1 /*- 2 * Copyright 2013 Oleksandr Tymoshenko <gonzo@freebsd.org> 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 15 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 16 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 17 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 18 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 19 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 20 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 21 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 22 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 23 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 24 * SUCH DAMAGE. 25 */ 26 27 #include <sys/cdefs.h> 28 __FBSDID("$FreeBSD$"); 29 30 #include <sys/param.h> 31 #include <sys/systm.h> 32 #include <sys/kernel.h> 33 #include <sys/module.h> 34 #include <sys/clock.h> 35 #include <sys/time.h> 36 #include <sys/bus.h> 37 #include <sys/lock.h> 38 #include <sys/mutex.h> 39 #include <sys/resource.h> 40 #include <sys/rman.h> 41 #include <sys/sysctl.h> 42 #include <vm/vm.h> 43 #include <vm/pmap.h> 44 45 /* syscons bits */ 46 #include <sys/fbio.h> 47 #include <sys/consio.h> 48 49 #include <machine/bus.h> 50 51 #include <dev/fdt/fdt_common.h> 52 #include <dev/ofw/openfirm.h> 53 #include <dev/ofw/ofw_bus.h> 54 #include <dev/ofw/ofw_bus_subr.h> 55 56 #include <dev/fb/fbreg.h> 57 #include <dev/syscons/syscons.h> 58 59 #include <arm/ti/ti_prcm.h> 60 #include <arm/ti/ti_scm.h> 61 62 #include "am335x_lcd.h" 63 #include "am335x_pwm.h" 64 65 #define LCD_PID 0x00 66 #define LCD_CTRL 0x04 67 #define CTRL_DIV_MASK 0xff 68 #define CTRL_DIV_SHIFT 8 69 #define CTRL_AUTO_UFLOW_RESTART (1 << 1) 70 #define CTRL_RASTER_MODE 1 71 #define CTRL_LIDD_MODE 0 72 #define LCD_LIDD_CTRL 0x0C 73 #define LCD_LIDD_CS0_CONF 0x10 74 #define LCD_LIDD_CS0_ADDR 0x14 75 #define LCD_LIDD_CS0_DATA 0x18 76 #define LCD_LIDD_CS1_CONF 0x1C 77 #define LCD_LIDD_CS1_ADDR 0x20 78 #define LCD_LIDD_CS1_DATA 0x24 79 #define LCD_RASTER_CTRL 0x28 80 #define RASTER_CTRL_TFT24_UNPACKED (1 << 26) 81 #define RASTER_CTRL_TFT24 (1 << 25) 82 #define RASTER_CTRL_STN565 (1 << 24) 83 #define RASTER_CTRL_TFTPMAP (1 << 23) 84 #define RASTER_CTRL_NIBMODE (1 << 22) 85 #define RASTER_CTRL_PALMODE_SHIFT 20 86 #define PALETTE_PALETTE_AND_DATA 0x00 87 #define PALETTE_PALETTE_ONLY 0x01 88 #define PALETTE_DATA_ONLY 0x02 89 #define RASTER_CTRL_REQDLY_SHIFT 12 90 #define RASTER_CTRL_MONO8B (1 << 9) 91 #define RASTER_CTRL_RBORDER (1 << 8) 92 #define RASTER_CTRL_LCDTFT (1 << 7) 93 #define RASTER_CTRL_LCDBW (1 << 1) 94 #define RASTER_CTRL_LCDEN (1 << 0) 95 #define LCD_RASTER_TIMING_0 0x2C 96 #define RASTER_TIMING_0_HBP_SHIFT 24 97 #define RASTER_TIMING_0_HFP_SHIFT 16 98 #define RASTER_TIMING_0_HSW_SHIFT 10 99 #define RASTER_TIMING_0_PPLLSB_SHIFT 4 100 #define RASTER_TIMING_0_PPLMSB_SHIFT 3 101 #define