xref: /freebsd/sys/arm/xilinx/zy7_devcfg.c (revision 924226fba12cc9a228c73b956e1b7fa24c60b055)
1 /*-
2  * SPDX-License-Identifier: BSD-2-Clause-FreeBSD
3  *
4  * Copyright (c) 2013 Thomas Skibo
5  * All rights reserved.
6  *
7  * Redistribution and use in source and binary forms, with or without
8  * modification, are permitted provided that the following conditions
9  * are met:
10  * 1. Redistributions of source code must retain the above copyright
11  *    notice, this list of conditions and the following disclaimer.
12  * 2. Redistributions in binary form must reproduce the above copyright
13  *    notice, this list of conditions and the following disclaimer in the
14  *    documentation and/or other materials provided with the distribution.
15  *
16  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
17  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
18  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
19  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
20  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
21  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
22  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
23  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
24  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
25  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
26  * SUCH DAMAGE.
27  *
28  * $FreeBSD$
29  */
30 
31 /*
32  * Zynq-7000 Devcfg driver.  This allows programming the PL (FPGA) section
33  * of Zynq.
34  *
35  * Reference: Zynq-7000 All Programmable SoC Technical Reference Manual.
36  * (v1.4) November 16, 2012.  Xilinx doc UG585.  PL Configuration is
37  * covered in section 6.4.5.
38  */
39 
40 #include <sys/cdefs.h>
41 __FBSDID("$FreeBSD$");
42 
43 #include <sys/param.h>
44 #include <sys/systm.h>
45 #include <sys/conf.h>
46 #include <sys/kernel.h>
47 #include <sys/module.h>
48 #include <sys/sysctl.h>
49 #include <sys/lock.h>
50 #include <sys/mutex.h>
51 #include <sys/resource.h>
52 #include <sys/rman.h>
53 #include <sys/uio.h>
54 
55 #include <machine/bus.h>
56 #include <machine/resource.h>
57 #include <machine/stdarg.h>
58 
59 #include <dev/ofw/ofw_bus.h>
60 #include <dev/ofw/ofw_bus_subr.h>
61 
62 #include <arm/xilinx/zy7_slcr.h>
63 
64 struct zy7_devcfg_softc {
65 	device_t	dev;
66 	struct mtx	sc_mtx;
67 	struct resource	*mem_res;
68 	struct resource *irq_res;
69 	struct cdev	*sc_ctl_dev;
70 	void		*intrhandle;
71 
72 	bus_dma_tag_t	dma_tag;
73 	bus_dmamap_t	dma_map;
74 
75 	int		is_open;
76 
77 	struct sysctl_ctx_list sysctl_tree;
78 	struct sysctl_oid *sysctl_tree_top;
79 };
80 
81 static struct zy7_devcfg_softc *zy7_devcfg_softc_p;
82 
83 #define	FCLK_NUM	4
84 
85 struct zy7_fclk_config {
86 	int		source;
87 	int		frequency;
88 	int		actual_frequency;
89 };
90 
91 static struct zy7_fclk_config fclk_configs[FCLK_NUM];
92 
93 #define DEVCFG_SC_LOCK(sc)		mtx_lock(&(sc)->sc_mtx)
94 #define	DEVCFG_SC_UNLOCK(sc)		mtx_unlock(&(sc)->sc_mtx)
95 #define DEVCFG_SC_LOCK_INIT(sc) \
96 	mtx_init(&(sc)->sc_mtx, device_get_nameunit((sc)->dev),	\
97 	    "zy7_devcfg", MTX_DEF)
98 #define DEVCFG_SC_LOCK_DESTROY(sc)	mtx_destroy(&(sc)->sc_mtx);
99 #define DEVCFG_SC_ASSERT_LOCKED(sc)	mtx_assert(&(sc)->sc_mtx, MA_OWNED);
100 
101 #define RD4(sc, off) 		(bus_read_4((sc)->mem_res, (off)))
102 #define WR4(sc, off, val) 	(bus_write_4((sc)->mem_res, (off), (val)))
