xref: /freebsd/sys/arm/ti/ti_edma3.c (revision f0cfa1b168014f56c02b83e5f28412cc5f78d117)
1 /*-
2  * SPDX-License-Identifier: BSD-3-Clause
3  *
4  * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
5  * Copyright (c) 2012 Damjan Marion <dmarion@Freebsd.org>
6  * All rights reserved.
7  *
8  * Redistribution and use in source and binary forms, with or without
9  * modification, are permitted provided that the following conditions
10  * are met:
11  * 1. Redistributions of source code must retain the above copyright
12  *    notice, this list of conditions and the following disclaimer.
13  * 2. Redistributions in binary form must reproduce the above copyright
14  *    notice, this list of conditions and the following disclaimer in the
15  *    documentation and/or other materials provided with the distribution.
16  * 3. Neither the name of authors nor the names of its contributors may be
17  *    used to endorse or promote products derived from this software without
18  *    specific prior written permission.
19  *
20  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
21  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
22  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
23  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
24  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
25  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
26  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
27  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
28  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
29  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
30  * SUCH DAMAGE.
31  */
32 
33 #include <sys/cdefs.h>
34 __FBSDID("$FreeBSD$");
35 
36 #include <sys/param.h>
37 #include <sys/systm.h>
38 #include <sys/endian.h>
39 #include <sys/mbuf.h>
40 #include <sys/lock.h>
41 #include <sys/mutex.h>
42 #include <sys/kernel.h>
43 #include <sys/module.h>
44 #include <sys/socket.h>
45 #include <sys/sysctl.h>
46 
47 #include <sys/sockio.h>
48 #include <sys/bus.h>
49 #include <machine/bus.h>
50 #include <sys/rman.h>
51 #include <machine/resource.h>
52 
53 #include <dev/ofw/ofw_bus.h>
54 #include <dev/ofw/ofw_bus_subr.h>
55 
56 #include <arm/ti/ti_scm.h>
57 #include <arm/ti/ti_prcm.h>
58 
59 #include <arm/ti/ti_edma3.h>
60 
61 #define TI_EDMA3_NUM_TCS		3
62 #define TI_EDMA3_NUM_IRQS		3
63 #define TI_EDMA3_NUM_DMA_CHS		64
64 #define TI_EDMA3_NUM_QDMA_CHS		8
65 
66 #define TI_EDMA3CC_PID			0x000
67 #define TI_EDMA3CC_DCHMAP(p)		(0x100 + ((p)*4))
68 #define TI_EDMA3CC_DMAQNUM(n)		(0x240 + ((n)*4))
69 #define TI_EDMA3CC_QDMAQNUM		0x260
70 #define TI_EDMA3CC_EMCR			0x308
71 #define TI_EDMA3CC_EMCRH		0x30C
72 #define TI_EDMA3CC_QEMCR		0x314
