xref: /freebsd/sys/arm/nvidia/tegra124/tegra124_xusbpadctl.c (revision 744bfb213144c63cbaf38d91a1c4f7aebb9b9fbc)
1 /*-
2  * Copyright (c) 2016 Michal Meloun <mmel@FreeBSD.org>
3  * All rights reserved.
4  *
5  * Redistribution and use in source and binary forms, with or without
6  * modification, are permitted provided that the following conditions
7  * are met:
8  * 1. Redistributions of source code must retain the above copyright
9  *    notice, this list of conditions and the following disclaimer.
10  * 2. Redistributions in binary form must reproduce the above copyright
11  *    notice, this list of conditions and the following disclaimer in the
12  *    documentation and/or other materials provided with the distribution.
13  *
14  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
15  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
17  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
18  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
20  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
21  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
22  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
23  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
24  * SUCH DAMAGE.
25  */
26 
27 #include <sys/cdefs.h>
28 __FBSDID("$FreeBSD$");
29 
30 #include <sys/param.h>
31 #include <sys/systm.h>
32 #include <sys/bus.h>
33 #include <sys/kernel.h>
34 #include <sys/module.h>
35 #include <sys/malloc.h>
36 #include <sys/rman.h>
37 
38 #include <machine/bus.h>
39 #include <machine/fdt.h>
40 
41 #include <dev/extres/hwreset/hwreset.h>
42 #include <dev/extres/phy/phy.h>
43 #include <dev/extres/regulator/regulator.h>
44 #include <dev/fdt/fdt_common.h>
45 #include <dev/fdt/fdt_pinctrl.h>
46 #include <dev/ofw/openfirm.h>
47 #include <dev/ofw/ofw_bus.h>
48 #include <dev/ofw/ofw_bus_subr.h>
49 
50 #include <arm/nvidia/tegra_efuse.h>
51 
52 #include <dt-bindings/pinctrl/pinctrl-tegra-xusb.h>
53 
54 #include "phydev_if.h"
55 
56 /* FUSE calibration data. */
57 #define	FUSE_XUSB_CALIB				0x0F0
58 #define	  FUSE_XUSB_CALIB_HS_CURR_LEVEL_123(x)		(((x) >> 15) & 0x3F);
59 #define	  FUSE_XUSB_CALIB_HS_IREF_CAP(x)		(((x) >> 13) & 0x03);
60 #define	  FUSE_XUSB_CALIB_HS_SQUELCH_LEVEL(x)		(((x) >> 11) & 0x03);
61 #define	  FUSE_XUSB_CALIB_HS_TERM_RANGE_ADJ(x)		(((x) >>  7) & 0x0F);
62 #define	  FUSE_XUSB_CALIB_HS_CURR_LEVEL_0(x)		(((x) >>  0) & 0x3F);
63 
64 /* Registers. */
65 #define	XUSB_PADCTL_USB2_PAD_MUX		0x004
66 
67 #define	XUSB_PADCTL_USB2_PORT_CAP		0x008
68 #define	 USB2_PORT_CAP_ULPI_PORT_INTERNAL		(1 << 25)
69 #define	 USB2_PORT_CAP_ULPI_PORT_CAP			(1 << 24)
70 #define	 USB2_PORT_CAP_PORT_REVERSE_ID(p)		(1 << (3 + (p) * 4))
71 #define	 USB2_PORT_CAP_PORT_INTERNAL(p)			(1 << (2 + (p) * 4))
72 #define	 USB2_PORT_CAP_PORT_CAP(p, x)			(((x) & 3) << ((p) * 4))
73 #define	  USB2_PORT_CAP_PORT_CAP_OTG			0x3
74 #define	  USB2_PORT_CAP_PORT_CAP_DEVICE			0x2
75 #define	  USB2_PORT_CAP_PORT_CAP_HOST			0x1
76 #define	  USB2_PORT_CAP_PORT_CAP_DISABLED		0x0
77 
78 #define	XUSB_PADCTL_SS_PORT_MAP			0x014
79 #define	 SS_PORT_MAP_PORT_INTERNAL(p)			(1 << (3 + (p) * 4))
80 #define	 SS_PORT_MAP_PORT_MAP(p, x)			(((x) & 7) << ((p) * 4))
81 
82 #define	XUSB_PADCTL_ELPG_PROGRAM		0x01C
83 #define	 ELPG_PROGRAM_AUX_MUX_LP0_VCORE_DOWN		(1 << 26)
84 #define	 ELPG_PROGRAM_AUX_MUX_LP0_CLAMP_EN_EARLY	(1 << 25)
85 #define	 ELPG_PROGRAM_AUX_MUX_LP0_CLAMP_EN		(1 << 24)
86 #define	 ELPG_PROGRAM_SSP_ELPG_VCORE_DOWN(x) 		(1 << (18 + (x) * 4))
87 #define	 ELPG_PROGRAM_SSP_ELPG_CLAMP_EN_EARLY(x) 	(1 << (17 + (x) * 4))
88 #define	 ELPG_PROGRAM_SSP_ELPG_CLAMP_EN(x)		(1 << (16 + (x) * 4))
89 
90 #define	XUSB_PADCTL_IOPHY_PLL_P0_CTL1		0x040
91 #define	 IOPHY_PLL_P0_CTL1_PLL0_LOCKDET			(1 << 19)
92 #define	 IOPHY_PLL_P0_CTL1_REFCLK_SEL(x)		(((x) & 0xF) << 12)
93 #define	 IOPHY_PLL_P0_CTL1_PLL_RST			(1 << 1)
94 
95 #define	XUSB_PADCTL_IOPHY_PLL_P0_CTL2		0x044
96 #define	 IOPHY_PLL_P0_CTL2_REFCLKBUF_EN			(1 << 6)
97 #define	 IOPHY_PLL_P0_CTL2_TXCLKREF_EN			(1 << 5)
98 #define	 IOPHY_PLL_P0_CTL2_TXCLKREF_SEL			(1 << 4)
99 
100 #define XUSB_PADCTL_IOPHY_USB3_PAD_CTL2(x) 	(0x058 + (x) * 4)
101 #define	 IOPHY_USB3_PAD_CTL2_CDR_CNTL(x)		(((x) & 0x00FF) <<  4)
102 #define	 IOPHY_USB3_PAD_CTL2_RX_EQ(x)			(((x) & 0xFFFF) <<  8)
103 #define	 IOPHY_USB3_PAD_CTL2_RX_WANDER(x)		(((x) & 0x000F) <<  4)
104 #define	 IOPHY_USB3_PAD_CTL2_RX_TERM_CNTL(x)		(((x) & 0x0003) <<  2)
105 #define	 IOPHY_USB3_PAD_CTL2_TX_TERM_CNTL(x)		(((x) & 0x0003) <<  0)
106 
107 #define	XUSB_PADCTL_IOPHY_USB3_PAD_CTL4(x)	(0x068 + (x) * 4)
108 
109 #define	XUSB_PADCTL_USB2_OTG_PAD_CTL0(x) 	(0x0A0 + (x) * 4)
110 #define	 USB2_OTG_PAD_CTL0_LSBIAS_SEL			(1 << 23)
