xref: /freebsd/sys/arm/xilinx/zy7_devcfg.c (revision c8e7f78a3d28ff6e6223ed136ada8e1e2f34965e)
1 /*-
2  * SPDX-License-Identifier: BSD-2-Clause
3  *
4  * Copyright (c) 2013 Thomas Skibo
5  * All rights reserved.
6  *
7  * Redistribution and use in source and binary forms, with or without
8  * modification, are permitted provided that the following conditions
9  * are met:
10  * 1. Redistributions of source code must retain the above copyright
11  *    notice, this list of conditions and the following disclaimer.
12  * 2. Redistributions in binary form must reproduce the above copyright
13  *    notice, this list of conditions and the following disclaimer in the
14  *    documentation and/or other materials provided with the distribution.
15  *
16  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
17  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
18  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
19  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
20  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
21  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
22  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
23  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
24  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
25  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
26  * SUCH DAMAGE.
27  */
28 
29 /*
30  * Zynq-7000 Devcfg driver.  This allows programming the PL (FPGA) section
31  * of Zynq.
32  *
33  * Reference: Zynq-7000 All Programmable SoC Technical Reference Manual.
34  * (v1.4) November 16, 2012.  Xilinx doc UG585.  PL Configuration is
35  * covered in section 6.4.5.
36  */
37 
38 #include <sys/param.h>
39 #include <sys/systm.h>
40 #include <sys/conf.h>
41 #include <sys/kernel.h>
42 #include <sys/module.h>
43 #include <sys/sysctl.h>
44 #include <sys/lock.h>
45 #include <sys/mutex.h>
46 #include <sys/resource.h>
47 #include <sys/rman.h>
48 #include <sys/uio.h>
49 
50 #include <machine/bus.h>
51 #include <machine/resource.h>
52 #include <machine/stdarg.h>
53 
54 #include <dev/ofw/ofw_bus.h>
55 #include <dev/ofw/ofw_bus_subr.h>
56 
57 #include <arm/xilinx/zy7_slcr.h>
58 
59 struct zy7_devcfg_softc {
60 	device_t	dev;
61 	struct mtx	sc_mtx;
62 	struct resource	*mem_res;
63 	struct resource *irq_res;
64 	struct cdev	*sc_ctl_dev;
65 	void		*intrhandle;
66 
67 	bus_dma_tag_t	dma_tag;
68 	bus_dmamap_t	dma_map;
69 
70 	int		is_open;
71 
72 	struct sysctl_ctx_list sysctl_tree;
73 	struct sysctl_oid *sysctl_tree_top;
74 };
75 
76 static struct zy7_devcfg_softc *zy7_devcfg_softc_p;
77 
78 #define	FCLK_NUM	4
79 
80 struct zy7_fclk_config {
81 	int		source;
82 	int		frequency;
83 	int		actual_frequency;
84 };
85 
86 static struct zy7_fclk_config fclk_configs[FCLK_NUM];
87 
88 #define DEVCFG_SC_LOCK(sc)		mtx_lock(&(sc)->sc_mtx)
89 #define	DEVCFG_SC_UNLOCK(sc)		mtx_unlock(&(sc)->sc_mtx)
90 #define DEVCFG_SC_LOCK_INIT(sc) \
91 	mtx_init(&(sc)->sc_mtx, device_get_nameunit((sc)->dev),	\
92 	    "zy7_devcfg", MTX_DEF)
93 #define DEVCFG_SC_LOCK_DESTROY(sc)	mtx_destroy(&(sc)->sc_mtx);
94 #define DEVCFG_SC_ASSERT_LOCKED(sc)	mtx_assert(&(sc)->sc_mtx, MA_OWNED);
95 
96 #define RD4(sc, off) 		(bus_read_4((sc)->mem_res, (off)))
97 #define WR4(sc, off, val) 	(bus_write_4((sc)->mem_res, (off), (val)))
98 
99 SYSCTL_NODE(_hw, OID_AUTO, fpga, CTLFLAG_RD | CTLFLAG_MPSAFE, 0,