LCD_RASTER_TIMING_1 0x30 102 #define RASTER_TIMING_1_VBP_SHIFT 24 103 #define RASTER_TIMING_1_VFP_SHIFT 16 104 #define RASTER_TIMING_1_VSW_SHIFT 10 105 #define RASTER_TIMING_1_LPP_SHIFT 0 106 #define LCD_RASTER_TIMING_2 0x34 107 #define RASTER_TIMING_2_HSWHI_SHIFT 27 108 #define RASTER_TIMING_2_LPP_B10_SHIFT 26 109 #define RASTER_TIMING_2_PHSVS (1 << 25) 110 #define RASTER_TIMING_2_PHSVS_RISE (1 << 24) 111 #define RASTER_TIMING_2_PHSVS_FALL (0 << 24) 112 #define RASTER_TIMING_2_IOE (1 << 23) 113 #define RASTER_TIMING_2_IPC (1 << 22) 114 #define RASTER_TIMING_2_IHS (1 << 21) 115 #define RASTER_TIMING_2_IVS (1 << 20) 116 #define RASTER_TIMING_2_ACBI_SHIFT 16 117 #define RASTER_TIMING_2_ACB_SHIFT 8 118 #define RASTER_TIMING_2_HBPHI_SHIFT 4 119 #define RASTER_TIMING_2_HFPHI_SHIFT 0 120 #define LCD_RASTER_SUBPANEL 0x38 121 #define LCD_RASTER_SUBPANEL2 0x3C 122 #define LCD_LCDDMA_CTRL 0x40 123 #define LCDDMA_CTRL_DMA_MASTER_PRIO_SHIFT 16 124 #define LCDDMA_CTRL_TH_FIFO_RDY_SHIFT 8 125 #define LCDDMA_CTRL_BURST_SIZE_SHIFT 4 126 #define LCDDMA_CTRL_BYTES_SWAP (1 << 3) 127 #define LCDDMA_CTRL_BE (1 << 1) 128 #define LCDDMA_CTRL_FB0_ONLY 0 129 #define LCDDMA_CTRL_FB0_FB1 (1 << 0) 130 #define LCD_LCDDMA_FB0_BASE 0x44 131 #define LCD_LCDDMA_FB0_CEILING 0x48 132 #define LCD_LCDDMA_FB1_BASE 0x4C 133 #define LCD_LCDDMA_FB1_CEILING 0x50 134 #define LCD_SYSCONFIG 0x54 135 #define SYSCONFIG_STANDBY_FORCE (0 << 4) 136 #define SYSCONFIG_STANDBY_NONE (1 << 4) 137 #define SYSCONFIG_STANDBY_SMART (2 << 4) 138 #define SYSCONFIG_IDLE_FORCE (0 << 2) 139 #define SYSCONFIG_IDLE_NONE (1 << 2) 140 #define SYSCONFIG_IDLE_SMART (2 << 2) 141 #define LCD_IRQSTATUS_RAW 0x58 142 #define LCD_IRQSTATUS 0x5C 143 #define LCD_IRQENABLE_SET 0x60 144 #define LCD_IRQENABLE_CLEAR 0x64 145 #define IRQ_EOF1 (1 << 9) 146 #define IRQ_EOF0 (1 << 8) 147 #define IRQ_PL (1 << 6) 148 #define IRQ_FUF (1 << 5) 149 #define IRQ_ACB (1 << 3) 150 #define IRQ_SYNC_LOST (1 << 2) 151 #define IRQ_RASTER_DONE (1 << 1) 152 #define IRQ_FRAME_DONE (1 << 0) 153 #define LCD_CLKC_ENABLE 0x6C 154 #define CLKC_ENABLE_DMA (1 << 2) 155 #define CLKC_ENABLE_LDID (1 << 1) 156 #define CLKC_ENABLE_CORE (1 << 0) 157 #define LCD_CLKC_RESET 0x70 158 #define CLKC_RESET_MAIN (1 << 3) 159 #define CLKC_RESET_DMA (1 << 2) 160 #define CLKC_RESET_LDID (1 << 1) 161 #define CLKC_RESET_CORE (1 << 0) 162 163 #define LCD_LOCK(_sc) mtx_lock(&(_sc)->sc_mtx) 164 #define LCD_UNLOCK(_sc) mtx_unlock(&(_sc)->sc_mtx) 165 #define LCD_LOCK_INIT(_sc) mtx_init(&(_sc)->sc_mtx, \ 166 device_get_nameunit(_sc->sc_dev), "am335x_lcd", MTX_DEF) 167 #define LCD_LOCK_DESTROY(_sc) mtx_destroy(&(_sc)->sc_mtx); 168 169 #define LCD_READ4(_sc, reg) bus_read_4((_sc)->sc_mem_res, reg); 170 #define LCD_WRITE4(_sc, reg, value) \ 171 bus_write_4((_sc)->sc_mem_res, reg, value); 172 173 174 /* Backlight is controlled by