1 /*- 2 * Copyright (C) 2008-2009 Semihalf, Michal Hajduk 3 * Copyright (c) 2012, 2013 The FreeBSD Foundation 4 * Copyright (c) 2015 Ian Lepore <ian@FreeBSD.org> 5 * All rights reserved. 6 * 7 * Portions of this software were developed by Oleksandr Rybalko 8 * under sponsorship from the FreeBSD Foundation. 9 * 10 * Redistribution and use in source and binary forms, with or without 11 * modification, are permitted provided that the following conditions 12 * are met: 13 * 1. Redistributions of source code must retain the above copyright 14 * notice, this list of conditions and the following disclaimer. 15 * 2. Redistributions in binary form must reproduce the above copyright 16 * notice, this list of conditions and the following disclaimer in the 17 * documentation and/or other materials provided with the distribution. 18 * 19 * THIS SOFTWARE IS PROVIDED BY AUTHOR AND CONTRIBUTORS ``AS IS'' AND 20 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 21 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 22 * ARE DISCLAIMED. IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE 23 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 24 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 25 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 26 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 27 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 28 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 29 * SUCH DAMAGE. 30 */ 31 32 /* 33 * I2C driver for Freescale i.MX hardware. 34 * 35 * Note that the hardware is capable of running as both a master and a slave. 36 * This driver currently implements only master-mode operations. 37 * 38 * This driver supports multi-master i2c busses, by detecting bus arbitration 39 * loss and returning IIC_EBUSBSY status. Notably, it does not do any kind of 40 * retries if some other master jumps onto the bus and interrupts one of our 41 * transfer cycles resulting in arbitration loss in mid-transfer. The caller 42 * must handle retries in a way that makes sense for the slave being addressed. 43 */ 44 45 #include <sys/cdefs.h> 46 __FBSDID("$FreeBSD$"); 47 48 #include <sys/param.h> 49 #include <sys/systm.h> 50 #include <sys/bus.h> 51 #include <sys/kernel.h> 52 #include <sys/limits.h> 53 #include <sys/module.h> 54 #include <sys/resource.h> 55 56 #include <machine/bus.h> 57 #include <machine/resource.h> 58 #include <sys/rman.h> 59 60 #include <arm/freescale/imx/imx_ccmvar.h> 61 62 #include <dev/iicbus/iiconf.h> 63 #include <dev/iicbus/iicbus.h> 64 #include "iicbus_if.h" 65 66 #include <dev/fdt/fdt_common.h> 67 #include <dev/ofw/openfirm.h> 68 #include <dev/ofw/ofw_bus.h> 69 #include <dev/ofw/ofw_bus_subr.h> 70 71 #define I2C_ADDR_REG 0x00 /* I2C slave address register */ 72 #define I2C_FDR_REG 0x04 /* I2C frequency divider register */ 73 #define I2C_CONTROL_REG 0x08 /* I2C control register */ 74 #define I2C_STATUS_REG 0x0C /* I2C status register */ 75 #define I2C_DATA_REG 0x10 /* I2C