCFG_CTRL_USER_MODE		(1<<15)
150 #define   ZY7_DEVCFG_CTRL_RESVD_WR11		(3<<13)	/* always write 11 */
151 #define   ZY7_DEVCFG_CTRL_PCFG_AES_FUSE		(1<<12)
152 #define   ZY7_DEVCFG_CTRL_PCFG_AES_EN_MASK	(7<<9)	/* all 1's or 0's */
153 #define   ZY7_DEVCFG_CTRL_SEU_EN		(1<<8)
154 #define   ZY7_DEVCFG_CTRL_SEC_EN		(1<<7)
155 #define   ZY7_DEVCFG_CTRL_SPNIDEN		(1<<6)
156 #define   ZY7_DEVCFG_CTRL_SPIDEN		(1<<5)
157 #define   ZY7_DEVCFG_CTRL_NIDEN			(1<<4)
158 #define   ZY7_DEVCFG_CTRL_DBGEN			(1<<3)
159 #define   ZY7_DEVCFG_CTRL_DAP_EN_MASK		(7<<0)	/* all 1's to enable */
160 
161 #define ZY7_DEVCFG_LOCK			0x004
162 #define   ZY7_DEVCFG_LOCK_AES_FUSE_LOCK		(1<<4)
163 #define   ZY7_DEVCFG_LOCK_AES_EN		(1<<3)
164 #define   ZY7_DEVCFG_LOCK_SEU_LOCK		(1<<2)
165 #define   ZY7_DEVCFG_LOCK_SEC_LOCK		(1<<1)
166 #define   ZY7_DEVCFG_LOCK_DBG_LOCK		(1<<0)
167 
168 #define ZY7_DEVCFG_CFG			0x008
169 #define   ZY7_DEVCFG_CFG_RFIFO_TH_MASK		(3<<10)
170 #define   ZY7_DEVCFG_CFG_WFIFO_TH_MASK		(3<<8)
171 #define   ZY7_DEVCFG_CFG_RCLK_EDGE		(1<<7)
172 #define   ZY7_DEVCFG_CFG_WCLK_EDGE		(1<<6)
173 #define   ZY7_DEVCFG_CFG_DIS_SRC_INC		(1<<5)
174 #define   ZY7_DEVCFG_CFG_DIS_DST_INC		(1<<4)
175 
176 #define ZY7_DEVCFG_INT_STATUS		0x00C
177 #define ZY7_DEVCFG_INT_MASK		0x010
178 #define   ZY7_DEVCFG_INT_PSS_GTS_USR_B		(1<<31)
179 #define   ZY7_DEVCFG_INT_PSS_FST_CFG_B		(1<<30)
180 #define   ZY7_DEVCFG_INT_PSS_GPWRDWN_B		(1<<29)
181 #define   ZY7_DEVCFG_INT_PSS_GTS_CFG_B		(1<<28)
182 #define   ZY7_DEVCFG_INT_CFG_RESET_B		(1<<27)
183 #define   ZY7_DEVCFG_INT_AXI_WTO		(1<<23)	/* axi write timeout */
184 #define   ZY7_DEVCFG_INT_AXI_WERR		(1<<22)	/* axi write err */
185 #define   ZY7_DEVCFG_INT_AXI_RTO		(1<<21)	/* axi read timeout */
186 #define   ZY7_DEVCFG_INT_AXI_RERR		(1<<20)	/* axi read err */
187 #define   ZY7_DEVCFG_INT_RX_FIFO_OV		(1<<18)	/* rx fifo overflow */
188 #define   ZY7_DEVCFG_INT_WR_FIFO_LVL		(1<<17)	/* wr fifo < level */
189 #define   ZY7_DEVCFG_INT_RD_FIFO_LVL		(1<<16)	/* rd fifo >= level */
190 #define   ZY7_DEVCFG_INT_DMA_CMD_ERR		(1<<15)
191 #define   ZY7_DEVCFG_INT_DMA_Q_OV		(1<<14)
192 #define   ZY7_DEVCFG_INT_DMA_DONE		(1<<13)
193 #define   ZY7_DEVCFG_INT_DMA_PCAP_DONE		(1<<12)
194 #define   ZY7_DEVCFG_INT_P2D_LEN_ERR		(1<<11)
195 #define   ZY7_DEVCFG_INT_PCFG_HMAC_ERR		(1<<6)
196 #define   ZY7_DEVCFG_INT_PCFG_SEU_ERR		(1<<5)
197 #define   ZY7_DEVCFG_INT_PCFG_POR_B		(1<<4)
198 #define   ZY7_DEVCFG_INT_PCFG_CFG_RST		(1<<3)
199 #define   ZY7_DEVCFG_INT_PCFG_DONE		(1<<2)
200 #define   ZY7_DEVCFG_INT_PCFG_INIT_PE		(1<<1)
