xref: /freebsd/sys/arm/ti/twl/twl.c (revision 525fe93dc7487a1e63a90f6a2b956abc601963c1)
1 /*-
2  * SPDX-License-Identifier: BSD-2-Clause
3  *
4  * Copyright (c) 2011
5  *	Ben Gray <ben.r.gray@gmail.com>.
6  * All rights reserved.
7  *
8  * Redistribution and use in source and binary forms, with or without
9  * modification, are permitted provided that the following conditions
10  * are met:
11  * 1. Redistributions of source code must retain the above copyright
12  *    notice, this list of conditions and the following disclaimer.
13  * 2. Redistributions in binary form must reproduce the above copyright
14  *    notice, this list of conditions and the following disclaimer in the
15  *    documentation and/or other materials provided with the distribution.
16  *
17  * THIS SOFTWARE IS PROVIDED BY AUTHOR AND CONTRIBUTORS ``AS IS'' AND
18  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
19  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
20  * ARE DISCLAIMED.  IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE
21  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
22  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
23  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
24  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
25  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
26  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
27  * SUCH DAMAGE.
28  */
29 
30 #include <sys/cdefs.h>
31 /*
32  * Texas Instruments TWL4030/TWL5030/TWL60x0/TPS659x0 Power Management and
33  * Audio CODEC devices.
34  *
35  * This code is based on the Linux TWL multifunctional device driver, which is
36  * copyright (C) 2005-2006 Texas Instruments, Inc.
37  *
38  * These chips are typically used as support ICs for the OMAP range of embedded
39  * ARM processes/SOC from Texas Instruments.  They are typically used to control
40  * on board voltages, however some variants have other features like audio
41  * codecs, USB OTG transceivers, RTC, PWM, etc.
42  *
43  * This driver acts as a bus for more specific companion devices.
44  *
45  */
46 
47 #include <sys/param.h>
48 #include <sys/systm.h>
49 #include <sys/kernel.h>
50 #include <sys/lock.h>
51 #include <sys/module.h>
52 #include <sys/bus.h>
53 #include <sys/resource.h>
54 #include <sys/rman.h>
55 #include <sys/sysctl.h>
56 #include <sys/mutex.h>
57 #include <sys/malloc.h>
58 
59 #include <machine/bus.h>
60 #include <machine/resource.h>
61 #include <machine/intr.h>
62 
63 #include <dev/iicbus/iicbus.h>
64 #include <dev/iicbus/iiconf.h>
65 
66 #include <dev/ofw/openfirm.h>
67 #include <dev/ofw/ofw_bus.h>
68 #include <dev/ofw/ofw_bus_subr.h>
69 
70 #include "arm/ti/twl/twl.h"
71 
72 /* TWL device IDs */
73 #define TWL_DEVICE_UNKNOWN          0xffff
74 #define TWL_DEVICE_4030             0x4030
75 #define TWL_DEVICE_6025             0x6025
76 #define TWL_DEVICE_6030             0x6030
77 
78 /* Each TWL device typically has more than one I2C address */
79 #define TWL_MAX_SUBADDRS            4
80 
81 /* The maximum number of bytes that can be written in one call */
82 #define TWL_MAX_IIC_DATA_SIZE       63
83 
84 /* The TWL devices typically use 4 I2C address for the different internal
85  * register sets, plus one SmartReflex I2C address.