103 
104 SYSCTL_NODE(_hw, OID_AUTO, fpga, CTLFLAG_RD | CTLFLAG_MPSAFE, 0,
105     "Xilinx Zynq-7000 PL (FPGA) section");
106 
107 static int zy7_devcfg_sysctl_pl_done(SYSCTL_HANDLER_ARGS);
108 SYSCTL_PROC(_hw_fpga, OID_AUTO, pl_done,
109     CTLTYPE_INT | CTLFLAG_RD | CTLFLAG_NEEDGIANT, NULL, 0,
110     zy7_devcfg_sysctl_pl_done, "I",
111     "PL section config DONE signal");
112 
113 static int zy7_en_level_shifters = 1;
114 SYSCTL_INT(_hw_fpga, OID_AUTO, en_level_shifters, CTLFLAG_RW,
115 	   &zy7_en_level_shifters, 0,
116 	   "Enable PS-PL level shifters after device config");
117 
118 static int zy7_ps_vers = 0;
119 SYSCTL_INT(_hw, OID_AUTO, ps_vers, CTLFLAG_RD, &zy7_ps_vers, 0,
120 	   "Zynq-7000 PS version");
121 
122 static int zy7_devcfg_fclk_sysctl_level_shifters(SYSCTL_HANDLER_ARGS);
123 SYSCTL_PROC(_hw_fpga, OID_AUTO, level_shifters,
124     CTLFLAG_RW | CTLTYPE_INT | CTLFLAG_NEEDGIANT, NULL, 0,
125     zy7_devcfg_fclk_sysctl_level_shifters, "I",
126     "Enable/disable level shifters");
127 
128 /* cdev entry points. */
129 static int zy7_devcfg_open(struct cdev *, int, int, struct thread *);
130 static int zy7_devcfg_write(struct cdev *, struct uio *, int);
131 static int zy7_devcfg_close(struct cdev *, int, int, struct thread *);
132 
133 struct cdevsw zy7_devcfg_cdevsw = {
134 	.d_version =	D_VERSION,
135 	.d_open =	zy7_devcfg_open,
136 	.d_write =	zy7_devcfg_write,
137 	.d_close =	zy7_devcfg_close,
138 	.d_name =	"devcfg",
139 };
140 
141 /* Devcfg block registers. */
142 #define ZY7_DEVCFG_CTRL			0x0000
143 #define   ZY7_DEVCFG_CTRL_FORCE_RST		(1<<31)
144 #define   ZY7_DEVCFG_CTRL_PCFG_PROG_B		(1<<30)
145 #define   ZY7_DEVCFG_CTRL_PCFG_POR_CNT_4K	(1<<29)
146 #define   ZY7_DEVCFG_CTRL_PCAP_PR		(1<<27)
147 #define   ZY7_DEVCFG_CTRL_PCAP_MODE		(1<<26)
148 #define   ZY7_DEVCFG_CTRL_QTR_PCAP_RATE_EN	(1<<25)
149 #define   ZY7_DEVCFG_CTRL_MULTIBOOT_EN		(1<<24)
150 #define   ZY7_DEVCFG_CTRL_JTAG_CHAIN_DIS	(1<<23)
151 #define   ZY7_DEVCFG_CTRL_USER_MODE		(1<<15)
152 #define   ZY7_DEVCFG_CTRL_RESVD_WR11		(3<<13)	/* always write 11 */
153 #define   ZY7_DEVCFG_CTRL_PCFG_AES_FUSE		(1<<12)
154 #define   ZY7_DEVCFG_CTRL_PCFG_AES_EN_MASK	(7<<9)	/* all 1's or 0's */
155 #define   ZY7_DEVCFG_CTRL_SEU_EN		(1<<8)
156 #define   ZY7_DEVCFG_CTRL_SEC_EN		(1<<7)
157 #define   ZY7_DEVCFG_CTRL_SPNIDEN		(1<<6)
158 #define   ZY7_DEVCFG_CTRL_SPIDEN		(1<<5)
159 #define   ZY7_DEVCFG_CTRL_NIDEN			(1<<4)
160 #define   ZY7_DEVCFG_CTRL_DBGEN			(1<<3)
161 #define   ZY7_DEVCFG_CTRL_DAP_EN_MASK		(7<<0)	/* all 1's to enable */
162 
163 #define ZY7_DEVCFG_LOCK			0x004
164 #define   ZY7_DEVCFG_LOCK_AES_FUSE_LOCK		(1<<4)
165 #define   ZY7_DEVCFG_LOCK_AES_EN		(1<<3)
166 #define   ZY7_DEVCFG_LOCK_SEU_LOCK		(1<<2)
167 #define   ZY7_DEVCFG_LOCK_SEC_LOCK		(1<<1)
168 #define   ZY7_DEVCFG_LOCK_DBG_LOCK		(1<<0)
169 
170 #define ZY7_DEVCFG_CFG			0x008
171 #define   ZY7_DEVCFG_CFG_RFIFO_TH_MASK		(3<<10)
172 #define   ZY7_DEVCFG_CFG_WFIFO_TH_MASK		(3<<8)
173 #define   ZY7_DEVCFG_CFG_RCLK_EDGE		(1<<7)
174 #define   ZY7_DEVCFG_CFG_WCLK_EDGE		(1<<6)
175 #define   ZY7_DEVCFG_CFG_DIS_SRC_INC		(1<<5)
176 #define   ZY7_DEVCFG_CFG_DIS_DST_INC		(1<<4)
177 
178 #define ZY7_DEVCFG_INT_STATUS		0x00C
179 #define ZY7_DEVCFG_INT_MASK		0x010
180 #define   ZY7_DEVCFG_INT_PSS_GTS_USR_B		(1<<31)
181 #define   ZY7_DEVCFG_INT_PSS_FST_CFG_B		(1<<30)
