xref: /freebsd/sys/arm/ti/twl/twl.c (revision 4072ae4e0291f97a2cc69fa4151988a99b06090c)
1 /*-
2  * SPDX-License-Identifier: BSD-2-Clause-FreeBSD
3  *
4  * Copyright (c) 2011
5  *	Ben Gray <ben.r.gray@gmail.com>.
6  * All rights reserved.
7  *
8  * Redistribution and use in source and binary forms, with or without
9  * modification, are permitted provided that the following conditions
10  * are met:
11  * 1. Redistributions of source code must retain the above copyright
12  *    notice, this list of conditions and the following disclaimer.
13  * 2. Redistributions in binary form must reproduce the above copyright
14  *    notice, this list of conditions and the following disclaimer in the
15  *    documentation and/or other materials provided with the distribution.
16  *
17  * THIS SOFTWARE IS PROVIDED BY AUTHOR AND CONTRIBUTORS ``AS IS'' AND
18  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
19  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
20  * ARE DISCLAIMED.  IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE
21  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
22  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
23  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
24  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
25  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
26  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
27  * SUCH DAMAGE.
28  */
29 
30 #include <sys/cdefs.h>
31 __FBSDID("$FreeBSD$");
32 
33 /*
34  * Texas Instruments TWL4030/TWL5030/TWL60x0/TPS659x0 Power Management and
35  * Audio CODEC devices.
36  *
37  * This code is based on the Linux TWL multifunctional device driver, which is
38  * copyright (C) 2005-2006 Texas Instruments, Inc.
39  *
40  * These chips are typically used as support ICs for the OMAP range of embedded
41  * ARM processes/SOC from Texas Instruments.  They are typically used to control
42  * on board voltages, however some variants have other features like audio
43  * codecs, USB OTG transceivers, RTC, PWM, etc.
44  *
45  * This driver acts as a bus for more specific companion devices.
46  *
47  */
48 
49 #include <sys/param.h>
50 #include <sys/systm.h>
51 #include <sys/kernel.h>
52 #include <sys/lock.h>
53 #include <sys/module.h>
54 #include <sys/bus.h>
55 #include <sys/resource.h>
56 #include <sys/rman.h>
57 #include <sys/sysctl.h>
58 #include <sys/mutex.h>
59 #include <sys/malloc.h>
60 
61 #include <machine/bus.h>
62 #include <machine/resource.h>
63 #include <machine/intr.h>
64 
65 #include <dev/iicbus/iicbus.h>
66 #include <dev/iicbus/iiconf.h>
67 
68 #include <dev/ofw/openfirm.h>
69 #include <dev/ofw/ofw_bus.h>
70 #include <dev/ofw/ofw_bus_subr.h>
71 
72 #include "arm/ti/twl/twl.h"
73 
74 /* TWL device IDs */
75 #define TWL_DEVICE_UNKNOWN          0xffff
76 #define TWL_DEVICE_4030             0x4030
77 #define TWL_DEVICE_6025             0x6025
78 #define TWL_DEVICE_6030             0x6030
79 
80 /* Each TWL device typically has more than one I2C address */
81 #define TWL_MAX_SUBADDRS            4
82 
83 /* The maxium number of bytes that can be written in one call */
84 #define TWL_MAX_IIC_DATA_SIZE       63
85 
86 /* The TWL devices typically use 4 I2C address for the different internal
87  * register sets, plus one SmartReflex I2C address.
