xref: /freebsd/sys/arm/ti/twl/twl.c (revision d4eeb02986980bf33dd56c41ceb9fc5f180c0d47)
1 /*-
2  * SPDX-License-Identifier: BSD-2-Clause-FreeBSD
3  *
4  * Copyright (c) 2011
5  *	Ben Gray <ben.r.gray@gmail.com>.
6  * All rights reserved.
7  *
8  * Redistribution and use in source and binary forms, with or without
9  * modification, are permitted provided that the following conditions
10  * are met:
11  * 1. Redistributions of source code must retain the above copyright
12  *    notice, this list of conditions and the following disclaimer.
13  * 2. Redistributions in binary form must reproduce the above copyright
14  *    notice, this list of conditions and the following disclaimer in the
15  *    documentation and/or other materials provided with the distribution.
16  *
17  * THIS SOFTWARE IS PROVIDED BY AUTHOR AND CONTRIBUTORS ``AS IS'' AND
18  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
19  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
20  * ARE DISCLAIMED.  IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE
21  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
22  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
23  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
24  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
25  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
26  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
27  * SUCH DAMAGE.
28  */
29 
30 #include <sys/cdefs.h>
31 __FBSDID("$FreeBSD$");
32 
33 /*
34  * Texas Instruments TWL4030/TWL5030/TWL60x0/TPS659x0 Power Management and
35  * Audio CODEC devices.
36  *
37  * This code is based on the Linux TWL multifunctional device driver, which is
38  * copyright (C) 2005-2006 Texas Instruments, Inc.
39  *
40  * These chips are typically used as support ICs for the OMAP range of embedded
41  * ARM processes/SOC from Texas Instruments.  They are typically used to control
42  * on board voltages, however some variants have other features like audio
43  * codecs, USB OTG transceivers, RTC, PWM, etc.
44  *
45  * This driver acts as a bus for more specific companion devices.
46  *
47  */
48 
49 #include <sys/param.h>
50 #include <sys/systm.h>
51 #include <sys/kernel.h>
52 #include <sys/lock.h>
53 #include <sys/module.h>
54 #include <sys/bus.h>
55 #include <sys/resource.h>
56 #include <sys/rman.h>
57 #include <sys/sysctl.h>
58 #include <sys/mutex.h>
59 #include <sys/malloc.h>
60 
61 #include <machine/bus.h>
62 #include <machine/resource.h>
63 #include <machine/intr.h>
64 
65 #include <dev/iicbus/iicbus.h>
66 #include <dev/iicbus/iiconf.h>
67 
68 #include <dev/ofw/openfirm.h>
69 #include <dev/ofw/ofw_bus.h>
70 #include <dev/ofw/ofw_bus_subr.h>
71 
72 #include "arm/ti/twl/twl.h"
73 
74 /* TWL device IDs */
75 #define TWL_DEVICE_UNKNOWN          0xffff
76 #define TWL_DEVICE_4030             0x4030
77 #define TWL_DEVICE_6025             0x6025
78 #define TWL_DEVICE_6030             0x6030
79 
80 /* Each TWL device typically has more than one I2C address */
81 #define TWL_MAX_SUBADDRS            4
82 
83 /* The maximum number of bytes that can be written in one call */
84 #define TWL_MAX_IIC_DATA_SIZE       63
85 
86 /* The TWL devices typically use 4 I2C address for the different internal
87  * register sets, plus one SmartReflex I2C address.
