xref: /freebsd/sys/arm/conf/TEGRA124 (revision 6faf55c86d9b86f40de8d19970e42cb42a892c47)
1#
2# Kernel configuration for NVIDIA Tegra124 based boards.
3#
4# For more information on this file, please read the config(5) manual page,
5# and/or the handbook section on Kernel Configuration Files:
6#
7#    https://docs.freebsd.org/en/books/handbook/kernelconfig/#kernelconfig-config
8#
9# The handbook is also available locally in /usr/share/doc/handbook
10# if you've installed the doc distribution, otherwise always see the
11# FreeBSD World Wide Web server (https://www.FreeBSD.org/) for the
12# latest information.
13#
14# An exhaustive list of options and more detailed explanations of the
15# device lines is also present in the ../../conf/NOTES and NOTES files.
16# If you are in doubt as to the purpose or necessity of a line, check first
17# in NOTES.
18#
19
20include  	"std.armv7"
21include 	"../nvidia/tegra124/std.tegra124"
22
23ident		TEGRA124
24
25options 	SCHED_ULE		# ULE scheduler
26options 	PLATFORM		# Platform based SoC
27options 	SMP			# Enable multiple cores
28options 	LINUX_BOOT_ABI
29
30# Interrupt controller
31device		gic
32
33# ARM Generic Timer
34device		generic_timer
35
36# pseudo devices
37device		clk
38device		phy
39device		hwreset
40device		regulator
41device		syscon
42
43# Pseudo devices.
44device		loop			# Network loopback
45device		vlan			# 802.1Q VLAN support
46#device		tuntap			# Packet tunnel.
47device		md			# Memory "disks"
48#device		gif			# IPv6 and IPv4 tunneling
49device		firmware		# firmware assist module
50device		ether			# Ethernet support
51device		miibus			# Required for ethernet
52device		bpf			# Berkeley packet filter (required for DHCP)
53
54
55# General-purpose input/output
56device		gpio
57#device		gpioled
58
59# I2C support
60device		iic
61device		iicbus
62device		icee
63
64# Serial (COM) ports
65device		uart			# Multi-uart driver
66device		uart_ns8250
67
68# MMC/SD/SDIO Card slot support
69device		sdhci			# SD controller
70device		mmc			# SD/MMC protocol
71device		mmcsd			# SDCard disk device
72
73# ATA controllers
74device		ahci			# AHCI-compatible SATA controllers
75
76# SCSI peripherals
77device		scbus			# SCSI bus (required for ATA/SCSI)
78device		da			# Direct Access (disks)
79device		cd			# CD
80device		pass			# Passthrough device (direct ATA/SCSI access)
81
82# USB support
83options 	USB_HOST_ALIGN=64	# Align usb buffers to cache line size.
84device		ehci			# EHCI USB interface
85device		xhci			# XHCI USB interface
86device		tegra124_xusb_fw	# Tegra XUSB firmware
87device		usb			# USB Bus (required)
88device		umass			# Disks/Mass storage - Requires scbus and da
89device		uhid			# "Human Interface Devices"
90#device		u3g			# USB modems
91device		ukbd			# Allow keyboard like HIDs to control console
92device		ums			# USB mouse
93
94# USB Ethernet, requires miibus
95#device		aue			# ADMtek USB Ethernet
96#device		axe			# ASIX Electronics USB Ethernet
97#device		cdce			# Generic USB over Ethernet
98#device		cue			# CATC USB Ethernet
99#device		kue			# Kawasaki LSI USB Ethernet
100#device		rue			# RealTek RTL8150 USB Ethernet
101#device		udav			# Davicom DM9601E USB
102
103# USB Wireless
104#device		rum			# Ralink Technology RT2501USB wireless NICs
105
106# Wireless NIC cards
107#device		wlan			# 802.11 support
108#device		wlan_wep		# 802.11 WEP support
109#device		wlan_ccmp		# 802.11 CCMP support
110#device		wlan_tkip		# 802.11 TKIP support
111#device		wlan_amrr		# AMRR transmit rate control algorithm
112
113# PCI
114device		pci
115
116# PCI Ethernet NICs that use the common MII bus controller code.
117# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
118device		re			# RealTek 8139C+/8169/8169S/8110S
119
120# DRM2
121device		fbd
122device		vt
123device		kbdmux
124device		drm2
125
126# Sound
127#device		sound
128#device		snd_hda
129
130# HID support
131device		hid			# Generic HID support
132
133# Flattened Device Tree
134options 	FDT			# Configure using FDT/DTB data
135device  	fdt_pinctrl
136
137# SoC-specific devices
138
139#device  	hwpmc
140