1# Kernel configuration for Alpine Board. 2# 3# For more information on this file, please read the config(5) manual page, 4# and/or the handbook section on Kernel Configuration Files: 5# 6# https://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html 7# 8# The handbook is also available locally in /usr/share/doc/handbook 9# if you've installed the doc distribution, otherwise always see the 10# FreeBSD World Wide Web server (https://www.FreeBSD.org/) for the 11# latest information. 12# 13# An exhaustive list of options and more detailed explanations of the 14# device lines is also present in the ../../conf/NOTES and NOTES files. 15# If you are in doubt as to the purpose or necessity of a line, check first 16# in NOTES. 17# 18# $FreeBSD$ 19 20ident ALPINE 21 22include "std.armv7" 23include "../annapurna/alpine/std.alpine" 24 25makeoptions MODULES_OVERRIDE="" 26 27options SCHED_4BSD # 4BSD scheduler 28options SMP # Enable multiple cores 29options PLATFORM 30 31# Interrupt controller 32device gic 33 34# Annapurna Alpine drivers 35device al_ccu # Alpine Cache Coherency Unit 36device al_nb_service # Alpine North Bridge Service 37device al_iofic # I/O Fabric Interrupt Controller 38device al_serdes # Serializer/Deserializer 39device al_udma # Universal DMA 40 41# Pseudo devices 42device loop 43device pty 44device md 45device gpio 46 47# ATA controllers 48device ahci # AHCI-compatible SATA controllers 49device ata # Legacy ATA/SATA controllers 50 51# ATA/SCSI peripherals 52device scbus # SCSI bus (required for ATA/SCSI) 53device ch # SCSI media changers 54device da # Direct Access (disks) 55device sa # Sequential Access (tape etc) 56device cd # CD 57device pass # Passthrough device (direct ATA/SCSI access) 58device ses # Enclosure Services (SES and SAF-TE) 59#device ctl # CAM Target Layer 60 61# Serial ports 62device uart 63 64# PCI/PCIE 65device pci 66device pci_host_generic 67device al_pci # Annapurna Alpine PCI-E 68 69# Ethernet 70device ether 71device mii 72device bpf 73device al_eth # Annapurna Alpine Ethernet NIC 74options DEVICE_POLLING 75 76# USB ethernet support, requires miibus 77device miibus 78 79#FDT 80options FDT 81options FDT_DTB_STATIC 82makeoptions FDT_DTS_FILE=annapurna-alpine.dts 83