eCAS interface on PWM unit 0 */ 175 #define PWM_UNIT 0 176 #define PWM_PERIOD 100 177 178 struct am335x_lcd_softc { 179 device_t sc_dev; 180 struct resource *sc_mem_res; 181 struct resource *sc_irq_res; 182 void *sc_intr_hl; 183 struct mtx sc_mtx; 184 int sc_backlight; 185 struct sysctl_oid *sc_oid; 186 187 /* Framebuffer */ 188 bus_dma_tag_t sc_dma_tag; 189 bus_dmamap_t sc_dma_map; 190 size_t sc_fb_size; 191 bus_addr_t sc_fb_phys; 192 uint8_t *sc_fb_base; 193 }; 194 195 static void 196 am335x_fb_dmamap_cb(void *arg, bus_dma_segment_t *segs, int nseg, int err) 197 { 198 bus_addr_t *addr; 199 200 if (err) 201 return; 202 203 addr = (bus_addr_t*)arg; 204 *addr = segs[0].ds_addr; 205 } 206 207 static uint32_t 208 am335x_lcd_calc_divisor(uint32_t reference, uint32_t freq) 209 { 210 uint32_t div; 211 /* Raster mode case: divisors are in range from 2 to 255 */ 212 for (div = 2; div < 255; div++) 213 if (reference/div <= freq) 214 return (div); 215 216 return (255); 217 } 218 219 static int 220 am335x_lcd_sysctl_backlight(SYSCTL_HANDLER_ARGS) 221 { 222 struct am335x_lcd_softc *sc = (struct am335x_lcd_softc*)arg1; 223 int error; 224 int backlight; 225 226 backlight = sc->sc_backlight;; 227 error = sysctl_handle_int(oidp, &backlight, 0, req); 228 229 if (error != 0 || req->newptr == NULL) 230 return (error); 231 232 if (backlight < 0) 233 backlight = 0; 234 if (backlight > 100) 235 backlight = 100; 236 237 LCD_LOCK(sc); 238 error = am335x_pwm_config_ecas(PWM_UNIT, PWM_PERIOD, 239 backlight*PWM_PERIOD/100); 240 if (error == 0) 241 sc->sc_backlight = backlight; 242 LCD_UNLOCK(sc); 243 244 return (error); 245 } 246 247 static int 248 am335x_read_panel_property(device_t dev, const char *name, uint32_t *val) 249 { 250 phandle_t node; 251 pcell_t cell; 252 253 node = ofw_bus_get_node(dev); 254 if ((OF_getprop(node, name, &cell, sizeof(cell))) <= 0) { 255 device_printf(dev, "missing '%s' attribute in LCD panel info\n", 256 name); 257 return (ENXIO); 258 } 259 260 *val = fdt32_to_cpu(cell); 261 262 return (0); 263 } 264 265 static int 266 am335x_read_panel_info(device_t dev, struct panel_info *panel) 267 { 268 int error; 269 270 error = 0; 271 if ((error = am335x_read_panel_property(dev, 272 "panel_width", &panel->panel_width))) 273 goto out; 274 275 if ((error = am335x_read_panel_property(dev, 276 "panel_height", &panel->panel_height))) 277 goto out; 278 279 if ((error = am335x_read_panel_property(dev, 280 "panel_hfp", &panel->panel_hfp))) 281 goto out; 282 283 if ((error = am335x_read_panel_property(dev, 284 "panel_hbp", &panel->panel_hbp))) 285 goto out; 286 287 if ((error = am335x_read_panel_property(dev, 288 "panel_hsw", &panel->panel_hsw))) 289 goto out; 290 291 if ((error = am335x_read_panel_property(dev, 292 "panel_vfp", &panel->panel_vfp))) 293 goto out; 294 295 if ((error = am335x_read_panel_property(dev, 