201 #define   ZY7_DEVCFG_INT_PCFG_INIT_NE		(1<<0)
202 #define   ZY7_DEVCFG_INT_ERRORS			0x00f0f860
203 #define   ZY7_DEVCFG_INT_ALL			0xf8f7f87f
204 
205 #define ZY7_DEVCFG_STATUS		0x014
206 #define   ZY7_DEVCFG_STATUS_DMA_CMD_Q_F		(1<<31)	/* cmd queue full */
207 #define   ZY7_DEVCFG_STATUS_DMA_CMD_Q_E		(1<<30) /* cmd queue empty */
208 #define   ZY7_DEVCFG_STATUS_DONE_COUNT_MASK	(3<<28)
209 #define   ZY7_DEVCFG_STATUS_DONE_COUNT_SHIFT	28
210 #define   ZY7_DEVCFG_STATUS_RX_FIFO_LVL_MASK	(0x1f<<20)
211 #define   ZY7_DEVCFG_STATUS_RX_FIFO_LVL_SHIFT	20
212 #define   ZY7_DEVCFG_STATUS_TX_FIFO_LVL_MASK	(0x7f<<12)
213 #define   ZY7_DEVCFG_STATUS_TX_FIFO_LVL_SHIFT	12
214 #define   ZY7_DEVCFG_STATUS_PSS_GTS_USR_B	(1<<11)
215 #define   ZY7_DEVCFG_STATUS_PSS_FST_CFG_B	(1<<10)
216 #define   ZY7_DEVCFG_STATUS_PSS_GPWRDWN_B	(1<<9)
217 #define   ZY7_DEVCFG_STATUS_PSS_GTS_CFG_B	(1<<8)
218 #define   ZY7_DEVCFG_STATUS_ILL_APB_ACCE	(1<<6)
219 #define   ZY7_DEVCFG_STATUS_PSS_CFG_RESET_B	(1<<5)
220 #define   ZY7_DEVCFG_STATUS_PCFG_INIT		(1<<4)
221 #define   ZY7_DEVCFG_STATUS_EFUSE_BBRAM_KEY_DIS	(1<<3)
222 #define   ZY7_DEVCFG_STATUS_EFUSE_SEC_EN	(1<<2)
223 #define   ZY7_DEVCFG_STATUS_EFUSE_JTAG_DIS	(1<<1)
224 
225 #define ZY7_DEVCFG_DMA_SRC_ADDR		0x018
226 #define ZY7_DEVCFG_DMA_DST_ADDR		0x01c
227 #define   ZY7_DEVCFG_DMA_ADDR_WAIT_PCAP	1
228 #define   ZY7_DEVCFG_DMA_ADDR_ILLEGAL		0xffffffff
229 
230 #define ZY7_DEVCFG_DMA_SRC_LEN		0x020	/* in 4-byte words. */
231 #define ZY7_DEVCFG_DMA_SRC_LEN_MAX		0x7ffffff
232 #define ZY7_DEVCFG_DMA_DST_LEN		0x024
233 #define ZY7_DEVCFG_ROM_SHADOW		0x028
234 #define ZY7_DEVCFG_MULTIBOOT_ADDR	0x02c
235 #define ZY7_DEVCFG_SW_ID		0x030
236 #define ZY7_DEVCFG_UNLOCK		0x034
237 #define ZY7_DEVCFG_UNLOCK_MAGIC			0x757bdf0d
238 #define ZY7_DEVCFG_MCTRL		0x080
239 #define   ZY7_DEVCFG_MCTRL_PS_VERS_MASK		(0xf<<28)
240 #define   ZY7_DEVCFG_MCTRL_PS_VERS_SHIFT	28
241 #define   ZY7_DEVCFG_MCTRL_PCFG_POR_B		(1<<8)
242 #define   ZY7_DEVCFG_MCTRL_INT_PCAP_LPBK	(1<<4)
243 #define ZY7_DEVCFG_XADCIF_CFG		0x100
244 #define ZY7_DEVCFG_XADCIF_INT_STAT	0x104
245 #define ZY7_DEVCFG_XADCIF_INT_MASK	0x108
246 #define ZY7_DEVCFG_XADCIF_MSTS		0x10c
247 #define ZY7_DEVCFG_XADCIF_CMD_FIFO	0x110
248 #define ZY7_DEVCFG_XADCIF_RD_FIFO	0x114
249 #define ZY7_DEVCFG_XADCIF_MCTL		0x118
250 
251 static int
252 zy7_devcfg_fclk_sysctl_source(SYSCTL_HANDLER_ARGS)
253 {
254 	char buf[4];
255 	struct zy7_fclk_config *cfg;
256 	int unit;
257 	int error;
258 
259 	cfg = arg1;
260 	unit = arg2;
261 
262 	switch (cfg->source) {