data register */ 76 #define I2C_DFSRR_REG 0x14 /* I2C Digital Filter Sampling rate */ 77 78 #define I2CCR_MEN (1 << 7) /* Module enable */ 79 #define I2CCR_MSTA (1 << 5) /* Master/slave mode */ 80 #define I2CCR_MTX (1 << 4) /* Transmit/receive mode */ 81 #define I2CCR_TXAK (1 << 3) /* Transfer acknowledge */ 82 #define I2CCR_RSTA (1 << 2) /* Repeated START */ 83 84 #define I2CSR_MCF (1 << 7) /* Data transfer */ 85 #define I2CSR_MASS (1 << 6) /* Addressed as a slave */ 86 #define I2CSR_MBB (1 << 5) /* Bus busy */ 87 #define I2CSR_MAL (1 << 4) /* Arbitration lost */ 88 #define I2CSR_SRW (1 << 2) /* Slave read/write */ 89 #define I2CSR_MIF (1 << 1) /* Module interrupt */ 90 #define I2CSR_RXAK (1 << 0) /* Received acknowledge */ 91 92 #define I2C_BAUD_RATE_FAST 0x31 93 #define I2C_BAUD_RATE_DEF 0x3F 94 #define I2C_DFSSR_DIV 0x10 95 96 /* 97 * A table of available divisors and the associated coded values to put in the 98 * FDR register to achieve that divisor.. There is no algorithmic relationship I 99 * can see between divisors and the codes that go into the register. The table 100 * begins and ends with entries that handle insane configuration values. 101 */ 102 struct clkdiv { 103 u_int divisor; 104 u_int regcode; 105 }; 106 static struct clkdiv clkdiv_table[] = { 107 { 0, 0x20 }, { 22, 0x20 }, { 24, 0x21 }, { 26, 0x22 }, 108 { 28, 0x23 }, { 30, 0x00 }, { 32, 0x24 }, { 36, 0x25 }, 109 { 40, 0x26 }, { 42, 0x03 }, { 44, 0x27 }, { 48, 0x28 }, 110 { 52, 0x05 }, { 56, 0x29 }, { 60, 0x06 }, { 64, 0x2a }, 111 { 72, 0x2b }, { 80, 0x2c }, { 88, 0x09 }, { 96, 0x2d }, 112 { 104, 0x0a }, { 112, 0x2e }, { 128, 0x2f }, { 144, 0x0c }, 113 { 160, 0x30 }, { 192, 0x31 }, { 224, 0x32 }, { 240, 0x0f }, 114 { 256, 0x33 }, { 288, 0x10 }, { 320, 0x34 }, { 384, 0x35 }, 115 { 448, 0x36 }, { 480, 0x13 }, { 512, 0x37 }, { 576, 0x14 }, 116 { 640, 0x38 }, { 768, 0x39 }, { 896, 0x3a }, { 960, 0x17 }, 117 { 1024, 0x3b }, { 1152, 0x18 }, { 1280, 0x3c }, { 1536, 0x3d }, 118 { 1792, 0x3e }, { 1920, 0x1b }, { 2048, 0x3f }, { 2304, 0x1c }, 119 { 2560, 0x1d }, { 3072, 0x1e }, { 3840, 0x1f }, {UINT_MAX, 0x1f} 120 }; 121 122 static struct ofw_compat_data compat_data[] = { 123 {"fsl,imx6q-i2c", 1}, 124 {"fsl,imx-i2c", 1}, 125 {NULL, 0} 126 }; 127 128 struct i2c_softc { 129 device_t dev; 130 device_t iicbus; 131 struct resource *res; 132 int rid; 133 sbintime_t byte_time_sbt; 134 }; 135 136 static phandle_t i2c_get_node(device_t, device_t); 137 static int i2c_probe(device_t); 138 static int i2c_attach(device_t); 139 140 static int i2c_repeated_start(device_t, u_char, int); 141 static int i2c_start(device_t, u_char, int); 142 static int i2c_stop(device_t); 143 static int i2c_reset(device_t, u_char, u_char, u_char *); 144 static int i2c_read(device_t, char *, int, int *, int, int); 145 static int i2c_write(device_t, const char *, int, int *, int); 146 147 static device_method_t i2c_methods[] = { 148 DEVMETHOD(device_probe, i2c_probe), 149 DEVMETHOD(device_attach, i2c_attach), 