xref: /freebsd/sys/arm/ti/omap4/omap4_gpio.c (revision 43a5ec4eb41567cc92586503212743d89686d78f)
1 /*-
2  * Copyright (c) 2011 Ben Gray <ben.r.gray@gmail.com>.
3  * Copyright (c) 2014 Andrew Turner <andrew@FreeBSD.org>
4  * All rights reserved.
5  *
6  * Redistribution and use in source and binary forms, with or without
7  * modification, are permitted provided that the following conditions
8  * are met:
9  * 1. Redistributions of source code must retain the above copyright
10  *    notice, this list of conditions and the following disclaimer.
11  * 2. Redistributions in binary form must reproduce the above copyright
12  *    notice, this list of conditions and the following disclaimer in the
13  *    documentation and/or other materials provided with the distribution.
14  * 3. The name of the company nor the name of the author may be used to
15  *    endorse or promote products derived from this software without specific
16  *    prior written permission.
17  *
18  * THIS SOFTWARE IS PROVIDED BY BEN GRAY ``AS IS'' AND ANY EXPRESS OR
19  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
20  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
21  * IN NO EVENT SHALL BEN GRAY BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
22  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
23  * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
24  * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
25  * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
26  * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
27  * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
28  */
29 #include <sys/cdefs.h>
30 __FBSDID("$FreeBSD$");
31 
32 #include <sys/param.h>
33 #include <sys/systm.h>
34 #include <sys/kernel.h>
35 #include <sys/module.h>
36 #include <sys/bus.h>
37 #include <sys/gpio.h>
38 
39 #include <machine/bus.h>
40 #include <machine/intr.h>
41 
42 #include <dev/ofw/ofw_bus.h>
43 #include <dev/ofw/ofw_bus_subr.h>
44 
45 #include <arm/ti/ti_cpuid.h>
46 #include <arm/ti/ti_gpio.h>
47 #include <arm/ti/ti_pinmux.h>
48 
49 #include <arm/ti/omap4/omap4_scm_padconf.h>
50 
51 #include "ti_gpio_if.h"
52 
53 static struct ofw_compat_data compat_data[] = {
54 	{"ti,omap4-gpio",	1},
55 	{"ti,gpio",		1},
56 	{NULL,			0},
57 };
58 
59 static int
60 omap4_gpio_probe(device_t dev)
61 {
62 
63 	if (!ofw_bus_status_okay(dev))
64 		return (ENXIO);
65 
66 	if (ofw_bus_search_compatible(dev, compat_data)->ocd_data == 0)
67 		return (ENXIO);
68 	if (ti_chip() != CHIP_OMAP_4)
69 		return (ENXIO);
70 
71 	device_set_desc(dev, "TI OMAP4 General Purpose I/O (GPIO)");
72 
73 	return (0);
74 }
75 
76 static int
77 omap4_gpio_set_flags(device_t dev, uint32_t gpio, uint32_t flags)
78 {
79 	unsigned int state = 0;
80 	struct ti_gpio_softc *sc;
81 
82 	sc = device_get_softc(dev);
83 	/* First the SCM driver needs to be told to put the pad into GPIO mode */
84 	if (flags & GPIO_PIN_OUTPUT)
85 		state = PADCONF_PIN_OUTPUT;
86 	else if (flags & GPIO_PIN_INPUT) {
87 		if (flags & GPIO_PIN_PULLUP)
88 			state = PADCONF_PIN_INPUT_PULLUP;
89 		else if (flags & GPIO_PIN_PULLDOWN)
90 			state = PADCONF_PIN_INPUT_PULLDOWN;
91 		else
92 			state = PADCONF_PIN_INPUT;
93 	}
94 	return ti_pinmux_padconf_set_gpiomode((sc->sc_bank-1)*32 + gpio, state);
95 }
96 
97 static int
98 omap4_gpio_get_flags(device_t dev, uint32_t gpio, uint32_t *flags)
99 {
100 	unsigned int state;
101 	struct ti_gpio_softc *sc;
102 
103 	sc = device_get_softc(dev);
104 
105 	/* Get the current pin state */
106 	if (ti_pinmux_padconf_get_gpiomode((sc->sc_bank-1)*32 + gpio, &state) != 0) {
107 		*flags = 0;
108 		return (EINVAL);
109 	} else {
110 		switch (state) {
111 			case PADCONF_PIN_OUTPUT:
112 				*flags = GPIO_PIN_OUTPUT;
113 				break;
114 			case PADCONF_PIN_INPUT:
115 				*flags = GPIO_PIN_INPUT;
116 				break;
117 			case PADCONF_PIN_INPUT_PULLUP:
118 				*flags = GPIO_PIN_INPUT | GPIO_PIN_PULLUP;
119 				break;
120 			case PADCONF_PIN_INPUT_PULLDOWN:
121 				*flags = GPIO_PIN_INPUT | GPIO_PIN_PULLDOWN;
122 				break;
123 			default:
124 				*flags = 0;
125 				break;
126 		}
127 	}
128 
129 	return (0);
130 }
131 
132 static device_method_t omap4_gpio_methods[] = {
133 	/* bus interface */
134 	DEVMETHOD(device_probe, omap4_gpio_probe),
135 
136 	/* ti_gpio interface */
137 	DEVMETHOD(ti_gpio_set_flags, omap4_gpio_set_flags),
138 	DEVMETHOD(ti_gpio_get_flags, omap4_gpio_get_flags),
139 
140 	DEVMETHOD_END
141 };
142 
143 extern driver_t ti_gpio_driver;
144 static devclass_t omap4_gpio_devclass;
145 
146 DEFINE_CLASS_1(gpio, omap4_gpio_driver, omap4_gpio_methods,
147     sizeof(struct ti_gpio_softc), ti_gpio_driver);
148 DRIVER_MODULE(omap4_gpio, simplebus, omap4_gpio_driver, omap4_gpio_devclass,
149     0, 0);
150