1 /*- 2 * Copyright (c) 2013 Ruslan Bukin <br@bsdpad.com> 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 15 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 16 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 17 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 18 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 19 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 20 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 21 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 22 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 23 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 24 * SUCH DAMAGE. 25 */ 26 27 /* 28 * Vybrid Family Universal Serial Bus (USB) Controller 29 * Chapter 44-45, Vybrid Reference Manual, Rev. 5, 07/2013 30 */ 31 32 #include <sys/cdefs.h> 33 __FBSDID("$FreeBSD$"); 34 35 #include "opt_bus.h" 36 37 #include <sys/param.h> 38 #include <sys/systm.h> 39 #include <sys/kernel.h> 40 #include <sys/module.h> 41 #include <sys/bus.h> 42 #include <sys/condvar.h> 43 #include <sys/rman.h> 44 #include <sys/gpio.h> 45 46 #include <dev/ofw/ofw_bus.h> 47 #include <dev/ofw/ofw_bus_subr.h> 48 49 #include <dev/usb/usb.h> 50 #include <dev/usb/usbdi.h> 51 #include <dev/usb/usb_busdma.h> 52 #include <dev/usb/usb_process.h> 53 #include <dev/usb/usb_controller.h> 54 #include <dev/usb/usb_bus.h> 55 #include <dev/usb/controller/ehci.h> 56 #include <dev/usb/controller/ehcireg.h> 57 58 #include <dev/fdt/fdt_common.h> 59 60 #include <machine/bus.h> 61 #include <machine/resource.h> 62 63 #include "gpio_if.h" 64 #include "opt_platform.h" 65 66 #define ENUTMILEVEL3 (1 << 15) 67 #define ENUTMILEVEL2 (1 << 14) 68 69 #define GPIO_USB_PWR 134 70 71 #define USB_ID 0x000 /* Identification register */ 72 #define USB_HWGENERAL 0x004 /* Hardware General */ 73 #define USB_HWHOST 0x008 /* Host Hardware Parameters */ 74 #define USB_HWDEVICE 0x00C /* Device Hardware Parameters */ 75 #define USB_HWTXBUF 0x010 /* TX Buffer Hardware Parameters */ 76 #define USB_HWRXBUF 0x014 /* RX Buffer Hardware Parameters */ 77 #define USB_HCSPARAMS 0x104 /* Host Controller Structural Parameters */ 78 79 #define USBPHY_PWD 0x00 /* PHY Power-Down Register */ 80 #define USBPHY_PWD_SET 0x04 /* PHY Power-Down Register */ 81 #define USBPHY_PWD_CLR 0x08 /* PHY Power-Down Register */ 82 #define USBPHY_PWD_TOG 0x0C /* PHY Power-Down Register */ 83 #define USBPHY_TX 0x10 /* PHY Transmitter Control Register */ 84 #define USBPHY_RX 0x20 /* PHY Receiver Control Register */ 85 #define USBPHY_RX_SET 0x24 /* PHY Receiver Control Register */ 86 #define USBPHY_RX_CLR 0x28 /* PHY Receiver Control Register */ 87 #define USBPHY_RX_TOG 0x2C /* PHY Receiver Control Register */ 88 #define USBPHY_CTRL 0x30 /* PHY General Control Register */ 89 #define USBPHY_CTRL_SET 0x34 /* PHY General Control Register */ 90 #define USBPHY_CTRL_CLR 0x38 /* PHY General Control Register */ 91 #define USBPHY_CTRL_TOG 0x3C /* PHY General Control Register */ 92 #define USBPHY_STATUS 0x40 /* PHY Status Register */ 93 #define USBPHY_DEBUG 0x50 /* PHY Debug Register */ 94 #define USBPHY_DEBUG_SET 0x54 /* PHY Debug Register */ 95 #define USBPHY_DEBUG_CLR 