182 #define   ZY7_DEVCFG_INT_PSS_GPWRDWN_B		(1<<29)
183 #define   ZY7_DEVCFG_INT_PSS_GTS_CFG_B		(1<<28)
184 #define   ZY7_DEVCFG_INT_CFG_RESET_B		(1<<27)
185 #define   ZY7_DEVCFG_INT_AXI_WTO		(1<<23)	/* axi write timeout */
186 #define   ZY7_DEVCFG_INT_AXI_WERR		(1<<22)	/* axi write err */
187 #define   ZY7_DEVCFG_INT_AXI_RTO		(1<<21)	/* axi read timeout */
188 #define   ZY7_DEVCFG_INT_AXI_RERR		(1<<20)	/* axi read err */
189 #define   ZY7_DEVCFG_INT_RX_FIFO_OV		(1<<18)	/* rx fifo overflow */
190 #define   ZY7_DEVCFG_INT_WR_FIFO_LVL		(1<<17)	/* wr fifo < level */
191 #define   ZY7_DEVCFG_INT_RD_FIFO_LVL		(1<<16)	/* rd fifo >= level */
192 #define   ZY7_DEVCFG_INT_DMA_CMD_ERR		(1<<15)
193 #define   ZY7_DEVCFG_INT_DMA_Q_OV		(1<<14)
194 #define   ZY7_DEVCFG_INT_DMA_DONE		(1<<13)
195 #define   ZY7_DEVCFG_INT_DMA_PCAP_DONE		(1<<12)
196 #define   ZY7_DEVCFG_INT_P2D_LEN_ERR		(1<<11)
197 #define   ZY7_DEVCFG_INT_PCFG_HMAC_ERR		(1<<6)
198 #define   ZY7_DEVCFG_INT_PCFG_SEU_ERR		(1<<5)
199 #define   ZY7_DEVCFG_INT_PCFG_POR_B		(1<<4)
200 #define   ZY7_DEVCFG_INT_PCFG_CFG_RST		(1<<3)
201 #define   ZY7_DEVCFG_INT_PCFG_DONE		(1<<2)
202 #define   ZY7_DEVCFG_INT_PCFG_INIT_PE		(1<<1)
203 #define   ZY7_DEVCFG_INT_PCFG_INIT_NE		(1<<0)
204 #define   ZY7_DEVCFG_INT_ERRORS			0x00f0f860
205 #define   ZY7_DEVCFG_INT_ALL			0xf8f7f87f
206 
207 #define ZY7_DEVCFG_STATUS		0x014
208 #define   ZY7_DEVCFG_STATUS_DMA_CMD_Q_F		(1<<31)	/* cmd queue full */
209 #define   ZY7_DEVCFG_STATUS_DMA_CMD_Q_E		(1<<30) /* cmd queue empty */
210 #define   ZY7_DEVCFG_STATUS_DONE_COUNT_MASK	(3<<28)
211 #define   ZY7_DEVCFG_STATUS_DONE_COUNT_SHIFT	28
212 #define   ZY7_DEVCFG_STATUS_RX_FIFO_LVL_MASK	(0x1f<<20)
213 #define   ZY7_DEVCFG_STATUS_RX_FIFO_LVL_SHIFT	20
214 #define   ZY7_DEVCFG_STATUS_TX_FIFO_LVL_MASK	(0x7f<<12)
215 #define   ZY7_DEVCFG_STATUS_TX_FIFO_LVL_SHIFT	12
216 #define   ZY7_DEVCFG_STATUS_PSS_GTS_USR_B	(1<<11)
217 #define   ZY7_DEVCFG_STATUS_PSS_FST_CFG_B	(1<<10)
218 #define   ZY7_DEVCFG_STATUS_PSS_GPWRDWN_B	(1<<9)
219 #define   ZY7_DEVCFG_STATUS_PSS_GTS_CFG_B	(1<<8)
220 #define   ZY7_DEVCFG_STATUS_ILL_APB_ACCE	(1<<6)
221 #define   ZY7_DEVCFG_STATUS_PSS_CFG_RESET_B	(1<<5)
222 #define   ZY7_DEVCFG_STATUS_PCFG_INIT		(1<<4)
223 #define   ZY7_DEVCFG_STATUS_EFUSE_BBRAM_KEY_DIS	(1<<3)
224 #define   ZY7_DEVCFG_STATUS_EFUSE_SEC_EN	(1<<2)
225 #define   ZY7_DEVCFG_STATUS_EFUSE_JTAG_DIS	(1<<1)
226 
227 #define ZY7_DEVCFG_DMA_SRC_ADDR		0x018
228 #define ZY7_DEVCFG_DMA_DST_ADDR		0x01c
229 #define   ZY7_DEVCFG_DMA_ADDR_WAIT_PCAP	1
230 #define   ZY7_DEVCFG_DMA_ADDR_ILLEGAL		0xffffffff
231 
232 #define ZY7_DEVCFG_DMA_SRC_LEN		0x020	/* in 4-byte words. */
233 #define ZY7_DEVCFG_DMA_SRC_LEN_MAX		0x7ffffff
234 #define ZY7_DEVCFG_DMA_DST_LEN		0x024
235 #define ZY7_DEVCFG_ROM_SHADOW		0x028
236 #define ZY7_DEVCFG_MULTIBOOT_ADDR	0x02c
237 #define ZY7_DEVCFG_SW_ID		0x030
238 #define ZY7_DEVCFG_UNLOCK		0x034
239 #define ZY7_DEVCFG_UNLOCK_MAGIC			0x757bdf0d
240 #define ZY7_DEVCFG_MCTRL		0x080
241 #define   ZY7_DEVCFG_MCTRL_PS_VERS_MASK		(0xf<<28)
242 #define   ZY7_DEVCFG_MCTRL_PS_VERS_SHIFT	28
243 #define   ZY7_DEVCFG_MCTRL_PCFG_POR_B		(1<<8)
244 #define   ZY7_DEVCFG_MCTRL_INT_PCAP_LPBK	(1<<4)
245 #define ZY7_DEVCFG_XADCIF_CFG		0x100
246 #define ZY7_DEVCFG_XADCIF_INT_STAT	0x104
247 #define ZY7_DEVCFG_XADCIF_INT_MASK	0x108
248 #define ZY7_DEVCFG_XADCIF_MSTS		0x10c
