xref: /freebsd/sys/arm/freescale/imx/imx_spi.c (revision 6be3386466ab79a84b48429ae66244f21526d3df) 
1 /*-
2  * SPDX-License-Identifier: BSD-2-Clause-FreeBSD
3  *
4  * Copyright (c) 2018 Ian Lepore <ian@freebsd.org>
5  * All rights reserved.
6  *
7  * Redistribution and use in source and binary forms, with or without
8  * modification, are permitted provided that the following conditions
9  * are met:
10  * 1. Redistributions of source code must retain the above copyright
11  *    notice, this list of conditions and the following disclaimer.
12  * 2. Redistributions in binary form must reproduce the above copyright
13  *    notice, this list of conditions and the following disclaimer in the
14  *    documentation and/or other materials provided with the distribution.
15  *
16  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
17  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
18  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
19  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
20  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
21  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
22  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
23  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
24  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
25  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
26  * SUCH DAMAGE.
27  */
28 
29 #include <sys/cdefs.h>
30 __FBSDID("$FreeBSD$");
31 
32 /*
33  * Driver for imx Enhanced Configurable SPI; master-mode only.
34  */
35 
36 #include <sys/param.h>
37 #include <sys/systm.h>
38 #include <sys/bus.h>
39 #include <sys/gpio.h>
40 #include <sys/kernel.h>
41 #include <sys/lock.h>
42 #include <sys/module.h>
43 #include <sys/mutex.h>
44 #include <sys/rman.h>
45 #include <sys/sysctl.h>
46 #include <machine/bus.h>
47 #include <machine/cpu.h>
48 #include <machine/intr.h>
49 
50 #include <arm/freescale/imx/imx_ccmvar.h>
51 
52 #include <dev/gpio/gpiobusvar.h>
53 #include <dev/ofw/ofw_bus.h>
54 #include <dev/ofw/ofw_bus_subr.h>
55 #include <dev/ofw/openfirm.h>
56 #include <dev/spibus/spi.h>
57 #include <dev/spibus/spibusvar.h>
58 
59 #include "spibus_if.h"
60 
61 #define	ECSPI_RXDATA            0x00
62 #define	ECSPI_TXDATA            0x04
63 #define	ECSPI_CTLREG            0x08
64 #define	  CTLREG_BLEN_SHIFT	  20
65 #define	  CTLREG_BLEN_MASK	  0x0fff
66 #define	  CTLREG_CSEL_SHIFT	  18
67 #define	  CTLREG_CSEL_MASK	  0x03
68 #define	  CTLREG_DRCTL_SHIFT	  16
69 #define	  CTLREG_DRCTL_MASK	  0x03
70 #define	  CTLREG_PREDIV_SHIFT	  12
71 #define	  CTLREG_PREDIV_MASK	  0x0f
72 #define	  CTLREG_POSTDIV_SHIFT	  8
73 #define	  CTLREG_POSTDIV_MASK	  0x0f
74 #define	  CTLREG_CMODE_SHIFT	  4
75 #define	  CTLREG_CMODE_MASK	  0x0f
76 #define	  CTLREG_CMODES_MASTER	  (CTLREG_CMODE_MASK << CTLREG_CMODE_SHIFT)
77 #define	  CTLREG_SMC		  (1u << 3)
78 #define	  CTLREG_XCH		  (1u << 2)
79 #define	  CTLREG_HT		  (1u << 1)
80 #define	  CTLREG_EN		  (1u << 0)
81 #define	ECSPI_CFGREG		0x0c
82 #define	  CFGREG_HTLEN_SHIFT	  24
83 #define	  CFGREG_SCLKCTL_SHIFT	  20
84 #define	  CFGREG_DATACTL_SHIFT	  16
85 #define	  CFGREG_SSPOL_SHIFT	  12
86 #define	  CFGREG_SSCTL_SHIFT	   8
87 #define	  CFGREG_SCLKPOL_SHIFT	   4
88 #define	  CFGREG_SCLKPHA_SHIFT	   0
89 #define	  CFGREG_MASK		   0x0f /* all CFGREG fields are 4 bits */
90 #define	ECSPI_INTREG            0x10
91 #define	  INTREG_TCEN		  (1u << 7)
92 #define	  INTREG_ROEN		  (1u << 6)
93 #define	  INTREG_RFEN		  (1u << 5)
94 #define	  INTREG_RDREN		  (1u << 4)
