xref: /freebsd/sys/arm/broadcom/bcm2835/bcm2835_fbd.c (revision 6d732c66bca5da4d261577aad2c8ea84519b0bea)
1 /*-
2  * Copyright (c) 2012 Oleksandr Tymoshenko <gonzo@freebsd.org>
3  * Copyright (c) 2012, 2013 The FreeBSD Foundation
4  * All rights reserved.
5  *
6  * Portions of this software were developed by Oleksandr Rybalko
7  * under sponsorship from the FreeBSD Foundation.
8  *
9  * Redistribution and use in source and binary forms, with or without
10  * modification, are permitted provided that the following conditions
11  * are met:
12  * 1. Redistributions of source code must retain the above copyright
13  *    notice, this list of conditions and the following disclaimer.
14  * 2. Redistributions in binary form must reproduce the above copyright
15  *    notice, this list of conditions and the following disclaimer in the
16  *    documentation and/or other materials provided with the distribution.
17  *
18  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
19  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
20  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
21  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
22  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
23  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
24  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
25  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
26  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
27  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
28  * SUCH DAMAGE.
29  *
30  */
31 #include <sys/cdefs.h>
32 __FBSDID("$FreeBSD$");
33 
34 #include <sys/param.h>
35 #include <sys/systm.h>
36 #include <sys/bio.h>
37 #include <sys/bus.h>
38 #include <sys/conf.h>
39 #include <sys/endian.h>
40 #include <sys/kernel.h>
41 #include <sys/kthread.h>
42 #include <sys/lock.h>
43 #include <sys/malloc.h>
44 #include <sys/module.h>
45 #include <sys/mutex.h>
46 #include <sys/queue.h>
47 #include <sys/resource.h>
48 #include <sys/rman.h>
49 #include <sys/time.h>
50 #include <sys/timetc.h>
51 #include <sys/fbio.h>
52 #include <sys/consio.h>
53 
54 #include <sys/kdb.h>
55 
56 #include <machine/bus.h>
57 #include <machine/cpu.h>
58 #include <machine/cpufunc.h>
59 #include <machine/fdt.h>
60 #include <machine/resource.h>
61 #include <machine/intr.h>
62 
63 #include <dev/fdt/fdt_common.h>
64 #include <dev/ofw/ofw_bus.h>
65 #include <dev/ofw/ofw_bus_subr.h>
66 
67 #include <dev/fb/fbreg.h>
68 #include <dev/vt/vt.h>
69 
70 #include <arm/broadcom/bcm2835/bcm2835_mbox.h>
71 #include <arm/broadcom/bcm2835/bcm2835_vcbus.h>
72 
73 #include "fb_if.h"
74 #include "mbox_if.h"
75 
76 #define FB_WIDTH		640
77 #define FB_HEIGHT		480
78 #define FB_DEPTH		24
79 
80 struct bcm_fb_config {
81 	uint32_t	xres;
82 	uint32_t	yres;
83 	uint32_t	vxres;
84 	uint32_t	vyres;
85 	uint32_t	pitch;
86 	uint32_t	bpp;
87 	uint32_t	xoffset;
88 	uint32_t	yoffset;
89 	/* Filled by videocore */
90 	uint32_t	base;
91 	uint32_t	screen_size;
92 };
93 
94 struct bcmsc_softc {
95 	device_t		dev;
96 	struct fb_info 		*info;
97 	bus_dma_tag_t		dma_tag;