249 #define ZY7_DEVCFG_XADCIF_CMD_FIFO	0x110
250 #define ZY7_DEVCFG_XADCIF_RD_FIFO	0x114
251 #define ZY7_DEVCFG_XADCIF_MCTL		0x118
252 
253 static int
254 zy7_devcfg_fclk_sysctl_source(SYSCTL_HANDLER_ARGS)
255 {
256 	char buf[4];
257 	struct zy7_fclk_config *cfg;
258 	int unit;
259 	int error;
260 
261 	cfg = arg1;
262 	unit = arg2;
263 
264 	switch (cfg->source) {
265 		case ZY7_PL_FCLK_SRC_IO:
266 		case ZY7_PL_FCLK_SRC_IO_ALT:
267 			strncpy(buf, "IO", sizeof(buf));
268 			break;
269 		case ZY7_PL_FCLK_SRC_DDR:
270 			strncpy(buf, "DDR", sizeof(buf));
271 			break;
272 		case ZY7_PL_FCLK_SRC_ARM:
273 			strncpy(buf, "ARM", sizeof(buf));
274 			break;
275 		default:
276 			strncpy(buf, "???", sizeof(buf));
277 			break;
278 	}
279 
280 	error = sysctl_handle_string(oidp, buf, sizeof(buf), req);
281 	if (error != 0 || req->newptr == NULL)
282 		return (error);
283 
284 	if (strcasecmp(buf, "io") == 0)
285 		cfg->source = ZY7_PL_FCLK_SRC_IO;
286 	else if (strcasecmp(buf, "ddr") == 0)
287 		cfg->source = ZY7_PL_FCLK_SRC_DDR;
288 	else if (strcasecmp(buf, "arm") == 0)
289 		cfg->source = ZY7_PL_FCLK_SRC_ARM;
290 	else
291 		return (EINVAL);
292 
293 	zy7_pl_fclk_set_source(unit, cfg->source);
294 	if (cfg->frequency > 0)
295 		cfg->actual_frequency = zy7_pl_fclk_get_freq(unit);
296 
297 	return (0);
298 }
299 
300 static int
301 zy7_devcfg_fclk_sysctl_freq(SYSCTL_HANDLER_ARGS)
302 {
303 	struct zy7_fclk_config *cfg;
304 	int unit;
305 	int error;
306 	int freq;
307 	int new_actual_freq;
308 
309 	cfg = arg1;
310 	unit = arg2;
311 
312 	freq = cfg->frequency;
313 
314 	error = sysctl_handle_int(oidp, &freq, 0, req);
315 	if (error != 0 || req->newptr == NULL)
316 		return (error);
317 
318 	if (freq > 0) {
319 		new_actual_freq = zy7_pl_fclk_set_freq(unit, freq);
320 		if (new_actual_freq < 0)
321 			return (EINVAL);
322 		if (!zy7_pl_fclk_enabled(unit))
323 			zy7_pl_fclk_enable(unit);
324 	}
325 	else {
326 		zy7_pl_fclk_disable(unit);
327 		new_actual_freq = 0;
328 	}
329 
330 	cfg->frequency = freq;
331 	cfg->actual_frequency = new_actual_freq;
332 
333 	return (0);
334 }
335 
336 static int
337 zy7_devcfg_fclk_sysctl_level_shifters(SYSCTL_HANDLER_ARGS)
338 {
339 	int error, enabled;
340 
341 	enabled = zy7_pl_level_shifters_enabled();
342 
343 	error = sysctl_handle_int(oidp, &enabled, 0, req);
344 	if (error != 0 || req->newptr == NULL)
345 		return (error);
346 
347 	if (enabled)
348 		zy7_pl_level_shifters_enable();
349 	else
350 		zy7_pl_level_shifters_disable();
351 
352 	return (0);
353 }
354 
355 static int
356 zy7_devcfg_init_fclk_sysctl(struct zy7_devcfg_softc *sc)
357 {
358 	struct sysctl_oid *fclk_node;
359 	char fclk_num[4];
360 	int i;
361 
362 	sysctl_ctx_init(&sc->sysctl_tree);
363 	sc->sysctl_tree_top = SYSCTL_ADD_NODE(&sc->sysctl_tree,
364 	    SYSCTL_STATIC_CHILDREN(_hw_fpga), OID_AUTO, "fclk",
365 	    CTLFLAG_RD | CTLFLAG_MPSAFE, 0, "");
366 	if (sc->sysctl_tree_top == NULL) {
367 		sysctl_ctx_free(&sc->sysctl_tree);
368 		return (-1);
369 	}
370 
371 	for (i = 0; i < FCLK_NUM; i++) {
372 		snprintf(fclk_num, sizeof(fclk_num), "%d", i);
373 		fclk_node = SYSCTL_ADD_NODE(&sc->sysctl_tree,
374 		    SYSCTL_CHILDREN(sc->sysctl_tree_top), OID_AUTO, fclk_num,
375 		    CTLFLAG_RD | CTLFLAG_MPSAFE, 0, "");
376 
377 		SYSCTL_ADD_INT(&sc->sysctl_tree,
378 		    SYSCTL_CHILDREN(fclk_node), OID_AUTO,