73 #define TI_EDMA3CC_CCERR		0x318
74 #define TI_EDMA3CC_CCERRCLR		0x31C
75 #define TI_EDMA3CC_DRAE(p)		(0x340 + ((p)*8))
76 #define TI_EDMA3CC_DRAEH(p)		(0x344 + ((p)*8))
77 #define TI_EDMA3CC_QRAE(p)		(0x380 + ((p)*4))
78 #define TI_EDMA3CC_S_ESR(p)		(0x2010 + ((p)*0x200))
79 #define TI_EDMA3CC_S_ESRH(p)		(0x2014 + ((p)*0x200))
80 #define TI_EDMA3CC_S_SECR(p)		(0x2040 + ((p)*0x200))
81 #define TI_EDMA3CC_S_SECRH(p)		(0x2044 + ((p)*0x200))
82 #define TI_EDMA3CC_S_EESR(p)		(0x2030 + ((p)*0x200))
83 #define TI_EDMA3CC_S_EESRH(p)		(0x2034 + ((p)*0x200))
84 #define TI_EDMA3CC_S_IESR(p)		(0x2060 + ((p)*0x200))
85 #define TI_EDMA3CC_S_IESRH(p)		(0x2064 + ((p)*0x200))
86 #define TI_EDMA3CC_S_IPR(p)		(0x2068 + ((p)*0x200))
87 #define TI_EDMA3CC_S_IPRH(p)		(0x206C + ((p)*0x200))
88 #define TI_EDMA3CC_S_QEESR(p)		(0x208C + ((p)*0x200))
89 
90 #define TI_EDMA3CC_PARAM_OFFSET		0x4000
91 #define TI_EDMA3CC_OPT(p)		(TI_EDMA3CC_PARAM_OFFSET + 0x0 + ((p)*0x20))
92 
93 #define TI_EDMA3CC_DMAQNUM_SET(c,q)	((0x7 & (q)) << (((c) % 8) * 4))
94 #define TI_EDMA3CC_DMAQNUM_CLR(c)	(~(0x7 << (((c) % 8) * 4)))
95 #define TI_EDMA3CC_QDMAQNUM_SET(c,q)	((0x7 & (q)) << ((c) * 4))
96 #define TI_EDMA3CC_QDMAQNUM_CLR(c)	(~(0x7 << ((c) * 4)))
97 
98 #define TI_EDMA3CC_OPT_TCC_CLR		(~(0x3F000))
99 #define TI_EDMA3CC_OPT_TCC_SET(p)	(((0x3F000 >> 12) & (p)) << 12)
100 
101 struct ti_edma3_softc {
102 	device_t		sc_dev;
103 	/*
104 	 * We use one-element array in case if we need to add
105 	 * mem resources for transfer control windows
106 	 */
107 	struct resource *	mem_res[1];
108 	struct resource *	irq_res[TI_EDMA3_NUM_IRQS];
109 	void			*ih_cookie[TI_EDMA3_NUM_IRQS];
110 };
111 
112 static struct ti_edma3_softc *ti_edma3_sc = NULL;
113 
114 static struct resource_spec ti_edma3_mem_spec[] = {
115 	{ SYS_RES_MEMORY,   0,  RF_ACTIVE },
116 	{ -1,               0,  0 }
117 };
118 static struct resource_spec ti_edma3_irq_spec[] = {
119 	{ SYS_RES_IRQ,      0,  RF_ACTIVE },
120 	{ SYS_RES_IRQ,      1,  RF_ACTIVE },
121 	{ SYS_RES_IRQ,      2,  RF_ACTIVE },
122 	{ -1,               0,  0 }
123 };
124 
125 /* Read/Write macros */
126 #define ti_edma3_cc_rd_4(reg)		bus_read_4(ti_edma3_sc->mem_res[0], reg)
127 #define ti_edma3_cc_wr_4(reg, val)	bus_write_4(ti_edma3_sc->mem_res[0], reg, val)
128 
129 static void ti_edma3_intr_comp(void *arg);
130 static void ti_edma3_intr_mperr(void *arg);
131 static void ti_edma3_intr_err(void *arg);
132 
133 static struct {
134 	driver_intr_t *handler;
135 	char * description;
136 } ti_edma3_intrs[TI_EDMA3_NUM_IRQS] = {
137 	{ ti_edma3_intr_comp,	"EDMA Completion Interrupt" },
138 	{ ti_edma3_intr_mperr,	"EDMA Memory Protection Error Interrupt" },