263 		case ZY7_PL_FCLK_SRC_IO:
264 		case ZY7_PL_FCLK_SRC_IO_ALT:
265 			strncpy(buf, "IO", sizeof(buf));
266 			break;
267 		case ZY7_PL_FCLK_SRC_DDR:
268 			strncpy(buf, "DDR", sizeof(buf));
269 			break;
270 		case ZY7_PL_FCLK_SRC_ARM:
271 			strncpy(buf, "ARM", sizeof(buf));
272 			break;
273 		default:
274 			strncpy(buf, "???", sizeof(buf));
275 			break;
276 	}
277 
278 	error = sysctl_handle_string(oidp, buf, sizeof(buf), req);
279 	if (error != 0 || req->newptr == NULL)
280 		return (error);
281 
282 	if (strcasecmp(buf, "io") == 0)
283 		cfg->source = ZY7_PL_FCLK_SRC_IO;
284 	else if (strcasecmp(buf, "ddr") == 0)
285 		cfg->source = ZY7_PL_FCLK_SRC_DDR;
286 	else if (strcasecmp(buf, "arm") == 0)
287 		cfg->source = ZY7_PL_FCLK_SRC_ARM;
288 	else
289 		return (EINVAL);
290 
291 	zy7_pl_fclk_set_source(unit, cfg->source);
292 	if (cfg->frequency > 0)
293 		cfg->actual_frequency = zy7_pl_fclk_get_freq(unit);
294 
295 	return (0);
296 }
297 
298 static int
299 zy7_devcfg_fclk_sysctl_freq(SYSCTL_HANDLER_ARGS)
300 {
301 	struct zy7_fclk_config *cfg;
302 	int unit;
303 	int error;
304 	int freq;
305 	int new_actual_freq;
306 
307 	cfg = arg1;
308 	unit = arg2;
309 
310 	freq = cfg->frequency;
311 
312 	error = sysctl_handle_int(oidp, &freq, 0, req);
313 	if (error != 0 || req->newptr == NULL)
314 		return (error);
315 
316 	if (freq > 0) {
317 		new_actual_freq = zy7_pl_fclk_set_freq(unit, freq);
318 		if (new_actual_freq < 0)
319 			return (EINVAL);
320 		if (!zy7_pl_fclk_enabled(unit))
321 			zy7_pl_fclk_enable(unit);
322 	}
323 	else {
324 		zy7_pl_fclk_disable(unit);
325 		new_actual_freq = 0;
326 	}
327 
328 	cfg->frequency = freq;
329 	cfg->actual_frequency = new_actual_freq;
330 
331 	return (0);
332 }
333 
334 static int
335 zy7_devcfg_fclk_sysctl_level_shifters(SYSCTL_HANDLER_ARGS)
336 {
337 	int error, enabled;
338 
339 	enabled = zy7_pl_level_shifters_enabled();
340 
341 	error = sysctl_handle_int(oidp, &enabled, 0, req);
342 	if (error != 0 || req->newptr == NULL)
343 		return (error);
344 
345 	if (enabled)
346 		zy7_pl_level_shifters_enable();
347 	else
348 		zy7_pl_level_shifters_disable();
349 
350 	return (0);
351 }
352 
353 static int
354 zy7_devcfg_init_fclk_sysctl(struct zy7_devcfg_softc *sc)
355 {
356 	struct sysctl_oid *fclk_node;
357 	char fclk_num[4];
358 	int i;
359 
360 	sysctl_ctx_init(&sc->sysctl_tree);
361 	sc->sysctl_tree_top = SYSCTL_ADD_NODE(&sc->sysctl_tree,
362 	    SYSCTL_STATIC_CHILDREN(_hw_fpga), OID_AUTO, "fclk",
363 	    CTLFLAG_RD, 0, "");
364 	if (sc->sysctl_tree_top == NULL) {
