1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause 3 * 4 * Copyright (c) 2019 Kyle Evans <kevans@FreeBSD.org> 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 16 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 17 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 18 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 19 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 20 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 21 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 22 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 23 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 24 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 25 * SUCH DAMAGE. 26 * 27 * $FreeBSD$ 28 */ 29 30 #include <sys/cdefs.h> 31 __FBSDID("$FreeBSD$"); 32 33 /* 34 * This file contains facilities for runtime determination of address space 35 * mappings for use in DMA/mailbox interactions. This is only used for the 36 * arm64 SoC because the 32-bit SoC used the same mappings. 37 */ 38 39 #include <sys/types.h> 40 #include <sys/systm.h> 41 42 #include <dev/ofw/openfirm.h> 43 #include <dev/ofw/ofw_bus.h> 44 #include <dev/ofw/ofw_bus_subr.h> 45 46 #include <machine/bus.h> 47 48 #include <arm/broadcom/bcm2835/bcm2835_vcbus.h> 49 50 /* 51 * This structure describes mappings that need to take place when transforming 52 * ARM core addresses into vcbus addresses for use with the DMA/mailbox 53 * interfaces. Currently, we only deal with peripheral/SDRAM address spaces 54 * here. 55 * 56 * The SDRAM address space is consistently mapped starting at 0 and extends to 57 * the size of the installed SDRAM. 58 * 59 * Peripherals are mapped further up at spots that vary per-SOC. 60 */ 61 struct bcm283x_memory_mapping { 62 vm_paddr_t armc_start; 63 vm_paddr_t armc_size; 64 vm_paddr_t vcbus_start; 65 }; 66 67 static struct bcm283x_memory_mapping bcm2835_memmap[] = { 68 { 69 /* SDRAM */ 70 .armc_start = 0x00000000, 71 .armc_size = BCM2835_ARM_IO_BASE, 72 .vcbus_start = BCM2835_VCBUS_SDRAM_BASE, 73 }, 74 { 75 /* Peripherals */ 76 .armc_start = BCM2835_ARM_IO_BASE, 77 .armc_size = BCM28XX_ARM_IO_SIZE, 78 .vcbus_start = BCM2835_VCBUS_IO_BASE, 79 }, 80 { 0, 0, 0 }, 81 }; 82 83 static struct bcm283x_memory_mapping bcm2836_memmap[] = { 84 { 85 /* SDRAM */ 86 .armc_start = 0x00000000, 87 .armc_size = BCM2836_ARM_IO_BASE, 88 .vcbus_start = BCM2836_VCBUS_SDRAM_BASE, 89 }, 90 { 91 /* Peripherals */ 92 .armc_start = BCM2836_ARM_IO_BASE, 93 .armc_size = BCM28XX_ARM_IO_SIZE, 94 .vcbus_start = BCM2836_VCBUS_IO_BASE, 95 }, 96 { 0, 0, 0 }, 97 }; 98 99 static struct bcm283x_memory_mapping bcm2837_memmap[] = { 100 { 101 /* SDRAM */ 102 .armc_start = 0x00000000, 103 .armc_size = BCM2837_ARM_IO_BASE, 104 .vcbus_start = BCM2837_VCBUS_SDRAM_BASE, 105 }, 106 { 107 /* Peripherals */ 108 .armc_start = BCM2837_ARM_IO_BASE, 109 .armc_size = BCM28XX_ARM_IO_SIZE, 110 .vcbus_start = BCM2837_VCBUS_IO_BASE, 111 }, 112 { 0, 0, 0 }, 113 }; 114 115 /* 116 * The BCM2838 supports up to 4GB of SDRAM, but unfortunately we can still only 117 * map the first 1GB into the "legacy master view" (vcbus) address space. Thus, 118 * peripherals can still only access the lower end of SDRAM. For this reason, 119 * we also capture the main-peripheral busdma restriction below. 