86  */
87 #define TWL_CHIP_ID0                0x48
88 #define TWL_CHIP_ID1                0x49
89 #define TWL_CHIP_ID2                0x4A
90 #define TWL_CHIP_ID3                0x4B
91 
92 #define TWL_SMARTREFLEX_CHIP_ID     0x12
93 
94 #define TWL_INVALID_CHIP_ID         0xff
95 
96 struct twl_softc {
97 	device_t		sc_dev;
98 	struct mtx		sc_mtx;
99 	unsigned int	sc_type;
100 
101 	uint8_t			sc_subaddr_map[TWL_MAX_SUBADDRS];
102 
103 	struct intr_config_hook	sc_scan_hook;
104 
105 	device_t		sc_vreg;
106 	device_t		sc_clks;
107 };
108 
109 /**
110  *	Macros for driver mutex locking
111  */
112 #define TWL_LOCK(_sc)             mtx_lock(&(_sc)->sc_mtx)
113 #define	TWL_UNLOCK(_sc)           mtx_unlock(&(_sc)->sc_mtx)
114 #define TWL_LOCK_INIT(_sc) \
115 	mtx_init(&_sc->sc_mtx, device_get_nameunit(_sc->sc_dev), \
116 	         "twl", MTX_DEF)
117 #define TWL_LOCK_DESTROY(_sc)     mtx_destroy(&_sc->sc_mtx);
118 #define TWL_ASSERT_LOCKED(_sc)    mtx_assert(&_sc->sc_mtx, MA_OWNED);
119 #define TWL_ASSERT_UNLOCKED(_sc)  mtx_assert(&_sc->sc_mtx, MA_NOTOWNED);
120 
121 /**
122  *	twl_is_4030 - returns true if the device is TWL4030
123  *	twl_is_6025 - returns true if the device is TWL6025
124  *	twl_is_6030 - returns true if the device is TWL6030
125  *	@sc: device soft context
126  *
127  *	Returns a non-zero value if the device matches.
128  *
129  *	RETURNS:
130  *	Returns a non-zero value if the device matches, otherwise zero.
131  */
132 int
133 twl_is_4030(device_t dev)
134 {
135 	struct twl_softc *sc = device_get_softc(dev);
136 	return (sc->sc_type == TWL_DEVICE_4030);
137 }
138 
139 int
140 twl_is_6025(device_t dev)
141 {
142 	struct twl_softc *sc = device_get_softc(dev);
143 	return (sc->sc_type == TWL_DEVICE_6025);
144 }
145 
146 int
147 twl_is_6030(device_t dev)
148 {
149 	struct twl_softc *sc = device_get_softc(dev);
150 	return (sc->sc_type == TWL_DEVICE_6030);
151 }
152 
153 /**
154  *	twl_read - read one or more registers from the TWL device
155  *	@sc: device soft context
156  *	@nsub: the sub-module to read from
157  *	@reg: the register offset within the module to read
158  *	@buf: buffer to store the bytes in
159  *	@cnt: the number of bytes to read
160  *
161  *	Reads one or more registers and stores the result in the suppled buffer.
162  *
163  *	RETURNS:
164  *	Zero on success or an error code on failure.
165  */
166 int
167 twl_read(device_t dev, uint8_t nsub, uint8_t reg, uint8_t *buf, uint16_t cnt)
168 {
169 	struct twl_softc *sc;
170 	struct iic_msg msg[2];
171 	uint8_t addr;
172 	int rc;
173 
174 	sc = device_get_softc(dev);
175 
176 	TWL_LOCK(sc);
177 	addr = sc->sc_subaddr_map[nsub];
178 	TWL_UNLOCK(sc);
179 
180 	if (addr == TWL_INVALID_CHIP_ID)
181 		return (EIO);
182 
183 	/* Set the address to read from */
184 	msg[0].slave = addr;
185 	msg[0].flags = IIC_M_WR | IIC_M_NOSTOP;
186 	msg[0].len = 1;
187 	msg[0].buf = &reg;
188 	/* Read the data back */
189 	msg[1].slave = addr;
190 	msg[1].flags = IIC_M_RD;
191 	msg[1].len = cnt;
192 	msg[1].buf = buf;
193 
194 	rc = iicbus_transfer(dev, msg, 2);
195 	if (rc != 0) {
196 		device_printf(dev, "iicbus read failed (adr:0x%02x, reg:0x%02x)\n",
197 		              addr, reg);
198 		return (EIO);
199 	}
200 
201 	return (0);
202 }
203 
204 /**
205  *	twl_write - writes one or more registers to the TWL device
206  *	@sc: device soft context
207  *	@nsub: the sub-module to read from
208  *	@reg: the register offset within the module to read
209  *	@buf: data to write
210  *	@cnt: the number of bytes to write
211  *
212  *	Writes one or more registers.
213  *
214  *	RETURNS:
215  *	Zero on success or a negative error code on failure.