365 		sysctl_ctx_free(&sc->sysctl_tree);
366 		return (-1);
367 	}
368 
369 	for (i = 0; i < FCLK_NUM; i++) {
370 		snprintf(fclk_num, sizeof(fclk_num), "%d", i);
371 		fclk_node = SYSCTL_ADD_NODE(&sc->sysctl_tree,
372 		    SYSCTL_CHILDREN(sc->sysctl_tree_top), OID_AUTO, fclk_num,
373 		    CTLFLAG_RD, 0, "");
374 
375 		SYSCTL_ADD_INT(&sc->sysctl_tree,
376 		    SYSCTL_CHILDREN(fclk_node), OID_AUTO,
377 		    "actual_freq", CTLFLAG_RD,
378 		    &fclk_configs[i].actual_frequency, i,
379 		    "Actual frequency");
380 		SYSCTL_ADD_PROC(&sc->sysctl_tree,
381 		    SYSCTL_CHILDREN(fclk_node), OID_AUTO,
382 		    "freq", CTLFLAG_RW | CTLTYPE_INT,
383 		    &fclk_configs[i], i,
384 		    zy7_devcfg_fclk_sysctl_freq,
385 		    "I", "Configured frequency");
386 		SYSCTL_ADD_PROC(&sc->sysctl_tree,
387 		    SYSCTL_CHILDREN(fclk_node), OID_AUTO,
388 		    "source", CTLFLAG_RW | CTLTYPE_STRING,
389 		    &fclk_configs[i], i,
390 		    zy7_devcfg_fclk_sysctl_source,
391 		    "A", "Clock source");
392 	}
393 
394 	return (0);
395 }
396 
397 /* Enable programming the PL through PCAP. */
398 static void
399 zy7_devcfg_init_hw(struct zy7_devcfg_softc *sc)
400 {
401 
402 	DEVCFG_SC_ASSERT_LOCKED(sc);
403 
404 	/* Set devcfg control register. */
405 	WR4(sc, ZY7_DEVCFG_CTRL,
406 	    ZY7_DEVCFG_CTRL_PCFG_PROG_B |
407 	    ZY7_DEVCFG_CTRL_PCAP_PR |
408 	    ZY7_DEVCFG_CTRL_PCAP_MODE |
409 	    ZY7_DEVCFG_CTRL_USER_MODE |
410 	    ZY7_DEVCFG_CTRL_RESVD_WR11 |
411 	    ZY7_DEVCFG_CTRL_SPNIDEN |
412 	    ZY7_DEVCFG_CTRL_SPIDEN |
413 	    ZY7_DEVCFG_CTRL_NIDEN |
414 	    ZY7_DEVCFG_CTRL_DBGEN |
415 	    ZY7_DEVCFG_CTRL_DAP_EN_MASK);
416 
417 	/* Turn off internal PCAP loopback. */
418 	WR4(sc, ZY7_DEVCFG_MCTRL, RD4(sc, ZY7_DEVCFG_MCTRL) &
419 	    ~ZY7_DEVCFG_MCTRL_INT_PCAP_LPBK);
420 }
421 
422 /* Clear previous configuration of the PL by asserting PROG_B. */
423 static int
424 zy7_devcfg_reset_pl(struct zy7_devcfg_softc *sc)
425 {
426 	uint32_t devcfg_ctl;
427 	int tries, err;
428 
429 	DEVCFG_SC_ASSERT_LOCKED(sc);
430 
431 	devcfg_ctl = RD4(sc, ZY7_DEVCFG_CTRL);
432 
433 	/* Clear sticky bits and set up INIT signal positive edge interrupt. */
434 	WR4(sc, ZY7_DEVCFG_INT_STATUS, ZY7_DEVCFG_INT_ALL);
435 	WR4(sc, ZY7_DEVCFG_INT_MASK, ~ZY7_DEVCFG_INT_PCFG_INIT_PE);
436 
437 	/* Deassert PROG_B (active low). */
438 	devcfg_ctl |= ZY7_DEVCFG_CTRL_PCFG_PROG_B;
439 	WR4(sc, ZY7_DEVCFG_CTRL, devcfg_ctl);
440 
441 	/*
442 	 * Wait for INIT to assert.  If it is already asserted, we may not get
443 	 * an edge interrupt so cancel it and continue.
