1 /*- 2 * Copyright (C) 2013-2015 Daisuke Aoyama <aoyama@peach.ne.jp> 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 15 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 16 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 17 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 18 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 19 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 20 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 21 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 22 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 23 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 24 * SUCH DAMAGE. 25 * 26 */ 27 28 #include <sys/cdefs.h> 29 __FBSDID("$FreeBSD$"); 30 31 #include <sys/param.h> 32 #include <sys/systm.h> 33 #include <sys/bus.h> 34 #include <sys/cpu.h> 35 #include <sys/kernel.h> 36 #include <sys/lock.h> 37 #include <sys/malloc.h> 38 #include <sys/module.h> 39 #include <sys/mutex.h> 40 #include <sys/sema.h> 41 #include <sys/sysctl.h> 42 43 #include <machine/bus.h> 44 #include <machine/cpu.h> 45 #include <machine/intr.h> 46 47 #include <dev/ofw/ofw_bus.h> 48 #include <dev/ofw/ofw_bus_subr.h> 49 50 #include <arm/broadcom/bcm2835/bcm2835_mbox.h> 51 #include <arm/broadcom/bcm2835/bcm2835_mbox_prop.h> 52 #include <arm/broadcom/bcm2835/bcm2835_vcbus.h> 53 54 #include "cpufreq_if.h" 55 #include "mbox_if.h" 56 57 #ifdef DEBUG 58 #define DPRINTF(fmt, ...) do { \ 59 printf("%s:%u: ", __func__, __LINE__); \ 60 printf(fmt, ##__VA_ARGS__); \ 61 } while (0) 62 #else 63 #define DPRINTF(fmt, ...) 64 #endif 65 66 #define HZ2MHZ(freq) ((freq) / (1000 * 1000)) 67 #define MHZ2HZ(freq) ((freq) * (1000 * 1000)) 68 69 #ifdef SOC_BCM2836 70 #define OFFSET2MVOLT(val) (((val) / 1000)) 71 #define MVOLT2OFFSET(val) (((val) * 1000)) 72 #define DEFAULT_ARM_FREQUENCY 600 73 #define DEFAULT_LOWEST_FREQ 600 74 #else 75 #define OFFSET2MVOLT(val) (1200 + ((val) * 25)) 76 #define MVOLT2OFFSET(val) (((val) - 1200) / 25) 77 #define DEFAULT_ARM_FREQUENCY 700 78 #define DEFAULT_LOWEST_FREQ 300 79 #endif 80 #define DEFAULT_CORE_FREQUENCY 250 81 #define DEFAULT_SDRAM_FREQUENCY 400 82 #define TRANSITION_LATENCY 1000 83 #define MIN_OVER_VOLTAGE -16 84 #define MAX_OVER_VOLTAGE 6 85 #define MSG_ERROR -999999999 86 #define MHZSTEP 100 87 #define HZSTEP (MHZ2HZ(MHZSTEP)) 88 #define TZ_ZEROC 2731 89 90 #define VC_LOCK(sc) do { \ 91 sema_wait(&vc_sema); \ 92 } while (0) 93 #define VC_UNLOCK(sc) do { \ 94 sema_post(&vc_sema); \ 95 } while (0) 96 97 /* ARM->VC mailbox property semaphore */ 98 static struct sema vc_sema; 99 100 static struct sysctl_ctx_list bcm2835_sysctl_ctx; 101 102 struct bcm2835_cpufreq_softc { 103 device_t dev; 104 int arm_max_freq; 105 int arm_min_freq; 106 int core_max_freq; 107 int