95 #define	  INTREG_RREN		  (1u << 3)
96 #define	  INTREG_TFEN		  (1u << 2)
97 #define	  INTREG_TDREN		  (1u << 1)
98 #define	  INTREG_TEEN		  (1u << 0)
99 #define	ECSPI_DMAREG            0x14
100 #define	  DMA_RX_THRESH_SHIFT	  16
101 #define	  DMA_RX_THRESH_MASK	  0x3f
102 #define	  DMA_TX_THRESH_SHIFT	  0
103 #define	  DMA_TX_THRESH_MASK	  0x3f
104 #define	ECSPI_STATREG           0x18
105 #define	  SREG_TC		  (1u << 7)
106 #define	  SREG_RO		  (1u << 6)
107 #define	  SREG_RF		  (1u << 5)
108 #define	  SREG_RDR		  (1u << 4)
109 #define	  SREG_RR		  (1u << 3)
110 #define	  SREG_TF		  (1u << 2)
111 #define	  SREG_TDR		  (1u << 1)
112 #define	  SREG_TE		  (1u << 0)
113 #define	ECSPI_PERIODREG         0x1c
114 #define	ECSPI_TESTREG           0x20
115 
116 #define	CS_MAX		4	/* Max number of chip selects. */
117 #define	CS_MASK		0x03	/* Mask flag bits out of chipsel. */
118 
119 #define	FIFO_SIZE	64
120 #define	FIFO_RXTHRESH	32
121 #define	FIFO_TXTHRESH	32
122 
123 struct spi_softc {
124 	device_t 		dev;
125 	device_t		spibus;
126 	struct mtx		mtx;
127 	struct resource		*memres;
128 	struct resource		*intres;
129 	void			*inthandle;
130 	gpio_pin_t		cspins[CS_MAX];
131 	u_int			debug;
132 	u_int			basefreq;
133 	uint32_t		ctlreg;
134 	uint32_t		intreg;
135 	uint32_t		fifocnt;
136 	uint8_t			*rxbuf;
137 	uint32_t		rxidx;
138 	uint32_t		rxlen;
139 	uint8_t			*txbuf;
140 	uint32_t		txidx;
141 	uint32_t		txlen;
142 };
143 
144 static struct ofw_compat_data compat_data[] = {
145 	{"fsl,imx51-ecspi",  true},
146 	{"fsl,imx53-ecspi",  true},
147 	{"fsl,imx6dl-ecspi", true},
148 	{"fsl,imx6q-ecspi",  true},
149 	{"fsl,imx6sx-ecspi", true},
150 	{"fsl,imx6ul-ecspi", true},
151 	{NULL,               false}
152 };
153 
154 static inline uint32_t
155 RD4(struct spi_softc *sc, bus_size_t offset)
156 {
157 
158 	return (bus_read_4(sc->memres, offset));
159 }
160 
161 static inline void
162 WR4(struct spi_softc *sc, bus_size_t offset, uint32_t value)
163 {
164 
165 	bus_write_4(sc->memres, offset, value);
166 }
167 
168 static u_int
169 spi_calc_clockdiv(struct spi_softc *sc, u_int busfreq)
170 {
171 	u_int post, pre;
172 
173 	/* Returning 0 effectively sets both dividers to 1. */
174 	if (sc->basefreq <= busfreq)
175 		return (0);
176 
177 	/*
178 	 * Brute-force this; all real-world bus speeds are going to be found on
179 	 * the 1st or 2nd time through this loop.
180 	 */
181 	for (post = 0; post < 16; ++post) {
182 		pre = ((sc->basefreq >> post) / busfreq) - 1;
183 		if (pre < 16)
184 			break;
185 	}
186 	if (post == 16) {
187 		/* The lowest we can go is ~115 Hz. */
188 		pre = 15;
189 		post = 15;
190 	}
191 
192 	if (sc->debug >= 2) {
193 		device_printf(sc->dev,
194 		    "base %u bus %u; pre %u, post %u; actual busfreq %u\n",
195 		    sc->basefreq, busfreq, pre, post,
196 		    (sc->basefreq / (pre + 1)) / (1 << post));
197 	}
198 
199 	return (pre << CTLREG_PREDIV_SHIFT) | (post << CTLREG_POSTDIV_SHIFT);
200 }
201 
202 static void
203 spi_set_chipsel(struct spi_softc *sc, u_int cs, bool active)
204 {
205 	bool pinactive;
206 
207 	/*
208 	 * This is kinda crazy... the gpio pins for chipsel are defined as
209 	 * active-high in the dts, but are supposed to be treated as active-low
210 	 * by this driver.  So to turn on chipsel we have to invert the value
211 	 * passed to gpio_pin_set_active().  Then, to make it more fun, any
212 	 * slave can say its chipsel is active-high, so if that option is
213 	 * on, we have to invert the value again.