379 		    "actual_freq", CTLFLAG_RD,
380 		    &fclk_configs[i].actual_frequency, i,
381 		    "Actual frequency");
382 		SYSCTL_ADD_PROC(&sc->sysctl_tree,
383 		    SYSCTL_CHILDREN(fclk_node), OID_AUTO,
384 		    "freq", CTLFLAG_RW | CTLTYPE_INT | CTLFLAG_NEEDGIANT,
385 		    &fclk_configs[i], i,
386 		    zy7_devcfg_fclk_sysctl_freq,
387 		    "I", "Configured frequency");
388 		SYSCTL_ADD_PROC(&sc->sysctl_tree,
389 		    SYSCTL_CHILDREN(fclk_node), OID_AUTO,
390 		    "source", CTLFLAG_RW | CTLTYPE_STRING | CTLFLAG_NEEDGIANT,
391 		    &fclk_configs[i], i,
392 		    zy7_devcfg_fclk_sysctl_source,
393 		    "A", "Clock source");
394 	}
395 
396 	return (0);
397 }
398 
399 /* Enable programming the PL through PCAP. */
400 static void
401 zy7_devcfg_init_hw(struct zy7_devcfg_softc *sc)
402 {
403 
404 	DEVCFG_SC_ASSERT_LOCKED(sc);
405 
406 	/* Set devcfg control register. */
407 	WR4(sc, ZY7_DEVCFG_CTRL,
408 	    ZY7_DEVCFG_CTRL_PCFG_PROG_B |
409 	    ZY7_DEVCFG_CTRL_PCAP_PR |
410 	    ZY7_DEVCFG_CTRL_PCAP_MODE |
411 	    ZY7_DEVCFG_CTRL_USER_MODE |
412 	    ZY7_DEVCFG_CTRL_RESVD_WR11 |
413 	    ZY7_DEVCFG_CTRL_SPNIDEN |
414 	    ZY7_DEVCFG_CTRL_SPIDEN |
415 	    ZY7_DEVCFG_CTRL_NIDEN |
416 	    ZY7_DEVCFG_CTRL_DBGEN |
417 	    ZY7_DEVCFG_CTRL_DAP_EN_MASK);
418 
419 	/* Turn off internal PCAP loopback. */
420 	WR4(sc, ZY7_DEVCFG_MCTRL, RD4(sc, ZY7_DEVCFG_MCTRL) &
421 	    ~ZY7_DEVCFG_MCTRL_INT_PCAP_LPBK);
422 }
423 
424 /* Clear previous configuration of the PL by asserting PROG_B. */
425 static int
426 zy7_devcfg_reset_pl(struct zy7_devcfg_softc *sc)
427 {
428 	uint32_t devcfg_ctl;
429 	int tries, err;
430 
431 	DEVCFG_SC_ASSERT_LOCKED(sc);
432 
433 	devcfg_ctl = RD4(sc, ZY7_DEVCFG_CTRL);
434 
435 	/* Clear sticky bits and set up INIT signal positive edge interrupt. */
436 	WR4(sc, ZY7_DEVCFG_INT_STATUS, ZY7_DEVCFG_INT_ALL);
437 	WR4(sc, ZY7_DEVCFG_INT_MASK, ~ZY7_DEVCFG_INT_PCFG_INIT_PE);
438 
439 	/* Deassert PROG_B (active low). */
440 	devcfg_ctl |= ZY7_DEVCFG_CTRL_PCFG_PROG_B;
441 	WR4(sc, ZY7_DEVCFG_CTRL, devcfg_ctl);
442 
443 	/*
444 	 * Wait for INIT to assert.  If it is already asserted, we may not get
445 	 * an edge interrupt so cancel it and continue.
446 	 */
447 	if ((RD4(sc, ZY7_DEVCFG_STATUS) &
448 	     ZY7_DEVCFG_STATUS_PCFG_INIT) != 0) {
449 		/* Already asserted.  Cancel interrupt. */
450 		WR4(sc, ZY7_DEVCFG_INT_MASK, ~0);
451 	}
452 	else {
453 		/* Wait for positive edge interrupt. */
454 		err = mtx_sleep(sc, &sc->sc_mtx, PCATCH, "zy7i1", hz);
455 		if (err != 0)
456 			return (err);
457 	}
458 
459 	/* Reassert PROG_B (active low). */
460 	devcfg_ctl &= ~ZY7_DEVCFG_CTRL_PCFG_PROG_B;
461 	WR4(sc, ZY7_DEVCFG_CTRL, devcfg_ctl);
462 
463 	/* Wait for INIT deasserted.  This happens almost instantly. */
464 	tries = 0;
465 	while ((RD4(sc, ZY7_DEVCFG_STATUS) &
466 		ZY7_DEVCFG_STATUS_PCFG_INIT) != 0) {
467 		if (++tries >= 100)
468 			return (EIO);
469 		DELAY(5);
470 	}
471 
472 	/* Clear sticky bits and set up INIT positive edge interrupt. */
473 	WR4(sc, ZY7_DEVCFG_INT_STATUS, ZY7_DEVCFG_INT_ALL);
474 	WR4(sc, ZY7_DEVCFG_INT_MASK, ~ZY7_DEVCFG_INT_PCFG_INIT_PE);
475 
476 	/* Deassert PROG_B again. */
477 	devcfg_ctl |= ZY7_DEVCFG_CTRL_PCFG_PROG_B;
478 	WR4(sc, ZY7_DEVCFG_CTRL, devcfg_ctl);
479 
480 	/*
481 	 * Wait for INIT asserted indicating FPGA internal initialization
482 	 * is complete.