139 	{ ti_edma3_intr_err,	"EDMA Error Interrupt" },
140 };
141 
142 static int
143 ti_edma3_probe(device_t dev)
144 {
145 
146 	if (!ofw_bus_status_okay(dev))
147 		return (ENXIO);
148 
149 	if (!ofw_bus_is_compatible(dev, "ti,edma3"))
150 		return (ENXIO);
151 
152 	device_set_desc(dev, "TI EDMA Controller");
153 	return (0);
154 }
155 
156 static int
157 ti_edma3_attach(device_t dev)
158 {
159 	struct ti_edma3_softc *sc = device_get_softc(dev);
160 	uint32_t reg;
161 	int err;
162 	int i;
163 
164 	if (ti_edma3_sc)
165 		return (ENXIO);
166 
167 	ti_edma3_sc = sc;
168 	sc->sc_dev = dev;
169 
170 	/* Request the memory resources */
171 	err = bus_alloc_resources(dev, ti_edma3_mem_spec, sc->mem_res);
172 	if (err) {
173 		device_printf(dev, "Error: could not allocate mem resources\n");
174 		return (ENXIO);
175 	}
176 
177 	/* Request the IRQ resources */
178 	err = bus_alloc_resources(dev, ti_edma3_irq_spec, sc->irq_res);
179 	if (err) {
180 		device_printf(dev, "Error: could not allocate irq resources\n");
181 		return (ENXIO);
182 	}
183 
184 	/* Enable Channel Controller */
185 	ti_prcm_clk_enable(EDMA_TPCC_CLK);
186 
187 	reg = ti_edma3_cc_rd_4(TI_EDMA3CC_PID);
188 
189 	device_printf(dev, "EDMA revision %08x\n", reg);
190 
191 
192 	/* Attach interrupt handlers */
193 	for (i = 0; i < TI_EDMA3_NUM_IRQS; ++i) {
194 		err = bus_setup_intr(dev, sc->irq_res[i], INTR_TYPE_MISC |
195 		    INTR_MPSAFE, NULL, *ti_edma3_intrs[i].handler,
196 		    sc, &sc->ih_cookie[i]);
197 		if (err) {
198 			device_printf(dev, "could not setup %s\n",
199 			    ti_edma3_intrs[i].description);
200 			return (err);
201 		}
202 	}
203 
204 	return (0);
205 }
206 
207 static device_method_t ti_edma3_methods[] = {
208 	DEVMETHOD(device_probe, ti_edma3_probe),
209 	DEVMETHOD(device_attach, ti_edma3_attach),
210 	{0, 0},
211 };
212 
213 static driver_t ti_edma3_driver = {
214 	"ti_edma3",
215 	ti_edma3_methods,
216 	sizeof(struct ti_edma3_softc),
217 };
218 static devclass_t ti_edma3_devclass;
219 
220 DRIVER_MODULE(ti_edma3, simplebus, ti_edma3_driver, ti_edma3_devclass, 0, 0);
221 MODULE_DEPEND(ti_edma3, ti_prcm, 1, 1, 1);
222 
223 static void
224 ti_edma3_intr_comp(void *arg)
225 {
226 	printf("%s: unimplemented\n", __func__);
227 }
228 
229 static void
230 ti_edma3_intr_mperr(void *arg)
231 {
232 	printf("%s: unimplemented\n", __func__);
233 }
234 
235 static void
236 ti_edma3_intr_err(void *arg)
237 {
238 	printf("%s: unimplemented\n", __func__);
239 }
240 
241 void
242 ti_edma3_init(unsigned int eqn)
243 {
244 	uint32_t reg;
245 	int i;
246 
247 	/* on AM335x Event queue 0 is always mapped to Transfer Controller 0,
248 	 * event queue 1 to TC2, etc. So we are asking PRCM to power on specific