88  */
89 #define TWL_CHIP_ID0                0x48
90 #define TWL_CHIP_ID1                0x49
91 #define TWL_CHIP_ID2                0x4A
92 #define TWL_CHIP_ID3                0x4B
93 
94 #define TWL_SMARTREFLEX_CHIP_ID     0x12
95 
96 #define TWL_INVALID_CHIP_ID         0xff
97 
98 struct twl_softc {
99 	device_t		sc_dev;
100 	struct mtx		sc_mtx;
101 	unsigned int	sc_type;
102 
103 	uint8_t			sc_subaddr_map[TWL_MAX_SUBADDRS];
104 
105 	struct intr_config_hook	sc_scan_hook;
106 
107 	device_t		sc_vreg;
108 	device_t		sc_clks;
109 };
110 
111 /**
112  *	Macros for driver mutex locking
113  */
114 #define TWL_LOCK(_sc)             mtx_lock(&(_sc)->sc_mtx)
115 #define	TWL_UNLOCK(_sc)           mtx_unlock(&(_sc)->sc_mtx)
116 #define TWL_LOCK_INIT(_sc) \
117 	mtx_init(&_sc->sc_mtx, device_get_nameunit(_sc->sc_dev), \
118 	         "twl", MTX_DEF)
119 #define TWL_LOCK_DESTROY(_sc)     mtx_destroy(&_sc->sc_mtx);
120 #define TWL_ASSERT_LOCKED(_sc)    mtx_assert(&_sc->sc_mtx, MA_OWNED);
121 #define TWL_ASSERT_UNLOCKED(_sc)  mtx_assert(&_sc->sc_mtx, MA_NOTOWNED);
122 
123 /**
124  *	twl_is_4030 - returns true if the device is TWL4030
125  *	twl_is_6025 - returns true if the device is TWL6025
126  *	twl_is_6030 - returns true if the device is TWL6030
127  *	@sc: device soft context
128  *
129  *	Returns a non-zero value if the device matches.
130  *
131  *	RETURNS:
132  *	Returns a non-zero value if the device matches, otherwise zero.
133  */
134 int
135 twl_is_4030(device_t dev)
136 {
137 	struct twl_softc *sc = device_get_softc(dev);
138 	return (sc->sc_type == TWL_DEVICE_4030);
139 }
140 
141 int
142 twl_is_6025(device_t dev)
143 {
144 	struct twl_softc *sc = device_get_softc(dev);
145 	return (sc->sc_type == TWL_DEVICE_6025);
146 }
147 
148 int
149 twl_is_6030(device_t dev)
150 {
151 	struct twl_softc *sc = device_get_softc(dev);
152 	return (sc->sc_type == TWL_DEVICE_6030);
153 }
154 
155 /**
156  *	twl_read - read one or more registers from the TWL device
157  *	@sc: device soft context
158  *	@nsub: the sub-module to read from
159  *	@reg: the register offset within the module to read
160  *	@buf: buffer to store the bytes in
161  *	@cnt: the number of bytes to read
162  *
163  *	Reads one or more registers and stores the result in the suppled buffer.
164  *
165  *	RETURNS:
166  *	Zero on success or an error code on failure.
167  */
168 int
169 twl_read(device_t dev, uint8_t nsub, uint8_t reg, uint8_t *buf, uint16_t cnt)
170 {
171 	struct twl_softc *sc;
172 	struct iic_msg msg[2];
173 	uint8_t addr;
174 	int rc;
175 
176 	sc = device_get_softc(dev);
177 
178 	TWL_LOCK(sc);
179 	addr = sc->sc_subaddr_map[nsub];
180 	TWL_UNLOCK(sc);
181 
182 	if (addr == TWL_INVALID_CHIP_ID)
183 		return (EIO);
184 
185 	/* Set the address to read from */
186 	msg[0].slave = addr;
187 	msg[0].flags = IIC_M_WR | IIC_M_NOSTOP;
188 	msg[0].len = 1;
189 	msg[0].buf = &reg;
190 	/* Read the data back */
191 	msg[1].slave = addr;
192 	msg[1].flags = IIC_M_RD;
193 	msg[1].len = cnt;
194 	msg[1].buf = buf;
195 
196 	rc = iicbus_transfer(dev, msg, 2);
197 	if (rc != 0) {
198 		device_printf(dev, "iicbus read failed (adr:0x%02x, reg:0x%02x)\n",
199 		              addr, reg);
200 		return (EIO);
201 	}
202 
203 	return (0);
204 }
205 
206 /**
207  *	twl_write - writes one or more registers to the TWL device
208  *	@sc: device soft context
209  *	@nsub: the sub-module to read from
210  *	@reg: the register offset within the module to read
211  *	@buf: data to write
212  *	@cnt: the number of bytes to write
213  *
214  *	Writes one or more registers.
215  *
216  *	RETURNS:
217  *	Zero on success or a negative error code on failure.