214 	 */
215 	pinactive = !active ^ (bool)(cs & SPIBUS_CS_HIGH);
216 
217 	if (sc->debug >= 2) {
218 		device_printf(sc->dev, "chipsel %u changed to %u\n",
219 		    (cs & ~SPIBUS_CS_HIGH), pinactive);
220 	}
221 
222 	/*
223 	 * Change the pin, then do a dummy read of its current state to ensure
224 	 * that the state change reaches the hardware before proceeding.
225 	 */
226 	gpio_pin_set_active(sc->cspins[cs & ~SPIBUS_CS_HIGH], pinactive);
227 	gpio_pin_is_active(sc->cspins[cs & ~SPIBUS_CS_HIGH], &pinactive);
228 }
229 
230 static void
231 spi_hw_setup(struct spi_softc *sc, u_int cs, u_int mode, u_int freq)
232 {
233 	uint32_t reg;
234 
235 	/*
236 	 * Set up control register, and write it first to bring the device out
237 	 * of reset.
238 	 */
239 	sc->ctlreg  = CTLREG_EN | CTLREG_CMODES_MASTER | CTLREG_SMC;
240 	sc->ctlreg |= spi_calc_clockdiv(sc, freq);
241 	sc->ctlreg |= 7 << CTLREG_BLEN_SHIFT; /* XXX byte at a time */
242 	WR4(sc, ECSPI_CTLREG, sc->ctlreg);
243 
244 	/*
245 	 * Set up the config register.  Note that we do all transfers with the
246 	 * SPI hardware's chip-select set to zero.  The actual chip select is
247 	 * handled with a gpio pin.
248 	 */
249 	reg = 0;
250 	if (cs & SPIBUS_CS_HIGH)
251 		reg |= 1u << CFGREG_SSPOL_SHIFT;
252 	if (mode & SPIBUS_MODE_CPHA)
253 		reg |= 1u << CFGREG_SCLKPHA_SHIFT;
254 	if (mode & SPIBUS_MODE_CPOL) {
255 		reg |= 1u << CFGREG_SCLKPOL_SHIFT;
256 		reg |= 1u << CFGREG_SCLKCTL_SHIFT;
257 	}
258 	WR4(sc, ECSPI_CFGREG, reg);
259 
260 	/*
261 	 * Set up the rx/tx FIFO interrupt thresholds.
262 	 */
263 	reg  = (FIFO_RXTHRESH << DMA_RX_THRESH_SHIFT);
264 	reg |= (FIFO_TXTHRESH << DMA_TX_THRESH_SHIFT);
265 	WR4(sc, ECSPI_DMAREG, reg);
266 
267 	/*
268 	 * Do a dummy read, to make sure the preceding writes reach the spi
269 	 * hardware before we assert any gpio chip select.
270 	 */
271 	(void)RD4(sc, ECSPI_CFGREG);
272 }
273 
274 static void
275 spi_empty_rxfifo(struct spi_softc *sc)
276 {
277 
278 	while (sc->rxidx < sc->rxlen && (RD4(sc, ECSPI_STATREG) & SREG_RR)) {
279 		sc->rxbuf[sc->rxidx++] = (uint8_t)RD4(sc, ECSPI_RXDATA);
280 		--sc->fifocnt;
281 	}
282 }
283 
284 static void
285 spi_fill_txfifo(struct spi_softc *sc)
286 {
287 
288 	while (sc->txidx < sc->txlen && sc->fifocnt < FIFO_SIZE) {
289 		WR4(sc, ECSPI_TXDATA, sc->txbuf[sc->txidx++]);
290 		++sc->fifocnt;
291 	}
292 
293 	/*
294 	 * If we're out of data, disable tx data ready (threshold) interrupts,
295 	 * and enable tx fifo empty interrupts.