296 "panel_vbp", &panel->panel_vbp))) 297 goto out; 298 299 if ((error = am335x_read_panel_property(dev, 300 "panel_vsw", &panel->panel_vsw))) 301 goto out; 302 303 if ((error = am335x_read_panel_property(dev, 304 "panel_pxl_clk", &panel->panel_pxl_clk))) 305 goto out; 306 307 if ((error = am335x_read_panel_property(dev, 308 "panel_invert_pxl_clk", &panel->panel_invert_pxl_clk))) 309 goto out; 310 311 if ((error = am335x_read_panel_property(dev, 312 "ac_bias", &panel->ac_bias))) 313 goto out; 314 315 if ((error = am335x_read_panel_property(dev, 316 "ac_bias_intrpt", &panel->ac_bias_intrpt))) 317 goto out; 318 319 if ((error = am335x_read_panel_property(dev, 320 "dma_burst_sz", &panel->dma_burst_sz))) 321 goto out; 322 323 if ((error = am335x_read_panel_property(dev, 324 "bpp", &panel->bpp))) 325 goto out; 326 327 if ((error = am335x_read_panel_property(dev, 328 "fdd", &panel->fdd))) 329 goto out; 330 331 if ((error = am335x_read_panel_property(dev, 332 "invert_line_clock", &panel->invert_line_clock))) 333 goto out; 334 335 if ((error = am335x_read_panel_property(dev, 336 "invert_frm_clock", &panel->invert_frm_clock))) 337 goto out; 338 339 if ((error = am335x_read_panel_property(dev, 340 "sync_edge", &panel->sync_edge))) 341 goto out; 342 343 error = am335x_read_panel_property(dev, 344 "sync_ctrl", &panel->sync_ctrl); 345 346 out: 347 return (error); 348 } 349 350 static void 351 am335x_lcd_intr(void *arg) 352 { 353 struct am335x_lcd_softc *sc = arg; 354 uint32_t reg; 355 356 reg = LCD_READ4(sc, LCD_IRQSTATUS); 357 LCD_WRITE4(sc, LCD_IRQSTATUS, reg); 358 359 if (reg & IRQ_SYNC_LOST) { 360 reg = LCD_READ4(sc, LCD_RASTER_CTRL); 361 reg &= ~RASTER_CTRL_LCDEN; 362 LCD_WRITE4(sc, LCD_RASTER_CTRL, reg); 363 364 reg = LCD_READ4(sc, LCD_RASTER_CTRL); 365 reg |= RASTER_CTRL_LCDEN; 366 LCD_WRITE4(sc, LCD_RASTER_CTRL, reg); 367 return; 368 } 369 370 if (reg & IRQ_PL) { 371 reg = LCD_READ4(sc, LCD_RASTER_CTRL); 372 reg &= ~RASTER_CTRL_LCDEN; 373 LCD_WRITE4(sc, LCD_RASTER_CTRL, reg); 374 375 reg = LCD_READ4(sc, LCD_RASTER_CTRL); 376 reg |= RASTER_CTRL_LCDEN; 377 LCD_WRITE4(sc, LCD_RASTER_CTRL, reg); 378 return; 379 } 380 381 if (reg & IRQ_EOF0) { 382 LCD_WRITE4(sc, LCD_LCDDMA_FB0_BASE, sc->sc_fb_phys); 383 LCD_WRITE4(sc, LCD_LCDDMA_FB0_CEILING, sc->sc_fb_phys + sc->sc_fb_size - 1); 384 reg &= ~IRQ_EOF0; 385 } 386 387 if (reg & IRQ_EOF1) { 388 LCD_WRITE4(sc, LCD_LCDDMA_FB1_BASE, sc->sc_fb_phys); 389 LCD_WRITE4(sc, LCD_LCDDMA_FB1_CEILING, sc->sc_fb_phys + sc->sc_fb_size - 1); 390 reg &= ~IRQ_EOF1; 391 } 392 393 if (reg & IRQ_FUF) { 394 /* TODO: Handle FUF */ 395 } 396 397 if (reg & IRQ_ACB) { 398 /* TODO: Handle ACB */ 399 } 400 } 401 402 static int 403 am335x_lcd_probe(device_t dev) 404 { 405 int err; 406 407 if (!ofw_bus_status_okay(dev)) 408 return (ENXIO); 409 410 if (!ofw_bus_is_compatible(dev, "ti,am335x-lcd")) 