216  */
217 int
218 twl_write(device_t dev, uint8_t nsub, uint8_t reg, uint8_t *buf, uint16_t cnt)
219 {
220 	struct twl_softc *sc;
221 	struct iic_msg msg;
222 	uint8_t addr;
223 	uint8_t tmp_buf[TWL_MAX_IIC_DATA_SIZE + 1];
224 	int rc;
225 
226 	if (cnt > TWL_MAX_IIC_DATA_SIZE)
227 		return (ENOMEM);
228 
229 	/* Set the register address as the first byte */
230 	tmp_buf[0] = reg;
231 	memcpy(&tmp_buf[1], buf, cnt);
232 
233 	sc = device_get_softc(dev);
234 
235 	TWL_LOCK(sc);
236 	addr = sc->sc_subaddr_map[nsub];
237 	TWL_UNLOCK(sc);
238 
239 	if (addr == TWL_INVALID_CHIP_ID)
240 		return (EIO);
241 
242 	/* Setup the transfer and execute it */
243 	msg.slave = addr;
244 	msg.flags = IIC_M_WR;
245 	msg.len = cnt + 1;
246 	msg.buf = tmp_buf;
247 
248 	rc = iicbus_transfer(dev, &msg, 1);
249 	if (rc != 0) {
250 		device_printf(sc->sc_dev, "iicbus write failed (adr:0x%02x, reg:0x%02x)\n",
251 		              addr, reg);
252 		return (EIO);
253 	}
254 
255 	return (0);
256 }
257 
258 /**
259  *	twl_test_present - checks if a device with given address is present
260  *	@sc: device soft context
261  *	@addr: the address of the device to scan for
262  *
263  *	Sends just the address byte and checks for an ACK. If no ACK then device
264  *	is assumed to not be present.
265  *
266  *	RETURNS:
267  *	EIO if device is not present, otherwise 0 is returned.
268  */
269 static int
270 twl_test_present(struct twl_softc *sc, uint8_t addr)
271 {
272 	struct iic_msg msg;
273 	uint8_t tmp;
274 
275 	/* Set the address to read from */
276 	msg.slave = addr;
277 	msg.flags = IIC_M_RD;
278 	msg.len = 1;
279 	msg.buf = &tmp;
280 
281 	if (iicbus_transfer(sc->sc_dev, &msg, 1) != 0)
282 		return (EIO);
283 
284 	return (0);
285 }
286 
287 /**
288  *	twl_scan - scans the i2c bus for sub modules
289  *	@dev: the twl device
290  *
291  *	TWL devices don't just have one i2c slave address, rather they have up to
292  *	5 other addresses, each is for separate modules within the device. This
293  *	function scans the bus for 4 possible sub-devices and stores the info
294  *	internally.
295  *
296  */
297 static void
298 twl_scan(void *dev)
299 {
300 	struct twl_softc *sc;
301 	unsigned i;
302 	uint8_t devs[TWL_MAX_SUBADDRS];
303 	uint8_t base = TWL_CHIP_ID0;
304 
305 	sc = device_get_softc((device_t)dev);
306 
307 	memset(devs, TWL_INVALID_CHIP_ID, TWL_MAX_SUBADDRS);
308 
309 	/* Try each of the addresses (0x48, 0x49, 0x4a & 0x4b) to determine which
310 	 * sub modules we have.
311 	 */
312 	for (i = 0; i < TWL_MAX_SUBADDRS; i++) {
313 		if (twl_test_present(sc, (base + i)) == 0) {
314 			devs[i] = (base + i);
315 			device_printf(sc->sc_dev, "Found (sub)device at 0x%02x\n", (base + i));
316 		}
317 	}
318 
319 	TWL_LOCK(sc);
320 	memcpy(sc->sc_subaddr_map, devs, TWL_MAX_SUBADDRS);
321 	TWL_UNLOCK(sc);
322 
323 	/* Finished with the interrupt hook */
324 	config_intrhook_disestablish(&sc->sc_scan_hook);
325 }
326 
327 /**
328  *	twl_probe -
329  *	@dev: the twl device
330  *
331  *	Scans the FDT for a match for the device, possible compatible device
332  *	strings are; "ti,twl6030", "ti,twl6025", "ti,twl4030".
333  *
334  *	The FDT compat string also determines the type of device (it is currently
335  *	not possible to dynamically determine the device type).