88  */
89 #define TWL_CHIP_ID0                0x48
90 #define TWL_CHIP_ID1                0x49
91 #define TWL_CHIP_ID2                0x4A
92 #define TWL_CHIP_ID3                0x4B
93 
94 #define TWL_SMARTREFLEX_CHIP_ID     0x12
95 
96 #define TWL_INVALID_CHIP_ID         0xff
97 
98 struct twl_softc {
99 	device_t		sc_dev;
100 	struct mtx		sc_mtx;
101 	unsigned int	sc_type;
102 
103 	uint8_t			sc_subaddr_map[TWL_MAX_SUBADDRS];
104 
105 	struct intr_config_hook	sc_scan_hook;
106 
107 	device_t		sc_vreg;
108 	device_t		sc_clks;
109 };
110 
111 /**
112  *	Macros for driver mutex locking
113  */
114 #define TWL_LOCK(_sc)             mtx_lock(&(_sc)->sc_mtx)
115 #define	TWL_UNLOCK(_sc)           mtx_unlock(&(_sc)->sc_mtx)
116 #define TWL_LOCK_INIT(_sc) \
117 	mtx_init(&_sc->sc_mtx, device_get_nameunit(_sc->sc_dev), \
118 	         "twl", MTX_DEF)
119 #define TWL_LOCK_DESTROY(_sc)     mtx_destroy(&_sc->sc_mtx);
120 #define TWL_ASSERT_LOCKED(_sc)    mtx_assert(&_sc->sc_mtx, MA_OWNED);
121 #define TWL_ASSERT_UNLOCKED(_sc)  mtx_assert(&_sc->sc_mtx, MA_NOTOWNED);
122 
123 
124 /**
125  *	twl_is_4030 - returns true if the device is TWL4030
126  *	twl_is_6025 - returns true if the device is TWL6025
127  *	twl_is_6030 - returns true if the device is TWL6030
128  *	@sc: device soft context
129  *
130  *	Returns a non-zero value if the device matches.
131  *
132  *	RETURNS:
133  *	Returns a non-zero value if the device matches, otherwise zero.
134  */
135 int
136 twl_is_4030(device_t dev)
137 {
138 	struct twl_softc *sc = device_get_softc(dev);
139 	return (sc->sc_type == TWL_DEVICE_4030);
140 }
141 
142 int
143 twl_is_6025(device_t dev)
144 {
145 	struct twl_softc *sc = device_get_softc(dev);
146 	return (sc->sc_type == TWL_DEVICE_6025);
147 }
148 
149 int
150 twl_is_6030(device_t dev)
151 {
152 	struct twl_softc *sc = device_get_softc(dev);
153 	return (sc->sc_type == TWL_DEVICE_6030);
154 }
155 
156 
157 /**
158  *	twl_read - read one or more registers from the TWL device
159  *	@sc: device soft context
160  *	@nsub: the sub-module to read from
161  *	@reg: the register offset within the module to read
162  *	@buf: buffer to store the bytes in
163  *	@cnt: the number of bytes to read
164  *
165  *	Reads one or more registers and stores the result in the suppled buffer.
166  *
167  *	RETURNS:
168  *	Zero on success or an error code on failure.
169  */
170 int
171 twl_read(device_t dev, uint8_t nsub, uint8_t reg, uint8_t *buf, uint16_t cnt)
172 {
173 	struct twl_softc *sc;
174 	struct iic_msg msg[2];
175 	uint8_t addr;
176 	int rc;
177 
178 	sc = device_get_softc(dev);
179 
180 	TWL_LOCK(sc);
181 	addr = sc->sc_subaddr_map[nsub];
182 	TWL_UNLOCK(sc);
183 
184 	if (addr == TWL_INVALID_CHIP_ID)
185 		return (EIO);
186 
187 
188 	/* Set the address to read from */
189 	msg[0].slave = addr;
190 	msg[0].flags = IIC_M_WR | IIC_M_NOSTOP;
191 	msg[0].len = 1;
192 	msg[0].buf = &reg;
193 	/* Read the data back */
194 	msg[1].slave = addr;
195 	msg[1].flags = IIC_M_RD;
196 	msg[1].len = cnt;
197 	msg[1].buf = buf;
198 
199 	rc = iicbus_transfer(dev, msg, 2);
200 	if (rc != 0) {
201 		device_printf(dev, "iicbus read failed (adr:0x%02x, reg:0x%02x)\n",
202 		              addr, reg);
203 		return (EIO);
204 	}
205 
206 	return (0);
207 }
208 
209 /**
210  *	twl_write - writes one or more registers to the TWL device
211  *	@sc: device soft context
212  *	@nsub: the sub-module to read from
213  *	@reg: the register offset within the module to read
214  *	@buf: data to write
215  *	@cnt: the number of bytes to write
216  *
217  *	Writes one or more registers.
218  *
219  *	RETURNS:
220  *	Zero on success or a negative error code on failure.