core_min_freq; 108 int sdram_max_freq; 109 int sdram_min_freq; 110 int max_voltage_core; 111 int min_voltage_core; 112 113 /* the values written in mbox */ 114 int voltage_core; 115 int voltage_sdram; 116 int voltage_sdram_c; 117 int voltage_sdram_i; 118 int voltage_sdram_p; 119 int turbo_mode; 120 121 /* initial hook for waiting mbox intr */ 122 struct intr_config_hook init_hook; 123 }; 124 125 static struct ofw_compat_data compat_data[] = { 126 { "broadcom,bcm2835-vc", 1 }, 127 { "broadcom,bcm2708-vc", 1 }, 128 { "brcm,bcm2709", 1 }, 129 { NULL, 0 } 130 }; 131 132 static int cpufreq_verbose = 0; 133 TUNABLE_INT("hw.bcm2835.cpufreq.verbose", &cpufreq_verbose); 134 static int cpufreq_lowest_freq = DEFAULT_LOWEST_FREQ; 135 TUNABLE_INT("hw.bcm2835.cpufreq.lowest_freq", &cpufreq_lowest_freq); 136 137 #ifdef PROP_DEBUG 138 static void 139 bcm2835_dump(const void *data, int len) 140 { 141 const uint8_t *p = (const uint8_t*)data; 142 int i; 143 144 printf("dump @ %p:\n", data); 145 for (i = 0; i < len; i++) { 146 printf("%2.2x ", p[i]); 147 if ((i % 4) == 3) 148 printf(" "); 149 if ((i % 16) == 15) 150 printf("\n"); 151 } 152 printf("\n"); 153 } 154 #endif 155 156 static int 157 bcm2835_cpufreq_get_clock_rate(struct bcm2835_cpufreq_softc *sc, 158 uint32_t clock_id) 159 { 160 struct msg_get_clock_rate msg; 161 int rate; 162 int err; 163 164 /* 165 * Get clock rate 166 * Tag: 0x00030002 167 * Request: 168 * Length: 4 169 * Value: 170 * u32: clock id 171 * Response: 172 * Length: 8 173 * Value: 174 * u32: clock id 175 * u32: rate (in Hz) 176 */ 177 178 /* setup single tag buffer */ 179 memset(&msg, 0, sizeof(msg)); 180 msg.hdr.buf_size = sizeof(msg); 181 msg.hdr.code = BCM2835_MBOX_CODE_REQ; 182 msg.tag_hdr.tag = BCM2835_MBOX_TAG_GET_CLOCK_RATE; 183 msg.tag_hdr.val_buf_size = sizeof(msg.body); 184 msg.tag_hdr.val_len = sizeof(msg.body.req); 185 msg.body.req.clock_id = clock_id; 186 msg.end_tag = 0; 187 188 /* call mailbox property */ 189 err = bcm2835_mbox_property(&msg, sizeof(msg)); 190 if (err) { 191 device_printf(sc->dev, "can't get clock rate (id=%u)\n", 192 clock_id); 193 return (MSG_ERROR); 194 } 195 196 /* result (Hz) */ 197 rate = (int)msg.body.resp.rate_hz; 198 DPRINTF("clock = %d(Hz)\n", rate); 199 return (rate); 200 } 201 202 static int 203 bcm2835_cpufreq_get_max_clock_rate(struct bcm2835_cpufreq_softc *sc, 204 uint32_t clock_id) 205 { 206 struct msg_get_max_clock_rate msg; 207 int rate; 208 int err; 209 210 /* 211 * Get max clock rate 212 * Tag: 0x00030004 213 * Request: 214 * Length: 4 215 * Value: 216 * u32: clock id 217 * Response: 218 * Length: 8 219 * Value: 220 * u32: clock id 221 * u32: rate (in Hz) 222 */ 223 224 /* setup single tag buffer */ 225 memset(&msg, 0, sizeof(msg)); 226 msg.hdr.buf_size = sizeof(msg); 