100     "Xilinx Zynq-7000 PL (FPGA) section");
101 
102 static int zy7_devcfg_sysctl_pl_done(SYSCTL_HANDLER_ARGS);
103 SYSCTL_PROC(_hw_fpga, OID_AUTO, pl_done,
104     CTLTYPE_INT | CTLFLAG_RD | CTLFLAG_NEEDGIANT, NULL, 0,
105     zy7_devcfg_sysctl_pl_done, "I",
106     "PL section config DONE signal");
107 
108 static int zy7_en_level_shifters = 1;
109 SYSCTL_INT(_hw_fpga, OID_AUTO, en_level_shifters, CTLFLAG_RW,
110 	   &zy7_en_level_shifters, 0,
111 	   "Enable PS-PL level shifters after device config");
112 
113 static int zy7_ps_vers = 0;
114 SYSCTL_INT(_hw, OID_AUTO, ps_vers, CTLFLAG_RD, &zy7_ps_vers, 0,
115 	   "Zynq-7000 PS version");
116 
117 static int zy7_devcfg_fclk_sysctl_level_shifters(SYSCTL_HANDLER_ARGS);
118 SYSCTL_PROC(_hw_fpga, OID_AUTO, level_shifters,
119     CTLFLAG_RW | CTLTYPE_INT | CTLFLAG_NEEDGIANT, NULL, 0,
120     zy7_devcfg_fclk_sysctl_level_shifters, "I",
121     "Enable/disable level shifters");
122 
123 /* cdev entry points. */
124 static int zy7_devcfg_open(struct cdev *, int, int, struct thread *);
125 static int zy7_devcfg_write(struct cdev *, struct uio *, int);
126 static int zy7_devcfg_close(struct cdev *, int, int, struct thread *);
127 
128 struct cdevsw zy7_devcfg_cdevsw = {
129 	.d_version =	D_VERSION,
130 	.d_open =	zy7_devcfg_open,
131 	.d_write =	zy7_devcfg_write,
132 	.d_close =	zy7_devcfg_close,
133 	.d_name =	"devcfg",
134 };
135 
136 /* Devcfg block registers. */
137 #define ZY7_DEVCFG_CTRL			0x0000
138 #define   ZY7_DEVCFG_CTRL_FORCE_RST		(1<<31)
139 #define   ZY7_DEVCFG_CTRL_PCFG_PROG_B		(1<<30)
140 #define   ZY7_DEVCFG_CTRL_PCFG_POR_CNT_4K	(1<<29)
141 #define   ZY7_DEVCFG_CTRL_PCAP_PR		(1<<27)
142 #define   ZY7_DEVCFG_CTRL_PCAP_MODE		(1<<26)
143 #define   ZY7_DEVCFG_CTRL_QTR_PCAP_RATE_EN	(1<<25)
144 #define   ZY7_DEVCFG_CTRL_MULTIBOOT_EN		(1<<24)
145 #define   ZY7_DEVCFG_CTRL_JTAG_CHAIN_DIS	(1<<23)
146 #define   ZY7_DEVCFG_CTRL_USER_MODE		(1<<15)
147 #define   ZY7_DEVCFG_CTRL_RESVD_WR11		(3<<13)	/* always write 11 */
148 #define   ZY7_DEVCFG_CTRL_PCFG_AES_FUSE		(1<<12)
149 #define   ZY7_DEVCFG_CTRL_PCFG_AES_EN_MASK	(7<<9)	/* all 1's or 0's */
150 #define   ZY7_DEVCFG_CTRL_SEU_EN		(1<<8)
151 #define   ZY7_DEVCFG_CTRL_SEC_EN		(1<<7)
152 #define   ZY7_DEVCFG_CTRL_SPNIDEN		(1<<6)
153 #define   ZY7_DEVCFG_CTRL_SPIDEN		(1<<5)
154 #define   ZY7_DEVCFG_CTRL_NIDEN			(1<<4)
155 #define   ZY7_DEVCFG_CTRL_DBGEN			(1<<3)
156 #define   ZY7_DEVCFG_CTRL_DAP_EN_MASK		(7<<0)	/* all 1's to enable */
157 
158 #define ZY7_DEVCFG_LOCK			0x004
159 #define   ZY7_DEVCFG_LOCK_AES_FUSE_LOCK		(1<<4)
160 #define   ZY7_DEVCFG_LOCK_AES_EN		(1<<3)
161 #define   ZY7_DEVCFG_LOCK_SEU_LOCK		(1<<2)
162 #define   ZY7_DEVCFG_LOCK_SEC_LOCK		(1<<1)
163 #define   ZY7_DEVCFG_LOCK_DBG_LOCK		(1<<0)
164 
165 #define ZY7_DEVCFG_CFG			0x008
166 #define   ZY7_DEVCFG_CFG_RFIFO_TH_MASK		(3<<10)
167 #define   ZY7_DEVCFG_CFG_WFIFO_TH_MASK		(3<<8)
168 #define   ZY7_DEVCFG_CFG_RCLK_EDGE		(1<<7)
169 #define   ZY7_DEVCFG_CFG_WCLK_EDGE		(1<<6)
170 #define   ZY7_DEVCFG_CFG_DIS_SRC_INC		(1<<5)
171 #define   ZY7_DEVCFG_CFG_DIS_DST_INC		(1<<4)
172 
173 #define ZY7_DEVCFG_INT_STATUS		0x00C
174 #define ZY7_DEVCFG_INT_MASK		0x010
175 #define   ZY7_DEVCFG_INT_PSS_GTS_USR_B		(1<<31)
176 #define   ZY7_DEVCFG_INT_PSS_FST_CFG_B		(1<<30)
177 #define   ZY7_DEVCFG_INT_PSS_GPWRDWN_B		(1<<29)
