1 /*- 2 * Copyright (C) 2015 Daisuke Aoyama <aoyama@peach.ne.jp> 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 15 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 16 * 17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 18 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 19 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 20 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 21 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 22 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 23 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 24 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 25 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 26 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 27 * SUCH DAMAGE. 28 * 29 */ 30 31 #include <sys/cdefs.h> 32 __FBSDID("$FreeBSD$"); 33 34 #include <sys/param.h> 35 #include <sys/systm.h> 36 #include <sys/kernel.h> 37 #include <sys/bus.h> 38 #include <sys/smp.h> 39 40 #include <vm/vm.h> 41 #include <vm/pmap.h> 42 43 #include <machine/cpu.h> 44 #include <machine/smp.h> 45 #include <machine/bus.h> 46 #include <machine/fdt.h> 47 #include <machine/intr.h> 48 #include <machine/platformvar.h> 49 50 #include <arm/broadcom/bcm2835/bcm2836_mp.h> 51 52 #ifdef DEBUG 53 #define DPRINTF(fmt, ...) do { \ 54 printf("%s:%u: ", __func__, __LINE__); \ 55 printf(fmt, ##__VA_ARGS__); \ 56 } while (0) 57 #else 58 #define DPRINTF(fmt, ...) 59 #endif 60 61 #define ARM_LOCAL_BASE 0x40000000 62 #define ARM_LOCAL_SIZE 0x00001000 63 64 /* mailbox registers */ 65 #define MBOXINTRCTRL_CORE(n) (0x00000050 + (0x04 * (n))) 66 #define MBOX0SET_CORE(n) (0x00000080 + (0x10 * (n))) 67 #define MBOX1SET_CORE(n) (0x00000084 + (0x10 * (n))) 68 #define MBOX2SET_CORE(n) (0x00000088 + (0x10 * (n))) 69 #define MBOX3SET_CORE(n) (0x0000008C + (0x10 * (n))) 70 #define MBOX0CLR_CORE(n) (0x000000C0 + (0x10 * (n))) 71 #define MBOX1CLR_CORE(n) (0x000000C4 + (0x10 * (n))) 72 #define MBOX2CLR_CORE(n) (0x000000C8 + (0x10 * (n))) 73 #define MBOX3CLR_CORE(n) (0x000000CC + (0x10 * (n))) 74 75 static bus_space_handle_t bs_periph; 76 77 #define BSRD4(addr) \ 78 bus_space_read_4(fdtbus_bs_tag, bs_periph, (addr)) 79 #define BSWR4(addr, val) \ 80 bus_space_write_4(fdtbus_bs_tag, bs_periph, (addr), (val)) 81 82 void 83 bcm2836_mp_setmaxid(platform_t plat) 84 { 85 86 DPRINTF("platform_mp_setmaxid\n"); 87 if (mp_ncpus != 0) 88 return; 89 90 mp_ncpus = 4; 91 mp_maxid = mp_ncpus - 1; 92 DPRINTF("mp_maxid=%d\n", mp_maxid); 93 } 94 95 void 96 bcm2836_mp_start_ap(platform_t plat) 97 { 98 uint32_t val; 99 int i, retry; 100 101 DPRINTF("platform_mp_start_ap\n"); 102 103 /* initialize */ 104 if (bus_space_map(fdtbus_bs_tag, ARM_LOCAL_BASE, ARM_LOCAL_SIZE, 105 0, &bs_periph) != 0) 106 panic("can't map local peripheral\n"); 107 for (i = 0; i < mp_ncpus; i++) { 108 /* clear mailbox 0/3 */ 109 BSWR4(MBOX0CLR_CORE(i), 0xffffffff); 110 BSWR4(MBOX3CLR_CORE(i), 0xffffffff); 111 } 112 wmb(); 113 dcache_wbinv_poc_all(); 114 115 /* boot secondary CPUs */ 116 for (i = 1; i < mp_ncpus; i++) { 117 /* set entry point to mailbox 3 */ 118 BSWR4(MBOX3SET_CORE(i), 119 (uint32_t)pmap_kextract((vm_offset_t)mpentry)); 120 /* Firmware put cores in WFE state, need SEV to wake up. */ 121 dsb(); 122 sev(); 123 124 /* wait for bootup */ 125 retry = 1000; 126 do { 127 /* check entry point */ 128 val = BSRD4(MBOX3CLR_CORE(i)); 129 if (val == 0) 130 break; 131 DELAY(100); 132 retry--; 133 if (retry <= 0) { 134 printf("can't start for CPU%d\n", i); 135 break; 136 } 137 } while (1); 138 139 /* dsb and sev */ 140 dsb(); 141 sev(); 142 143 /* recode AP in CPU map */ 144 CPU_SET(i, &all_cpus); 145 } 146 } 147