1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause-FreeBSD 3 * 4 * Copyright (c) 2013 Ian Lepore <ian@freebsd.org> 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 19 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 20 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 22 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 26 * SUCH DAMAGE. 27 */ 28 29 #include "opt_platform.h" 30 31 #include <sys/cdefs.h> 32 __FBSDID("$FreeBSD$"); 33 34 #include <sys/param.h> 35 #include <sys/systm.h> 36 #include <sys/bus.h> 37 #include <sys/reboot.h> 38 #include <sys/devmap.h> 39 40 #include <vm/vm.h> 41 42 #include <machine/bus.h> 43 #include <machine/intr.h> 44 #include <machine/machdep.h> 45 #include <machine/platformvar.h> 46 47 #include <arm/arm/mpcore_timervar.h> 48 #include <arm/freescale/imx/imx6_anatopreg.h> 49 #include <arm/freescale/imx/imx6_anatopvar.h> 50 #include <arm/freescale/imx/imx_machdep.h> 51 52 #include <dev/fdt/fdt_common.h> 53 #include <dev/ofw/openfirm.h> 54 55 #include <arm/freescale/imx/imx6_machdep.h> 56 57 #include "platform_if.h" 58 #include "platform_pl310_if.h" 59 60 static platform_attach_t imx6_attach; 61 static platform_devmap_init_t imx6_devmap_init; 62 static platform_late_init_t imx6_late_init; 63 static platform_cpu_reset_t imx6_cpu_reset; 64 65 /* 66 * Fix FDT data related to interrupts. 67 * 68 * Driven by the needs of linux and its drivers (as always), the published FDT 69 * data for imx6 now sets the interrupt parent for most devices to the GPC 70 * interrupt controller, which is for use when the chip is in deep-sleep mode. 71 * We don't support deep sleep or have a GPC-PIC driver; we need all interrupts 72 * to be handled by the GIC. 73 * 74 * Luckily, the change to the FDT data was to assign the GPC as the interrupt 75 * parent for the soc node and letting that get inherited by all other devices 76 * (except a few that directly name GIC as their interrupt parent). So we can 77 * set the world right by just changing the interrupt-parent property of the soc 78 * node to refer to GIC instead of GPC. This will get us by until we write our 79 * own GPC driver (or until linux changes its mind and the FDT data again). 80 * 81 * We validate that we have data that looks like we expect before changing it: 82 * - SOC node exists and has GPC as its interrupt parent. 83 * - GPC node exists and has GIC as its interrupt parent. 84 * - GIC node exists and is its own interrupt parent or has no parent. 85 * 86 * This applies to all models of imx6. Luckily all of them have the devices 87 * involved at the same addresses on the same buses, so we don't need any 88 * per-soc logic. We handle this at platform attach time rather than via the 89 * fdt_fixup_table, because the latter requires matching on the FDT "model" 90 * property, and this applies to all boards including those not yet invented. 91 * 92 * This just in: as of the import of dts files from linux 4.15 on 2018-02-10, 93 * they appear to have applied a new style rule to the dts which forbids leading 94 * zeroes in the @address qualifiers on node names. Since we have to find those 95 * nodes by string matching we now have to search for both flavors of each node 96 * name involved. 