249 	 * TC based on what event queue we need to initialize */
250 	ti_prcm_clk_enable(EDMA_TPTC0_CLK + eqn);
251 
252 	/* Clear Event Missed Regs */
253 	ti_edma3_cc_wr_4(TI_EDMA3CC_EMCR, 0xFFFFFFFF);
254 	ti_edma3_cc_wr_4(TI_EDMA3CC_EMCRH, 0xFFFFFFFF);
255 	ti_edma3_cc_wr_4(TI_EDMA3CC_QEMCR, 0xFFFFFFFF);
256 
257 	/* Clear Error Reg */
258 	ti_edma3_cc_wr_4(TI_EDMA3CC_CCERRCLR, 0xFFFFFFFF);
259 
260 	/* Enable DMA channels 0-63 */
261 	ti_edma3_cc_wr_4(TI_EDMA3CC_DRAE(0), 0xFFFFFFFF);
262 	ti_edma3_cc_wr_4(TI_EDMA3CC_DRAEH(0), 0xFFFFFFFF);
263 
264 	for (i = 0; i < 64; i++) {
265 		ti_edma3_cc_wr_4(TI_EDMA3CC_DCHMAP(i), i<<5);
266 	}
267 
268 	/* Initialize the DMA Queue Number Registers */
269 	for (i = 0; i < TI_EDMA3_NUM_DMA_CHS; i++) {
270 		reg = ti_edma3_cc_rd_4(TI_EDMA3CC_DMAQNUM(i>>3));
271 		reg &= TI_EDMA3CC_DMAQNUM_CLR(i);
272 		reg |= TI_EDMA3CC_DMAQNUM_SET(i, eqn);
273 		ti_edma3_cc_wr_4(TI_EDMA3CC_DMAQNUM(i>>3), reg);
274 	}
275 
276 	/* Enable the QDMA Region access for all channels */
277 	ti_edma3_cc_wr_4(TI_EDMA3CC_QRAE(0), (1 << TI_EDMA3_NUM_QDMA_CHS) - 1);
278 
279 	/*Initialize QDMA Queue Number Registers */
280 	for (i = 0; i < TI_EDMA3_NUM_QDMA_CHS; i++) {
281 		reg = ti_edma3_cc_rd_4(TI_EDMA3CC_QDMAQNUM);
282 		reg &= TI_EDMA3CC_QDMAQNUM_CLR(i);
283 		reg |= TI_EDMA3CC_QDMAQNUM_SET(i, eqn);
284 		ti_edma3_cc_wr_4(TI_EDMA3CC_QDMAQNUM, reg);
285 	}
286 }
287 
288 #ifdef notyet
289 int
290 ti_edma3_enable_event_intr(unsigned int ch)
291 {
292 	uint32_t reg;
293 
294 	if (ch >= TI_EDMA3_NUM_DMA_CHS)
295 		return (EINVAL);
296 
297 	if (ch < 32) {
298 		ti_edma3_cc_wr_4(TI_EDMA3CC_S_IESR(0), 1 << ch);
299 	} else {
300 		ti_edma3_cc_wr_4(TI_EDMA3CC_S_IESRH(0), 1 << (ch - 32));
301 	}
302 	return 0;
303 }
304 #endif
305 
306 int
307 ti_edma3_request_dma_ch(unsigned int ch, unsigned int tccn, unsigned int eqn)
308 {
309 	uint32_t reg;
310 
311 	if (ch >= TI_EDMA3_NUM_DMA_CHS)
312 		return (EINVAL);
313 
314 	/* Enable the DMA channel in the DRAE/DRAEH registers */
315 	if (ch < 32) {
316 		reg = ti_edma3_cc_rd_4(TI_EDMA3CC_DRAE(0));
317 		reg |= (0x01 << ch);
318 		ti_edma3_cc_wr_4(TI_EDMA3CC_DRAE(0), reg);
319 	} else {
320 		reg = ti_edma3_cc_rd_4(TI_EDMA3CC_DRAEH(0));
321 		reg |= (0x01 << (ch - 32));
322 		ti_edma3_cc_wr_4(TI_EDMA3CC_DRAEH(0), reg);
323 	}
324 
325 	/* Associate DMA Channel to Event Queue */
326 	reg = ti_edma3_cc_rd_4(TI_EDMA3CC_DMAQNUM(ch >> 3));
327 	reg &= TI_EDMA3CC_DMAQNUM_CLR(ch);
328 	reg |= TI_EDMA3CC_DMAQNUM_SET((ch), eqn);
329 	ti_edma3_cc_wr_4(TI_EDMA3CC_DMAQNUM(ch >> 3), reg);
330 
331 	/* Set TCC in corresponding PaRAM Entry */
332 	reg = ti_edma3_cc_rd_4(TI_EDMA3CC_OPT(ch));
333 	reg &= TI_EDMA3CC_OPT_TCC_CLR;