178 #define   ZY7_DEVCFG_INT_PSS_GTS_CFG_B		(1<<28)
179 #define   ZY7_DEVCFG_INT_CFG_RESET_B		(1<<27)
180 #define   ZY7_DEVCFG_INT_AXI_WTO		(1<<23)	/* axi write timeout */
181 #define   ZY7_DEVCFG_INT_AXI_WERR		(1<<22)	/* axi write err */
182 #define   ZY7_DEVCFG_INT_AXI_RTO		(1<<21)	/* axi read timeout */
183 #define   ZY7_DEVCFG_INT_AXI_RERR		(1<<20)	/* axi read err */
184 #define   ZY7_DEVCFG_INT_RX_FIFO_OV		(1<<18)	/* rx fifo overflow */
185 #define   ZY7_DEVCFG_INT_WR_FIFO_LVL		(1<<17)	/* wr fifo < level */
186 #define   ZY7_DEVCFG_INT_RD_FIFO_LVL		(1<<16)	/* rd fifo >= level */
187 #define   ZY7_DEVCFG_INT_DMA_CMD_ERR		(1<<15)
188 #define   ZY7_DEVCFG_INT_DMA_Q_OV		(1<<14)
189 #define   ZY7_DEVCFG_INT_DMA_DONE		(1<<13)
190 #define   ZY7_DEVCFG_INT_DMA_PCAP_DONE		(1<<12)
191 #define   ZY7_DEVCFG_INT_P2D_LEN_ERR		(1<<11)
192 #define   ZY7_DEVCFG_INT_PCFG_HMAC_ERR		(1<<6)
193 #define   ZY7_DEVCFG_INT_PCFG_SEU_ERR		(1<<5)
194 #define   ZY7_DEVCFG_INT_PCFG_POR_B		(1<<4)
195 #define   ZY7_DEVCFG_INT_PCFG_CFG_RST		(1<<3)
196 #define   ZY7_DEVCFG_INT_PCFG_DONE		(1<<2)
197 #define   ZY7_DEVCFG_INT_PCFG_INIT_PE		(1<<1)
198 #define   ZY7_DEVCFG_INT_PCFG_INIT_NE		(1<<0)
199 #define   ZY7_DEVCFG_INT_ERRORS			0x00f0f860
200 #define   ZY7_DEVCFG_INT_ALL			0xf8f7f87f
201 
202 #define ZY7_DEVCFG_STATUS		0x014
203 #define   ZY7_DEVCFG_STATUS_DMA_CMD_Q_F		(1<<31)	/* cmd queue full */
204 #define   ZY7_DEVCFG_STATUS_DMA_CMD_Q_E		(1<<30) /* cmd queue empty */
205 #define   ZY7_DEVCFG_STATUS_DONE_COUNT_MASK	(3<<28)
206 #define   ZY7_DEVCFG_STATUS_DONE_COUNT_SHIFT	28
207 #define   ZY7_DEVCFG_STATUS_RX_FIFO_LVL_MASK	(0x1f<<20)
208 #define   ZY7_DEVCFG_STATUS_RX_FIFO_LVL_SHIFT	20
209 #define   ZY7_DEVCFG_STATUS_TX_FIFO_LVL_MASK	(0x7f<<12)
210 #define   ZY7_DEVCFG_STATUS_TX_FIFO_LVL_SHIFT	12
211 #define   ZY7_DEVCFG_STATUS_PSS_GTS_USR_B	(1<<11)
212 #define   ZY7_DEVCFG_STATUS_PSS_FST_CFG_B	(1<<10)
213 #define   ZY7_DEVCFG_STATUS_PSS_GPWRDWN_B	(1<<9)
214 #define   ZY7_DEVCFG_STATUS_PSS_GTS_CFG_B	(1<<8)
215 #define   ZY7_DEVCFG_STATUS_ILL_APB_ACCE	(1<<6)
216 #define   ZY7_DEVCFG_STATUS_PSS_CFG_RESET_B	(1<<5)
217 #define   ZY7_DEVCFG_STATUS_PCFG_INIT		(1<<4)
218 #define   ZY7_DEVCFG_STATUS_EFUSE_BBRAM_KEY_DIS	(1<<3)
219 #define   ZY7_DEVCFG_STATUS_EFUSE_SEC_EN	(1<<2)
220 #define   ZY7_DEVCFG_STATUS_EFUSE_JTAG_DIS	(1<<1)
221 
222 #define ZY7_DEVCFG_DMA_SRC_ADDR		0x018
223 #define ZY7_DEVCFG_DMA_DST_ADDR		0x01c
224 #define   ZY7_DEVCFG_DMA_ADDR_WAIT_PCAP	1
225 #define   ZY7_DEVCFG_DMA_ADDR_ILLEGAL		0xffffffff
226 
227 #define ZY7_DEVCFG_DMA_SRC_LEN		0x020	/* in 4-byte words. */
228 #define ZY7_DEVCFG_DMA_SRC_LEN_MAX		0x7ffffff
229 #define ZY7_DEVCFG_DMA_DST_LEN		0x024
230 #define ZY7_DEVCFG_ROM_SHADOW		0x028
231 #define ZY7_DEVCFG_MULTIBOOT_ADDR	0x02c
232 #define ZY7_DEVCFG_SW_ID		0x030
233 #define ZY7_DEVCFG_UNLOCK		0x034
234 #define ZY7_DEVCFG_UNLOCK_MAGIC			0x757bdf0d
235 #define ZY7_DEVCFG_MCTRL		0x080
236 #define   ZY7_DEVCFG_MCTRL_PS_VERS_MASK		(0xf<<28)
237 #define   ZY7_DEVCFG_MCTRL_PS_VERS_SHIFT	28
238 #define   ZY7_DEVCFG_MCTRL_PCFG_POR_B		(1<<8)
239 #define   ZY7_DEVCFG_MCTRL_INT_PCAP_LPBK	(1<<4)
240 #define ZY7_DEVCFG_XADCIF_CFG		0x100
241 #define ZY7_DEVCFG_XADCIF_INT_STAT	0x104
242 #define ZY7_DEVCFG_XADCIF_INT_MASK	0x108
243 #define ZY7_DEVCFG_XADCIF_MSTS		0x10c
244 #define ZY7_DEVCFG_XADCIF_CMD_FIFO	0x110