111 #define	 USB2_OTG_PAD_CTL0_DISCON_DETECT_METHOD		(1 << 22)
112 #define	 USB2_OTG_PAD_CTL0_PD_ZI			(1 << 21)
113 #define	 USB2_OTG_PAD_CTL0_PD2				(1 << 20)
114 #define	 USB2_OTG_PAD_CTL0_PD				(1 << 19)
115 #define	 USB2_OTG_PAD_CTL0_TERM_EN			(1 << 18)
116 #define	 USB2_OTG_PAD_CTL0_LS_LS_FSLEW(x)		(((x) & 0x03) << 16)
117 #define	 USB2_OTG_PAD_CTL0_LS_RSLEW(x)			(((x) & 0x03) << 14)
118 #define	 USB2_OTG_PAD_CTL0_FS_SLEW(x)			(((x) & 0x03) << 12)
119 #define	 USB2_OTG_PAD_CTL0_HS_SLEW(x)			(((x) & 0x3F) <<  6)
120 #define	 USB2_OTG_PAD_CTL0_HS_CURR_LEVEL(x)		(((x) & 0x3F) <<  0)
121 
122 #define XUSB_PADCTL_USB2_OTG_PAD_CTL1(x) 	(0x0AC + (x) * 4)
123 #define	 USB2_OTG_PAD_CTL1_RPU_RANGE_ADJ(x)		(((x) & 0x3) << 11)
124 #define	 USB2_OTG_PAD_CTL1_HS_IREF_CAP(x)		(((x) & 0x3) <<  9)
125 #define	 USB2_OTG_PAD_CTL1_SPARE(x)			(((x) & 0x3) <<  7)
126 #define	 USB2_OTG_PAD_CTL1_TERM_RANGE_ADJ(x)		(((x) & 0xF) <<  3)
127 #define	 USB2_OTG_PAD_CTL1_PD_DR			(1 <<  2)
128 #define	 USB2_OTG_PAD_CTL1_PD_DISC_FORCE_POWERUP	(1 <<  1)
129 #define	 USB2_OTG_PAD_CTL1_PD_CHRP_FORCE_POWERUP	(1 <<  0)
130 
131 #define	XUSB_PADCTL_USB2_BIAS_PAD_CTL0		0x0B8
132 #define	 USB2_BIAS_PAD_CTL0_ADJRPU(x)			(((x) & 0x7) << 14)
133 #define	 USB2_BIAS_PAD_CTL0_PD_TRK			(1 << 13)
134 #define	 USB2_BIAS_PAD_CTL0_PD				(1 << 12)
135 #define	 USB2_BIAS_PAD_CTL0_TERM_OFFSETL(x)		(((x) & 0x3) <<  9)
136 #define	 USB2_BIAS_PAD_CTL0_VBUS_LEVEL(x)		(((x) & 0x3) <<  7)
137 #define	 USB2_BIAS_PAD_CTL0_HS_CHIRP_LEVEL(x)		(((x) & 0x3) <<  5)
138 #define	 USB2_BIAS_PAD_CTL0_HS_DISCON_LEVEL(x)		(((x) & 0x7) <<  2)
139 #define	 USB2_BIAS_PAD_CTL0_HS_SQUELCH_LEVEL(x)		(((x) & 0x3) <<  0)
140 
141 #define	XUSB_PADCTL_HSIC_PAD0_CTL0		0x0C8
142 #define	 HSIC_PAD0_CTL0_HSIC_OPT(x)			(((x) & 0xF) << 16)
143 #define	 HSIC_PAD0_CTL0_TX_SLEWN(x)			(((x) & 0xF) << 12)
144 #define	 HSIC_PAD0_CTL0_TX_SLEWP(x)			(((x) & 0xF) <<  8)
145 #define	 HSIC_PAD0_CTL0_TX_RTUNEN(x)			(((x) & 0xF) <<  4)
146 #define	 HSIC_PAD0_CTL0_TX_RTUNEP(x)			(((x) & 0xF) <<  0)
147 
148 #define	XUSB_PADCTL_USB3_PAD_MUX		0x134
149 #define	 USB3_PAD_MUX_PCIE_IDDQ_DISABLE(x) 		(1 << (1 + (x)))
150 #define	 USB3_PAD_MUX_SATA_IDDQ_DISABLE 		(1 << 6)
151 
152 #define	XUSB_PADCTL_IOPHY_PLL_S0_CTL1		0x138
153 #define	 IOPHY_PLL_S0_CTL1_PLL1_LOCKDET			(1 << 27)
154 #define	 IOPHY_PLL_S0_CTL1_PLL1_MODE			(1 << 24)
155 #define	 IOPHY_PLL_S0_CTL1_PLL_PWR_OVRD			(1 << 3)
156 #define	 IOPHY_PLL_S0_CTL1_PLL_RST_L			(1 << 1)
157 #define	 IOPHY_PLL_S0_CTL1_PLL_IDDQ			(1 << 0)
158 
159 #define	XUSB_PADCTL_IOPHY_PLL_S0_CTL2		0x13C
160 #define	XUSB_PADCTL_IOPHY_PLL_S0_CTL3		0x140
161 #define	XUSB_PADCTL_IOPHY_PLL_S0_CTL4		0x144
162 
163 #define	XUSB_PADCTL_IOPHY_MISC_PAD_S0_CTL1	0x148
164 #define	 IOPHY_MISC_PAD_S0_CTL1_IDDQ_OVRD		(1 << 1)
165 #define	 IOPHY_MISC_PAD_S0_CTL1_IDDQ			(1 << 0)
166 
167 #define	XUSB_PADCTL_IOPHY_MISC_PAD_S0_CTL2	0x14C
168 #define	XUSB_PADCTL_IOPHY_MISC_PAD_S0_CTL3	0x150
169 #define	XUSB_PADCTL_IOPHY_MISC_PAD_S0_CTL4	0x154
170 #define	XUSB_PADCTL_IOPHY_MISC_PAD_S0_CTL5	0x158
171 #define	XUSB_PADCTL_IOPHY_MISC_PAD_S0_CTL6	0x15C
172 
173 #define	WR4(_sc, _r, _v)	bus_write_4((_sc)->mem_res, (_r), (_v))
174 #define	RD4(_sc, _r)		bus_read_4((_sc)->mem_res, (_r))
175 
176 struct padctl_softc {
177 	device_t	dev;
178 	struct resource	*mem_res;
179 	hwreset_t	rst;
180 	int		phy_ena_cnt;
181 
182 	/* Fuses calibration data */
183 	uint32_t	hs_curr_level_0;
184 	uint32_t	hs_curr_level_123;
185 	uint32_t	hs_iref_cap;
186 	uint32_t	hs_term_range_adj;
187 	uint32_t	hs_squelch_level;
188 
189 	uint32_t	hs_curr_level_offset;
190 };
191 
192 static struct ofw_compat_data compat_data[] = {
193 	{"nvidia,tegra124-xusb-padctl",	1},
194 	{NULL,				0},
195 };
196 
197 /* Ports. */
198 enum padctl_port_type {
199 	PADCTL_PORT_USB2,
200 	PADCTL_PORT_ULPI,
201 	PADCTL_PORT_HSIC,
202 	PADCTL_PORT_USB3,
203 };
204 
205 struct padctl_lane;
206 struct padctl_port {
207 	enum padctl_port_type	type;
208 	const char		*name;
209 	const char		*base_name;
210 	int			idx;
211 	int			(*init)(struct padctl_softc *sc,
212 				    struct padctl_port *port);
213 
214 	/* Runtime data. */
215 	bool			enabled;
216 	regulator_t		supply_vbus;	/* USB2, USB3 */
217 	bool			internal;	/* ULPI, USB2, USB3 */
218 	uint32_t		companion;	/* USB3 */
219 	struct padctl_lane	*lane;
220 };
221 
222 static int usb3_port_init(struct padctl_softc *sc, struct padctl_port *port);
223 
224 #define	PORT(t, n, p, i) {						\
225 	.type = t,							\
226 	.name = n "-" #p,						\
227 	.base_name = n,							\
228 	.idx = p,							\
229 	.init = i,							\
230 }
231 static struct padctl_port ports_tbl[] = {
232 	PORT(PADCTL_PORT_USB2, "usb2", 0, NULL),