120 */ 121 static struct bcm283x_memory_mapping bcm2838_memmap[] = { 122 { 123 /* SDRAM */ 124 .armc_start = 0x00000000, 125 .armc_size = 0x40000000, 126 .vcbus_start = BCM2838_VCBUS_SDRAM_BASE, 127 }, 128 { 129 /* Main peripherals */ 130 .armc_start = BCM2838_ARM_IO_BASE, 131 .armc_size = BCM28XX_ARM_IO_SIZE, 132 .vcbus_start = BCM2838_VCBUS_IO_BASE, 133 }, 134 { 0, 0, 0 }, 135 }; 136 137 static struct bcm283x_memory_soc_cfg { 138 struct bcm283x_memory_mapping *memmap; 139 const char *soc_compat; 140 bus_addr_t busdma_lowaddr; 141 } bcm283x_memory_configs[] = { 142 /* Legacy */ 143 { 144 .memmap = bcm2835_memmap, 145 .soc_compat = "raspberrypi,model-b", 146 .busdma_lowaddr = BUS_SPACE_MAXADDR_32BIT, 147 }, 148 /* Modern */ 149 { 150 .memmap = bcm2835_memmap, 151 .soc_compat = "brcm,bcm2835", 152 .busdma_lowaddr = BUS_SPACE_MAXADDR_32BIT, 153 }, 154 /* Legacy */ 155 { 156 .memmap = bcm2836_memmap, 157 .soc_compat = "brcm,bcm2709", 158 .busdma_lowaddr = BUS_SPACE_MAXADDR_32BIT, 159 }, 160 /* Modern */ 161 { 162 .memmap = bcm2836_memmap, 163 .soc_compat = "brcm,bcm2836", 164 .busdma_lowaddr = BUS_SPACE_MAXADDR_32BIT, 165 }, 166 { 167 .memmap = bcm2837_memmap, 168 .soc_compat = "brcm,bcm2837", 169 .busdma_lowaddr = BUS_SPACE_MAXADDR_32BIT, 170 }, 171 { 172 .memmap = bcm2838_memmap, 173 .soc_compat = "brcm,bcm2711", 174 .busdma_lowaddr = BCM2838_PERIPH_MAXADDR, 175 }, 176 { 177 .memmap = bcm2838_memmap, 178 .soc_compat = "brcm,bcm2838", 179 .busdma_lowaddr = BCM2838_PERIPH_MAXADDR, 180 }, 181 }; 182 183 static struct bcm283x_memory_soc_cfg *booted_soc_memcfg; 184 185 static struct bcm283x_memory_soc_cfg * 186 bcm283x_get_current_memcfg(void) 187 { 188 phandle_t root; 189 int i; 190 191 /* We'll cache it once we decide, because it won't change per-boot. */ 192 if (booted_soc_memcfg != NULL) 193 return (booted_soc_memcfg); 194 195 KASSERT(nitems(bcm283x_memory_configs) != 0, 196 ("No SOC memory configurations enabled!")); 197 198 root = OF_finddevice("/"); 199 for (i = 0; i < nitems(bcm283x_memory_configs); ++i) { 200 booted_soc_memcfg = &bcm283x_memory_configs[i]; 201 if (bootverbose) 202 printf("Checking root against %s\n", 203 booted_soc_memcfg->soc_compat); 204 if (ofw_bus_node_is_compatible(root, 205 booted_soc_memcfg->soc_compat)) 206 return (booted_soc_memcfg); 207 } 208 209 /* 210 * The kernel doesn't fit the board; we can't really make a reasonable 211 * guess, as these SOC are different enough that something will blow up 212 * later. 213 */ 214 panic("No suitable SOC memory configuration found."); 215 } 216 217 #define BCM283X_MEMMAP_ISTERM(ent) \ 218 ((ent)->armc_start == 0 && (ent)->armc_size == 0 && \ 219 (ent)->vcbus_start == 0) 220 221 vm_paddr_t 222 bcm283x_armc_to_vcbus(vm_paddr_t pa) 223 { 224 struct bcm283x_memory_soc_cfg *cfg; 225 struct bcm283x_memory_mapping *map, *ment; 226 227 /* Guaranteed not NULL if we haven't panicked yet. */ 228 cfg = bcm283x_get_current_memcfg(); 229 map = cfg->memmap; 230 for (ment = map; !BCM283X_MEMMAP_ISTERM(ment); ++ment) { 231 if (pa >= ment->armc_start && 232 pa < ment->armc_start + ment->armc_size) { 233 return (pa - ment->armc_start) + ment->vcbus_start; 234 } 235 } 236 237 /* 238 * Assume 1:1 mapping for anything else, but complain about it on 239 * verbose boots. 240 */ 241 if (bootverbose) 242 printf("bcm283x_vcbus: No armc -> vcbus mapping found: %jx\n", 243 (uintmax_t)pa); 244 return (pa); 245 } 246 247 vm_paddr_t 248 bcm283x_vcbus_to_armc(vm_paddr_t vca) 249 { 250 struct bcm283x_memory_soc_cfg *cfg; 251 struct bcm283x_memory_mapping *map, *ment; 252 253 /* Guaranteed not NULL if we haven't panicked yet. */ 254 cfg = bcm283x_get_current_memcfg(); 255 map = cfg->memmap; 256 for (ment = map; !BCM283X_MEMMAP_ISTERM(ment); ++ment) { 257 if (vca >= ment->vcbus_start && 258 vca < ment->vcbus_start + ment->armc_size) { 259 return (vca - ment->vcbus_start) + ment->armc_start; 260 } 261 } 262 263 /* 264 * Assume 1:1 mapping for anything else, but complain about it on 265 * verbose boots. 266 */ 267 if (bootverbose) 268 printf("bcm283x_vcbus: No vcbus -> armc mapping found: %jx\n", 269 (uintmax_t)vca); 270 return (vca); 271 } 272 273 bus_addr_t 274 bcm283x_dmabus_peripheral_lowaddr(void) 275 { 276 struct bcm283x_memory_soc_cfg *cfg; 277 278 cfg = bcm283x_get_current_memcfg(); 279 return (cfg->busdma_lowaddr); 280 } 281