411 return (ENXIO); 412 413 device_set_desc(dev, "AM335x LCD controller"); 414 415 err = sc_probe_unit(device_get_unit(dev), 416 device_get_flags(dev) | SC_AUTODETECT_KBD); 417 if (err != 0) 418 return (err); 419 420 return (BUS_PROBE_DEFAULT); 421 } 422 423 static int 424 am335x_lcd_attach(device_t dev) 425 { 426 struct am335x_lcd_softc *sc; 427 int rid; 428 int div; 429 struct panel_info panel; 430 uint32_t reg, timing0, timing1, timing2; 431 struct sysctl_ctx_list *ctx; 432 struct sysctl_oid *tree; 433 uint32_t burst_log; 434 int err; 435 size_t dma_size; 436 437 sc = device_get_softc(dev); 438 sc->sc_dev = dev; 439 440 if (am335x_read_panel_info(dev, &panel)) 441 return (ENXIO); 442 443 int ref_freq = 0; 444 ti_prcm_clk_enable(LCDC_CLK); 445 if (ti_prcm_clk_get_source_freq(LCDC_CLK, &ref_freq)) { 446 device_printf(dev, "Can't get reference frequency\n"); 447 return (ENXIO); 448 } 449 450 rid = 0; 451 sc->sc_mem_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid, 452 RF_ACTIVE); 453 if (!sc->sc_mem_res) { 454 device_printf(dev, "cannot allocate memory window\n"); 455 return (ENXIO); 456 } 457 458 rid = 0; 459 sc->sc_irq_res = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, 460 RF_ACTIVE); 461 if (!sc->sc_irq_res) { 462 bus_release_resource(dev, SYS_RES_MEMORY, 0, sc->sc_mem_res); 463 device_printf(dev, "cannot allocate interrupt\n"); 464 return (ENXIO); 465 } 466 467 if (bus_setup_intr(dev, sc->sc_irq_res, INTR_TYPE_MISC | INTR_MPSAFE, 468 NULL, am335x_lcd_intr, sc, 469 &sc->sc_intr_hl) != 0) { 470 bus_release_resource(dev, SYS_RES_IRQ, rid, 471 sc->sc_irq_res); 472 bus_release_resource(dev, SYS_RES_MEMORY, rid, 473 sc->sc_mem_res); 474 device_printf(dev, "Unable to setup the irq handler.\n"); 475 return (ENXIO); 476 } 477 478 LCD_LOCK_INIT(sc); 479 480 /* Panle initialization */ 481 dma_size = round_page(panel.panel_width*panel.panel_height*panel.bpp/8); 482 483 /* 484 * Now allocate framebuffer memory 485 */ 486 err = bus_dma_tag_create( 487 bus_get_dma_tag(dev), 488 4, 0, /* alignment, boundary */ 489 BUS_SPACE_MAXADDR_32BIT, /* lowaddr */ 490 BUS_SPACE_MAXADDR, /* highaddr */ 491 NULL, NULL, /* filter, filterarg */ 492 dma_size, 1, /* maxsize, nsegments */ 493 dma_size, 0, /* maxsegsize, flags */ 494 NULL, NULL, /* lockfunc, lockarg */ 495 &sc->sc_dma_tag); 496 if (err) 497 goto fail; 498 499 err = bus_dmamem_alloc(sc->sc_dma_tag, (void **)&sc->sc_fb_base, 500 BUS_DMA_COHERENT, &sc->sc_dma_map); 501 502 if (err) { 503 device_printf(dev, "cannot allocate framebuffer\n"); 504 goto fail; 505 } 506 507 err = bus_dmamap_load(sc->sc_dma_tag, sc->sc_dma_map, sc->sc_fb_base, 508 dma_size, am335x_fb_dmamap_cb, &sc->sc_fb_phys, BUS_DMA_NOWAIT); 509 510 if (err) { 511 device_printf(dev, "cannot load DMA map\n"); 512 goto fail; 513 } 514 515 /* Make sure it's blank */ 516 memset(sc->sc_fb_base, 0x00, dma_size); 517 518 /* Calculate actual FB Size */ 519 sc->sc_fb_size = panel.panel_width*panel.panel_height*panel.bpp/8; 520 521 /* Only raster mode is supported */ 522 reg = CTRL_RASTER_MODE; 523 div = am335x_lcd_calc_divisor(ref_freq, panel.panel_pxl_clk); 524 reg |= (div << CTRL_DIV_SHIFT); 525 LCD_WRITE4(sc, LCD_CTRL, reg); 526 527 /* Set timing */ 528 timing0 = timing1 = timing2 = 0; 529 530 /* Horizontal back porch */ 531 timing0 |= (panel.panel_hbp & 0xff) << RASTER_TIMING_0_HBP_SHIFT; 532 timing2 |= ((panel.panel_hbp >> 8) & 3) << RASTER_TIMING_2_HBPHI_SHIFT; 533 /* Horizontal front porch */ 534 timing0 |= (panel.panel_hfp & 0xff) << RASTER_TIMING_0_HFP_SHIFT; 535 timing2 |= ((panel.panel_hfp >> 8) & 3) << RASTER_TIMING_2_HFPHI_SHIFT; 536 /* Horizontal sync width */ 537 timing0 |= (panel.panel_hsw & 0x3f) << RASTER_TIMING_0_HSW_SHIFT; 538 timing2 |= ((panel.panel_hsw >> 6) & 0xf) << RASTER_TIMING_2_HSWHI_SHIFT; 539 540 /* Vertical back porch, front porch, sync width */ 541 timing1 |= (panel.panel_vbp & 0xff) << RASTER_TIMING_1_VBP_SHIFT; 542 timing1 |= (panel.panel_vfp & 0xff) << RASTER_TIMING_1_VFP_SHIFT; 543 timing1 |= (panel.panel_vsw & 0x3f) << RASTER_TIMING_1_VSW_SHIFT; 544 545 /* Pixels per line */ 546 timing0 |= (((panel.panel_width - 1) >> 10) & 1) 547 << RASTER_TIMING_0_PPLMSB_SHIFT; 548 timing0 |= (((panel.panel_width - 1) >> 4) & 0x3f) 549 << RASTER_TIMING_0_PPLLSB_SHIFT; 550 551 /* Lines per panel */ 552 timing1 |= ((panel.panel_height - 1) & 0x3ff) 553 << RASTER_TIMING_1_LPP_SHIFT; 554 timing2 |= (((panel.panel_height - 1) >> 10 ) & 1) 555 << RASTER_TIMING_2_LPP_B10_SHIFT; 556 557 /* clock signal settings */ 558 if (panel.sync_ctrl) 559 timing2 |= RASTER_TIMING_2_PHSVS; 560 if (panel.sync_edge) 561 timing2 |= RASTER_TIMING_2_PHSVS_RISE; 562 else 563 timing2 |= RASTER_TIMING_2_PHSVS_FALL; 564 if (panel.invert_line_clock) 565 timing2 |= RASTER_TIMING_2_IHS; 566 if (panel.invert_frm_clock) 567 timing2 |= RASTER_TIMING_2_IVS; 568 if (panel.panel_invert_pxl_clk) 569 timing2 |= RASTER_TIMING_2_IPC; 570 571 /* AC bias */ 572 timing2 |= (panel.ac_bias << RASTER_TIMING_2_ACB_SHIFT); 573 timing2 |= (panel.ac_bias_intrpt << RASTER_TIMING_2_ACBI_SHIFT); 574 575 LCD_WRITE4(sc, LCD_RASTER_TIMING_0, timing0); 576 LCD_WRITE4(sc, LCD_RASTER_TIMING_1, timing1); 577 LCD_WRITE4(sc, LCD_RASTER_TIMING_2, timing2); 578 579 /* DMA settings */ 580 reg = LCDDMA_CTRL_FB0_FB1; 581 /* Find power of 2 for current burst size */ 582 switch (panel.dma_burst_sz) { 583 case 1: 584 burst_log = 0; 585 break; 586 case 2: 587 burst_log = 1; 588 break; 589 case 4: 590 burst_log = 2; 591 break; 592 case 8: 593 burst_log = 3; 594 break; 595 case 16: 596 default: 597 burst_log = 4; 598 break; 599 } 600 reg |= (burst_log << LCDDMA_CTRL_BURST_SIZE_SHIFT); 601 /* XXX: FIFO TH */ 