98 	bus_dmamap_t		dma_map;
99 	struct bcm_fb_config*	fb_config;
100 	bus_addr_t		fb_config_phys;
101 	struct intr_config_hook	init_hook;
102 
103 };
104 
105 static int bcm_fb_probe(device_t);
106 static int bcm_fb_attach(device_t);
107 static void bcm_fb_dmamap_cb(void *arg, bus_dma_segment_t *segs, int nseg,
108     int err);
109 
110 static void
111 bcm_fb_init(void *arg)
112 {
113 	volatile struct bcm_fb_config *fb_config;
114 	struct bcmsc_softc *sc;
115 	struct fb_info *info;
116 	phandle_t node;
117 	pcell_t cell;
118 	device_t mbox;
119 	device_t fbd;
120 	int err = 0;
121 
122 	sc = arg;
123 	fb_config = sc->fb_config;
124 	node = ofw_bus_get_node(sc->dev);
125 
126 	fb_config->xres = 0;
127 	fb_config->yres = 0;
128 	fb_config->bpp = 0;
129 	fb_config->vxres = 0;
130 	fb_config->vyres = 0;
131 	fb_config->xoffset = 0;
132 	fb_config->yoffset = 0;
133 	fb_config->base = 0;
134 	fb_config->pitch = 0;
135 	fb_config->screen_size = 0;
136 
137 	if ((OF_getprop(node, "broadcom,width", &cell, sizeof(cell))) > 0)
138 		fb_config->xres = (int)fdt32_to_cpu(cell);
139 	if (fb_config->xres == 0)
140 		fb_config->xres = FB_WIDTH;
141 
142 	if ((OF_getprop(node, "broadcom,height", &cell, sizeof(cell))) > 0)
143 		fb_config->yres = (uint32_t)fdt32_to_cpu(cell);
144 	if (fb_config->yres == 0)
145 		fb_config->yres = FB_HEIGHT;
146 
147 	if ((OF_getprop(node, "broadcom,depth", &cell, sizeof(cell))) > 0)
148 		fb_config->bpp = (uint32_t)fdt32_to_cpu(cell);
149 	if (fb_config->bpp == 0)
150 		fb_config->bpp = FB_DEPTH;
151 
152 	bus_dmamap_sync(sc->dma_tag, sc->dma_map,
153 		BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD);
154 
155 	mbox = devclass_get_device(devclass_find("mbox"), 0);
156 	if (mbox) {
157 		MBOX_WRITE(mbox, BCM2835_MBOX_CHAN_FB, sc->fb_config_phys);
158 		MBOX_READ(mbox, BCM2835_MBOX_CHAN_FB, &err);
159 	}
160 	bus_dmamap_sync(sc->dma_tag, sc->dma_map,
161 		BUS_DMASYNC_POSTREAD);
162 
163 	if (fb_config->base != 0) {
164 		device_printf(sc->dev, "%dx%d(%dx%d@%d,%d) %dbpp\n",
165 			fb_config->xres, fb_config->yres,
166 			fb_config->vxres, fb_config->vyres,
167 			fb_config->xoffset, fb_config->yoffset,
168 			fb_config->bpp);
169 
170 
171 		device_printf(sc->dev, "pitch %d, base 0x%08x, screen_size %d\n",
172 			fb_config->pitch, fb_config->base,
173 			fb_config->screen_size);
174 
175 
176 
177 
178 		info = malloc(sizeof(struct fb_info), M_DEVBUF,
179 		    M_WAITOK | M_ZERO);
180 		info->fb_name = device_get_nameunit(sc->dev);
181 		info->fb_vbase = (intptr_t)pmap_mapdev(fb_config->base,
182 		    fb_config->screen_size);
183 		info->fb_pbase = fb_config->base;
184 		info->fb_size = fb_config->screen_size;
185 		info->fb_bpp = info->fb_depth = fb_config->bpp;
186 		info->fb_stride = fb_config->pitch;
187 		info->fb_width = fb_config->xres;
188 		info->fb_height = fb_config->yres;
189 
190 		sc->info = info;
191 
192 		fbd = device_add_child(sc->dev, "fbd",
193 		    device_get_unit(sc->dev));
194 		if (fbd == NULL) {
195 			device_printf(sc->dev, "Failed to add fbd child\n");
196 			return;