245 #define ZY7_DEVCFG_XADCIF_RD_FIFO	0x114
246 #define ZY7_DEVCFG_XADCIF_MCTL		0x118
247 
248 static int
249 zy7_devcfg_fclk_sysctl_source(SYSCTL_HANDLER_ARGS)
250 {
251 	char buf[4];
252 	struct zy7_fclk_config *cfg;
253 	int unit;
254 	int error;
255 
256 	cfg = arg1;
257 	unit = arg2;
258 
259 	switch (cfg->source) {
260 		case ZY7_PL_FCLK_SRC_IO:
261 		case ZY7_PL_FCLK_SRC_IO_ALT:
262 			strncpy(buf, "IO", sizeof(buf));
263 			break;
264 		case ZY7_PL_FCLK_SRC_DDR:
265 			strncpy(buf, "DDR", sizeof(buf));
266 			break;
267 		case ZY7_PL_FCLK_SRC_ARM:
268 			strncpy(buf, "ARM", sizeof(buf));
269 			break;
270 		default:
271 			strncpy(buf, "???", sizeof(buf));
272 			break;
273 	}
274 
275 	error = sysctl_handle_string(oidp, buf, sizeof(buf), req);
276 	if (error != 0 || req->newptr == NULL)
277 		return (error);
278 
279 	if (strcasecmp(buf, "io") == 0)
280 		cfg->source = ZY7_PL_FCLK_SRC_IO;
281 	else if (strcasecmp(buf, "ddr") == 0)
282 		cfg->source = ZY7_PL_FCLK_SRC_DDR;
283 	else if (strcasecmp(buf, "arm") == 0)
284 		cfg->source = ZY7_PL_FCLK_SRC_ARM;
285 	else
286 		return (EINVAL);
287 
288 	zy7_pl_fclk_set_source(unit, cfg->source);
289 	if (cfg->frequency > 0)
290 		cfg->actual_frequency = zy7_pl_fclk_get_freq(unit);
291 
292 	return (0);
293 }
294 
295 static int
296 zy7_devcfg_fclk_sysctl_freq(SYSCTL_HANDLER_ARGS)
297 {
298 	struct zy7_fclk_config *cfg;
299 	int unit;
300 	int error;
301 	int freq;
302 	int new_actual_freq;
303 
304 	cfg = arg1;
305 	unit = arg2;
306 
307 	freq = cfg->frequency;
308 
309 	error = sysctl_handle_int(oidp, &freq, 0, req);
310 	if (error != 0 || req->newptr == NULL)
311 		return (error);
312 
313 	if (freq > 0) {
314 		new_actual_freq = zy7_pl_fclk_set_freq(unit, freq);
315 		if (new_actual_freq < 0)
316 			return (EINVAL);
317 		if (!zy7_pl_fclk_enabled(unit))
318 			zy7_pl_fclk_enable(unit);
319 	}
320 	else {
321 		zy7_pl_fclk_disable(unit);
322 		new_actual_freq = 0;
323 	}
324 
325 	cfg->frequency = freq;
326 	cfg->actual_frequency = new_actual_freq;
327 
328 	return (0);
329 }
330 
331 static int
332 zy7_devcfg_fclk_sysctl_level_shifters(SYSCTL_HANDLER_ARGS)
333 {
334 	int error, enabled;
335 
336 	enabled = zy7_pl_level_shifters_enabled();
337 
338 	error = sysctl_handle_int(oidp, &enabled, 0, req);
339 	if (error != 0 || req->newptr == NULL)
340 		return (error);
341 
342 	if (enabled)
343 		zy7_pl_level_shifters_enable();
344 	else
345 		zy7_pl_level_shifters_disable();
346 
347 	return (0);
348 }
349 
350 static int
351 zy7_devcfg_init_fclk_sysctl(struct zy7_devcfg_softc *sc)
352 {
353 	struct sysctl_oid *fclk_node;
354 	char fclk_num[4];
355 	int i;
356 
357 	sysctl_ctx_init(&sc->sysctl_tree);
358 	sc->sysctl_tree_top = SYSCTL_ADD_NODE(&sc->sysctl_tree,
359 	    SYSCTL_STATIC_CHILDREN(_hw_fpga), OID_AUTO, "fclk",
360 	    CTLFLAG_RD | CTLFLAG_MPSAFE, 0, "");
361 	if (sc->sysctl_tree_top == NULL) {
362 		sysctl_ctx_free(&sc->sysctl_tree);
363 		return (-1);
364 	}
365 
366 	for (i = 0; i < FCLK_NUM; i++) {
367 		snprintf(fclk_num, sizeof(fclk_num), "%d", i);
368 		fclk_node = SYSCTL_ADD_NODE(&sc->sysctl_tree,
369 		    SYSCTL_CHILDREN(sc->sysctl_tree_top), OID_AUTO, fclk_num,
370 		    CTLFLAG_RD | CTLFLAG_MPSAFE, 0, "");
371 
372 		SYSCTL_ADD_INT(&sc->sysctl_tree,
373 		    SYSCTL_CHILDREN(fclk_node), OID_AUTO,
374 		    "actual_freq", CTLFLAG_RD,