221  */
222 int
223 twl_write(device_t dev, uint8_t nsub, uint8_t reg, uint8_t *buf, uint16_t cnt)
224 {
225 	struct twl_softc *sc;
226 	struct iic_msg msg;
227 	uint8_t addr;
228 	uint8_t tmp_buf[TWL_MAX_IIC_DATA_SIZE + 1];
229 	int rc;
230 
231 	if (cnt > TWL_MAX_IIC_DATA_SIZE)
232 		return (ENOMEM);
233 
234 	/* Set the register address as the first byte */
235 	tmp_buf[0] = reg;
236 	memcpy(&tmp_buf[1], buf, cnt);
237 
238 	sc = device_get_softc(dev);
239 
240 	TWL_LOCK(sc);
241 	addr = sc->sc_subaddr_map[nsub];
242 	TWL_UNLOCK(sc);
243 
244 	if (addr == TWL_INVALID_CHIP_ID)
245 		return (EIO);
246 
247 
248 	/* Setup the transfer and execute it */
249 	msg.slave = addr;
250 	msg.flags = IIC_M_WR;
251 	msg.len = cnt + 1;
252 	msg.buf = tmp_buf;
253 
254 	rc = iicbus_transfer(dev, &msg, 1);
255 	if (rc != 0) {
256 		device_printf(sc->sc_dev, "iicbus write failed (adr:0x%02x, reg:0x%02x)\n",
257 		              addr, reg);
258 		return (EIO);
259 	}
260 
261 	return (0);
262 }
263 
264 /**
265  *	twl_test_present - checks if a device with given address is present
266  *	@sc: device soft context
267  *	@addr: the address of the device to scan for
268  *
269  *	Sends just the address byte and checks for an ACK. If no ACK then device
270  *	is assumed to not be present.
271  *
272  *	RETURNS:
273  *	EIO if device is not present, otherwise 0 is returned.
274  */
275 static int
276 twl_test_present(struct twl_softc *sc, uint8_t addr)
277 {
278 	struct iic_msg msg;
279 	uint8_t tmp;
280 
281 	/* Set the address to read from */
282 	msg.slave = addr;
283 	msg.flags = IIC_M_RD;
284 	msg.len = 1;
285 	msg.buf = &tmp;
286 
287 	if (iicbus_transfer(sc->sc_dev, &msg, 1) != 0)
288 		return (EIO);
289 
290 	return (0);
291 }
292 
293 /**
294  *	twl_scan - scans the i2c bus for sub modules
295  *	@dev: the twl device
296  *
297  *	TWL devices don't just have one i2c slave address, rather they have up to
298  *	5 other addresses, each is for separate modules within the device. This
299  *	function scans the bus for 4 possible sub-devices and stores the info
300  *	internally.
301  *
302  */
303 static void
304 twl_scan(void *dev)
305 {
306 	struct twl_softc *sc;
307 	unsigned i;
308 	uint8_t devs[TWL_MAX_SUBADDRS];
309 	uint8_t base = TWL_CHIP_ID0;
310 
311 	sc = device_get_softc((device_t)dev);
312 
313 	memset(devs, TWL_INVALID_CHIP_ID, TWL_MAX_SUBADDRS);
314 
315 	/* Try each of the addresses (0x48, 0x49, 0x4a & 0x4b) to determine which
316 	 * sub modules we have.
317 	 */
318 	for (i = 0; i < TWL_MAX_SUBADDRS; i++) {
319 		if (twl_test_present(sc, (base + i)) == 0) {
320 			devs[i] = (base + i);
321 			device_printf(sc->sc_dev, "Found (sub)device at 0x%02x\n", (base + i));
322 		}
323 	}
324 
325 	TWL_LOCK(sc);
326 	memcpy(sc->sc_subaddr_map, devs, TWL_MAX_SUBADDRS);
327 	TWL_UNLOCK(sc);
328 
329 	/* Finished with the interrupt hook */
330 	config_intrhook_disestablish(&sc->sc_scan_hook);
331 }
332 
333 /**
334  *	twl_probe -
335  *	@dev: the twl device
336  *
337  *	Scans the FDT for a match for the device, possible compatible device
338  *	strings are; "ti,twl6030", "ti,twl6025", "ti,twl4030".
339  *
340  *	The FDT compat string also determines the type of device (it is currently
341  *	not possible to dynamically determine the device type).