197 		}
198 		if (device_probe_and_attach(fbd) != 0) {
199 			device_printf(sc->dev, "Failed to attach fbd device\n");
200 			return;
201 		}
202 
203 
204 	} else {
205 		device_printf(sc->dev, "Failed to set framebuffer info\n");
206 		return;
207 	}
208 
209 	config_intrhook_disestablish(&sc->init_hook);
210 }
211 
212 static int
213 bcm_fb_probe(device_t dev)
214 {
215 	if (!ofw_bus_is_compatible(dev, "broadcom,bcm2835-fb"))
216 		return (ENXIO);
217 
218 	device_set_desc(dev, "BCM2835 VT framebuffer driver");
219 
220 	return (BUS_PROBE_DEFAULT);
221 }
222 
223 static int
224 bcm_fb_attach(device_t dev)
225 {
226 	struct bcmsc_softc *sc = device_get_softc(dev);
227 	int dma_size = sizeof(struct bcm_fb_config);
228 	int err;
229 
230 	sc->dev = dev;
231 
232 	err = bus_dma_tag_create(
233 	    bus_get_dma_tag(sc->dev),
234 	    PAGE_SIZE, 0,		/* alignment, boundary */
235 	    BUS_SPACE_MAXADDR_32BIT,	/* lowaddr */
236 	    BUS_SPACE_MAXADDR,		/* highaddr */
237 	    NULL, NULL,			/* filter, filterarg */
238 	    dma_size, 1,		/* maxsize, nsegments */
239 	    dma_size, 0,		/* maxsegsize, flags */
240 	    NULL, NULL,			/* lockfunc, lockarg */
241 	    &sc->dma_tag);
242 
243 	err = bus_dmamem_alloc(sc->dma_tag, (void **)&sc->fb_config, 0,
244 	    &sc->dma_map);
245 	if (err) {
246 		device_printf(dev, "cannot allocate framebuffer\n");
247 		goto fail;
248 	}
249 
250 	err = bus_dmamap_load(sc->dma_tag, sc->dma_map, sc->fb_config,
251 	    dma_size, bcm_fb_dmamap_cb, &sc->fb_config_phys, BUS_DMA_NOWAIT);
252 
253 	if (err) {
254 		device_printf(dev, "cannot load DMA map\n");
255 		goto fail;
256 	}
257 
258 	/*
259 	 * We have to wait until interrupts are enabled.
260 	 * Mailbox relies on it to get data from VideoCore
261 	 */
262         sc->init_hook.ich_func = bcm_fb_init;
263         sc->init_hook.ich_arg = sc;
264 
265         if (config_intrhook_establish(&sc->init_hook) != 0) {
266 		device_printf(dev, "failed to establish intrhook\n");
267                 return (ENOMEM);
268 	}
269 
270 	return (0);
271 
272 fail:
273 	return (ENXIO);
274 }
275 
276 
277 static void
278 bcm_fb_dmamap_cb(void *arg, bus_dma_segment_t *segs, int nseg, int err)
279 {
280 	bus_addr_t *addr;
281 
282 	if (err)
283 		return;
284 
285 	addr = (bus_addr_t*)arg;
286 	*addr = PHYS_TO_VCBUS(segs[0].ds_addr);
287 }
288 
289 static struct fb_info *
290 bcm_fb_helper_getinfo(device_t dev)
291 {
292 	struct bcmsc_softc *sc;
293 
294 	sc = device_get_softc(dev);
295 
296 	return (sc->info);
297 }
298 
299 static device_method_t bcm_fb_methods[] = {
300 	/* Device interface */
301 	DEVMETHOD(device_probe,		bcm_fb_probe),
302 	DEVMETHOD(device_attach,	bcm_fb_attach),
303 
304 	/* Framebuffer service methods */
305 	DEVMETHOD(fb_getinfo,		bcm_fb_helper_getinfo),
306 
307 	DEVMETHOD_END
308 };
309 
310 static devclass_t bcm_fb_devclass;
311 
312 static driver_t bcm_fb_driver = {
313 	"fb",
314 	bcm_fb_methods,
315 	sizeof(struct bcmsc_softc),
316 };
317 
318 DRIVER_MODULE(bcm2835fb, nexus, bcm_fb_driver, bcm_fb_devclass, 0, 0);
319