375 		    &fclk_configs[i].actual_frequency, i,
376 		    "Actual frequency");
377 		SYSCTL_ADD_PROC(&sc->sysctl_tree,
378 		    SYSCTL_CHILDREN(fclk_node), OID_AUTO,
379 		    "freq", CTLFLAG_RW | CTLTYPE_INT | CTLFLAG_NEEDGIANT,
380 		    &fclk_configs[i], i,
381 		    zy7_devcfg_fclk_sysctl_freq,
382 		    "I", "Configured frequency");
383 		SYSCTL_ADD_PROC(&sc->sysctl_tree,
384 		    SYSCTL_CHILDREN(fclk_node), OID_AUTO,
385 		    "source", CTLFLAG_RW | CTLTYPE_STRING | CTLFLAG_NEEDGIANT,
386 		    &fclk_configs[i], i,
387 		    zy7_devcfg_fclk_sysctl_source,
388 		    "A", "Clock source");
389 	}
390 
391 	return (0);
392 }
393 
394 /* Enable programming the PL through PCAP. */
395 static void
396 zy7_devcfg_init_hw(struct zy7_devcfg_softc *sc)
397 {
398 
399 	DEVCFG_SC_ASSERT_LOCKED(sc);
400 
401 	/* Set devcfg control register. */
402 	WR4(sc, ZY7_DEVCFG_CTRL,
403 	    ZY7_DEVCFG_CTRL_PCFG_PROG_B |
404 	    ZY7_DEVCFG_CTRL_PCAP_PR |
405 	    ZY7_DEVCFG_CTRL_PCAP_MODE |
406 	    ZY7_DEVCFG_CTRL_USER_MODE |
407 	    ZY7_DEVCFG_CTRL_RESVD_WR11 |
408 	    ZY7_DEVCFG_CTRL_SPNIDEN |
409 	    ZY7_DEVCFG_CTRL_SPIDEN |
410 	    ZY7_DEVCFG_CTRL_NIDEN |
411 	    ZY7_DEVCFG_CTRL_DBGEN |
412 	    ZY7_DEVCFG_CTRL_DAP_EN_MASK);
413 
414 	/* Turn off internal PCAP loopback. */
415 	WR4(sc, ZY7_DEVCFG_MCTRL, RD4(sc, ZY7_DEVCFG_MCTRL) &
416 	    ~ZY7_DEVCFG_MCTRL_INT_PCAP_LPBK);
417 }
418 
419 /* Clear previous configuration of the PL by asserting PROG_B. */
420 static int
421 zy7_devcfg_reset_pl(struct zy7_devcfg_softc *sc)
422 {
423 	uint32_t devcfg_ctl;
424 	int tries, err;
425 
426 	DEVCFG_SC_ASSERT_LOCKED(sc);
427 
428 	devcfg_ctl = RD4(sc, ZY7_DEVCFG_CTRL);
429 
430 	/* Clear sticky bits and set up INIT signal positive edge interrupt. */
431 	WR4(sc, ZY7_DEVCFG_INT_STATUS, ZY7_DEVCFG_INT_ALL);
432 	WR4(sc, ZY7_DEVCFG_INT_MASK, ~ZY7_DEVCFG_INT_PCFG_INIT_PE);
433 
434 	/* Deassert PROG_B (active low). */
435 	devcfg_ctl |= ZY7_DEVCFG_CTRL_PCFG_PROG_B;
436 	WR4(sc, ZY7_DEVCFG_CTRL, devcfg_ctl);
437 
438 	/*
439 	 * Wait for INIT to assert.  If it is already asserted, we may not get
440 	 * an edge interrupt so cancel it and continue.
441 	 */
442 	if ((RD4(sc, ZY7_DEVCFG_STATUS) &
443 	     ZY7_DEVCFG_STATUS_PCFG_INIT) != 0) {
444 		/* Already asserted.  Cancel interrupt. */
445 		WR4(sc, ZY7_DEVCFG_INT_MASK, ~0);
446 	}
447 	else {
448 		/* Wait for positive edge interrupt. */
449 		err = mtx_sleep(sc, &sc->sc_mtx, PCATCH, "zy7i1", hz);
450 		if (err != 0)
451 			return (err);
452 	}
453 
454 	/* Reassert PROG_B (active low). */
455 	devcfg_ctl &= ~ZY7_DEVCFG_CTRL_PCFG_PROG_B;
456 	WR4(sc, ZY7_DEVCFG_CTRL, devcfg_ctl);
457 
458 	/* Wait for INIT deasserted.  This happens almost instantly. */
459 	tries = 0;
460 	while ((RD4(sc, ZY7_DEVCFG_STATUS) &
461 		ZY7_DEVCFG_STATUS_PCFG_INIT) != 0) {
462 		if (++tries >= 100)
463 			return (EIO);
464 		DELAY(5);
465 	}
466 
467 	/* Clear sticky bits and set up INIT positive edge interrupt. */
468 	WR4(sc, ZY7_DEVCFG_INT_STATUS, ZY7_DEVCFG_INT_ALL);
469 	WR4(sc, ZY7_DEVCFG_INT_MASK, ~ZY7_DEVCFG_INT_PCFG_INIT_PE);
470 
471 	/* Deassert PROG_B again. */
472 	devcfg_ctl |= ZY7_DEVCFG_CTRL_PCFG_PROG_B;
473 	WR4(sc, ZY7_DEVCFG_CTRL, devcfg_ctl);
474 
475 	/*
476 	 * Wait for INIT asserted indicating FPGA internal initialization
477 	 * is complete.