150 151 /* OFW methods */ 152 DEVMETHOD(ofw_bus_get_node, i2c_get_node), 153 154 DEVMETHOD(iicbus_callback, iicbus_null_callback), 155 DEVMETHOD(iicbus_repeated_start, i2c_repeated_start), 156 DEVMETHOD(iicbus_start, i2c_start), 157 DEVMETHOD(iicbus_stop, i2c_stop), 158 DEVMETHOD(iicbus_reset, i2c_reset), 159 DEVMETHOD(iicbus_read, i2c_read), 160 DEVMETHOD(iicbus_write, i2c_write), 161 DEVMETHOD(iicbus_transfer, iicbus_transfer_gen), 162 163 DEVMETHOD_END 164 }; 165 166 static driver_t i2c_driver = { 167 "iichb", 168 i2c_methods, 169 sizeof(struct i2c_softc), 170 }; 171 static devclass_t i2c_devclass; 172 173 DRIVER_MODULE(i2c, simplebus, i2c_driver, i2c_devclass, 0, 0); 174 DRIVER_MODULE(iicbus, i2c, iicbus_driver, iicbus_devclass, 0, 0); 175 176 static phandle_t 177 i2c_get_node(device_t bus, device_t dev) 178 { 179 /* 180 * Share controller node with iicbus device 181 */ 182 return ofw_bus_get_node(bus); 183 } 184 185 static __inline void 186 i2c_write_reg(struct i2c_softc *sc, bus_size_t off, uint8_t val) 187 { 188 189 bus_write_1(sc->res, off, val); 190 } 191 192 static __inline uint8_t 193 i2c_read_reg(struct i2c_softc *sc, bus_size_t off) 194 { 195 196 return (bus_read_1(sc->res, off)); 197 } 198 199 static __inline void 200 i2c_flag_set(struct i2c_softc *sc, bus_size_t off, uint8_t mask) 201 { 202 uint8_t status; 203 204 status = i2c_read_reg(sc, off); 205 status |= mask; 206 i2c_write_reg(sc, off, status); 207 } 208 209 /* Wait for bus to become busy or not-busy. */ 210 static int 211 wait_for_busbusy(struct i2c_softc *sc, int wantbusy) 212 { 213 int retry, srb; 214 215 retry = 1000; 216 while (retry --) { 217 srb = i2c_read_reg(sc, I2C_STATUS_REG) & I2CSR_MBB; 218 if ((srb && wantbusy) || (!srb && !wantbusy)) 219 return (IIC_NOERR); 220 DELAY(1); 221 } 222 return (IIC_ETIMEOUT); 223 } 224 225 /* Wait for transfer to complete, optionally check RXAK. */ 226 static int 227 wait_for_xfer(struct i2c_softc *sc, int checkack) 228 { 229 int retry, sr; 230 231 /* 232 * Sleep for about the time it takes to transfer a byte (with precision 233 * set to tolerate 5% oversleep). We calculate the approximate byte 234 * transfer time when we set the bus speed divisor. Slaves are allowed 235 * to do clock-stretching so the actual transfer time can be larger, but 236 * this gets the bulk of the waiting out of the way without tying up the 237 * processor the whole time. 238 */ 239 pause_sbt("imxi2c", sc->byte_time_sbt, sc->byte_time_sbt / 20, 0); 240 241 retry = 10000; 242 while (retry --) { 243 sr = i2c_read_reg(sc, I2C_STATUS_REG); 244 if (sr & I2CSR_MIF) { 245 if (sr & I2CSR_MAL) 246 return (IIC_EBUSERR); 247 else if (checkack && (sr & I2CSR_RXAK)) 248 return (IIC_ENOACK); 249 else 250 return (IIC_NOERR); 251 } 252 DELAY(1); 253 } 254 return (IIC_ETIMEOUT); 255 } 256 257 /* 258 * Implement the error handling shown in the state diagram of the imx6 reference 259 * manual. If there was an error, then: 260 * - Clear master mode (MSTA and MTX). 