1# Kernel configuration for Alpine Board. 2# 3# For more information on this file, please read the config(5) manual page, 4# and/or the handbook section on Kernel Configuration Files: 5# 6# https://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html 7# 8# The handbook is also available locally in /usr/share/doc/handbook 9# if you've installed the doc distribution, otherwise always see the 10# FreeBSD World Wide Web server (https://www.FreeBSD.org/) for the 11# latest information. 12# 13# An exhaustive list of options and more detailed explanations of the 14# device lines is also present in the ../../conf/NOTES and NOTES files. 15# If you are in doubt as to the purpose or necessity of a line, check first 16# in NOTES. 17# 18# $FreeBSD$ 19 20ident ALPINE 21 22include "std.armv7" 23include "../annapurna/alpine/std.alpine" 24 25makeoptions MODULES_OVERRIDE="" 26makeoptions WERROR="-Werror" 27 28options SCHED_4BSD # 4BSD scheduler 29options SMP # Enable multiple cores 30options PLATFORM 31 32# Interrupt controller 33device gic 34 35# Annapurna Alpine drivers 36device al_ccu # Alpine Cache Coherency Unit 37device al_nb_service # Alpine North Bridge Service 38device al_iofic # I/O Fabric Interrupt Controller 39device al_serdes # Serializer/Deserializer 40device al_udma # Universal DMA 41 42# Pseudo devices 43device loop 44device random 45device pty 46device md 47device gpio 48 49# ATA controllers 50device ahci # AHCI-compatible SATA controllers 51device ata # Legacy ATA/SATA controllers 52 53# ATA/SCSI peripherals 54device scbus # SCSI bus (required for ATA/SCSI) 55device ch # SCSI media changers 56device da # Direct Access (disks) 57device sa # Sequential Access (tape etc) 58device cd # CD 59device pass # Passthrough device (direct ATA/SCSI access) 60device ses # Enclosure Services (SES and SAF-TE) 61#device ctl # CAM Target Layer 62 63# Serial ports 64device uart 65 66# PCI/PCIE 67device pci 68device pci_host_generic 69device al_pci # Annapurna Alpine PCI-E 70 71# Ethernet 72device ether 73device mii 74device bpf 75device al_eth # Annapurna Alpine Ethernet NIC 76options DEVICE_POLLING 77 78# USB ethernet support, requires miibus 79device miibus 80 81#FDT 82options FDT 83options FDT_DTB_STATIC 84makeoptions FDT_DTS_FILE=annapurna-alpine.dts 85