478 	 */
479 	err = mtx_sleep(sc, &sc->sc_mtx, PCATCH, "zy7i2", hz);
480 	if (err != 0)
481 		return (err);
482 
483 	/* Clear sticky DONE bit in interrupt status. */
484 	WR4(sc, ZY7_DEVCFG_INT_STATUS, ZY7_DEVCFG_INT_ALL);
485 
486 	return (0);
487 }
488 
489 /* Callback function for bus_dmamap_load(). */
490 static void
491 zy7_dma_cb2(void *arg, bus_dma_segment_t *seg, int nsegs, int error)
492 {
493 	if (!error && nsegs == 1)
494 		*(bus_addr_t *)arg = seg[0].ds_addr;
495 }
496 
497 static int
498 zy7_devcfg_open(struct cdev *dev, int oflags, int devtype, struct thread *td)
499 {
500 	struct zy7_devcfg_softc *sc = dev->si_drv1;
501 	int err;
502 
503 	DEVCFG_SC_LOCK(sc);
504 	if (sc->is_open) {
505 		DEVCFG_SC_UNLOCK(sc);
506 		return (EBUSY);
507 	}
508 
509 	sc->dma_map = NULL;
510 	err = bus_dma_tag_create(bus_get_dma_tag(sc->dev), 4, 0,
511 				 BUS_SPACE_MAXADDR_32BIT,
512 				 BUS_SPACE_MAXADDR,
513 				 NULL, NULL,
514 				 PAGE_SIZE,
515 				 1,
516 				 PAGE_SIZE,
517 				 0,
518 				 busdma_lock_mutex,
519 				 &sc->sc_mtx,
520 				 &sc->dma_tag);
521 	if (err) {
522 		DEVCFG_SC_UNLOCK(sc);
523 		return (err);
524 	}
525 
526 	sc->is_open = 1;
527 	DEVCFG_SC_UNLOCK(sc);
528 	return (0);
529 }
530 
531 static int
532 zy7_devcfg_write(struct cdev *dev, struct uio *uio, int ioflag)
533 {
534 	struct zy7_devcfg_softc *sc = dev->si_drv1;
535 	void *dma_mem;
536 	bus_addr_t dma_physaddr;
537 	int segsz, err;
538 
539 	DEVCFG_SC_LOCK(sc);
540 
541 	/* First write?  Reset PL. */
542 	if (uio->uio_offset == 0 && uio->uio_resid > 0)	{
543 		zy7_devcfg_init_hw(sc);
544 		zy7_slcr_preload_pl();
545 		err = zy7_devcfg_reset_pl(sc);
546 		if (err != 0) {
547 			DEVCFG_SC_UNLOCK(sc);
548 			return (err);
549 		}
550 	}
551 
552 	/* Allocate dma memory and load. */
553 	err = bus_dmamem_alloc(sc->dma_tag, &dma_mem, BUS_DMA_NOWAIT,
554 			       &sc->dma_map);
555 	if (err != 0) {
556 		DEVCFG_SC_UNLOCK(sc);
557 		return (err);
558 	}
559 	err = bus_dmamap_load(sc->dma_tag, sc->dma_map, dma_mem, PAGE_SIZE,
560 			      zy7_dma_cb2, &dma_physaddr, 0);
561 	if (err != 0) {
562 		bus_dmamem_free(sc->dma_tag, dma_mem, sc->dma_map);
563 		DEVCFG_SC_UNLOCK(sc);
564 		return (err);
565 	}
566 
567 	while (uio->uio_resid > 0) {
568 		/* If DONE signal has been set, we shouldn't write anymore. */
569 		if ((RD4(sc, ZY7_DEVCFG_INT_STATUS) &
570 		     ZY7_DEVCFG_INT_PCFG_DONE) != 0) {
571 			err = EIO;
572 			break;
573 		}
574 
575 		/* uiomove the data from user buffer to our dma map. */
576 		segsz = MIN(PAGE_SIZE, uio->uio_resid);
577 		DEVCFG_SC_UNLOCK(sc);
578 		err = uiomove(dma_mem, segsz, uio);
579 		DEVCFG_SC_LOCK(sc);
580 		if (err != 0)
581 			break;
582 
583 		/* Flush the cache to memory. */
584 		bus_dmamap_sync(sc->dma_tag, sc->dma_map,
585 				BUS_DMASYNC_PREWRITE);
586 
587 		/* Program devcfg's DMA engine.  The ordering of these
588 		 * register writes is critical.