444 	 */
445 	if ((RD4(sc, ZY7_DEVCFG_STATUS) &
446 	     ZY7_DEVCFG_STATUS_PCFG_INIT) != 0) {
447 		/* Already asserted.  Cancel interrupt. */
448 		WR4(sc, ZY7_DEVCFG_INT_MASK, ~0);
449 	}
450 	else {
451 		/* Wait for positive edge interrupt. */
452 		err = mtx_sleep(sc, &sc->sc_mtx, PCATCH, "zy7i1", hz);
453 		if (err != 0)
454 			return (err);
455 	}
456 
457 	/* Reassert PROG_B (active low). */
458 	devcfg_ctl &= ~ZY7_DEVCFG_CTRL_PCFG_PROG_B;
459 	WR4(sc, ZY7_DEVCFG_CTRL, devcfg_ctl);
460 
461 	/* Wait for INIT deasserted.  This happens almost instantly. */
462 	tries = 0;
463 	while ((RD4(sc, ZY7_DEVCFG_STATUS) &
464 		ZY7_DEVCFG_STATUS_PCFG_INIT) != 0) {
465 		if (++tries >= 100)
466 			return (EIO);
467 		DELAY(5);
468 	}
469 
470 	/* Clear sticky bits and set up INIT positive edge interrupt. */
471 	WR4(sc, ZY7_DEVCFG_INT_STATUS, ZY7_DEVCFG_INT_ALL);
472 	WR4(sc, ZY7_DEVCFG_INT_MASK, ~ZY7_DEVCFG_INT_PCFG_INIT_PE);
473 
474 	/* Deassert PROG_B again. */
475 	devcfg_ctl |= ZY7_DEVCFG_CTRL_PCFG_PROG_B;
476 	WR4(sc, ZY7_DEVCFG_CTRL, devcfg_ctl);
477 
478 	/*
479 	 * Wait for INIT asserted indicating FPGA internal initialization
480 	 * is complete.
481 	 */
482 	err = mtx_sleep(sc, &sc->sc_mtx, PCATCH, "zy7i2", hz);
483 	if (err != 0)
484 		return (err);
485 
486 	/* Clear sticky DONE bit in interrupt status. */
487 	WR4(sc, ZY7_DEVCFG_INT_STATUS, ZY7_DEVCFG_INT_ALL);
488 
489 	return (0);
490 }
491 
492 /* Callback function for bus_dmamap_load(). */
493 static void
494 zy7_dma_cb2(void *arg, bus_dma_segment_t *seg, int nsegs, int error)
495 {
496 	if (!error && nsegs == 1)
497 		*(bus_addr_t *)arg = seg[0].ds_addr;
498 }
499 
500 static int
501 zy7_devcfg_open(struct cdev *dev, int oflags, int devtype, struct thread *td)
502 {
503 	struct zy7_devcfg_softc *sc = dev->si_drv1;
504 	int err;
505 
506 	DEVCFG_SC_LOCK(sc);
507 	if (sc->is_open) {
508 		DEVCFG_SC_UNLOCK(sc);
509 		return (EBUSY);
510 	}
511 
512 	sc->dma_map = NULL;
513 	err = bus_dma_tag_create(bus_get_dma_tag(sc->dev), 4, 0,
514 				 BUS_SPACE_MAXADDR_32BIT,
515 				 BUS_SPACE_MAXADDR,
516 				 NULL, NULL,
517 				 PAGE_SIZE,
518 				 1,
519 				 PAGE_SIZE,
520 				 0,
521 				 busdma_lock_mutex,
522 				 &sc->sc_mtx,
523 				 &sc->dma_tag);
524 	if (err) {
525 		DEVCFG_SC_UNLOCK(sc);
526 		return (err);
527 	}
528 
529 	sc->is_open = 1;
530 	DEVCFG_SC_UNLOCK(sc);
531 	return (0);
532 }
533 
534 static int
535 zy7_devcfg_write(struct cdev *dev, struct uio *uio, int ioflag)
536 {
537 	struct zy7_devcfg_softc *sc = dev->si_drv1;
538 	void *dma_mem;
539 	bus_addr_t dma_physaddr;
540 	int segsz, err;
541 
542 	DEVCFG_SC_LOCK(sc);
543 
544 	/* First write?  Reset PL. */
545 	if (uio->uio_offset == 0 && uio->uio_resid > 0)	{
546 		zy7_devcfg_init_hw(sc);
547 		zy7_slcr_preload_pl();
548 		err = zy7_devcfg_reset_pl(sc);