218  */
219 int
220 twl_write(device_t dev, uint8_t nsub, uint8_t reg, uint8_t *buf, uint16_t cnt)
221 {
222 	struct twl_softc *sc;
223 	struct iic_msg msg;
224 	uint8_t addr;
225 	uint8_t tmp_buf[TWL_MAX_IIC_DATA_SIZE + 1];
226 	int rc;
227 
228 	if (cnt > TWL_MAX_IIC_DATA_SIZE)
229 		return (ENOMEM);
230 
231 	/* Set the register address as the first byte */
232 	tmp_buf[0] = reg;
233 	memcpy(&tmp_buf[1], buf, cnt);
234 
235 	sc = device_get_softc(dev);
236 
237 	TWL_LOCK(sc);
238 	addr = sc->sc_subaddr_map[nsub];
239 	TWL_UNLOCK(sc);
240 
241 	if (addr == TWL_INVALID_CHIP_ID)
242 		return (EIO);
243 
244 	/* Setup the transfer and execute it */
245 	msg.slave = addr;
246 	msg.flags = IIC_M_WR;
247 	msg.len = cnt + 1;
248 	msg.buf = tmp_buf;
249 
250 	rc = iicbus_transfer(dev, &msg, 1);
251 	if (rc != 0) {
252 		device_printf(sc->sc_dev, "iicbus write failed (adr:0x%02x, reg:0x%02x)\n",
253 		              addr, reg);
254 		return (EIO);
255 	}
256 
257 	return (0);
258 }
259 
260 /**
261  *	twl_test_present - checks if a device with given address is present
262  *	@sc: device soft context
263  *	@addr: the address of the device to scan for
264  *
265  *	Sends just the address byte and checks for an ACK. If no ACK then device
266  *	is assumed to not be present.
267  *
268  *	RETURNS:
269  *	EIO if device is not present, otherwise 0 is returned.
270  */
271 static int
272 twl_test_present(struct twl_softc *sc, uint8_t addr)
273 {
274 	struct iic_msg msg;
275 	uint8_t tmp;
276 
277 	/* Set the address to read from */
278 	msg.slave = addr;
279 	msg.flags = IIC_M_RD;
280 	msg.len = 1;
281 	msg.buf = &tmp;
282 
283 	if (iicbus_transfer(sc->sc_dev, &msg, 1) != 0)
284 		return (EIO);
285 
286 	return (0);
287 }
288 
289 /**
290  *	twl_scan - scans the i2c bus for sub modules
291  *	@dev: the twl device
292  *
293  *	TWL devices don't just have one i2c slave address, rather they have up to
294  *	5 other addresses, each is for separate modules within the device. This
295  *	function scans the bus for 4 possible sub-devices and stores the info
296  *	internally.
297  *
298  */
299 static void
300 twl_scan(void *dev)
301 {
302 	struct twl_softc *sc;
303 	unsigned i;
304 	uint8_t devs[TWL_MAX_SUBADDRS];
305 	uint8_t base = TWL_CHIP_ID0;
306 
307 	sc = device_get_softc((device_t)dev);
308 
309 	memset(devs, TWL_INVALID_CHIP_ID, TWL_MAX_SUBADDRS);
310 
311 	/* Try each of the addresses (0x48, 0x49, 0x4a & 0x4b) to determine which
312 	 * sub modules we have.
313 	 */
314 	for (i = 0; i < TWL_MAX_SUBADDRS; i++) {
315 		if (twl_test_present(sc, (base + i)) == 0) {
316 			devs[i] = (base + i);
317 			device_printf(sc->sc_dev, "Found (sub)device at 0x%02x\n", (base + i));
318 		}
319 	}
320 
321 	TWL_LOCK(sc);
322 	memcpy(sc->sc_subaddr_map, devs, TWL_MAX_SUBADDRS);
323 	TWL_UNLOCK(sc);
324 
325 	/* Finished with the interrupt hook */
326 	config_intrhook_disestablish(&sc->sc_scan_hook);
327 }
328 
329 /**
330  *	twl_probe -
331  *	@dev: the twl device
332  *
333  *	Scans the FDT for a match for the device, possible compatible device
334  *	strings are; "ti,twl6030", "ti,twl6025", "ti,twl4030".
335  *
336  *	The FDT compat string also determines the type of device (it is currently
337  *	not possible to dynamically determine the device type).