334 	reg |= TI_EDMA3CC_OPT_TCC_SET(ch);
335 	ti_edma3_cc_wr_4(TI_EDMA3CC_OPT(ch), reg);
336 
337 	return 0;
338 }
339 
340 int
341 ti_edma3_request_qdma_ch(unsigned int ch, unsigned int tccn, unsigned int eqn)
342 {
343 	uint32_t reg;
344 
345 	if (ch >= TI_EDMA3_NUM_DMA_CHS)
346 		return (EINVAL);
347 
348 	/* Enable the QDMA channel in the QRAE registers */
349 	reg = ti_edma3_cc_rd_4(TI_EDMA3CC_QRAE(0));
350 	reg |= (0x01 << ch);
351 	ti_edma3_cc_wr_4(TI_EDMA3CC_QRAE(0), reg);
352 
353 	/* Associate QDMA Channel to Event Queue */
354 	reg = ti_edma3_cc_rd_4(TI_EDMA3CC_QDMAQNUM);
355 	reg |= TI_EDMA3CC_QDMAQNUM_SET(ch, eqn);
356 	ti_edma3_cc_wr_4(TI_EDMA3CC_QDMAQNUM, reg);
357 
358 	/* Set TCC in corresponding PaRAM Entry */
359 	reg = ti_edma3_cc_rd_4(TI_EDMA3CC_OPT(ch));
360 	reg &= TI_EDMA3CC_OPT_TCC_CLR;
361 	reg |= TI_EDMA3CC_OPT_TCC_SET(ch);
362 	ti_edma3_cc_wr_4(TI_EDMA3CC_OPT(ch), reg);
363 
364 	return 0;
365 }
366 
367 int
368 ti_edma3_enable_transfer_manual(unsigned int ch)
369 {
370 	if (ch >= TI_EDMA3_NUM_DMA_CHS)
371 		return (EINVAL);
372 
373 	/* set corresponding bit in ESR/ESRH to set a event */
374 	if (ch < 32) {
375 		ti_edma3_cc_wr_4(TI_EDMA3CC_S_ESR(0), 1 <<  ch);
376 	} else {
377 		ti_edma3_cc_wr_4(TI_EDMA3CC_S_ESRH(0), 1 <<  (ch - 32));
378 	}
379 
380 	return 0;
381 }
382 
383 int
384 ti_edma3_enable_transfer_qdma(unsigned int ch)
385 {
386 	if (ch >= TI_EDMA3_NUM_QDMA_CHS)
387 		return (EINVAL);
388 
389 	/* set corresponding bit in QEESR to enable QDMA event */
390 	ti_edma3_cc_wr_4(TI_EDMA3CC_S_QEESR(0), (1 << ch));
391 
392 	return 0;
393 }
394 
395 int
396 ti_edma3_enable_transfer_event(unsigned int ch)
397 {
398 	if (ch >= TI_EDMA3_NUM_DMA_CHS)
399 		return (EINVAL);
400 
401 	/* Clear SECR(H) & EMCR(H) to clean any previous NULL request
402 	 * and set corresponding bit in EESR to enable DMA event */
403 	if(ch < 32) {
404 		ti_edma3_cc_wr_4(TI_EDMA3CC_S_SECR(0), (1 << ch));
405 		ti_edma3_cc_wr_4(TI_EDMA3CC_EMCR, (1 << ch));
406 		ti_edma3_cc_wr_4(TI_EDMA3CC_S_EESR(0), (1 << ch));
407 	} else {
408 		ti_edma3_cc_wr_4(TI_EDMA3CC_S_SECRH(0), 1 << (ch - 32));
409 		ti_edma3_cc_wr_4(TI_EDMA3CC_EMCRH, 1 << (ch - 32));
410 		ti_edma3_cc_wr_4(TI_EDMA3CC_S_EESRH(0), 1 << (ch - 32));
411 	}
412 
413 	return 0;
414 }
415 
416 void
417 ti_edma3_param_write(unsigned int ch, struct ti_edma3cc_param_set *prs)
418 {
419 	bus_write_region_4(ti_edma3_sc->mem_res[0], TI_EDMA3CC_OPT(ch),
420 	    (uint32_t *) prs, 8);
421 }
422 
423 void
424 ti_edma3_param_read(unsigned int ch, struct ti_edma3cc_param_set *prs)
425 {
426 	bus_read_region_4(ti_edma3_sc->mem_res[0], TI_EDMA3CC_OPT(ch),
427 	    (uint32_t *) prs, 8);
428 }
429