233 	PORT(PADCTL_PORT_USB2, "usb2", 1, NULL),
234 	PORT(PADCTL_PORT_USB2, "usb2", 2, NULL),
235 	PORT(PADCTL_PORT_ULPI, "ulpi", 0, NULL),
236 	PORT(PADCTL_PORT_HSIC, "hsic", 0, NULL),
237 	PORT(PADCTL_PORT_HSIC, "hsic", 1, NULL),
238 	PORT(PADCTL_PORT_USB3, "usb3", 0, usb3_port_init),
239 	PORT(PADCTL_PORT_USB3, "usb3", 1, usb3_port_init),
240 };
241 
242 /* Pads - a group of lannes. */
243 enum padctl_pad_type {
244 	PADCTL_PAD_USB2,
245 	PADCTL_PAD_ULPI,
246 	PADCTL_PAD_HSIC,
247 	PADCTL_PAD_PCIE,
248 	PADCTL_PAD_SATA,
249 };
250 
251 struct padctl_lane;
252 struct padctl_pad {
253 	const char		*name;
254 	enum padctl_pad_type	type;
255 	int			(*powerup)(struct padctl_softc *sc,
256 				    struct padctl_lane *lane);
257 	int			(*powerdown)(struct padctl_softc *sc,
258 				    struct padctl_lane *lane);
259 	/* Runtime data. */
260 	bool			enabled;
261 	struct padctl_lane	*lanes[8]; 	/* Safe maximum value. */
262 	int			nlanes;
263 };
264 
265 static int usb2_powerup(struct padctl_softc *sc, struct padctl_lane *lane);
266 static int usb2_powerdown(struct padctl_softc *sc, struct padctl_lane *lane);
267 static int pcie_powerup(struct padctl_softc *sc, struct padctl_lane *lane);
268 static int pcie_powerdown(struct padctl_softc *sc, struct padctl_lane *lane);
269 static int sata_powerup(struct padctl_softc *sc, struct padctl_lane *lane);
270 static int sata_powerdown(struct padctl_softc *sc, struct padctl_lane *lane);
271 
272 #define	PAD(n, t, u, d) {						\
273 	.name = n,							\
274 	.type = t,							\
275 	.powerup = u,							\
276 	.powerdown = d,							\
277 }
278 static struct padctl_pad pads_tbl[] = {
279 	PAD("usb2", PADCTL_PAD_USB2, usb2_powerup, usb2_powerdown),
280 	PAD("ulpi", PADCTL_PAD_ULPI, NULL, NULL),
281 	PAD("hsic", PADCTL_PAD_HSIC, NULL, NULL),
282 	PAD("pcie", PADCTL_PAD_PCIE, pcie_powerup, pcie_powerdown),
283 	PAD("sata", PADCTL_PAD_SATA, sata_powerup, sata_powerdown),
284 };
285 
286 /* Lanes. */
287 static char *otg_mux[] = {"snps", "xusb", "uart", "rsvd"};
288 static char *usb_mux[] = {"snps", "xusb"};
289 static char *pci_mux[] = {"pcie", "usb3-ss", "sata", "rsvd"};
290 
291 struct padctl_lane {
292 	const char		*name;
293 	int			idx;
294 	bus_size_t		reg;
295 	uint32_t		shift;
296 	uint32_t		mask;
297 	char			**mux;
298 	int			nmux;
299 	/* Runtime data. */
300 	bool			enabled;
301 	struct padctl_pad	*pad;
302 	struct padctl_port	*port;
303 	int			mux_idx;
304 
305 };
306 
307 #define	LANE(n, p, r, s, m, mx) {					\
308 	.name = n "-" #p,						\
309 	.idx = p,							\
310 	.reg = r,							\
311 	.shift = s,							\
312 	.mask = m,							\
313 	.mux = mx,							\
314 	.nmux = nitems(mx),						\
315 }
316 static struct padctl_lane lanes_tbl[] = {
317 	LANE("usb2", 0, XUSB_PADCTL_USB2_PAD_MUX,  0, 0x3, otg_mux),
318 	LANE("usb2", 1, XUSB_PADCTL_USB2_PAD_MUX,  2, 0x3, otg_mux),
319 	LANE("usb2", 2, XUSB_PADCTL_USB2_PAD_MUX,  4, 0x3, otg_mux),
320 	LANE("ulpi", 0, XUSB_PADCTL_USB2_PAD_MUX, 12, 0x1, usb_mux),
321 	LANE("hsic", 0, XUSB_PADCTL_USB2_PAD_MUX, 14, 0x1, usb_mux),
322 	LANE("hsic", 1, XUSB_PADCTL_USB2_PAD_MUX, 15, 0x1, usb_mux),
323 	LANE("pcie", 0, XUSB_PADCTL_USB3_PAD_MUX, 16, 0x3, pci_mux),
324 	LANE("pcie", 1, XUSB_PADCTL_USB3_PAD_MUX, 18, 0x3, pci_mux),
325 	LANE("pcie", 2, XUSB_PADCTL_USB3_PAD_MUX, 20, 0x3, pci_mux),
326 	LANE("pcie", 3, XUSB_PADCTL_USB3_PAD_MUX, 22, 0x3, pci_mux),
327 	LANE("pcie", 4, XUSB_PADCTL_USB3_PAD_MUX, 24, 0x3, pci_mux),
328 	LANE("sata", 0, XUSB_PADCTL_USB3_PAD_MUX, 26, 0x3, pci_mux),
329 };
330 
331 /* Define all possible mappings for USB3 port lanes */
332 struct padctl_lane_map {
333 	int			port_idx;
334 	enum padctl_pad_type	pad_type;
335 	int			lane_idx;
336 };
337 
338 #define	LANE_MAP(pi, pt, li) {						\
339 	.port_idx = pi,							\
340 	.pad_type = pt,							\
341 	.lane_idx = li,							\
342 }
343 static struct padctl_lane_map lane_map_tbl[] = {
344 	LANE_MAP(0, PADCTL_PAD_PCIE, 0), 	/* port USB3-0 -> lane PCIE-0 */
345 	LANE_MAP(1, PADCTL_PAD_PCIE, 1), 	/* port USB3-1 -> lane PCIE-1 */
346 						/* -- or -- */
347 	LANE_MAP(1, PADCTL_PAD_SATA, 0), 	/* port USB3-1 -> lane SATA-0 */
348 };
349 
350  /* Phy class and methods. */
351 static int xusbpadctl_phy_enable(struct phynode *phy, bool enable);
352 static phynode_method_t xusbpadctl_phynode_methods[] = {
353 	PHYNODEMETHOD(phynode_enable,	xusbpadctl_phy_enable),
354 	PHYNODEMETHOD_END
355 
356 };
357 DEFINE_CLASS_1(xusbpadctl_phynode, xusbpadctl_phynode_class,
358     xusbpadctl_phynode_methods, 0, phynode_class);
359 
360 static struct padctl_port *search_lane_port(struct padctl_softc *sc,
361     struct padctl_lane *lane);
362 /* -------------------------------------------------------------------------