338  *
339  */
340 static int
341 twl_probe(device_t dev)
342 {
343 	phandle_t node;
344 	const char *compat;
345 	int len, l;
346 	struct twl_softc *sc;
347 
348 	if ((compat = ofw_bus_get_compat(dev)) == NULL)
349 		return (ENXIO);
350 
351 	if ((node = ofw_bus_get_node(dev)) == 0)
352 		return (ENXIO);
353 
354 	/* Get total 'compatible' prop len */
355 	if ((len = OF_getproplen(node, "compatible")) <= 0)
356 		return (ENXIO);
357 
358 	sc = device_get_softc(dev);
359 	sc->sc_dev = dev;
360 	sc->sc_type = TWL_DEVICE_UNKNOWN;
361 
362 	while (len > 0) {
363 		if (strncasecmp(compat, "ti,twl6030", 10) == 0)
364 			sc->sc_type = TWL_DEVICE_6030;
365 		else if (strncasecmp(compat, "ti,twl6025", 10) == 0)
366 			sc->sc_type = TWL_DEVICE_6025;
367 		else if (strncasecmp(compat, "ti,twl4030", 10) == 0)
368 			sc->sc_type = TWL_DEVICE_4030;
369 
370 		if (sc->sc_type != TWL_DEVICE_UNKNOWN)
371 			break;
372 
373 		/* Slide to the next sub-string. */
374 		l = strlen(compat) + 1;
375 		compat += l;
376 		len -= l;
377 	}
378 
379 	switch (sc->sc_type) {
380 	case TWL_DEVICE_4030:
381 		device_set_desc(dev, "TI TWL4030/TPS659x0 Companion IC");
382 		break;
383 	case TWL_DEVICE_6025:
384 		device_set_desc(dev, "TI TWL6025 Companion IC");
385 		break;
386 	case TWL_DEVICE_6030:
387 		device_set_desc(dev, "TI TWL6030 Companion IC");
388 		break;
389 	case TWL_DEVICE_UNKNOWN:
390 	default:
391 		return (ENXIO);
392 	}
393 
394 	return (0);
395 }
396 
397 static int
398 twl_attach(device_t dev)
399 {
400 	struct twl_softc *sc;
401 
402 	sc = device_get_softc(dev);
403 	sc->sc_dev = dev;
404 
405 	TWL_LOCK_INIT(sc);
406 
407 	/* We have to wait until interrupts are enabled. I2C read and write
408 	 * only works if the interrupts are available.
409 	 */
410 	sc->sc_scan_hook.ich_func = twl_scan;
411 	sc->sc_scan_hook.ich_arg = dev;
412 
413 	if (config_intrhook_establish(&sc->sc_scan_hook) != 0)
414 		return (ENOMEM);
415 
416 	/* FIXME: should be in DTS file */
417 	if ((sc->sc_vreg = device_add_child(dev, "twl_vreg", -1)) == NULL)
418 		device_printf(dev, "could not allocate twl_vreg instance\n");
419 	if ((sc->sc_clks = device_add_child(dev, "twl_clks", -1)) == NULL)
420 		device_printf(dev, "could not allocate twl_clks instance\n");
421 
422 	return (bus_generic_attach(dev));
423 }
424 
425 static int
426 twl_detach(device_t dev)
427 {
428 	struct twl_softc *sc;
429 
430 	sc = device_get_softc(dev);
431 
432 	if (sc->sc_vreg)
433 		device_delete_child(dev, sc->sc_vreg);
434 	if (sc->sc_clks)
435 		device_delete_child(dev, sc->sc_clks);
436 
437 	TWL_LOCK_DESTROY(sc);
438 
439 	return (0);
440 }
441 
442 static device_method_t twl_methods[] = {
443 	DEVMETHOD(device_probe,		twl_probe),
444 	DEVMETHOD(device_attach,	twl_attach),
445 	DEVMETHOD(device_detach,	twl_detach),
446 
447 	{0, 0},
448 };
449 
450 static driver_t twl_driver = {
451 	"twl",
452 	twl_methods,
453 	sizeof(struct twl_softc),
454 };
455 
456 DRIVER_MODULE(twl, iicbus, twl_driver, 0, 0);
457 MODULE_VERSION(twl, 1);
458