97 */ 98 static void 99 fix_fdt_interrupt_data(void) 100 { 101 phandle_t gicipar, gicnode, gicxref; 102 phandle_t gpcipar, gpcnode, gpcxref; 103 phandle_t socipar, socnode; 104 int result; 105 106 socnode = OF_finddevice("/soc"); 107 if (socnode == -1) 108 return; 109 result = OF_getencprop(socnode, "interrupt-parent", &socipar, 110 sizeof(socipar)); 111 if (result <= 0) 112 return; 113 114 /* GIC node may be child of soc node, or appear directly at root. */ 115 gicnode = OF_finddevice("/soc/interrupt-controller@00a01000"); 116 if (gicnode == -1) 117 gicnode = OF_finddevice("/soc/interrupt-controller@a01000"); 118 if (gicnode == -1) { 119 gicnode = OF_finddevice("/interrupt-controller@00a01000"); 120 if (gicnode == -1) 121 gicnode = OF_finddevice("/interrupt-controller@a01000"); 122 if (gicnode == -1) 123 return; 124 } 125 gicxref = OF_xref_from_node(gicnode); 126 127 /* If gic node has no parent, pretend it is its own parent. */ 128 result = OF_getencprop(gicnode, "interrupt-parent", &gicipar, 129 sizeof(gicipar)); 130 if (result <= 0) 131 gicipar = gicxref; 132 133 gpcnode = OF_finddevice("/soc/aips-bus@02000000/gpc@020dc000"); 134 if (gpcnode == -1) 135 gpcnode = OF_finddevice("/soc/aips-bus@2000000/gpc@20dc000"); 136 if (gpcnode == -1) 137 return; 138 result = OF_getencprop(gpcnode, "interrupt-parent", &gpcipar, 139 sizeof(gpcipar)); 140 if (result <= 0) 141 return; 142 gpcxref = OF_xref_from_node(gpcnode); 143 144 if (socipar != gpcxref || gpcipar != gicxref || gicipar != gicxref) 145 return; 146 147 gicxref = cpu_to_fdt32(gicxref); 148 OF_setprop(socnode, "interrupt-parent", &gicxref, sizeof(gicxref)); 149 } 150 151 static int 152 imx6_attach(platform_t plat) 153 { 154 155 /* Fix soc interrupt-parent property. */ 156 fix_fdt_interrupt_data(); 157 158 /* Inform the MPCore timer driver that its clock is variable. */ 159 arm_tmr_change_frequency(ARM_TMR_FREQUENCY_VARIES); 160 161 return (0); 162 } 163 164 static void 165 imx6_late_init(platform_t plat) 166 { 167 const uint32_t IMX6_WDOG_SR_PHYS = 0x020bc004; 168 169 imx_wdog_init_last_reset(IMX6_WDOG_SR_PHYS); 170 } 171 172 /* 173 * Set up static device mappings. 174 * 175 * This attempts to cover the most-used devices with 1MB section mappings, which 176 * is good for performance (uses fewer TLB entries for device access). 177 * 178 * ARMMP covers the interrupt controller, MPCore timers, global timer, and the 179 * L2 cache controller. Most of the 1MB range is unused reserved space. 180 * 181 * AIPS1/AIPS2 cover most of the on-chip devices such as uart, spi, i2c, etc. 182 * 183 * Notably not mapped right now are HDMI, GPU, and other devices below ARMMP in 184 * the memory map. When we get support for graphics it might make sense to 185 * static map some of that area. Be careful with other things in that area such 186 * as OCRAM that probably shouldn't be mapped as VM_MEMATTR_DEVICE memory. 187 */ 188 static int 189 imx6_devmap_init(platform_t plat) 190 { 191 const uint32_t IMX6_ARMMP_PHYS = 0x00a00000; 192 const uint32_t IMX6_ARMMP_SIZE = 0x00100000; 193 const uint32_t IMX6_AIPS1_PHYS = 0x02000000; 194 const uint32_t IMX6_AIPS1_SIZE = 0x00100000; 195 const uint32_t IMX6_AIPS2_PHYS = 0x02100000; 196 const uint32_t IMX6_AIPS2_SIZE = 0x00100000; 197 198 devmap_add_entry(IMX6_ARMMP_PHYS, IMX6_ARMMP_SIZE); 199 devmap_add_entry(IMX6_AIPS1_PHYS, IMX6_AIPS1_SIZE); 200 devmap_add_entry(IMX6_AIPS2_PHYS, IMX6_AIPS2_SIZE); 201 202 return (0); 203 } 204 205 static void 206 imx6_cpu_reset(platform_t plat) 207 { 208 const uint32_t IMX6_WDOG_CR_PHYS = 0x020bc000; 209 210 imx_wdog_cpu_reset(IMX6_WDOG_CR_PHYS); 211 } 212 213 /* 214 * Determine what flavor of imx6 we're running on. 215 * 216 * This code is based on the way u-boot does it. Information found on the web 217 * indicates that Freescale themselves were the original source of this logic, 218 * including the strange check for number of CPUs in the SCU configuration 219 * register, which is apparently needed on some revisions of the SOLO. 220 * 221 * According to the documentation, there is such a thing as an i.MX6 Dual 222 * (non-lite flavor). However, Freescale doesn't seem to have assigned it a 223 * number or provided any logic to handle it in their detection code. 224 * 225 * Note that the ANALOG_DIGPROG and SCU configuration registers are not 226 * documented in the chip reference manual. (SCU configuration is mentioned, 227 * but not mapped out in detail.) I think the bottom two bits of the scu config 228 * register may be ncpu-1. 