363  *
364  *   PHY functions
365  */
366 static int
367 usb3_port_init(struct padctl_softc *sc, struct padctl_port *port)
368 {
369 	uint32_t reg;
370 
371 	reg = RD4(sc, XUSB_PADCTL_SS_PORT_MAP);
372 	if (port->internal)
373 		reg &= ~SS_PORT_MAP_PORT_INTERNAL(port->idx);
374 	else
375 		reg |= SS_PORT_MAP_PORT_INTERNAL(port->idx);
376 	reg &= ~SS_PORT_MAP_PORT_MAP(port->idx, ~0);
377 	reg |= SS_PORT_MAP_PORT_MAP(port->idx, port->companion);
378 	WR4(sc, XUSB_PADCTL_SS_PORT_MAP, reg);
379 
380 	reg = RD4(sc, XUSB_PADCTL_IOPHY_USB3_PAD_CTL2(port->idx));
381 	reg &= ~IOPHY_USB3_PAD_CTL2_CDR_CNTL(~0);
382 	reg &= ~IOPHY_USB3_PAD_CTL2_RX_EQ(~0);
383 	reg &= ~IOPHY_USB3_PAD_CTL2_RX_WANDER(~0);
384 	reg |= IOPHY_USB3_PAD_CTL2_CDR_CNTL(0x24);
385 	reg |= IOPHY_USB3_PAD_CTL2_RX_EQ(0xF070);
386 	reg |= IOPHY_USB3_PAD_CTL2_RX_WANDER(0xF);
387 	WR4(sc, XUSB_PADCTL_IOPHY_USB3_PAD_CTL2(port->idx), reg);
388 
389 	WR4(sc, XUSB_PADCTL_IOPHY_USB3_PAD_CTL4(port->idx),
390 	    0x002008EE);
391 
392 	reg = RD4(sc, XUSB_PADCTL_ELPG_PROGRAM);
393 	reg &= ~ELPG_PROGRAM_SSP_ELPG_VCORE_DOWN(port->idx);
394 	WR4(sc, XUSB_PADCTL_ELPG_PROGRAM, reg);
395 	DELAY(100);
396 
397 	reg = RD4(sc, XUSB_PADCTL_ELPG_PROGRAM);
398 	reg &= ~ELPG_PROGRAM_SSP_ELPG_CLAMP_EN_EARLY(port->idx);
399 	WR4(sc, XUSB_PADCTL_ELPG_PROGRAM, reg);
400 	DELAY(100);
401 
402 	reg = RD4(sc, XUSB_PADCTL_ELPG_PROGRAM);
403 	reg &= ~ELPG_PROGRAM_SSP_ELPG_CLAMP_EN(port->idx);
404 	WR4(sc, XUSB_PADCTL_ELPG_PROGRAM, reg);
405 	DELAY(100);
406 
407 	return (0);
408 }
409 
410 static int
411 pcie_powerup(struct padctl_softc *sc, struct padctl_lane *lane)
412 {
413 	uint32_t reg;
414 	int i;
415 
416 	reg = RD4(sc, XUSB_PADCTL_IOPHY_PLL_P0_CTL1);
417 	reg &= ~IOPHY_PLL_P0_CTL1_REFCLK_SEL(~0);
418 	WR4(sc, XUSB_PADCTL_IOPHY_PLL_P0_CTL1, reg);
419 	DELAY(100);
420 
421 	reg = RD4(sc, XUSB_PADCTL_IOPHY_PLL_P0_CTL2);
422 	reg |= IOPHY_PLL_P0_CTL2_REFCLKBUF_EN;
423 	reg |= IOPHY_PLL_P0_CTL2_TXCLKREF_EN;
424 	reg |= IOPHY_PLL_P0_CTL2_TXCLKREF_SEL;
425 	WR4(sc, XUSB_PADCTL_IOPHY_PLL_P0_CTL2, reg);
426 	DELAY(100);
427 
428 	reg = RD4(sc, XUSB_PADCTL_IOPHY_PLL_P0_CTL1);
429 	reg |= IOPHY_PLL_P0_CTL1_PLL_RST;
430 	WR4(sc, XUSB_PADCTL_IOPHY_PLL_P0_CTL1, reg);
431 	DELAY(100);
432 
433 	for (i = 100; i > 0; i--) {
434 		reg = RD4(sc, XUSB_PADCTL_IOPHY_PLL_P0_CTL1);
435 		if (reg & IOPHY_PLL_P0_CTL1_PLL0_LOCKDET)
436 			break;
437 		DELAY(10);
438 	}
439 	if (i <= 0) {
440 		device_printf(sc->dev, "Failed to power up PCIe phy\n");
441 		return (ETIMEDOUT);
442 	}
443 	reg = RD4(sc, XUSB_PADCTL_USB3_PAD_MUX);
444 	reg |= USB3_PAD_MUX_PCIE_IDDQ_DISABLE(lane->idx);
445 	WR4(sc, XUSB_PADCTL_USB3_PAD_MUX, reg);
446 
447 	return (0);
448 }
449 
450 static int
451 pcie_powerdown(struct padctl_softc *sc, struct padctl_lane *lane)
452 {
453 	uint32_t reg;
454 
455 	reg = RD4(sc, XUSB_PADCTL_USB3_PAD_MUX);
456 	reg &= ~USB3_PAD_MUX_PCIE_IDDQ_DISABLE(lane->idx);
457 	WR4(sc, XUSB_PADCTL_USB3_PAD_MUX, reg);
458 
459 	reg = RD4(sc, XUSB_PADCTL_IOPHY_PLL_P0_CTL1);
460 	reg &= ~IOPHY_PLL_P0_CTL1_PLL_RST;
461 	WR4(sc, XUSB_PADCTL_IOPHY_PLL_P0_CTL1, reg);
462 	DELAY(100);
463 
464 	return (0);
465 
466 }
467 
468 static int
469 sata_powerup(struct padctl_softc *sc, struct padctl_lane *lane)
470 {
471 	uint32_t reg;
472 	int i;
473 
474 	reg = RD4(sc, XUSB_PADCTL_IOPHY_MISC_PAD_S0_CTL1);
475 	reg &= ~IOPHY_MISC_PAD_S0_CTL1_IDDQ_OVRD;
476 	reg &= ~IOPHY_MISC_PAD_S0_CTL1_IDDQ;
477 	WR4(sc, XUSB_PADCTL_IOPHY_MISC_PAD_S0_CTL1, reg);
478 
479 	reg = RD4(sc, XUSB_PADCTL_IOPHY_PLL_S0_CTL1);
480 	reg &= ~IOPHY_PLL_S0_CTL1_PLL_PWR_OVRD;
481 	reg &= ~IOPHY_PLL_S0_CTL1_PLL_IDDQ;
482 	WR4(sc, XUSB_PADCTL_IOPHY_PLL_S0_CTL1, reg);
483 
484 	reg = RD4(sc, XUSB_PADCTL_IOPHY_PLL_S0_CTL1);
485 	reg |= IOPHY_PLL_S0_CTL1_PLL1_MODE;
486 	WR4(sc, XUSB_PADCTL_IOPHY_PLL_S0_CTL1, reg);
487 
488 	reg = RD4(sc, XUSB_PADCTL_IOPHY_PLL_S0_CTL1);
489 	reg |= IOPHY_PLL_S0_CTL1_PLL_RST_L;
490 	WR4(sc, XUSB_PADCTL_IOPHY_PLL_S0_CTL1, reg);
491 
492 	for (i = 100; i >= 0; i--) {
493 		reg = RD4(sc, XUSB_PADCTL_IOPHY_PLL_S0_CTL1);
494 		if (reg & IOPHY_PLL_S0_CTL1_PLL1_LOCKDET)
495 			break;
496 		DELAY(100);
497 	}
498 	if (i <= 0) {
499 		device_printf(sc->dev, "Failed to power up SATA phy\n");
500 		return (ETIMEDOUT);
501 	}
502 	reg = RD4(sc, XUSB_PADCTL_USB3_PAD_MUX);
503 	reg |= IOPHY_PLL_S0_CTL1_PLL_RST_L;
504 	WR4(sc, XUSB_PADCTL_USB3_PAD_MUX, reg);
505 
506 	reg = RD4(sc, XUSB_PADCTL_USB3_PAD_MUX);
507 	reg |= USB3_PAD_MUX_SATA_IDDQ_DISABLE;
508 	WR4(sc, XUSB_PADCTL_USB3_PAD_MUX, reg);
509 
510 	return (0);
511 }
512 
513 static int
514 sata_powerdown(struct padctl_softc *sc, struct padctl_lane *lane)
515 {
516 	uint32_t reg;