296 	 */
297 	if (sc->txidx == sc->txlen)
298 		sc->intreg = (sc->intreg & ~INTREG_TDREN) | INTREG_TEEN;
299 }
300 
301 static void
302 spi_intr(void *arg)
303 {
304 	struct spi_softc *sc = arg;
305 	uint32_t intreg, status;
306 
307 	mtx_lock(&sc->mtx);
308 
309 	sc = arg;
310 	intreg = sc->intreg;
311 	status = RD4(sc, ECSPI_STATREG);
312 	WR4(sc, ECSPI_STATREG, status); /* Clear w1c bits. */
313 
314 	/*
315 	 * If we get an overflow error, just signal that the transfer is done
316 	 * and wakeup the waiting thread, which will see that txidx != txlen and
317 	 * return an IO error to the caller.
318 	 */
319 	if (__predict_false(status & SREG_RO)) {
320 		if (sc->debug || bootverbose) {
321 			device_printf(sc->dev, "rxoverflow rxidx %u txidx %u\n",
322 			    sc->rxidx, sc->txidx);
323 		}
324 		sc->intreg = 0;
325 		wakeup(sc);
326 		mtx_unlock(&sc->mtx);
327 		return;
328 	}
329 
330 	if (status & SREG_RR)
331 		spi_empty_rxfifo(sc);
332 
333 	if (status & SREG_TDR)
334 		spi_fill_txfifo(sc);
335 
336 	/*
337 	 * If we're out of bytes to send...
338 	 *  - If Transfer Complete is set (shift register is empty) and we've
339 	 *    received everything we expect, we're all done.
340 	 *  - Else if Tx Fifo Empty is set, we need to stop waiting for that and
341 	 *    switch to waiting for Transfer Complete (wait for shift register
342 	 *    to empty out), and also for Receive Ready (last of incoming data).
343 	 */
344 	if (sc->txidx == sc->txlen) {
345 		if ((status & SREG_TC) && sc->fifocnt == 0) {
346 			sc->intreg = 0;
347 			wakeup(sc);
348 		} else if (status & SREG_TE) {
349 			sc->intreg &= ~(sc->intreg & ~INTREG_TEEN);
350 			sc->intreg |= INTREG_TCEN | INTREG_RREN;
351 		}
352 	}
353 
354 	/*
355 	 * If interrupt flags changed, write the new flags to the hardware and
356 	 * do a dummy readback to ensure the changes reach the hardware before
357 	 * we exit the isr.
358 	 */
359 	if (sc->intreg != intreg) {
360 		WR4(sc, ECSPI_INTREG, sc->intreg);
361 		(void)RD4(sc, ECSPI_INTREG);
362 	}
363 
364 	if (sc->debug >= 3) {
365 		device_printf(sc->dev,
366 		    "spi_intr, sreg 0x%08x intreg was 0x%08x now 0x%08x\n",
367 		    status, intreg, sc->intreg);
368 	}
369 
370 	mtx_unlock(&sc->mtx);
371 }
372 
373 static int
374 spi_xfer_buf(struct spi_softc *sc, void *rxbuf, void *txbuf, uint32_t len)
375 {
376 	int err;
377 
378 	if (sc->debug >= 1) {
379 		device_printf(sc->dev,
380 		    "spi_xfer_buf, rxbuf %p txbuf %p len %u\n",
381 		    rxbuf, txbuf, len);
382 	}
383 
384 	if (len == 0)
385 		return (0);
386 
387 	sc->rxbuf = rxbuf;
388 	sc->rxlen = len;
389 	sc->rxidx = 0;
390 	sc->txbuf = txbuf;
391 	sc->txlen = len;
392 	sc->txidx = 0;
393 	sc->intreg = INTREG_RDREN | INTREG_TDREN;
394 	spi_fill_txfifo(sc);
395 
396 	/* Enable interrupts last; spi_fill_txfifo() can change sc->intreg */
397 	WR4(sc, ECSPI_INTREG, sc->intreg);
398 
399 	err = 0;
400 	while (err == 0 && sc->intreg != 0)
401 		err = msleep(sc, &sc->mtx, 0, "imxspi", 10 * hz);
402 
403 	if (sc->rxidx != sc->rxlen || sc->txidx != sc->txlen)