589 		 */
590 		if (uio->uio_resid > segsz)
591 			WR4(sc, ZY7_DEVCFG_DMA_SRC_ADDR,
592 			    (uint32_t) dma_physaddr);
593 		else
594 			WR4(sc, ZY7_DEVCFG_DMA_SRC_ADDR,
595 			    (uint32_t) dma_physaddr |
596 			    ZY7_DEVCFG_DMA_ADDR_WAIT_PCAP);
597 		WR4(sc, ZY7_DEVCFG_DMA_DST_ADDR, ZY7_DEVCFG_DMA_ADDR_ILLEGAL);
598 		WR4(sc, ZY7_DEVCFG_DMA_SRC_LEN, (segsz+3)/4);
599 		WR4(sc, ZY7_DEVCFG_DMA_DST_LEN, 0);
600 
601 		/* Now clear done bit and set up DMA done interrupt. */
602 		WR4(sc, ZY7_DEVCFG_INT_STATUS, ZY7_DEVCFG_INT_ALL);
603 		WR4(sc, ZY7_DEVCFG_INT_MASK, ~ZY7_DEVCFG_INT_DMA_DONE);
604 
605 		/* Wait for DMA done interrupt. */
606 		err = mtx_sleep(sc->dma_map, &sc->sc_mtx, PCATCH,
607 				"zy7dma", hz);
608 		if (err != 0)
609 			break;
610 
611 		bus_dmamap_sync(sc->dma_tag, sc->dma_map,
612 				BUS_DMASYNC_POSTWRITE);
613 
614 		/* Check DONE signal. */
615 		if ((RD4(sc, ZY7_DEVCFG_INT_STATUS) &
616 		     ZY7_DEVCFG_INT_PCFG_DONE) != 0)
617 			zy7_slcr_postload_pl(zy7_en_level_shifters);
618 	}
619 
620 	bus_dmamap_unload(sc->dma_tag, sc->dma_map);
621 	bus_dmamem_free(sc->dma_tag, dma_mem, sc->dma_map);
622 	DEVCFG_SC_UNLOCK(sc);
623 	return (err);
624 }
625 
626 static int
627 zy7_devcfg_close(struct cdev *dev, int fflag, int devtype, struct thread *td)
628 {
629 	struct zy7_devcfg_softc *sc = dev->si_drv1;
630 
631 	DEVCFG_SC_LOCK(sc);
632 	sc->is_open = 0;
633 	bus_dma_tag_destroy(sc->dma_tag);
634 	DEVCFG_SC_UNLOCK(sc);
635 
636 	zy7_slcr_postload_pl(zy7_en_level_shifters);
637 
638 	return (0);
639 }
640 
641 static void
642 zy7_devcfg_intr(void *arg)
643 {
644 	struct zy7_devcfg_softc *sc = (struct zy7_devcfg_softc *)arg;
645 	uint32_t istatus, imask;
646 
647 	DEVCFG_SC_LOCK(sc);
648 
649 	istatus = RD4(sc, ZY7_DEVCFG_INT_STATUS);
650 	imask = ~RD4(sc, ZY7_DEVCFG_INT_MASK);
651 
652 	/* Turn interrupt off. */
653 	WR4(sc, ZY7_DEVCFG_INT_MASK, ~0);
654 
655 	if ((istatus & imask) == 0) {
656 		DEVCFG_SC_UNLOCK(sc);
657 		return;
658 	}
659 
660 	/* DMA done? */
661 	if ((istatus & ZY7_DEVCFG_INT_DMA_DONE) != 0)
662 		wakeup(sc->dma_map);
663 
664 	/* INIT_B positive edge? */
665 	if ((istatus & ZY7_DEVCFG_INT_PCFG_INIT_PE) != 0)
666 		wakeup(sc);
667 
668 	DEVCFG_SC_UNLOCK(sc);
669 }
670 
671 /* zy7_devcfg_sysctl_pl_done() returns status of the PL_DONE signal.
672  */
673 static int
674 zy7_devcfg_sysctl_pl_done(SYSCTL_HANDLER_ARGS)
675 {
676 	struct zy7_devcfg_softc *sc = zy7_devcfg_softc_p;
677 	int pl_done = 0;
678 
679 	if (sc) {
680 		DEVCFG_SC_LOCK(sc);
681 
682 		/* PCFG_DONE bit is sticky.  Clear it before checking it. */
683 		WR4(sc, ZY7_DEVCFG_INT_STATUS, ZY7_DEVCFG_INT_PCFG_DONE);
684 		pl_done = ((RD4(sc, ZY7_DEVCFG_INT_STATUS) &
685 			    ZY7_DEVCFG_INT_PCFG_DONE) != 0);
686 
687 		DEVCFG_SC_UNLOCK(sc);
688 	}
689 	return (sysctl_handle_int(oidp, &pl_done, 0, req));
690 }
691 
692 static int
693 zy7_devcfg_probe(device_t dev)
694 {
695 
696 	if (!ofw_bus_status_okay(dev))
697 		return (ENXIO);
698 
699 	if (!ofw_bus_is_compatible(dev, "xlnx,zy7_devcfg"))
700 		return (ENXIO);
701 
702 	device_set_desc(dev, "Zynq devcfg block");
703 	return (0);
704 }
705 
706 static int zy7_devcfg_detach(device_t dev);
707 
708 static int
709 zy7_devcfg_attach(device_t dev)
710 {
711 	struct zy7_devcfg_softc *sc = device_get_softc(dev);
712 	int i;
713 	int rid, err;
714 
715 	/* Allow only one attach. */
716 	if (zy7_devcfg_softc_p != NULL)
717 		return (ENXIO);
718 
719 	sc->dev = dev;
720 
721 	DEVCFG_SC_LOCK_INIT(sc);
722 
723 	/* Get memory resource. */
724 	rid = 0;