517 
518 	reg = RD4(sc, XUSB_PADCTL_USB3_PAD_MUX);
519 	reg &= ~USB3_PAD_MUX_SATA_IDDQ_DISABLE;
520 	WR4(sc, XUSB_PADCTL_USB3_PAD_MUX, reg);
521 
522 	reg = RD4(sc, XUSB_PADCTL_IOPHY_PLL_S0_CTL1);
523 	reg &= ~IOPHY_PLL_S0_CTL1_PLL_RST_L;
524 	WR4(sc, XUSB_PADCTL_IOPHY_PLL_S0_CTL1, reg);
525 	DELAY(100);
526 
527 	reg = RD4(sc, XUSB_PADCTL_IOPHY_PLL_S0_CTL1);
528 	reg &= ~IOPHY_PLL_S0_CTL1_PLL1_MODE;
529 	WR4(sc, XUSB_PADCTL_IOPHY_PLL_S0_CTL1, reg);
530 	DELAY(100);
531 
532 	reg = RD4(sc, XUSB_PADCTL_IOPHY_PLL_S0_CTL1);
533 	reg |= IOPHY_PLL_S0_CTL1_PLL_PWR_OVRD;
534 	reg |= IOPHY_PLL_S0_CTL1_PLL_IDDQ;
535 	WR4(sc, XUSB_PADCTL_IOPHY_PLL_S0_CTL1, reg);
536 	DELAY(100);
537 
538 	reg = RD4(sc, XUSB_PADCTL_IOPHY_MISC_PAD_S0_CTL1);
539 	reg |= IOPHY_MISC_PAD_S0_CTL1_IDDQ_OVRD;
540 	reg |= IOPHY_MISC_PAD_S0_CTL1_IDDQ;
541 	WR4(sc, XUSB_PADCTL_IOPHY_MISC_PAD_S0_CTL1, reg);
542 	DELAY(100);
543 
544 	return (0);
545 }
546 
547 static int
548 usb2_powerup(struct padctl_softc *sc, struct padctl_lane *lane)
549 {
550 	uint32_t reg;
551 	struct padctl_port *port;
552 	int rv;
553 
554 	port = search_lane_port(sc, lane);
555 	if (port == NULL) {
556 		device_printf(sc->dev, "Cannot find port for lane: %s\n",
557 		    lane->name);
558 	}
559 	reg = RD4(sc, XUSB_PADCTL_USB2_BIAS_PAD_CTL0);
560 	reg &= ~USB2_BIAS_PAD_CTL0_HS_SQUELCH_LEVEL(~0);
561 	reg &= ~USB2_BIAS_PAD_CTL0_HS_DISCON_LEVEL(~0);
562 	reg |= USB2_BIAS_PAD_CTL0_HS_SQUELCH_LEVEL(sc->hs_squelch_level);
563 	reg |= USB2_BIAS_PAD_CTL0_HS_DISCON_LEVEL(5);
564 	WR4(sc, XUSB_PADCTL_USB2_BIAS_PAD_CTL0, reg);
565 
566 	reg = RD4(sc, XUSB_PADCTL_USB2_PORT_CAP);
567 	reg &= ~USB2_PORT_CAP_PORT_CAP(lane->idx, ~0);
568 	reg |= USB2_PORT_CAP_PORT_CAP(lane->idx, USB2_PORT_CAP_PORT_CAP_HOST);
569 	WR4(sc, XUSB_PADCTL_USB2_PORT_CAP, reg);
570 
571 	reg = RD4(sc, XUSB_PADCTL_USB2_OTG_PAD_CTL0(lane->idx));
572 	reg &= ~USB2_OTG_PAD_CTL0_HS_CURR_LEVEL(~0);
573 	reg &= ~USB2_OTG_PAD_CTL0_HS_SLEW(~0);
574 	reg &= ~USB2_OTG_PAD_CTL0_LS_RSLEW(~0);
575 	reg &= ~USB2_OTG_PAD_CTL0_PD;
576 	reg &= ~USB2_OTG_PAD_CTL0_PD2;
577 	reg &= ~USB2_OTG_PAD_CTL0_PD_ZI;
578 
579 	reg |= USB2_OTG_PAD_CTL0_HS_SLEW(14);
580 	if (lane->idx == 0) {
581 		reg |= USB2_OTG_PAD_CTL0_HS_CURR_LEVEL(sc->hs_curr_level_0);
582 		reg |= USB2_OTG_PAD_CTL0_LS_RSLEW(3);
583 	} else {
584 		reg |= USB2_OTG_PAD_CTL0_HS_CURR_LEVEL(sc->hs_curr_level_123);
585 		reg |= USB2_OTG_PAD_CTL0_LS_RSLEW(0);
586 	}
587 	WR4(sc, XUSB_PADCTL_USB2_OTG_PAD_CTL0(lane->idx), reg);
588 
589 	reg = RD4(sc, XUSB_PADCTL_USB2_OTG_PAD_CTL1(lane->idx));
590 	reg &= ~USB2_OTG_PAD_CTL1_TERM_RANGE_ADJ(~0);
591 	reg &= ~USB2_OTG_PAD_CTL1_HS_IREF_CAP(~0);
592 	reg &= ~USB2_OTG_PAD_CTL1_PD_DR;
593 	reg &= ~USB2_OTG_PAD_CTL1_PD_DISC_FORCE_POWERUP;
594 	reg &= ~USB2_OTG_PAD_CTL1_PD_CHRP_FORCE_POWERUP;
595 
596 	reg |= USB2_OTG_PAD_CTL1_TERM_RANGE_ADJ(sc->hs_term_range_adj);
597 	reg |= USB2_OTG_PAD_CTL1_HS_IREF_CAP(sc->hs_iref_cap);
598 	WR4(sc, XUSB_PADCTL_USB2_OTG_PAD_CTL1(lane->idx), reg);
599 
600 	if (port != NULL && port->supply_vbus != NULL) {
601 		rv = regulator_enable(port->supply_vbus);
602 		if (rv != 0) {
603 			device_printf(sc->dev,
604 			    "Cannot enable vbus regulator\n");
605 			return (rv);
606 		}
607 	}
608 	reg = RD4(sc, XUSB_PADCTL_USB2_BIAS_PAD_CTL0);
609 	reg &= ~USB2_BIAS_PAD_CTL0_PD;
610 	WR4(sc, XUSB_PADCTL_USB2_BIAS_PAD_CTL0, reg);
611 
612 	return (0);
613 }
614 
615 static int
616 usb2_powerdown(struct padctl_softc *sc, struct padctl_lane *lane)
617 {
618 	uint32_t reg;
619 	struct padctl_port *port;
620 	int rv;
621 
622 	port = search_lane_port(sc, lane);
623 	if (port == NULL) {
624 		device_printf(sc->dev, "Cannot find port for lane: %s\n",
625 		    lane->name);
626 	}
627 	reg = RD4(sc, XUSB_PADCTL_USB2_BIAS_PAD_CTL0);
628 	reg |= USB2_BIAS_PAD_CTL0_PD;
629 	WR4(sc, XUSB_PADCTL_USB2_BIAS_PAD_CTL0, reg);
630 
631 	if (port != NULL && port->supply_vbus != NULL) {
632 		rv = regulator_enable(port->supply_vbus);
633 		if (rv != 0) {
634 			device_printf(sc->dev,
635 			    "Cannot disable vbus regulator\n");
636 			return (rv);
637 		}
638 	}
639 	return (0);
640 }
641 
642 static int
643 phy_powerup(struct padctl_softc *sc)
644 {
645 	uint32_t reg;
646 
647 	reg = RD4(sc, XUSB_PADCTL_ELPG_PROGRAM);
648 	reg &= ~ELPG_PROGRAM_AUX_MUX_LP0_VCORE_DOWN;
649 	WR4(sc, XUSB_PADCTL_ELPG_PROGRAM, reg);
650 	DELAY(100);
651 
652 	reg = RD4(sc, XUSB_PADCTL_ELPG_PROGRAM);
653 	reg &= ~ELPG_PROGRAM_AUX_MUX_LP0_CLAMP_EN;
654 	WR4(sc, XUSB_PADCTL_ELPG_PROGRAM, reg);
655 	DELAY(100);
656 
657 	reg = RD4(sc, XUSB_PADCTL_ELPG_PROGRAM);
658 	reg &= ~ELPG_PROGRAM_AUX_MUX_LP0_CLAMP_EN_EARLY;
659 	WR4(sc, XUSB_PADCTL_ELPG_PROGRAM, reg);