229 * 230 * This hasn't been tested yet on a dual[-lite]. 231 * 232 * On a solo: 233 * digprog = 0x00610001 234 * hwsoc = 0x00000062 235 * scu config = 0x00000500 236 * On a quad: 237 * digprog = 0x00630002 238 * hwsoc = 0x00000063 239 * scu config = 0x00005503 240 */ 241 u_int 242 imx_soc_type(void) 243 { 244 uint32_t digprog, hwsoc; 245 uint32_t *pcr; 246 static u_int soctype; 247 const vm_offset_t SCU_CONFIG_PHYSADDR = 0x00a00004; 248 #define HWSOC_MX6SL 0x60 249 #define HWSOC_MX6DL 0x61 250 #define HWSOC_MX6SOLO 0x62 251 #define HWSOC_MX6Q 0x63 252 #define HWSOC_MX6UL 0x64 253 254 if (soctype != 0) 255 return (soctype); 256 257 digprog = imx6_anatop_read_4(IMX6_ANALOG_DIGPROG_SL); 258 hwsoc = (digprog >> IMX6_ANALOG_DIGPROG_SOCTYPE_SHIFT) & 259 IMX6_ANALOG_DIGPROG_SOCTYPE_MASK; 260 261 if (hwsoc != HWSOC_MX6SL) { 262 digprog = imx6_anatop_read_4(IMX6_ANALOG_DIGPROG); 263 hwsoc = (digprog & IMX6_ANALOG_DIGPROG_SOCTYPE_MASK) >> 264 IMX6_ANALOG_DIGPROG_SOCTYPE_SHIFT; 265 /*printf("digprog = 0x%08x\n", digprog);*/ 266 if (hwsoc == HWSOC_MX6DL) { 267 pcr = devmap_ptov(SCU_CONFIG_PHYSADDR, 4); 268 if (pcr != NULL) { 269 /*printf("scu config = 0x%08x\n", *pcr);*/ 270 if ((*pcr & 0x03) == 0) { 271 hwsoc = HWSOC_MX6SOLO; 272 } 273 } 274 } 275 } 276 /* printf("hwsoc 0x%08x\n", hwsoc); */ 277 278 switch (hwsoc) { 279 case HWSOC_MX6SL: 280 soctype = IMXSOC_6SL; 281 break; 282 case HWSOC_MX6SOLO: 283 soctype = IMXSOC_6S; 284 break; 285 case HWSOC_MX6DL: 286 soctype = IMXSOC_6DL; 287 break; 288 case HWSOC_MX6Q : 289 soctype = IMXSOC_6Q; 290 break; 291 case HWSOC_MX6UL: 292 soctype = IMXSOC_6UL; 293 break; 294 default: 295 printf("imx_soc_type: Don't understand hwsoc 0x%02x, " 296 "digprog 0x%08x; assuming IMXSOC_6Q\n", hwsoc, digprog); 297 soctype = IMXSOC_6Q; 298 break; 299 } 300 301 return (soctype); 302 } 303 304 /* 305 * Early putc routine for EARLY_PRINTF support. To use, add to kernel config: 306 * option SOCDEV_PA=0x02000000 307 * option SOCDEV_VA=0x02000000 308 * option EARLY_PRINTF 309 * Resist the temptation to change the #if 0 to #ifdef EARLY_PRINTF here. It 310 * makes sense now, but if multiple SOCs do that it will make early_putc another 311 * duplicate symbol to be eliminated on the path to a generic kernel. 312 */ 313 #if 0 314 static void 315 imx6_early_putc(int c) 316 { 317 volatile uint32_t * UART_STAT_REG = (uint32_t *)0x02020098; 318 volatile uint32_t * UART_TX_REG = (uint32_t *)0x02020040; 319 const uint32_t UART_TXRDY = (1 << 3); 320 321 while ((*UART_STAT_REG & UART_TXRDY) == 0) 322 continue; 323 *UART_TX_REG = c; 324 } 325 early_putc_t *early_putc = imx6_early_putc; 326 #endif 327 328 static platform_method_t imx6_methods[] = { 329 PLATFORMMETHOD(platform_attach, imx6_attach), 330 PLATFORMMETHOD(platform_devmap_init, imx6_devmap_init), 331 PLATFORMMETHOD(platform_late_init, imx6_late_init), 332 PLATFORMMETHOD(platform_cpu_reset, imx6_cpu_reset), 333 334 #ifdef SMP 335 PLATFORMMETHOD(platform_mp_start_ap, imx6_mp_start_ap), 336 PLATFORMMETHOD(platform_mp_setmaxid, imx6_mp_setmaxid), 337 #endif 338 339 PLATFORMMETHOD(platform_pl310_init, imx6_pl310_init), 340 341 PLATFORMMETHOD_END, 342 }; 343 344 FDT_PLATFORM_DEF2(imx6, imx6s, "i.MX6 Solo", 0, "fsl,imx6s", 80); 345 FDT_PLATFORM_DEF2(imx6, imx6d, "i.MX6 Dual", 0, "fsl,imx6dl", 80); 346 FDT_PLATFORM_DEF2(imx6, imx6q, "i.MX6 Quad", 0, "fsl,imx6q", 80); 347 FDT_PLATFORM_DEF2(imx6, imx6ul, "i.MX6 UltraLite", 0, "fsl,imx6ul", 67); 348