549 		if (err != 0) {
550 			DEVCFG_SC_UNLOCK(sc);
551 			return (err);
552 		}
553 	}
554 
555 	/* Allocate dma memory and load. */
556 	err = bus_dmamem_alloc(sc->dma_tag, &dma_mem, BUS_DMA_NOWAIT,
557 			       &sc->dma_map);
558 	if (err != 0) {
559 		DEVCFG_SC_UNLOCK(sc);
560 		return (err);
561 	}
562 	err = bus_dmamap_load(sc->dma_tag, sc->dma_map, dma_mem, PAGE_SIZE,
563 			      zy7_dma_cb2, &dma_physaddr, 0);
564 	if (err != 0) {
565 		bus_dmamem_free(sc->dma_tag, dma_mem, sc->dma_map);
566 		DEVCFG_SC_UNLOCK(sc);
567 		return (err);
568 	}
569 
570 	while (uio->uio_resid > 0) {
571 		/* If DONE signal has been set, we shouldn't write anymore. */
572 		if ((RD4(sc, ZY7_DEVCFG_INT_STATUS) &
573 		     ZY7_DEVCFG_INT_PCFG_DONE) != 0) {
574 			err = EIO;
575 			break;
576 		}
577 
578 		/* uiomove the data from user buffer to our dma map. */
579 		segsz = MIN(PAGE_SIZE, uio->uio_resid);
580 		DEVCFG_SC_UNLOCK(sc);
581 		err = uiomove(dma_mem, segsz, uio);
582 		DEVCFG_SC_LOCK(sc);
583 		if (err != 0)
584 			break;
585 
586 		/* Flush the cache to memory. */
587 		bus_dmamap_sync(sc->dma_tag, sc->dma_map,
588 				BUS_DMASYNC_PREWRITE);
589 
590 		/* Program devcfg's DMA engine.  The ordering of these
591 		 * register writes is critical.
592 		 */
593 		if (uio->uio_resid > segsz)
594 			WR4(sc, ZY7_DEVCFG_DMA_SRC_ADDR,
595 			    (uint32_t) dma_physaddr);
596 		else
597 			WR4(sc, ZY7_DEVCFG_DMA_SRC_ADDR,
598 			    (uint32_t) dma_physaddr |
599 			    ZY7_DEVCFG_DMA_ADDR_WAIT_PCAP);
600 		WR4(sc, ZY7_DEVCFG_DMA_DST_ADDR, ZY7_DEVCFG_DMA_ADDR_ILLEGAL);
601 		WR4(sc, ZY7_DEVCFG_DMA_SRC_LEN, (segsz+3)/4);
602 		WR4(sc, ZY7_DEVCFG_DMA_DST_LEN, 0);
603 
604 		/* Now clear done bit and set up DMA done interrupt. */
605 		WR4(sc, ZY7_DEVCFG_INT_STATUS, ZY7_DEVCFG_INT_ALL);
606 		WR4(sc, ZY7_DEVCFG_INT_MASK, ~ZY7_DEVCFG_INT_DMA_DONE);
607 
608 		/* Wait for DMA done interrupt. */
609 		err = mtx_sleep(sc->dma_map, &sc->sc_mtx, PCATCH,
610 				"zy7dma", hz);
611 		if (err != 0)
612 			break;
613 
614 		bus_dmamap_sync(sc->dma_tag, sc->dma_map,
615 				BUS_DMASYNC_POSTWRITE);
616 
617 		/* Check DONE signal. */
618 		if ((RD4(sc, ZY7_DEVCFG_INT_STATUS) &
619 		     ZY7_DEVCFG_INT_PCFG_DONE) != 0)
620 			zy7_slcr_postload_pl(zy7_en_level_shifters);
621 	}
622 
623 	bus_dmamap_unload(sc->dma_tag, sc->dma_map);
624 	bus_dmamem_free(sc->dma_tag, dma_mem, sc->dma_map);
625 	DEVCFG_SC_UNLOCK(sc);
626 	return (err);
627 }
628 
629 static int
630 zy7_devcfg_close(struct cdev *dev, int fflag, int devtype, struct thread *td)
631 {
632 	struct zy7_devcfg_softc *sc = dev->si_drv1;
633 
634 	DEVCFG_SC_LOCK(sc);
635 	sc->is_open = 0;
636 	bus_dma_tag_destroy(sc->dma_tag);
637 	DEVCFG_SC_UNLOCK(sc);
638 
639 	zy7_slcr_postload_pl(zy7_en_level_shifters);
640 
641 	return (0);
642 }
643 
644 static void