336  *
337  */
338 static int
339 twl_probe(device_t dev)
340 {
341 	phandle_t node;
342 	const char *compat;
343 	int len, l;
344 	struct twl_softc *sc;
345 
346 	if ((compat = ofw_bus_get_compat(dev)) == NULL)
347 		return (ENXIO);
348 
349 	if ((node = ofw_bus_get_node(dev)) == 0)
350 		return (ENXIO);
351 
352 	/* Get total 'compatible' prop len */
353 	if ((len = OF_getproplen(node, "compatible")) <= 0)
354 		return (ENXIO);
355 
356 	sc = device_get_softc(dev);
357 	sc->sc_dev = dev;
358 	sc->sc_type = TWL_DEVICE_UNKNOWN;
359 
360 	while (len > 0) {
361 		if (strncasecmp(compat, "ti,twl6030", 10) == 0)
362 			sc->sc_type = TWL_DEVICE_6030;
363 		else if (strncasecmp(compat, "ti,twl6025", 10) == 0)
364 			sc->sc_type = TWL_DEVICE_6025;
365 		else if (strncasecmp(compat, "ti,twl4030", 10) == 0)
366 			sc->sc_type = TWL_DEVICE_4030;
367 
368 		if (sc->sc_type != TWL_DEVICE_UNKNOWN)
369 			break;
370 
371 		/* Slide to the next sub-string. */
372 		l = strlen(compat) + 1;
373 		compat += l;
374 		len -= l;
375 	}
376 
377 	switch (sc->sc_type) {
378 	case TWL_DEVICE_4030:
379 		device_set_desc(dev, "TI TWL4030/TPS659x0 Companion IC");
380 		break;
381 	case TWL_DEVICE_6025:
382 		device_set_desc(dev, "TI TWL6025 Companion IC");
383 		break;
384 	case TWL_DEVICE_6030:
385 		device_set_desc(dev, "TI TWL6030 Companion IC");
386 		break;
387 	case TWL_DEVICE_UNKNOWN:
388 	default:
389 		return (ENXIO);
390 	}
391 
392 	return (0);
393 }
394 
395 static int
396 twl_attach(device_t dev)
397 {
398 	struct twl_softc *sc;
399 
400 	sc = device_get_softc(dev);
401 	sc->sc_dev = dev;
402 
403 	TWL_LOCK_INIT(sc);
404 
405 	/* We have to wait until interrupts are enabled. I2C read and write
406 	 * only works if the interrupts are available.
407 	 */
408 	sc->sc_scan_hook.ich_func = twl_scan;
409 	sc->sc_scan_hook.ich_arg = dev;
410 
411 	if (config_intrhook_establish(&sc->sc_scan_hook) != 0)
412 		return (ENOMEM);
413 
414 	/* FIXME: should be in DTS file */
415 	if ((sc->sc_vreg = device_add_child(dev, "twl_vreg", -1)) == NULL)
416 		device_printf(dev, "could not allocate twl_vreg instance\n");
417 	if ((sc->sc_clks = device_add_child(dev, "twl_clks", -1)) == NULL)
418 		device_printf(dev, "could not allocate twl_clks instance\n");
419 
420 	return (bus_generic_attach(dev));
421 }
422 
423 static int
424 twl_detach(device_t dev)
425 {
426 	struct twl_softc *sc;
427 
428 	sc = device_get_softc(dev);
429 
430 	if (sc->sc_vreg)
431 		device_delete_child(dev, sc->sc_vreg);
432 	if (sc->sc_clks)
433 		device_delete_child(dev, sc->sc_clks);
434 
435 	TWL_LOCK_DESTROY(sc);
436 
437 	return (0);
438 }
439 
440 static device_method_t twl_methods[] = {
441 	DEVMETHOD(device_probe,		twl_probe),
442 	DEVMETHOD(device_attach,	twl_attach),
443 	DEVMETHOD(device_detach,	twl_detach),
444 
445 	{0, 0},
446 };
447 
448 static driver_t twl_driver = {
449 	"twl",
450 	twl_methods,
451 	sizeof(struct twl_softc),
452 };
453 
454 DRIVER_MODULE(twl, iicbus, twl_driver, 0, 0);
455 MODULE_VERSION(twl, 1);
456