0x58 /* PHY Debug Register */ 96 #define USBPHY_DEBUG_TOG 0x5C /* PHY Debug Register */ 97 #define USBPHY_DEBUG0_STATUS 0x60 /* UTMI Debug Status Register 0 */ 98 #define USBPHY_DEBUG1 0x70 /* UTMI Debug Status Register 1 */ 99 #define USBPHY_DEBUG1_SET 0x74 /* UTMI Debug Status Register 1 */ 100 #define USBPHY_DEBUG1_CLR 0x78 /* UTMI Debug Status Register 1 */ 101 #define USBPHY_DEBUG1_TOG 0x7C /* UTMI Debug Status Register 1 */ 102 #define USBPHY_VERSION 0x80 /* UTMI RTL Version */ 103 #define USBPHY_IP 0x90 /* PHY IP Block Register */ 104 #define USBPHY_IP_SET 0x94 /* PHY IP Block Register */ 105 #define USBPHY_IP_CLR 0x98 /* PHY IP Block Register */ 106 #define USBPHY_IP_TOG 0x9C /* PHY IP Block Register */ 107 108 #define USBPHY_CTRL_SFTRST (1U << 31) 109 #define USBPHY_CTRL_CLKGATE (1 << 30) 110 #define USBPHY_DEBUG_CLKGATE (1 << 30) 111 112 #define PHY_READ4(_sc, _reg) \ 113 bus_space_read_4(_sc->bst_phy, _sc->bsh_phy, _reg) 114 #define PHY_WRITE4(_sc, _reg, _val) \ 115 bus_space_write_4(_sc->bst_phy, _sc->bsh_phy, _reg, _val) 116 117 #define USBC_READ4(_sc, _reg) \ 118 bus_space_read_4(_sc->bst_usbc, _sc->bsh_usbc, _reg) 119 #define USBC_WRITE4(_sc, _reg, _val) \ 120 bus_space_write_4(_sc->bst_usbc, _sc->bsh_usbc, _reg, _val) 121 122 /* Forward declarations */ 123 static int vybrid_ehci_attach(device_t dev); 124 static int vybrid_ehci_detach(device_t dev); 125 static int vybrid_ehci_probe(device_t dev); 126 127 struct vybrid_ehci_softc { 128 ehci_softc_t base; 129 device_t dev; 130 struct resource *res[6]; 131 bus_space_tag_t bst_phy; 132 bus_space_handle_t bsh_phy; 133 bus_space_tag_t bst_usbc; 134 bus_space_handle_t bsh_usbc; 135 }; 136 137 static struct resource_spec vybrid_ehci_spec[] = { 138 { SYS_RES_MEMORY, 0, RF_ACTIVE }, 139 { SYS_RES_MEMORY, 1, RF_ACTIVE }, 140 { SYS_RES_MEMORY, 2, RF_ACTIVE }, 141 { SYS_RES_IRQ, 0, RF_ACTIVE }, 142 { -1, 0 } 143 }; 144 145 static device_method_t ehci_methods[] = { 146 /* Device interface */ 147 DEVMETHOD(device_probe, vybrid_ehci_probe), 148 DEVMETHOD(device_attach, vybrid_ehci_attach), 149 DEVMETHOD(device_detach, vybrid_ehci_detach), 150 DEVMETHOD(device_suspend, bus_generic_suspend), 151 DEVMETHOD(device_resume, bus_generic_resume), 152 DEVMETHOD(device_shutdown, bus_generic_shutdown), 153 154 /* Bus interface */ 155 DEVMETHOD(bus_print_child, bus_generic_print_child), 156 157 { 0, 0 } 158 }; 159 160 /* kobj_class definition */ 161 static driver_t ehci_driver = { 162 "ehci", 163 ehci_methods, 164 sizeof(ehci_softc_t) 165 }; 166 167 static devclass_t ehci_devclass; 168 169 DRIVER_MODULE(ehci, simplebus, ehci_driver, ehci_devclass, 0, 0); 170 MODULE_DEPEND(ehci, usb, 1, 1, 1); 171 172 /* 173 * Public methods 174 */ 175 static int 176 vybrid_ehci_probe(device_t dev) 177 { 178 179 if (!ofw_bus_status_okay(dev)) 180 return (ENXIO); 181 182 if (ofw_bus_is_compatible(dev, "fsl,mvf600-usb-ehci") == 0) 183 return (ENXIO); 184 185 device_set_desc(dev, "Vybrid Family integrated USB controller"); 186 return (BUS_PROBE_DEFAULT); 187 } 188 189 static int 190 phy_init(struct vybrid_ehci_softc *esc) 191 { 192 device_t sc_gpio_dev; 193 int reg; 194 