404 		err = EIO;
405 
406 	return (err);
407 }
408 
409 static int
410 spi_transfer(device_t dev, device_t child, struct spi_command *cmd)
411 {
412 	struct spi_softc *sc = device_get_softc(dev);
413 	uint32_t cs, mode, clock;
414 	int err;
415 
416 	spibus_get_cs(child, &cs);
417 	spibus_get_clock(child, &clock);
418 	spibus_get_mode(child, &mode);
419 
420 	if (cs > CS_MAX || sc->cspins[cs] == NULL) {
421 		if (sc->debug || bootverbose)
422 			device_printf(sc->dev, "Invalid chip select %u\n", cs);
423 		return (EINVAL);
424 	}
425 
426 	mtx_lock(&sc->mtx);
427 	device_busy(sc->dev);
428 
429 	if (sc->debug >= 1) {
430 		device_printf(sc->dev,
431 		    "spi_transfer, cs 0x%x clock %u mode %u\n",
432 		    cs, clock, mode);
433 	}
434 
435 	/* Set up the hardware and select the device. */
436 	spi_hw_setup(sc, cs, mode, clock);
437 	spi_set_chipsel(sc, cs, true);
438 
439 	/* Transfer command then data bytes. */
440 	err = 0;
441 	if (cmd->tx_cmd_sz > 0)
442 		err = spi_xfer_buf(sc, cmd->rx_cmd, cmd->tx_cmd,
443 		    cmd->tx_cmd_sz);
444 	if (cmd->tx_data_sz > 0 && err == 0)
445 		err = spi_xfer_buf(sc, cmd->rx_data, cmd->tx_data,
446 		    cmd->tx_data_sz);
447 
448 	/* Deselect the device, turn off (and reset) hardware. */
449 	spi_set_chipsel(sc, cs, false);
450 	WR4(sc, ECSPI_CTLREG, 0);
451 
452 	device_unbusy(sc->dev);
453 	mtx_unlock(&sc->mtx);
454 
455 	return (err);
456 }
457 
458 static phandle_t
459 spi_get_node(device_t bus, device_t dev)
460 {
461 
462 	/*
463 	 * Share our controller node with our spibus child; it instantiates
464 	 * devices by walking the children contained within our node.
465 	 */
466 	return ofw_bus_get_node(bus);
467 }
468 
469 static int
470 spi_detach(device_t dev)
471 {
472 	struct spi_softc *sc = device_get_softc(dev);
473 	int error, idx;
474 
475 	if ((error = bus_generic_detach(sc->dev)) != 0)
476 		return (error);
477 
478 	if (sc->spibus != NULL)
479 		device_delete_child(dev, sc->spibus);
480 
481 	for (idx = 0; idx < nitems(sc->cspins); ++idx) {
482 		if (sc->cspins[idx] != NULL)
483 			gpio_pin_release(sc->cspins[idx]);
484 	}
485 
486 	if (sc->inthandle != NULL)
487 		bus_teardown_intr(sc->dev, sc->intres, sc->inthandle);
488 	if (sc->intres != NULL)
489 		bus_release_resource(sc->dev, SYS_RES_IRQ, 0, sc->intres);
490 	if (sc->memres != NULL)
491 		bus_release_resource(sc->dev, SYS_RES_MEMORY, 0, sc->memres);
492 
493 	mtx_destroy(&sc->mtx);
494 
495 	return (0);
496 }
497 
498 static int
499 spi_attach(device_t dev)
500 {
501 	struct spi_softc *sc = device_get_softc(dev);
502 	phandle_t node;
503 	int err, idx, rid;
504 
505 	sc->dev = dev;
506 	sc->basefreq = imx_ccm_ecspi_hz();
507 
508 	mtx_init(&sc->mtx, device_get_nameunit(dev), NULL, MTX_DEF);
509 
510 	/* Set up debug-enable sysctl. */
511 	SYSCTL_ADD_INT(device_get_sysctl_ctx(sc->dev),
512 	    SYSCTL_CHILDREN(device_get_sysctl_tree(sc->dev)),
513 	    OID_AUTO, "debug", CTLFLAG_RWTUN, &sc->debug, 0,
514 	    "Enable debug, higher values = more info");
515 
516 	/* Allocate mmio register access resources. */