725 	sc->mem_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid,
726 					     RF_ACTIVE);
727 	if (sc->mem_res == NULL) {
728 		device_printf(dev, "could not allocate memory resources.\n");
729 		zy7_devcfg_detach(dev);
730 		return (ENOMEM);
731 	}
732 
733 	/* Allocate IRQ. */
734 	rid = 0;
735 	sc->irq_res = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid,
736 					     RF_ACTIVE);
737 	if (sc->irq_res == NULL) {
738 		device_printf(dev, "cannot allocate IRQ\n");
739 		zy7_devcfg_detach(dev);
740 		return (ENOMEM);
741 	}
742 
743 	/* Activate the interrupt. */
744 	err = bus_setup_intr(dev, sc->irq_res, INTR_TYPE_MISC | INTR_MPSAFE,
745 			     NULL, zy7_devcfg_intr, sc, &sc->intrhandle);
746 	if (err) {
747 		device_printf(dev, "cannot setup IRQ\n");
748 		zy7_devcfg_detach(dev);
749 		return (err);
750 	}
751 
752 	/* Create /dev/devcfg */
753 	sc->sc_ctl_dev = make_dev(&zy7_devcfg_cdevsw, 0,
754 			  UID_ROOT, GID_WHEEL, 0600, "devcfg");
755 	if (sc->sc_ctl_dev == NULL) {
756 		device_printf(dev, "failed to create /dev/devcfg");
757 		zy7_devcfg_detach(dev);
758 		return (ENXIO);
759 	}
760 	sc->sc_ctl_dev->si_drv1 = sc;
761 
762 	zy7_devcfg_softc_p = sc;
763 
764 	/* Unlock devcfg registers. */
765 	WR4(sc, ZY7_DEVCFG_UNLOCK, ZY7_DEVCFG_UNLOCK_MAGIC);
766 
767 	/* Make sure interrupts are completely disabled. */
768 	WR4(sc, ZY7_DEVCFG_INT_STATUS, ZY7_DEVCFG_INT_ALL);
769 	WR4(sc, ZY7_DEVCFG_INT_MASK, 0xffffffff);
770 
771 	/* Get PS_VERS for SYSCTL. */
772 	zy7_ps_vers = (RD4(sc, ZY7_DEVCFG_MCTRL) &
773 		       ZY7_DEVCFG_MCTRL_PS_VERS_MASK) >>
774 		ZY7_DEVCFG_MCTRL_PS_VERS_SHIFT;
775 
776 	for (i = 0; i < FCLK_NUM; i++) {
777 		fclk_configs[i].source = zy7_pl_fclk_get_source(i);
778 		fclk_configs[i].actual_frequency =
779 			zy7_pl_fclk_enabled(i) ? zy7_pl_fclk_get_freq(i) : 0;
780 		/* Initially assume actual frequency is the configure one */
781 		fclk_configs[i].frequency = fclk_configs[i].actual_frequency;
782 	}
783 
784 	if (zy7_devcfg_init_fclk_sysctl(sc) < 0)
785 		device_printf(dev, "failed to initialized sysctl tree\n");
786 
787 	return (0);
788 }
789 
790 static int
791 zy7_devcfg_detach(device_t dev)
792 {
793 	struct zy7_devcfg_softc *sc = device_get_softc(dev);
794 
795 	if (sc->sysctl_tree_top != NULL) {
796 		sysctl_ctx_free(&sc->sysctl_tree);
797 		sc->sysctl_tree_top = NULL;
798 	}
799 
800 	if (device_is_attached(dev))
801 		bus_generic_detach(dev);
802 
803 	/* Get rid of /dev/devcfg0. */
804 	if (sc->sc_ctl_dev != NULL)
805 		destroy_dev(sc->sc_ctl_dev);
806 
807 	/* Teardown and release interrupt. */
808 	if (sc->irq_res != NULL) {
809 		if (sc->intrhandle)
810 			bus_teardown_intr(dev, sc->irq_res, sc->intrhandle);
811 		bus_release_resource(dev, SYS_RES_IRQ,
812 			     rman_get_rid(sc->irq_res), sc->irq_res);
813 	}
814 
815 	/* Release memory resource. */
816 	if (sc->mem_res != NULL)
817 		bus_release_resource(dev, SYS_RES_MEMORY,
818 			     rman_get_rid(sc->mem_res), sc->mem_res);
819 
820 	zy7_devcfg_softc_p = NULL;
821 
822 	DEVCFG_SC_LOCK_DESTROY(sc);
823 
824 	return (0);
825 }
826 
827 static device_method_t zy7_devcfg_methods[] = {
828 	/* device_if */
829 	DEVMETHOD(device_probe, 	zy7_devcfg_probe),
830 	DEVMETHOD(device_attach, 	zy7_devcfg_attach),
831 	DEVMETHOD(device_detach, 	zy7_devcfg_detach),
832 
833 	DEVMETHOD_END
834 };
835 
836 static driver_t zy7_devcfg_driver = {
837 	"zy7_devcfg",
838 	zy7_devcfg_methods,
839 	sizeof(struct zy7_devcfg_softc),
840 };
841 
842 DRIVER_MODULE(zy7_devcfg, simplebus, zy7_devcfg_driver, 0, 0);
843 MODULE_DEPEND(zy7_devcfg, zy7_slcr, 1, 1, 1);
844