660 	DELAY(100);
661 
662 	return (0);
663 }
664 
665 static int
666 phy_powerdown(struct padctl_softc *sc)
667 {
668 	uint32_t reg;
669 
670 	reg = RD4(sc, XUSB_PADCTL_ELPG_PROGRAM);
671 	reg |= ELPG_PROGRAM_AUX_MUX_LP0_CLAMP_EN_EARLY;
672 	WR4(sc, XUSB_PADCTL_ELPG_PROGRAM, reg);
673 	DELAY(100);
674 
675 	reg = RD4(sc, XUSB_PADCTL_ELPG_PROGRAM);
676 	reg |= ELPG_PROGRAM_AUX_MUX_LP0_CLAMP_EN;
677 	WR4(sc, XUSB_PADCTL_ELPG_PROGRAM, reg);
678 	DELAY(100);
679 
680 	reg = RD4(sc, XUSB_PADCTL_ELPG_PROGRAM);
681 	reg |= ELPG_PROGRAM_AUX_MUX_LP0_VCORE_DOWN;
682 	WR4(sc, XUSB_PADCTL_ELPG_PROGRAM, reg);
683 	DELAY(100);
684 
685 	return (0);
686 }
687 
688 static int
689 xusbpadctl_phy_enable(struct phynode *phy, bool enable)
690 {
691 	device_t dev;
692 	intptr_t id;
693 	struct padctl_softc *sc;
694 	struct padctl_lane *lane;
695 	struct padctl_pad *pad;
696 	int rv;
697 
698 	dev = phynode_get_device(phy);
699 	id = phynode_get_id(phy);
700 	sc = device_get_softc(dev);
701 
702 	if (id < 0 || id >= nitems(lanes_tbl)) {
703 		device_printf(dev, "Unknown phy: %d\n", id);
704 		return (ENXIO);
705 	}
706 	lane = lanes_tbl + id;
707 	if (!lane->enabled) {
708 		device_printf(dev, "Lane is not enabled/configured: %s\n",
709 		    lane->name);
710 		return (ENXIO);
711 	}
712 	pad = lane->pad;
713 	if (enable) {
714 		if (sc->phy_ena_cnt == 0) {
715 			rv = phy_powerup(sc);
716 			if (rv != 0)
717 				return (rv);
718 		}
719 		sc->phy_ena_cnt++;
720 	}
721 
722 	if (enable)
723 		rv = pad->powerup(sc, lane);
724 	else
725 		rv = pad->powerdown(sc, lane);
726 	if (rv != 0)
727 		return (rv);
728 
729 	if (!enable) {
730 		 if (sc->phy_ena_cnt == 1) {
731 			rv = phy_powerdown(sc);
732 			if (rv != 0)
733 				return (rv);
734 		}
735 		sc->phy_ena_cnt--;
736 	}
737 
738 	return (0);
739 }
740 
741 /* -------------------------------------------------------------------------
742  *
743  *   FDT processing
744  */
745 static struct padctl_port *
746 search_port(struct padctl_softc *sc, char *port_name)
747 {
748 	int i;
749 
750 	for (i = 0; i < nitems(ports_tbl); i++) {
751 		if (strcmp(port_name, ports_tbl[i].name) == 0)
752 			return (&ports_tbl[i]);
753 	}
754 	return (NULL);
755 }
756 
757 static struct padctl_port *
758 search_lane_port(struct padctl_softc *sc, struct padctl_lane *lane)
759 {
760 	int i;
761 
762 	for (i = 0; i < nitems(ports_tbl); i++) {
763 		if (!ports_tbl[i].enabled)
764 			continue;
765 		if (ports_tbl[i].lane == lane)
766 			return (ports_tbl + i);
767 	}
768 	return (NULL);
769 }
770 
771 static struct padctl_lane *
772 search_lane(struct padctl_softc *sc, char *lane_name)
773 {
774 	int i;
775 
776 	for (i = 0; i < nitems(lanes_tbl); i++) {
777 		if (strcmp(lane_name, lanes_tbl[i].name) == 0)
778 			return 	(lanes_tbl + i);
779 	}
780 	return (NULL);
781 }
782 
783 static struct padctl_lane *
784 search_pad_lane(struct padctl_softc *sc, enum padctl_pad_type type, int idx)
785 {
786 	int i;
787 
788 	for (i = 0; i < nitems(lanes_tbl); i++) {
789 		if (!lanes_tbl[i].enabled)
790 			continue;
791 		if (type == lanes_tbl[i].pad->type && idx == lanes_tbl[i].idx)
792 			return 	(lanes_tbl + i);
793 	}
794 	return (NULL);
795 }
796 
797 static struct padctl_lane *
798 search_usb3_pad_lane(struct padctl_softc *sc, int idx)
799 {
800 	int i;
801 	struct padctl_lane *lane, *tmp;
802 
803 	lane = NULL;
804 	for (i = 0; i < nitems(lane_map_tbl); i++) {
805 		if (idx != lane_map_tbl[i].port_idx)
806 			continue;
807 		tmp = search_pad_lane(sc, lane_map_tbl[i].pad_type,
808 		    lane_map_tbl[i].lane_idx);
809 		if (tmp == NULL)
810 			continue;
811 		if (strcmp(tmp->mux[tmp->mux_idx], "usb3-ss") != 0)
812 			continue;
813 		if (lane != NULL) {
814 			device_printf(sc->dev, "Duplicated mappings found for"
815 			 " lanes: %s and %s\n", lane->name, tmp->name);
816 			return (NULL);
817 		}
818 		lane = tmp;
819 	}
820 	return (lane);
821 }
822 
823 static struct padctl_pad *
824 search_pad(struct padctl_softc *sc, char *pad_name)
825 {
826 	int i;
827 
828 	for (i = 0; i < nitems(pads_tbl); i++) {
829 		if (strcmp(pad_name, pads_tbl[i].name) == 0)
830 			return 	(pads_tbl + i);
831 	}
832 	return (NULL);
833 }
834 
835 static int
836 search_mux(struct padctl_softc *sc, struct padctl_lane *lane, char *fnc_name)
837 {
838 	int i;
839 
840 	for (i = 0; i < lane->nmux; i++) {
841 		if (strcmp(fnc_name, lane->mux[i]) == 0)
842 			return 	(i);
843 	}
844 	return (-1);
845 }
846 
847 static int
848 config_lane(struct padctl_softc *sc, struct padctl_lane *lane)
849 {
850 	uint32_t reg;
851 
852 	reg = RD4(sc, lane->reg);
853 	reg &= ~(lane->mask << lane->shift);
854 	reg |=  (lane->mux_idx & lane->mask) << lane->shift;