195 /* Reset phy */ 196 reg = PHY_READ4(esc, USBPHY_CTRL); 197 reg |= (USBPHY_CTRL_SFTRST); 198 PHY_WRITE4(esc, USBPHY_CTRL, reg); 199 200 /* Minimum reset time */ 201 DELAY(10000); 202 203 reg &= ~(USBPHY_CTRL_SFTRST | USBPHY_CTRL_CLKGATE); 204 PHY_WRITE4(esc, USBPHY_CTRL, reg); 205 206 reg = (ENUTMILEVEL2 | ENUTMILEVEL3); 207 PHY_WRITE4(esc, USBPHY_CTRL_SET, reg); 208 209 /* Get the GPIO device, we need this to give power to USB */ 210 sc_gpio_dev = devclass_get_device(devclass_find("gpio"), 0); 211 if (sc_gpio_dev == NULL) { 212 device_printf(esc->dev, "Error: failed to get the GPIO dev\n"); 213 return (1); 214 } 215 216 /* Give power to USB */ 217 GPIO_PIN_SETFLAGS(sc_gpio_dev, GPIO_USB_PWR, GPIO_PIN_OUTPUT); 218 GPIO_PIN_SET(sc_gpio_dev, GPIO_USB_PWR, GPIO_PIN_HIGH); 219 220 /* Power up PHY */ 221 PHY_WRITE4(esc, USBPHY_PWD, 0x00); 222 223 /* Ungate clocks */ 224 reg = PHY_READ4(esc, USBPHY_DEBUG); 225 reg &= ~(USBPHY_DEBUG_CLKGATE); 226 PHY_WRITE4(esc, USBPHY_DEBUG, reg); 227 228 #if 0 229 printf("USBPHY_CTRL == 0x%08x\n", 230 PHY_READ4(esc, USBPHY_CTRL)); 231 printf("USBPHY_IP == 0x%08x\n", 232 PHY_READ4(esc, USBPHY_IP)); 233 printf("USBPHY_STATUS == 0x%08x\n", 234 PHY_READ4(esc, USBPHY_STATUS)); 235 printf("USBPHY_DEBUG == 0x%08x\n", 236 PHY_READ4(esc, USBPHY_DEBUG)); 237 printf("USBPHY_DEBUG0_STATUS == 0x%08x\n", 238 PHY_READ4(esc, USBPHY_DEBUG0_STATUS)); 239 printf("USBPHY_DEBUG1 == 0x%08x\n", 240 PHY_READ4(esc, USBPHY_DEBUG1)); 241 #endif 242 243 return (0); 244 } 245 246 static int 247 vybrid_ehci_attach(device_t dev) 248 { 249 struct vybrid_ehci_softc *esc; 250 ehci_softc_t *sc; 251 bus_space_handle_t bsh; 252 int err; 253 int reg; 254 255 esc = device_get_softc(dev); 256 esc->dev = dev; 257 258 sc = &esc->base; 259 sc->sc_bus.parent = dev; 260 sc->sc_bus.devices = sc->sc_devices; 261 sc->sc_bus.devices_max = EHCI_MAX_DEVICES; 262 sc->sc_bus.dma_bits = 32; 263 264 if (bus_alloc_resources(dev, vybrid_ehci_spec, esc->res)) { 265 device_printf(dev, "could not allocate resources\n"); 266 return (ENXIO); 267 } 268 269 /* EHCI registers */ 270 sc->sc_io_tag = rman_get_bustag(esc->res[0]); 271 bsh = rman_get_bushandle(esc->res[0]); 272 sc->sc_io_size = rman_get_size(esc->res[0]); 273 274 esc->bst_usbc = rman_get_bustag(esc->res[1]); 275 esc->bsh_usbc = rman_get_bushandle(esc->res[1]); 276 277 esc->bst_phy = rman_get_bustag(esc->res[2]); 278 esc->bsh_phy = rman_get_bushandle(esc->res[2]); 279 280 /* get all DMA memory */ 281 if (usb_bus_mem_alloc_all(&sc->sc_bus, USB_GET_DMA_TAG(dev), 282 &ehci_iterate_hw_softc)) 283 return (ENXIO); 284 285 #if 0 286 printf("USBx_HCSPARAMS is 0x%08x\n", 287 bus_space_read_4(sc->sc_io_tag, bsh, USB_HCSPARAMS)); 288 printf("USB_ID == 0x%08x\n", 289 bus_space_read_4(sc->sc_io_tag, bsh, USB_ID)); 290 printf("USB_HWGENERAL == 0x%08x\n", 291 bus_space_read_4(sc->sc_io_tag, bsh, USB_HWGENERAL)); 292 printf("USB_HWHOST == 0x%08x\n", 293 bus_space_read_4(sc->sc_io_tag, bsh, USB_HWHOST)); 294 printf("USB_HWDEVICE == 0x%08x\n", 295 bus_space_read_4(sc->sc_io_tag, bsh, USB_HWDEVICE)); 296 printf("USB_HWTXBUF == 0x%08x\n", 297 bus_space_read_4(sc->sc_io_tag, bsh, USB_HWTXBUF)); 298 printf("USB_HWRXBUF == 0x%08x\n", 299 bus_space_read_4(sc->sc_io_tag, bsh, USB_HWRXBUF)); 300 #endif 301 302 if (phy_init(esc)) { 303 device_printf(dev, "Could not setup PHY\n"); 304 return (1); 305 } 306 307 /* 308 * Set handle to USB related registers subregion used by 309 * generic EHCI driver. 