342  *
343  */
344 static int
345 twl_probe(device_t dev)
346 {
347 	phandle_t node;
348 	const char *compat;
349 	int len, l;
350 	struct twl_softc *sc;
351 
352 	if ((compat = ofw_bus_get_compat(dev)) == NULL)
353 		return (ENXIO);
354 
355 	if ((node = ofw_bus_get_node(dev)) == 0)
356 		return (ENXIO);
357 
358 	/* Get total 'compatible' prop len */
359 	if ((len = OF_getproplen(node, "compatible")) <= 0)
360 		return (ENXIO);
361 
362 	sc = device_get_softc(dev);
363 	sc->sc_dev = dev;
364 	sc->sc_type = TWL_DEVICE_UNKNOWN;
365 
366 	while (len > 0) {
367 		if (strncasecmp(compat, "ti,twl6030", 10) == 0)
368 			sc->sc_type = TWL_DEVICE_6030;
369 		else if (strncasecmp(compat, "ti,twl6025", 10) == 0)
370 			sc->sc_type = TWL_DEVICE_6025;
371 		else if (strncasecmp(compat, "ti,twl4030", 10) == 0)
372 			sc->sc_type = TWL_DEVICE_4030;
373 
374 		if (sc->sc_type != TWL_DEVICE_UNKNOWN)
375 			break;
376 
377 		/* Slide to the next sub-string. */
378 		l = strlen(compat) + 1;
379 		compat += l;
380 		len -= l;
381 	}
382 
383 	switch (sc->sc_type) {
384 	case TWL_DEVICE_4030:
385 		device_set_desc(dev, "TI TWL4030/TPS659x0 Companion IC");
386 		break;
387 	case TWL_DEVICE_6025:
388 		device_set_desc(dev, "TI TWL6025 Companion IC");
389 		break;
390 	case TWL_DEVICE_6030:
391 		device_set_desc(dev, "TI TWL6030 Companion IC");
392 		break;
393 	case TWL_DEVICE_UNKNOWN:
394 	default:
395 		return (ENXIO);
396 	}
397 
398 	return (0);
399 }
400 
401 static int
402 twl_attach(device_t dev)
403 {
404 	struct twl_softc *sc;
405 
406 	sc = device_get_softc(dev);
407 	sc->sc_dev = dev;
408 
409 	TWL_LOCK_INIT(sc);
410 
411 	/* We have to wait until interrupts are enabled. I2C read and write
412 	 * only works if the interrupts are available.
413 	 */
414 	sc->sc_scan_hook.ich_func = twl_scan;
415 	sc->sc_scan_hook.ich_arg = dev;
416 
417 	if (config_intrhook_establish(&sc->sc_scan_hook) != 0)
418 		return (ENOMEM);
419 
420 	/* FIXME: should be in DTS file */
421 	if ((sc->sc_vreg = device_add_child(dev, "twl_vreg", -1)) == NULL)
422 		device_printf(dev, "could not allocate twl_vreg instance\n");
423 	if ((sc->sc_clks = device_add_child(dev, "twl_clks", -1)) == NULL)
424 		device_printf(dev, "could not allocate twl_clks instance\n");
425 
426 	return (bus_generic_attach(dev));
427 }
428 
429 static int
430 twl_detach(device_t dev)
431 {
432 	struct twl_softc *sc;
433 
434 	sc = device_get_softc(dev);
435 
436 	if (sc->sc_vreg)
437 		device_delete_child(dev, sc->sc_vreg);
438 	if (sc->sc_clks)
439 		device_delete_child(dev, sc->sc_clks);
440 
441 
442 	TWL_LOCK_DESTROY(sc);
443 
444 	return (0);
445 }
446 
447 static device_method_t twl_methods[] = {
448 	DEVMETHOD(device_probe,		twl_probe),
449 	DEVMETHOD(device_attach,	twl_attach),
450 	DEVMETHOD(device_detach,	twl_detach),
451 
452 	{0, 0},
453 };
454 
455 static driver_t twl_driver = {
456 	"twl",
457 	twl_methods,
458 	sizeof(struct twl_softc),
459 };
460 static devclass_t twl_devclass;
461 
462 DRIVER_MODULE(twl, iicbus, twl_driver, twl_devclass, 0, 0);
463 MODULE_VERSION(twl, 1);
464