483 	 */
484 	err = mtx_sleep(sc, &sc->sc_mtx, PCATCH, "zy7i2", hz);
485 	if (err != 0)
486 		return (err);
487 
488 	/* Clear sticky DONE bit in interrupt status. */
489 	WR4(sc, ZY7_DEVCFG_INT_STATUS, ZY7_DEVCFG_INT_ALL);
490 
491 	return (0);
492 }
493 
494 /* Callback function for bus_dmamap_load(). */
495 static void
496 zy7_dma_cb2(void *arg, bus_dma_segment_t *seg, int nsegs, int error)
497 {
498 	if (!error && nsegs == 1)
499 		*(bus_addr_t *)arg = seg[0].ds_addr;
500 }
501 
502 static int
503 zy7_devcfg_open(struct cdev *dev, int oflags, int devtype, struct thread *td)
504 {
505 	struct zy7_devcfg_softc *sc = dev->si_drv1;
506 	int err;
507 
508 	DEVCFG_SC_LOCK(sc);
509 	if (sc->is_open) {
510 		DEVCFG_SC_UNLOCK(sc);
511 		return (EBUSY);
512 	}
513 
514 	sc->dma_map = NULL;
515 	err = bus_dma_tag_create(bus_get_dma_tag(sc->dev), 4, 0,
516 				 BUS_SPACE_MAXADDR_32BIT,
517 				 BUS_SPACE_MAXADDR,
518 				 NULL, NULL,
519 				 PAGE_SIZE,
520 				 1,
521 				 PAGE_SIZE,
522 				 0,
523 				 busdma_lock_mutex,
524 				 &sc->sc_mtx,
525 				 &sc->dma_tag);
526 	if (err) {
527 		DEVCFG_SC_UNLOCK(sc);
528 		return (err);
529 	}
530 
531 	sc->is_open = 1;
532 	DEVCFG_SC_UNLOCK(sc);
533 	return (0);
534 }
535 
536 static int
537 zy7_devcfg_write(struct cdev *dev, struct uio *uio, int ioflag)
538 {
539 	struct zy7_devcfg_softc *sc = dev->si_drv1;
540 	void *dma_mem;
541 	bus_addr_t dma_physaddr;
542 	int segsz, err;
543 
544 	DEVCFG_SC_LOCK(sc);
545 
546 	/* First write?  Reset PL. */
547 	if (uio->uio_offset == 0 && uio->uio_resid > 0)	{
548 		zy7_devcfg_init_hw(sc);
549 		zy7_slcr_preload_pl();
550 		err = zy7_devcfg_reset_pl(sc);
551 		if (err != 0) {
552 			DEVCFG_SC_UNLOCK(sc);
553 			return (err);
554 		}
555 	}
556 
557 	/* Allocate dma memory and load. */
558 	err = bus_dmamem_alloc(sc->dma_tag, &dma_mem, BUS_DMA_NOWAIT,
559 			       &sc->dma_map);
560 	if (err != 0) {
561 		DEVCFG_SC_UNLOCK(sc);
562 		return (err);
563 	}
564 	err = bus_dmamap_load(sc->dma_tag, sc->dma_map, dma_mem, PAGE_SIZE,
565 			      zy7_dma_cb2, &dma_physaddr, 0);
566 	if (err != 0) {
567 		bus_dmamem_free(sc->dma_tag, dma_mem, sc->dma_map);
568 		DEVCFG_SC_UNLOCK(sc);
569 		return (err);
570 	}
571 
572 	while (uio->uio_resid > 0) {
573 		/* If DONE signal has been set, we shouldn't write anymore. */
574 		if ((RD4(sc, ZY7_DEVCFG_INT_STATUS) &
575 		     ZY7_DEVCFG_INT_PCFG_DONE) != 0) {
576 			err = EIO;
577 			break;
578 		}
579 
580 		/* uiomove the data from user buffer to our dma map. */
581 		segsz = MIN(PAGE_SIZE, uio->uio_resid);
582 		DEVCFG_SC_UNLOCK(sc);
583 		err = uiomove(dma_mem, segsz, uio);
584 		DEVCFG_SC_LOCK(sc);
585 		if (err != 0)
586 			break;
587 
588 		/* Flush the cache to memory. */
589 		bus_dmamap_sync(sc->dma_tag, sc->dma_map,
590 				BUS_DMASYNC_PREWRITE);
591 
592 		/* Program devcfg's DMA engine.  The ordering of these
593 		 * register writes is critical.