645 zy7_devcfg_intr(void *arg)
646 {
647 	struct zy7_devcfg_softc *sc = (struct zy7_devcfg_softc *)arg;
648 	uint32_t istatus, imask;
649 
650 	DEVCFG_SC_LOCK(sc);
651 
652 	istatus = RD4(sc, ZY7_DEVCFG_INT_STATUS);
653 	imask = ~RD4(sc, ZY7_DEVCFG_INT_MASK);
654 
655 	/* Turn interrupt off. */
656 	WR4(sc, ZY7_DEVCFG_INT_MASK, ~0);
657 
658 	if ((istatus & imask) == 0) {
659 		DEVCFG_SC_UNLOCK(sc);
660 		return;
661 	}
662 
663 	/* DMA done? */
664 	if ((istatus & ZY7_DEVCFG_INT_DMA_DONE) != 0)
665 		wakeup(sc->dma_map);
666 
667 	/* INIT_B positive edge? */
668 	if ((istatus & ZY7_DEVCFG_INT_PCFG_INIT_PE) != 0)
669 		wakeup(sc);
670 
671 	DEVCFG_SC_UNLOCK(sc);
672 }
673 
674 /* zy7_devcfg_sysctl_pl_done() returns status of the PL_DONE signal.
675  */
676 static int
677 zy7_devcfg_sysctl_pl_done(SYSCTL_HANDLER_ARGS)
678 {
679 	struct zy7_devcfg_softc *sc = zy7_devcfg_softc_p;
680 	int pl_done = 0;
681 
682 	if (sc) {
683 		DEVCFG_SC_LOCK(sc);
684 
685 		/* PCFG_DONE bit is sticky.  Clear it before checking it. */
686 		WR4(sc, ZY7_DEVCFG_INT_STATUS, ZY7_DEVCFG_INT_PCFG_DONE);
687 		pl_done = ((RD4(sc, ZY7_DEVCFG_INT_STATUS) &
688 			    ZY7_DEVCFG_INT_PCFG_DONE) != 0);
689 
690 		DEVCFG_SC_UNLOCK(sc);
691 	}
692 	return (sysctl_handle_int(oidp, &pl_done, 0, req));
693 }
694 
695 static int
696 zy7_devcfg_probe(device_t dev)
697 {
698 
699 	if (!ofw_bus_status_okay(dev))
700 		return (ENXIO);
701 
702 	if (!ofw_bus_is_compatible(dev, "xlnx,zy7_devcfg"))
703 		return (ENXIO);
704 
705 	device_set_desc(dev, "Zynq devcfg block");
706 	return (0);
707 }
708 
709 static int zy7_devcfg_detach(device_t dev);
710 
711 static int
712 zy7_devcfg_attach(device_t dev)
713 {
714 	struct zy7_devcfg_softc *sc = device_get_softc(dev);
715 	int i;
716 	int rid, err;
717 
718 	/* Allow only one attach. */
719 	if (zy7_devcfg_softc_p != NULL)
720 		return (ENXIO);
721 
722 	sc->dev = dev;
723 
724 	DEVCFG_SC_LOCK_INIT(sc);
725 
726 	/* Get memory resource. */
727 	rid = 0;
728 	sc->mem_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid,
729 					     RF_ACTIVE);
730 	if (sc->mem_res == NULL) {
731 		device_printf(dev, "could not allocate memory resources.\n");
732 		zy7_devcfg_detach(dev);
733 		return (ENOMEM);
734 	}
735 
736 	/* Allocate IRQ. */
737 	rid = 0;
738 	sc->irq_res = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid,
739 					     RF_ACTIVE);
740 	if (sc->irq_res == NULL) {
741 		device_printf(dev, "cannot allocate IRQ\n");
742 		zy7_devcfg_detach(dev);
743 		return (ENOMEM);
744 	}
745 
746 	/* Activate the interrupt. */
747 	err = bus_setup_intr(dev, sc->irq_res, INTR_TYPE_MISC | INTR_MPSAFE,
748 			     NULL, zy7_devcfg_intr, sc, &sc->intrhandle);
749 	if (err) {
750 		device_printf(dev, "cannot setup IRQ\n");
751 		zy7_devcfg_detach(dev);
752 		return (err);
753 	}
754 