602 reg |= (0 << LCDDMA_CTRL_TH_FIFO_RDY_SHIFT); 603 LCD_WRITE4(sc, LCD_LCDDMA_CTRL, reg); 604 605 LCD_WRITE4(sc, LCD_LCDDMA_FB0_BASE, sc->sc_fb_phys); 606 LCD_WRITE4(sc, LCD_LCDDMA_FB0_CEILING, sc->sc_fb_phys + sc->sc_fb_size - 1); 607 LCD_WRITE4(sc, LCD_LCDDMA_FB1_BASE, sc->sc_fb_phys); 608 LCD_WRITE4(sc, LCD_LCDDMA_FB1_CEILING, sc->sc_fb_phys + sc->sc_fb_size - 1); 609 610 /* Enable LCD */ 611 reg = RASTER_CTRL_LCDTFT; 612 reg |= (panel.fdd << RASTER_CTRL_REQDLY_SHIFT); 613 reg |= (PALETTE_DATA_ONLY << RASTER_CTRL_PALMODE_SHIFT); 614 if (panel.bpp >= 24) 615 reg |= RASTER_CTRL_TFT24; 616 if (panel.bpp == 32) 617 reg |= RASTER_CTRL_TFT24_UNPACKED; 618 LCD_WRITE4(sc, LCD_RASTER_CTRL, reg); 619 620 LCD_WRITE4(sc, LCD_CLKC_ENABLE, 621 CLKC_ENABLE_DMA | CLKC_ENABLE_LDID | CLKC_ENABLE_CORE); 622 623 LCD_WRITE4(sc, LCD_CLKC_RESET, CLKC_RESET_MAIN); 624 DELAY(100); 625 LCD_WRITE4(sc, LCD_CLKC_RESET, 0); 626 627 reg = IRQ_EOF1 | IRQ_EOF0 | IRQ_FUF | IRQ_PL | 628 IRQ_ACB | IRQ_SYNC_LOST | IRQ_RASTER_DONE | 629 IRQ_FRAME_DONE; 630 LCD_WRITE4(sc, LCD_IRQENABLE_SET, reg); 631 632 reg = LCD_READ4(sc, LCD_RASTER_CTRL); 633 reg |= RASTER_CTRL_LCDEN; 634 LCD_WRITE4(sc, LCD_RASTER_CTRL, reg); 635 636 LCD_WRITE4(sc, LCD_SYSCONFIG, 637 SYSCONFIG_STANDBY_SMART | SYSCONFIG_IDLE_SMART); 638 639 /* Init backlight interface */ 640 ctx = device_get_sysctl_ctx(sc->sc_dev); 641 tree = device_get_sysctl_tree(sc->sc_dev); 642 sc->sc_oid = SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, 643 "backlight", CTLTYPE_INT | CTLFLAG_RW, sc, 0, 644 am335x_lcd_sysctl_backlight, "I", "LCD backlight"); 645 sc->sc_backlight = 0; 646 /* Check if eCAS interface is available at this point */ 647 if (am335x_pwm_config_ecas(PWM_UNIT, 648 PWM_PERIOD, PWM_PERIOD) == 0) 649 sc->sc_backlight = 100; 650 651 err = (sc_attach_unit(device_get_unit(dev), 652 device_get_flags(dev) | SC_AUTODETECT_KBD)); 653 654 if (err) { 655 device_printf(dev, "failed to attach syscons\n"); 656 goto fail; 657 } 658 659 am335x_lcd_syscons_setup((vm_offset_t)sc->sc_fb_base, sc->sc_fb_phys, &panel); 660 661 return (0); 662 663 fail: 664 return (err); 665 } 666 667 static int 668 am335x_lcd_detach(device_t dev) 669 { 670 /* Do not let unload driver */ 671 return (EBUSY); 672 } 673 674 static device_method_t am335x_lcd_methods[] = { 675 DEVMETHOD(device_probe, am335x_lcd_probe), 676 DEVMETHOD(device_attach, am335x_lcd_attach), 677 DEVMETHOD(device_detach, am335x_lcd_detach), 678 679 DEVMETHOD_END 680 }; 681 682 static driver_t am335x_lcd_driver = { 683 "am335x_lcd", 684 am335x_lcd_methods, 685 sizeof(struct am335x_lcd_softc), 686 }; 687 688 static devclass_t am335x_lcd_devclass; 689 690 DRIVER_MODULE(am335x_lcd, simplebus, am335x_lcd_driver, am335x_lcd_devclass, 0, 0); 691 MODULE_VERSION(am335x_lcd, 1); 692 MODULE_DEPEND(am335x_lcd, simplebus, 1, 1, 1); 693