594 		 */
595 		if (uio->uio_resid > segsz)
596 			WR4(sc, ZY7_DEVCFG_DMA_SRC_ADDR,
597 			    (uint32_t) dma_physaddr);
598 		else
599 			WR4(sc, ZY7_DEVCFG_DMA_SRC_ADDR,
600 			    (uint32_t) dma_physaddr |
601 			    ZY7_DEVCFG_DMA_ADDR_WAIT_PCAP);
602 		WR4(sc, ZY7_DEVCFG_DMA_DST_ADDR, ZY7_DEVCFG_DMA_ADDR_ILLEGAL);
603 		WR4(sc, ZY7_DEVCFG_DMA_SRC_LEN, (segsz+3)/4);
604 		WR4(sc, ZY7_DEVCFG_DMA_DST_LEN, 0);
605 
606 		/* Now clear done bit and set up DMA done interrupt. */
607 		WR4(sc, ZY7_DEVCFG_INT_STATUS, ZY7_DEVCFG_INT_ALL);
608 		WR4(sc, ZY7_DEVCFG_INT_MASK, ~ZY7_DEVCFG_INT_DMA_DONE);
609 
610 		/* Wait for DMA done interrupt. */
611 		err = mtx_sleep(sc->dma_map, &sc->sc_mtx, PCATCH,
612 				"zy7dma", hz);
613 		if (err != 0)
614 			break;
615 
616 		bus_dmamap_sync(sc->dma_tag, sc->dma_map,
617 				BUS_DMASYNC_POSTWRITE);
618 
619 		/* Check DONE signal. */
620 		if ((RD4(sc, ZY7_DEVCFG_INT_STATUS) &
621 		     ZY7_DEVCFG_INT_PCFG_DONE) != 0)
622 			zy7_slcr_postload_pl(zy7_en_level_shifters);
623 	}
624 
625 	bus_dmamap_unload(sc->dma_tag, sc->dma_map);
626 	bus_dmamem_free(sc->dma_tag, dma_mem, sc->dma_map);
627 	DEVCFG_SC_UNLOCK(sc);
628 	return (err);
629 }
630 
631 static int
632 zy7_devcfg_close(struct cdev *dev, int fflag, int devtype, struct thread *td)
633 {
634 	struct zy7_devcfg_softc *sc = dev->si_drv1;
635 
636 	DEVCFG_SC_LOCK(sc);
637 	sc->is_open = 0;
638 	bus_dma_tag_destroy(sc->dma_tag);
639 	DEVCFG_SC_UNLOCK(sc);
640 
641 	zy7_slcr_postload_pl(zy7_en_level_shifters);
642 
643 	return (0);
644 }
645 
646 static void
647 zy7_devcfg_intr(void *arg)
648 {
649 	struct zy7_devcfg_softc *sc = (struct zy7_devcfg_softc *)arg;
650 	uint32_t istatus, imask;
651 
652 	DEVCFG_SC_LOCK(sc);
653 
654 	istatus = RD4(sc, ZY7_DEVCFG_INT_STATUS);
655 	imask = ~RD4(sc, ZY7_DEVCFG_INT_MASK);
656 
657 	/* Turn interrupt off. */
658 	WR4(sc, ZY7_DEVCFG_INT_MASK, ~0);
659 
660 	if ((istatus & imask) == 0) {
661 		DEVCFG_SC_UNLOCK(sc);
662 		return;
663 	}
664 
665 	/* DMA done? */
666 	if ((istatus & ZY7_DEVCFG_INT_DMA_DONE) != 0)
667 		wakeup(sc->dma_map);
668 
669 	/* INIT_B positive edge? */
670 	if ((istatus & ZY7_DEVCFG_INT_PCFG_INIT_PE) != 0)
671 		wakeup(sc);
672 
673 	DEVCFG_SC_UNLOCK(sc);
674 }
675 
676 /* zy7_devcfg_sysctl_pl_done() returns status of the PL_DONE signal.
677  */
678 static int
679 zy7_devcfg_sysctl_pl_done(SYSCTL_HANDLER_ARGS)
680 {
681 	struct zy7_devcfg_softc *sc = zy7_devcfg_softc_p;
682 	int pl_done = 0;
683 
684 	if (sc) {
685 		DEVCFG_SC_LOCK(sc);
686 
687 		/* PCFG_DONE bit is sticky.  Clear it before checking it. */
688 		WR4(sc, ZY7_DEVCFG_INT_STATUS, ZY7_DEVCFG_INT_PCFG_DONE);
689 		pl_done = ((RD4(sc, ZY7_DEVCFG_INT_STATUS) &
690 			    ZY7_DEVCFG_INT_PCFG_DONE) != 0);
691 
692 		DEVCFG_SC_UNLOCK(sc);
693 	}
694 	return (sysctl_handle_int(oidp, &pl_done, 0, req));
695 }
696 
697 static int
698 zy7_devcfg_probe(device_t dev)
699 {
700 
701 	if (!ofw_bus_status_okay(dev))
702 		return (ENXIO);
703 
704 	if (!ofw_bus_is_compatible(dev, "xlnx,zy7_devcfg"))
705 		return (ENXIO);
706 
707 	device_set_desc(dev, "Zynq devcfg block");
708 	return (0);
709 }
710 
711 static int zy7_devcfg_detach(device_t dev);
712 
713 static int
714 zy7_devcfg_attach(device_t dev)
715 {
716 	struct zy7_devcfg_softc *sc = device_get_softc(dev);
717 	int i;
718 	int rid, err;
719 
720 	/* Allow only one attach. */
721 	if (zy7_devcfg_softc_p != NULL)
722 		return (ENXIO);
723 
724 	sc->dev = dev;
725 
726 	DEVCFG_SC_LOCK_INIT(sc);
727 
728 	/* Get memory resource. */
729 	rid = 0;