855 	WR4(sc, lane->reg, reg);
856 	return (0);
857 }
858 
859 static int
860 process_lane(struct padctl_softc *sc, phandle_t node, struct padctl_pad *pad)
861 {
862 	struct padctl_lane *lane;
863 	struct phynode *phynode;
864 	struct phynode_init_def phy_init;
865 	char *name;
866 	char *function;
867 	int rv;
868 
869 	name = NULL;
870 	function = NULL;
871 	rv = OF_getprop_alloc(node, "name", (void **)&name);
872 	if (rv <= 0) {
873 		device_printf(sc->dev, "Cannot read lane name.\n");
874 		return (ENXIO);
875 	}
876 
877 	lane = search_lane(sc, name);
878 	if (lane == NULL) {
879 		device_printf(sc->dev, "Unknown lane: %s\n", name);
880 		rv = ENXIO;
881 		goto end;
882 	}
883 
884 	/* Read function (mux) settings. */
885 	rv = OF_getprop_alloc(node, "nvidia,function", (void **)&function);
886 	if (rv <= 0) {
887 		device_printf(sc->dev, "Cannot read lane function.\n");
888 		rv = ENXIO;
889 		goto end;
890 	}
891 
892 	lane->mux_idx = search_mux(sc, lane, function);
893 	if (lane->mux_idx == ~0) {
894 		device_printf(sc->dev, "Unknown function %s for lane %s\n",
895 		    function, name);
896 		rv = ENXIO;
897 		goto end;
898 	}
899 
900 	rv = config_lane(sc, lane);
901 	if (rv != 0) {
902 		device_printf(sc->dev, "Cannot configure lane: %s: %d\n",
903 		    name, rv);
904 		rv = ENXIO;
905 		goto end;
906 	}
907 	lane->pad = pad;
908 	lane->enabled = true;
909 	pad->lanes[pad->nlanes++] = lane;
910 
911 	/* Create and register phy. */
912 	bzero(&phy_init, sizeof(phy_init));
913 	phy_init.id = lane - lanes_tbl;
914 	phy_init.ofw_node = node;
915 	phynode = phynode_create(sc->dev, &xusbpadctl_phynode_class, &phy_init);
916 	if (phynode == NULL) {
917 		device_printf(sc->dev, "Cannot create phy\n");
918 		rv = ENXIO;
919 		goto end;
920 	}
921 	if (phynode_register(phynode) == NULL) {
922 		device_printf(sc->dev, "Cannot create phy\n");
923 		return (ENXIO);
924 	}
925 
926 	rv = 0;
927 
928 end:
929 	if (name != NULL)
930 		OF_prop_free(name);
931 	if (function != NULL)
932 		OF_prop_free(function);
933 	return (rv);
934 }
935 
936 static int
937 process_pad(struct padctl_softc *sc, phandle_t node)
938 {
939 	struct padctl_pad *pad;
940 	char *name;
941 	int rv;
942 
943 	name = NULL;
944 	rv = OF_getprop_alloc(node, "name", (void **)&name);
945 	if (rv <= 0) {
946 		device_printf(sc->dev, "Cannot read pad name.\n");
947 		return (ENXIO);
948 	}
949 	pad = search_pad(sc, name);
950 	if (pad == NULL) {
951 		device_printf(sc->dev, "Unknown pad: %s\n", name);
952 		rv = ENXIO;
953 		goto end;
954 	}
955 
956 	/* Read and process associated lanes. */
957 	node = ofw_bus_find_child(node, "lanes");
958 	if (node <= 0) {
959 		device_printf(sc->dev, "Cannot find regulators subnode\n");
960 		rv = ENXIO;
961 		goto end;
962 	}
963 
964 	for (node = OF_child(node); node != 0; node = OF_peer(node)) {
965 		if (!ofw_bus_node_status_okay(node))
966 			continue;
967 
968 		rv = process_lane(sc, node, pad);
969 		if (rv != 0)
970 			goto end;
971 	}
972 	pad->enabled = true;
973 	rv = 0;
974 end:
975 	if (name != NULL)
976 		OF_prop_free(name);
977 	return (rv);
978 }
979 
980 static int
981 process_port(struct padctl_softc *sc, phandle_t node)
982 {
983 
984 	struct padctl_port *port;
985 	char *name;
986 	int rv;
987 
988 	name = NULL;
989 	rv = OF_getprop_alloc(node, "name", (void **)&name);
990 	if (rv <= 0) {
991 		device_printf(sc->dev, "Cannot read port name.\n");
992 		return (ENXIO);
993 	}
994 
995 	port = search_port(sc, name);
996 	if (port == NULL) {
997 		device_printf(sc->dev, "Unknown port: %s\n", name);
998 		rv = ENXIO;
999 		goto end;
1000 	}
1001 
1002 	if (port->type == PADCTL_PORT_USB3) {
1003 		rv = OF_getencprop(node,  "nvidia,usb2-companion",
1004 		   &(port->companion), sizeof(port->companion));
1005 		if (rv <= 0) {
1006 			device_printf(sc->dev,
1007 			    "Missing 'nvidia,usb2-companion' property "
1008 			    "for port: %s\n", name);
1009 			rv = ENXIO;
1010 			goto end;
1011 		}
1012 	}
1013 
1014 	if (OF_hasprop(node, "vbus-supply")) {
1015 		rv = regulator_get_by_ofw_property(sc->dev, 0,
1016 		    "vbus-supply", &port->supply_vbus);
1017 		if (rv <= 0) {
1018 			device_printf(sc->dev,
1019 			    "Cannot get 'vbus-supply' regulator "
1020 			    "for port: %s\n", name);
1021 			rv = ENXIO;
1022 			goto end;
1023 		}
1024 	}
1025 
1026 	if (OF_hasprop(node, "nvidia,internal"))
1027 		port->internal = true;
1028 	/* Find assigned lane */
1029 	if (port->lane == NULL) {
1030 		switch(port->type) {
1031 		/* Routing is fixed for USB2, ULPI AND HSIC. */
1032 		case PADCTL_PORT_USB2:
1033 			port->lane = search_pad_lane(sc, PADCTL_PAD_USB2,
1034 			    port->idx);
1035 			break;