310 */ 311 err = bus_space_subregion(sc->sc_io_tag, bsh, 0x100, 312 sc->sc_io_size, &sc->sc_io_hdl); 313 if (err != 0) 314 return (ENXIO); 315 316 /* Setup interrupt handler */ 317 err = bus_setup_intr(dev, esc->res[3], INTR_TYPE_BIO | INTR_MPSAFE, 318 NULL, (driver_intr_t *)ehci_interrupt, sc, 319 &sc->sc_intr_hdl); 320 if (err) { 321 device_printf(dev, "Could not setup irq, " 322 "%d\n", err); 323 return (1); 324 } 325 326 /* Add USB device */ 327 sc->sc_bus.bdev = device_add_child(dev, "usbus", -1); 328 if (!sc->sc_bus.bdev) { 329 device_printf(dev, "Could not add USB device\n"); 330 err = bus_teardown_intr(dev, esc->res[5], 331 sc->sc_intr_hdl); 332 if (err) 333 device_printf(dev, "Could not tear down irq," 334 " %d\n", err); 335 return (1); 336 } 337 device_set_ivars(sc->sc_bus.bdev, &sc->sc_bus); 338 339 strlcpy(sc->sc_vendor, "Freescale", sizeof(sc->sc_vendor)); 340 341 /* Set host mode */ 342 reg = bus_space_read_4(sc->sc_io_tag, sc->sc_io_hdl, 0xA8); 343 reg |= 0x3; 344 bus_space_write_4(sc->sc_io_tag, sc->sc_io_hdl, 0xA8, reg); 345 346 /* Set flags */ 347 sc->sc_flags |= EHCI_SCFLG_SETMODE | EHCI_SCFLG_NORESTERM; 348 349 err = ehci_init(sc); 350 if (!err) { 351 sc->sc_flags |= EHCI_SCFLG_DONEINIT; 352 err = device_probe_and_attach(sc->sc_bus.bdev); 353 } else { 354 device_printf(dev, "USB init failed err=%d\n", err); 355 356 device_delete_child(dev, sc->sc_bus.bdev); 357 sc->sc_bus.bdev = NULL; 358 359 err = bus_teardown_intr(dev, esc->res[5], 360 sc->sc_intr_hdl); 361 if (err) 362 device_printf(dev, "Could not tear down irq," 363 " %d\n", err); 364 return (1); 365 } 366 return (0); 367 } 368 369 static int 370 vybrid_ehci_detach(device_t dev) 371 { 372 struct vybrid_ehci_softc *esc; 373 ehci_softc_t *sc; 374 int err; 375 376 esc = device_get_softc(dev); 377 sc = &esc->base; 378 379 if (sc->sc_flags & EHCI_SCFLG_DONEINIT) 380 return (0); 381 382 /* 383 * only call ehci_detach() after ehci_init() 384 */ 385 if (sc->sc_flags & EHCI_SCFLG_DONEINIT) { 386 ehci_detach(sc); 387 sc->sc_flags &= ~EHCI_SCFLG_DONEINIT; 388 } 389 390 /* 391 * Disable interrupts that might have been switched on in 392 * ehci_init. 393 */ 394 if (sc->sc_io_tag && sc->sc_io_hdl) 395 bus_space_write_4(sc->sc_io_tag, sc->sc_io_hdl, 396 EHCI_USBINTR, 0); 397 398 if (esc->res[5] && sc->sc_intr_hdl) { 399 err = bus_teardown_intr(dev, esc->res[5], 400 sc->sc_intr_hdl); 401 if (err) { 402 device_printf(dev, "Could not tear down irq," 403 " %d\n", err); 404 return (err); 405 } 406 sc->sc_intr_hdl = NULL; 407 } 408 409 if (sc->sc_bus.bdev) { 410 device_delete_child(dev, sc->sc_bus.bdev); 411 sc->sc_bus.bdev = NULL; 412 } 413 414 /* During module unload there are lots of children leftover */ 415 device_delete_children(dev); 416 417 bus_release_resources(dev, vybrid_ehci_spec, esc->res); 418 419 return (0); 420 } 421