730 	sc->mem_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid,
731 					     RF_ACTIVE);
732 	if (sc->mem_res == NULL) {
733 		device_printf(dev, "could not allocate memory resources.\n");
734 		zy7_devcfg_detach(dev);
735 		return (ENOMEM);
736 	}
737 
738 	/* Allocate IRQ. */
739 	rid = 0;
740 	sc->irq_res = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid,
741 					     RF_ACTIVE);
742 	if (sc->irq_res == NULL) {
743 		device_printf(dev, "cannot allocate IRQ\n");
744 		zy7_devcfg_detach(dev);
745 		return (ENOMEM);
746 	}
747 
748 	/* Activate the interrupt. */
749 	err = bus_setup_intr(dev, sc->irq_res, INTR_TYPE_MISC | INTR_MPSAFE,
750 			     NULL, zy7_devcfg_intr, sc, &sc->intrhandle);
751 	if (err) {
752 		device_printf(dev, "cannot setup IRQ\n");
753 		zy7_devcfg_detach(dev);
754 		return (err);
755 	}
756 
757 	/* Create /dev/devcfg */
758 	sc->sc_ctl_dev = make_dev(&zy7_devcfg_cdevsw, 0,
759 			  UID_ROOT, GID_WHEEL, 0600, "devcfg");
760 	if (sc->sc_ctl_dev == NULL) {
761 		device_printf(dev, "failed to create /dev/devcfg");
762 		zy7_devcfg_detach(dev);
763 		return (ENXIO);
764 	}
765 	sc->sc_ctl_dev->si_drv1 = sc;
766 
767 	zy7_devcfg_softc_p = sc;
768 
769 	/* Unlock devcfg registers. */
770 	WR4(sc, ZY7_DEVCFG_UNLOCK, ZY7_DEVCFG_UNLOCK_MAGIC);
771 
772 	/* Make sure interrupts are completely disabled. */
773 	WR4(sc, ZY7_DEVCFG_INT_STATUS, ZY7_DEVCFG_INT_ALL);
774 	WR4(sc, ZY7_DEVCFG_INT_MASK, 0xffffffff);
775 
776 	/* Get PS_VERS for SYSCTL. */
777 	zy7_ps_vers = (RD4(sc, ZY7_DEVCFG_MCTRL) &
778 		       ZY7_DEVCFG_MCTRL_PS_VERS_MASK) >>
779 		ZY7_DEVCFG_MCTRL_PS_VERS_SHIFT;
780 
781 	for (i = 0; i < FCLK_NUM; i++) {
782 		fclk_configs[i].source = zy7_pl_fclk_get_source(i);
783 		fclk_configs[i].actual_frequency =
784 			zy7_pl_fclk_enabled(i) ? zy7_pl_fclk_get_freq(i) : 0;
785 		/* Initially assume actual frequency is the configure one */
786 		fclk_configs[i].frequency = fclk_configs[i].actual_frequency;
787 	}
788 
789 	if (zy7_devcfg_init_fclk_sysctl(sc) < 0)
790 		device_printf(dev, "failed to initialized sysctl tree\n");
791 
792 	return (0);
793 }
794 
795 static int
796 zy7_devcfg_detach(device_t dev)
797 {
798 	struct zy7_devcfg_softc *sc = device_get_softc(dev);
799 
800 	if (sc->sysctl_tree_top != NULL) {
801 		sysctl_ctx_free(&sc->sysctl_tree);
802 		sc->sysctl_tree_top = NULL;
803 	}
804 
805 	if (device_is_attached(dev))
806 		bus_generic_detach(dev);
807 
808 	/* Get rid of /dev/devcfg0. */
809 	if (sc->sc_ctl_dev != NULL)
810 		destroy_dev(sc->sc_ctl_dev);
811 
812 	/* Teardown and release interrupt. */
813 	if (sc->irq_res != NULL) {
814 		if (sc->intrhandle)
815 			bus_teardown_intr(dev, sc->irq_res, sc->intrhandle);
816 		bus_release_resource(dev, SYS_RES_IRQ,
817 			     rman_get_rid(sc->irq_res), sc->irq_res);
818 	}
819 
820 	/* Release memory resource. */
821 	if (sc->mem_res != NULL)
822 		bus_release_resource(dev, SYS_RES_MEMORY,
823 			     rman_get_rid(sc->mem_res), sc->mem_res);
824 
825 	zy7_devcfg_softc_p = NULL;
826 
827 	DEVCFG_SC_LOCK_DESTROY(sc);
828 
829 	return (0);
830 }
831 
832 static device_method_t zy7_devcfg_methods[] = {
833 	/* device_if */
834 	DEVMETHOD(device_probe, 	zy7_devcfg_probe),
835 	DEVMETHOD(device_attach, 	zy7_devcfg_attach),
836 	DEVMETHOD(device_detach, 	zy7_devcfg_detach),
837 
838 	DEVMETHOD_END
839 };
840 
841 static driver_t zy7_devcfg_driver = {
842 	"zy7_devcfg",
843 	zy7_devcfg_methods,
844 	sizeof(struct zy7_devcfg_softc),
845 };
846 
847 DRIVER_MODULE(zy7_devcfg, simplebus, zy7_devcfg_driver, 0, 0);
848 MODULE_DEPEND(zy7_devcfg, zy7_slcr, 1, 1, 1);
849