1036 		case PADCTL_PORT_ULPI:
1037 			port->lane = search_pad_lane(sc, PADCTL_PAD_ULPI,
1038 			    port->idx);
1039 			break;
1040 		case PADCTL_PORT_HSIC:
1041 			port->lane = search_pad_lane(sc, PADCTL_PAD_HSIC,
1042 			    port->idx);
1043 			break;
1044 		case PADCTL_PORT_USB3:
1045 			port->lane = search_usb3_pad_lane(sc, port->idx);
1046 			break;
1047 		}
1048 	}
1049 	if (port->lane == NULL) {
1050 		device_printf(sc->dev, "Cannot find lane for port: %s\n", name);
1051 		rv = ENXIO;
1052 		goto end;
1053 	}
1054 	port->enabled = true;
1055 	rv = 0;
1056 end:
1057 	if (name != NULL)
1058 		OF_prop_free(name);
1059 	return (rv);
1060 }
1061 
1062 static int
1063 parse_fdt(struct padctl_softc *sc, phandle_t base_node)
1064 {
1065 	phandle_t node;
1066 	int rv;
1067 
1068 	rv = 0;
1069 	node = ofw_bus_find_child(base_node, "pads");
1070 
1071 	if (node <= 0) {
1072 		device_printf(sc->dev, "Cannot find pads subnode.\n");
1073 		return (ENXIO);
1074 	}
1075 	for (node = OF_child(node); node != 0; node = OF_peer(node)) {
1076 		if (!ofw_bus_node_status_okay(node))
1077 			continue;
1078 		rv = process_pad(sc, node);
1079 		if (rv != 0)
1080 			return (rv);
1081 	}
1082 
1083 	node = ofw_bus_find_child(base_node, "ports");
1084 	if (node <= 0) {
1085 		device_printf(sc->dev, "Cannot find ports subnode.\n");
1086 		return (ENXIO);
1087 	}
1088 	for (node = OF_child(node); node != 0; node = OF_peer(node)) {
1089 		if (!ofw_bus_node_status_okay(node))
1090 			continue;
1091 		rv = process_port(sc, node);
1092 		if (rv != 0)
1093 			return (rv);
1094 	}
1095 
1096 	return (0);
1097 }
1098 
1099 static void
1100 load_calibration(struct padctl_softc *sc)
1101 {
1102 	uint32_t reg;
1103 
1104 	/* All XUSB pad calibrations are packed into single dword.*/
1105 	reg = tegra_fuse_read_4(FUSE_XUSB_CALIB);
1106 	sc->hs_curr_level_0 = FUSE_XUSB_CALIB_HS_CURR_LEVEL_0(reg);
1107 	sc->hs_curr_level_123 = FUSE_XUSB_CALIB_HS_CURR_LEVEL_123(reg);
1108 	sc->hs_iref_cap = FUSE_XUSB_CALIB_HS_IREF_CAP(reg);
1109 	sc->hs_squelch_level = FUSE_XUSB_CALIB_HS_SQUELCH_LEVEL(reg);
1110 	sc->hs_term_range_adj = FUSE_XUSB_CALIB_HS_TERM_RANGE_ADJ(reg);
1111 }
1112 
1113 /* -------------------------------------------------------------------------
1114  *
1115  *   BUS functions
1116  */
1117 static int
1118 xusbpadctl_probe(device_t dev)
1119 {
1120 
1121 	if (!ofw_bus_status_okay(dev))
1122 		return (ENXIO);
1123 
1124 	if (!ofw_bus_search_compatible(dev, compat_data)->ocd_data)
1125 		return (ENXIO);
1126 
1127 	device_set_desc(dev, "Tegra XUSB phy");
1128 	return (BUS_PROBE_DEFAULT);
1129 }
1130 
1131 static int
1132 xusbpadctl_detach(device_t dev)
1133 {
1134 
1135 	/* This device is always present. */
1136 	return (EBUSY);
1137 }
1138 
1139 static int
1140 xusbpadctl_attach(device_t dev)
1141 {
1142 	struct padctl_softc * sc;
1143 	int i, rid, rv;
1144 	struct padctl_port *port;
1145 	phandle_t node;
1146 
1147 	sc = device_get_softc(dev);
1148 	sc->dev = dev;
1149 	node = ofw_bus_get_node(dev);
1150 
1151 	rid = 0;
1152 	sc->mem_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid,
1153 	    RF_ACTIVE);
1154 	if (sc->mem_res == NULL) {
1155 		device_printf(dev, "Cannot allocate memory resources\n");
1156 		return (ENXIO);
1157 	}
1158 
1159 	rv = hwreset_get_by_ofw_name(dev, 0, "padctl", &sc->rst);
1160 	if (rv != 0) {
1161 		device_printf(dev, "Cannot get 'padctl' reset: %d\n", rv);
1162 		return (rv);
1163 	}
1164 	rv = hwreset_deassert(sc->rst);
1165 	if (rv != 0) {
1166 		device_printf(dev, "Cannot unreset 'padctl' reset: %d\n", rv);
1167 		return (rv);
1168 	}
1169 
1170 	load_calibration(sc);
1171 
1172 	rv = parse_fdt(sc, node);
1173 	if (rv != 0) {
1174 		device_printf(dev, "Cannot parse fdt configuration: %d\n", rv);
1175 		return (rv);
1176 	}
1177 	for (i = 0; i < nitems(ports_tbl); i++) {
1178 		port = ports_tbl + i;
1179 		if (!port->enabled)
1180 			continue;
1181 		if (port->init == NULL)
1182 			continue;
1183 		rv = port->init(sc, port);
1184 		if (rv != 0) {
1185 			device_printf(dev, "Cannot init port '%s'\n",
1186 			    port->name);
1187 			return (rv);
1188 		}
1189 	}
1190 	return (0);
1191 }
1192 
1193 static device_method_t tegra_xusbpadctl_methods[] = {
1194 	/* Device interface */
1195 	DEVMETHOD(device_probe,         xusbpadctl_probe),
1196 	DEVMETHOD(device_attach,        xusbpadctl_attach),
1197 	DEVMETHOD(device_detach,        xusbpadctl_detach),
1198 
1199 	DEVMETHOD_END
1200 };
1201 
1202 static DEFINE_CLASS_0(xusbpadctl, tegra_xusbpadctl_driver,
1203     tegra_xusbpadctl_methods, sizeof(struct padctl_softc));
1204 EARLY_DRIVER_MODULE(tegra_xusbpadctl, simplebus, tegra_xusbpadctl_driver,
1205     NULL, NULL, 73);
1206