517 	rid = 0;
518 	sc->memres = bus_alloc_resource_any(sc->dev, SYS_RES_MEMORY, &rid,
519 	    RF_ACTIVE);
520 	if (sc->memres == NULL) {
521 		device_printf(sc->dev, "could not allocate registers\n");
522 		spi_detach(sc->dev);
523 		return (ENXIO);
524 	}
525 
526 	/* Allocate interrupt resources and set up handler. */
527 	rid = 0;
528 	sc->intres = bus_alloc_resource_any(sc->dev, SYS_RES_IRQ, &rid,
529 	    RF_ACTIVE);
530 	if (sc->intres == NULL) {
531 		device_printf(sc->dev, "could not allocate interrupt\n");
532 		device_detach(sc->dev);
533 		return (ENXIO);
534 	}
535 	err = bus_setup_intr(sc->dev, sc->intres, INTR_TYPE_MISC | INTR_MPSAFE,
536 	    NULL, spi_intr, sc, &sc->inthandle);
537 	if (err != 0) {
538 		device_printf(sc->dev, "could not setup interrupt handler");
539 		device_detach(sc->dev);
540 		return (ENXIO);
541 	}
542 
543 	/* Allocate gpio pins for configured chip selects. */
544 	node = ofw_bus_get_node(sc->dev);
545 	for (idx = 0; idx < nitems(sc->cspins); ++idx) {
546 		err = gpio_pin_get_by_ofw_propidx(sc->dev, node, "cs-gpios",
547 		    idx, &sc->cspins[idx]);
548 		if (err == 0) {
549 			gpio_pin_setflags(sc->cspins[idx], GPIO_PIN_OUTPUT);
550 		} else if (sc->debug >= 2) {
551 			device_printf(sc->dev,
552 			    "cannot configure gpio for chip select %u\n", idx);
553 		}
554 	}
555 
556 	/*
557 	 * Hardware init: put all channels into Master mode, turn off the enable
558 	 * bit (gates off clocks); we only enable the hardware while xfers run.
559 	 */
560 	WR4(sc, ECSPI_CTLREG, CTLREG_CMODES_MASTER);
561 
562 	/*
563 	 * Add the spibus driver as a child, and setup a one-shot intrhook to
564 	 * attach it after interrupts are working.  It will attach actual SPI
565 	 * devices as its children, and those devices may need to do IO during
566 	 * their attach. We can't do IO until timers and interrupts are working.
567 	 */
568 	sc->spibus = device_add_child(dev, "spibus", -1);
569 	return (bus_delayed_attach_children(dev));
570 }
571 
572 static int
573 spi_probe(device_t dev)
574 {
575 
576 	if (!ofw_bus_status_okay(dev))
577 		return (ENXIO);
578 
579 	if (!ofw_bus_search_compatible(dev, compat_data)->ocd_data)
580 		return (ENXIO);
581 
582 	device_set_desc(dev, "i.MX ECSPI Master");
583 	return (BUS_PROBE_DEFAULT);
584 }
585 
586 static device_method_t spi_methods[] = {
587 	DEVMETHOD(device_probe,		spi_probe),
588 	DEVMETHOD(device_attach,	spi_attach),
589 	DEVMETHOD(device_detach,	spi_detach),
590 
591         /* spibus_if  */
592 	DEVMETHOD(spibus_transfer,	spi_transfer),
593 
594         /* ofw_bus_if */
595 	DEVMETHOD(ofw_bus_get_node,	spi_get_node),
596 
597 	DEVMETHOD_END
598 };
599 
600 static driver_t spi_driver = {
601 	"imx_spi",
602 	spi_methods,
603 	sizeof(struct spi_softc),
604 };
605 
606 static devclass_t spi_devclass;
607 
608 DRIVER_MODULE(imx_spi, simplebus, spi_driver, spi_devclass, 0, 0);
609 DRIVER_MODULE(ofw_spibus, imx_spi, ofw_spibus_driver, ofw_spibus_devclass, 0, 0);
610 MODULE_DEPEND(imx_spi, ofw_spibus, 1, 1, 1);
611 SIMPLEBUS_PNP_INFO(compat_data);
612