261 * - Wait for the bus to become free or for a timeout to happen. 262 * - Disable the controller. 263 */ 264 static int 265 i2c_error_handler(struct i2c_softc *sc, int error) 266 { 267 268 if (error != 0) { 269 i2c_write_reg(sc, I2C_STATUS_REG, 0); 270 i2c_write_reg(sc, I2C_CONTROL_REG, I2CCR_MEN); 271 wait_for_busbusy(sc, false); 272 i2c_write_reg(sc, I2C_CONTROL_REG, 0); 273 } 274 return (error); 275 } 276 277 static int 278 i2c_probe(device_t dev) 279 { 280 281 if (!ofw_bus_status_okay(dev)) 282 return (ENXIO); 283 284 if (ofw_bus_search_compatible(dev, compat_data)->ocd_data == 0) 285 return (ENXIO); 286 287 device_set_desc(dev, "Freescale i.MX I2C"); 288 289 return (BUS_PROBE_DEFAULT); 290 } 291 292 static int 293 i2c_attach(device_t dev) 294 { 295 struct i2c_softc *sc; 296 297 sc = device_get_softc(dev); 298 sc->dev = dev; 299 sc->rid = 0; 300 301 sc->res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &sc->rid, 302 RF_ACTIVE); 303 if (sc->res == NULL) { 304 device_printf(dev, "could not allocate resources"); 305 return (ENXIO); 306 } 307 308 sc->iicbus = device_add_child(dev, "iicbus", -1); 309 if (sc->iicbus == NULL) { 310 device_printf(dev, "could not add iicbus child"); 311 return (ENXIO); 312 } 313 314 bus_generic_attach(dev); 315 return (0); 316 } 317 318 static int 319 i2c_repeated_start(device_t dev, u_char slave, int timeout) 320 { 321 struct i2c_softc *sc; 322 int error; 323 324 sc = device_get_softc(dev); 325 326 if ((i2c_read_reg(sc, I2C_STATUS_REG) & I2CSR_MBB) == 0) { 327 return (IIC_EBUSERR); 328 } 329 330 /* 331 * Set repeated start condition, delay (per reference manual, min 156nS) 332 * before writing slave address, wait for ack after write. 333 */ 334 i2c_flag_set(sc, I2C_CONTROL_REG, I2CCR_RSTA); 335 DELAY(1); 336 i2c_write_reg(sc, I2C_STATUS_REG, 0x0); 337 i2c_write_reg(sc, I2C_DATA_REG, slave); 338 error = wait_for_xfer(sc, true); 339 return (i2c_error_handler(sc, error)); 340 } 341 342 static int 343 i2c_start(device_t dev, u_char slave, int timeout) 344 { 345 struct i2c_softc *sc; 346 int error; 347 348 sc = device_get_softc(dev); 349 350 i2c_write_reg(sc, I2C_CONTROL_REG, I2CCR_MEN); 351 DELAY(10); /* Delay for controller to sample bus state. */ 352 if (i2c_read_reg(sc, I2C_STATUS_REG) & I2CSR_MBB) { 353 return (i2c_error_handler(sc, IIC_EBUSERR)); 354 } 355 i2c_write_reg(sc, I2C_CONTROL_REG, I2CCR_MEN | I2CCR_MSTA | I2CCR_MTX); 356 if ((error = wait_for_busbusy(sc, true)) != IIC_NOERR) 357 return (i2c_error_handler(sc, error)); 358 i2c_write_reg(sc, I2C_STATUS_REG, 0); 359 i2c_write_reg(sc, I2C_DATA_REG, slave); 360 error = wait_for_xfer(sc, true); 361 return (i2c_error_handler(sc, error)); 362 } 363 364 static int 365 i2c_stop(device_t dev) 366 { 367 struct i2c_softc *sc; 368 369 sc = device_get_softc(dev); 370 371 i2c_write_reg(sc, I2C_CONTROL_REG, I2CCR_MEN); 372 wait_for_busbusy(sc, false); 373 i2c_write_reg(sc, I2C_CONTROL_REG, 0); 374 return (IIC_NOERR); 375 } 376 377 static int 378 i2c_reset(device_t dev, u_char speed, u_char addr, u_char *oldadr) 379 { 380 struct i2c_softc *sc; 381 u_int busfreq, div, i, ipgfreq; 382 383 sc = device_get_softc(dev); 384 385 /* 386 * Look up the divisor that gives the nearest speed that doesn't exceed 387 * the configured value for the bus. 388 */ 389 ipgfreq = imx_ccm_ipg_hz(); 390 busfreq = IICBUS_GET_FREQUENCY(sc->iicbus, speed); 391 div = howmany(ipgfreq, busfreq); 392 for (i = 0; i < nitems(clkdiv_table); i++) { 393 if (clkdiv_table[i].divisor >= div) 394 break; 395 } 396 397 /* 398 * Calculate roughly how long it will take to transfer a byte (which 399 * requires 9 clock cycles) at the new bus speed. This value is used to 400 * pause() while waiting for transfer-complete. With a 66MHz IPG clock 401 * and the actual i2c bus speeds that leads to, for nominal 100KHz and 402 * 400KHz bus speeds the transfer times are roughly 104uS and 22uS. 403 */ 404 busfreq = ipgfreq / clkdiv_table[i].divisor; 405 sc->byte_time_sbt = SBT_1US * (9000000 / busfreq); 406 407 /* 408 * Disable the controller (do the reset), and set the new clock divisor. 409 */ 410 i2c_write_reg(sc, I2C_STATUS_REG, 0x0); 411 i2c_write_reg(sc, I2C_CONTROL_REG, 0x0); 412 i2c_write_reg(sc, I2C_FDR_REG, (uint8_t)clkdiv_table[i].regcode); 413 return (IIC_NOERR); 414 } 415 416 static int 417 i2c_read(device_t dev, char *buf, int len, int *read, int last, int delay) 418 { 419 struct i2c_softc *sc; 420 int error, reg; 421 422 sc = device_get_softc(dev); 423 *read = 0; 424 425 if (len) { 426 if (len == 1) 427 i2c_write_reg(sc, I2C_CONTROL_REG, I2CCR_MEN | 428 I2CCR_MSTA | I2CCR_TXAK); 429 else 430 i2c_write_reg(sc, I2C_CONTROL_REG, I2CCR_MEN | 431 I2CCR_MSTA); 432 /* Dummy read to prime the receiver. */ 433 i2c_write_reg(sc, I2C_STATUS_REG, 0x0); 434 i2c_read_reg(sc, I2C_DATA_REG); 435 } 436 437 error = 0; 438 *read = 0; 439 while (*read < len) { 440 if ((error = wait_for_xfer(sc, false)) != IIC_NOERR) 441 break; 442 i2c_write_reg(sc, I2C_STATUS_REG, 0x0); 443 if (last) { 444 if (*read == len - 2) { 445 /* NO ACK on last byte */ 446 i2c_write_reg(sc, I2C_CONTROL_REG, I2CCR_MEN | 447 I2CCR_MSTA | I2CCR_TXAK); 448 } else if (*read == len - 1) { 449 /* Transfer done, signal stop. */ 450 i2c_write_reg(sc, I2C_CONTROL_REG, I2CCR_MEN | 451 I2CCR_TXAK); 452 wait_for_busbusy(sc, false); 453 } 454 } 455 reg = i2c_read_reg(sc, I2C_DATA_REG); 456 *buf++ = reg; 457 (*read)++; 458 } 459 460 return (i2c_error_handler(sc, error)); 461 } 462 463 static int 464 i2c_write(device_t dev, const char *buf, int len, int *sent, int timeout) 465 { 466 struct i2c_softc *sc; 467 int error; 468 469 sc = device_get_softc(dev); 470 471 error = 0; 472 *sent = 0; 473 while (*sent < len) { 474 i2c_write_reg(sc, I2C_STATUS_REG, 0x0); 475 i2c_write_reg(sc, I2C_DATA_REG, *buf++); 476 if ((error = wait_for_xfer(sc, true)) != IIC_NOERR) 477 break; 478 (*sent)++; 479 } 480 481 return (i2c_error_handler(sc, error)); 482 } 483