755 	/* Create /dev/devcfg */
756 	sc->sc_ctl_dev = make_dev(&zy7_devcfg_cdevsw, 0,
757 			  UID_ROOT, GID_WHEEL, 0600, "devcfg");
758 	if (sc->sc_ctl_dev == NULL) {
759 		device_printf(dev, "failed to create /dev/devcfg");
760 		zy7_devcfg_detach(dev);
761 		return (ENXIO);
762 	}
763 	sc->sc_ctl_dev->si_drv1 = sc;
764 
765 	zy7_devcfg_softc_p = sc;
766 
767 	/* Unlock devcfg registers. */
768 	WR4(sc, ZY7_DEVCFG_UNLOCK, ZY7_DEVCFG_UNLOCK_MAGIC);
769 
770 	/* Make sure interrupts are completely disabled. */
771 	WR4(sc, ZY7_DEVCFG_INT_STATUS, ZY7_DEVCFG_INT_ALL);
772 	WR4(sc, ZY7_DEVCFG_INT_MASK, 0xffffffff);
773 
774 	/* Get PS_VERS for SYSCTL. */
775 	zy7_ps_vers = (RD4(sc, ZY7_DEVCFG_MCTRL) &
776 		       ZY7_DEVCFG_MCTRL_PS_VERS_MASK) >>
777 		ZY7_DEVCFG_MCTRL_PS_VERS_SHIFT;
778 
779 	for (i = 0; i < FCLK_NUM; i++) {
780 		fclk_configs[i].source = zy7_pl_fclk_get_source(i);
781 		fclk_configs[i].actual_frequency =
782 			zy7_pl_fclk_enabled(i) ? zy7_pl_fclk_get_freq(i) : 0;
783 		/* Initially assume actual frequency is the configure one */
784 		fclk_configs[i].frequency = fclk_configs[i].actual_frequency;
785 	}
786 
787 	if (zy7_devcfg_init_fclk_sysctl(sc) < 0)
788 		device_printf(dev, "failed to initialized sysctl tree\n");
789 
790 	return (0);
791 }
792 
793 static int
794 zy7_devcfg_detach(device_t dev)
795 {
796 	struct zy7_devcfg_softc *sc = device_get_softc(dev);
797 
798 	if (sc->sysctl_tree_top != NULL) {
799 		sysctl_ctx_free(&sc->sysctl_tree);
800 		sc->sysctl_tree_top = NULL;
801 	}
802 
803 	if (device_is_attached(dev))
804 		bus_generic_detach(dev);
805 
806 	/* Get rid of /dev/devcfg0. */
807 	if (sc->sc_ctl_dev != NULL)
808 		destroy_dev(sc->sc_ctl_dev);
809 
810 	/* Teardown and release interrupt. */
811 	if (sc->irq_res != NULL) {
812 		if (sc->intrhandle)
813 			bus_teardown_intr(dev, sc->irq_res, sc->intrhandle);
814 		bus_release_resource(dev, SYS_RES_IRQ,
815 			     rman_get_rid(sc->irq_res), sc->irq_res);
816 	}
817 
818 	/* Release memory resource. */
819 	if (sc->mem_res != NULL)
820 		bus_release_resource(dev, SYS_RES_MEMORY,
821 			     rman_get_rid(sc->mem_res), sc->mem_res);
822 
823 	zy7_devcfg_softc_p = NULL;
824 
825 	DEVCFG_SC_LOCK_DESTROY(sc);
826 
827 	return (0);
828 }
829 
830 static device_method_t zy7_devcfg_methods[] = {
831 	/* device_if */
832 	DEVMETHOD(device_probe, 	zy7_devcfg_probe),
833 	DEVMETHOD(device_attach, 	zy7_devcfg_attach),
834 	DEVMETHOD(device_detach, 	zy7_devcfg_detach),
835 
836 	DEVMETHOD_END
837 };
838 
839 static driver_t zy7_devcfg_driver = {
840 	"zy7_devcfg",
841 	zy7_devcfg_methods,
842 	sizeof(struct zy7_devcfg_softc),
843 };
844 static devclass_t zy7_devcfg_devclass;
845 
846 DRIVER_MODULE(zy7_devcfg, simplebus, zy7_devcfg_driver, zy7_devcfg_devclass, \
847 	      0, 0);
848 MODULE_DEPEND(zy7_devcfg, zy7_slcr, 1, 1, 1);
849