227 msg.hdr.code = BCM2835_MBOX_CODE_REQ; 228 msg.tag_hdr.tag = BCM2835_MBOX_TAG_GET_MAX_CLOCK_RATE; 229 msg.tag_hdr.val_buf_size = sizeof(msg.body); 230 msg.tag_hdr.val_len = sizeof(msg.body.req); 231 msg.body.req.clock_id = clock_id; 232 msg.end_tag = 0; 233 234 /* call mailbox property */ 235 err = bcm2835_mbox_property(&msg, sizeof(msg)); 236 if (err) { 237 device_printf(sc->dev, "can't get max clock rate (id=%u)\n", 238 clock_id); 239 return (MSG_ERROR); 240 } 241 242 /* result (Hz) */ 243 rate = (int)msg.body.resp.rate_hz; 244 DPRINTF("clock = %d(Hz)\n", rate); 245 return (rate); 246 } 247 248 static int 249 bcm2835_cpufreq_get_min_clock_rate(struct bcm2835_cpufreq_softc *sc, 250 uint32_t clock_id) 251 { 252 struct msg_get_min_clock_rate msg; 253 int rate; 254 int err; 255 256 /* 257 * Get min clock rate 258 * Tag: 0x00030007 259 * Request: 260 * Length: 4 261 * Value: 262 * u32: clock id 263 * Response: 264 * Length: 8 265 * Value: 266 * u32: clock id 267 * u32: rate (in Hz) 268 */ 269 270 /* setup single tag buffer */ 271 memset(&msg, 0, sizeof(msg)); 272 msg.hdr.buf_size = sizeof(msg); 273 msg.hdr.code = BCM2835_MBOX_CODE_REQ; 274 msg.tag_hdr.tag = BCM2835_MBOX_TAG_GET_MIN_CLOCK_RATE; 275 msg.tag_hdr.val_buf_size = sizeof(msg.body); 276 msg.tag_hdr.val_len = sizeof(msg.body.req); 277 msg.body.req.clock_id = clock_id; 278 msg.end_tag = 0; 279 280 /* call mailbox property */ 281 err = bcm2835_mbox_property(&msg, sizeof(msg)); 282 if (err) { 283 device_printf(sc->dev, "can't get min clock rate (id=%u)\n", 284 clock_id); 285 return (MSG_ERROR); 286 } 287 288 /* result (Hz) */ 289 rate = (int)msg.body.resp.rate_hz; 290 DPRINTF("clock = %d(Hz)\n", rate); 291 return (rate); 292 } 293 294 static int 295 bcm2835_cpufreq_set_clock_rate(struct bcm2835_cpufreq_softc *sc, 296 uint32_t clock_id, uint32_t rate_hz) 297 { 298 struct msg_set_clock_rate msg; 299 int rate; 300 int err; 301 302 /* 303 * Set clock rate 304 * Tag: 0x00038002 305 * Request: 306 * Length: 8 307 * Value: 308 * u32: clock id 309 * u32: rate (in Hz) 310 * Response: 311 * Length: 8 312 * Value: 313 * u32: clock id 314 * u32: rate (in Hz) 315 */ 316 317 /* setup single tag buffer */ 318 memset(&msg, 0, sizeof(msg)); 319 msg.hdr.buf_size = sizeof(msg); 320 msg.hdr.code = BCM2835_MBOX_CODE_REQ; 321 msg.tag_hdr.tag = BCM2835_MBOX_TAG_SET_CLOCK_RATE; 322 msg.tag_hdr.val_buf_size = sizeof(msg.body); 323 msg.tag_hdr.val_len = sizeof(msg.body.req); 324 msg.body.req.clock_id = clock_id; 325 msg.body.req.rate_hz = rate_hz; 326 msg.end_tag = 0; 327 328 /* call mailbox property */ 329 err = bcm2835_mbox_property(&msg, sizeof(msg)); 330 if (err) { 331 device_printf(sc->dev, "can't set clock rate (id=%u)\n", 332 clock_id); 333 return (MSG_ERROR); 334 } 335 336 /* workaround for core clock */ 337 if (clock_id == BCM2835_MBOX_CLOCK_ID_CORE) { 338 /* for safety (may change voltage without changing clock) */ 339 DELAY(TRANSITION_LATENCY); 340 341 /* 342 * XXX: the core clock is unable to change at once, 343 * to change certainly, write it twice now. 344 */ 345 346 /* setup single tag buffer */ 347 memset(&msg, 0, sizeof(msg)); 348 msg.hdr.buf_size = sizeof(msg); 349 msg.hdr.code = BCM2835_MBOX_CODE_REQ; 350 msg.tag_hdr.tag = BCM2835_MBOX_TAG_SET_CLOCK_RATE; 351 msg.tag_hdr.val_buf_size = sizeof(msg.body); 352 msg.tag_hdr.val_len = sizeof(msg.body.req); 353 msg.body.req.clock_id = clock_id; 354 msg.body.req.rate_hz = rate_hz; 355 msg.end_tag = 0; 356 357 /* call mailbox property */ 358 err = bcm2835_mbox_property(&msg, sizeof(msg)); 359 if (err) { 360 device_printf(sc->dev, 361 "can't set clock rate (id=%u)\n", clock_id); 362 return (MSG_ERROR); 363 } 364 } 365 366 /* result (Hz) */ 367 rate = (int)msg.body.resp.rate_hz; 368 DPRINTF("clock = %d(Hz)\n", rate); 369 return (rate); 370 } 371 372 static int 373 bcm2835_cpufreq_get_turbo(struct bcm2835_cpufreq_softc *sc) 374 { 375 struct msg_get_turbo msg; 376 int level; 377 int err; 378 379 /* 380 * Get turbo 381 * Tag: 0x00030009 382 * Request: 383 * Length: 4 384 * Value: 385 * u32: id 386 * Response: 387 * Length: 8 388 * Value: 389 * u32: id 390 * u32: level 391 */ 392 393 /* setup single tag buffer */ 394 memset(&msg, 0, sizeof(msg)); 395 msg.hdr.buf_size = sizeof(msg); 396 msg.hdr.code = BCM2835_MBOX_CODE_REQ; 397 msg.tag_hdr.tag = BCM2835_MBOX_TAG_GET_TURBO; 398 msg.tag_hdr.val_buf_size = sizeof(msg.body); 399 msg.tag_hdr.val_len = sizeof(msg.body.req); 400 msg.body.req.id = 0; 401 msg.end_tag = 0; 402 403 /* call mailbox property */ 404 err = bcm2835_mbox_property(&msg, sizeof(msg)); 405 if (err) { 406 device_printf(sc->dev, "can't get turbo\n"); 407 return (MSG_ERROR); 408 } 409 410 /* result 0=non-turbo, 1=turbo */ 411 level = (int)msg.body.resp.level; 412 DPRINTF("level = %d\n", level); 413 return (level); 414 } 415 416 static int 417 bcm2835_cpufreq_set_turbo(struct bcm2835_cpufreq_softc *sc, uint32_t level) 418 { 419 struct msg_set_turbo msg; 420 int value; 421 int err; 422 423 /* 424 * Set turbo 425 * Tag: 0x00038009 426 * Request: 427 * Length: 8 428 * Value: 429 * u32: id 430 * u32: level 431 * Response: 432 * Length: 8 433 * Value: 434 * u32: id 435 * u32: level 436 */ 437 438 /* replace unknown value to OFF */ 439 if (level != BCM2835_MBOX_TURBO_ON && level != BCM2835_MBOX_TURBO_OFF) 440 level = BCM2835_MBOX_TURBO_OFF; 441 442 /* setup single tag buffer */ 443 memset(&msg, 0, sizeof(msg)); 444 msg.hdr.buf_size = sizeof(msg); 445 msg.hdr.code = BCM2835_MBOX_CODE_REQ; 446 msg.tag_hdr.tag = BCM2835_MBOX_TAG_SET_TURBO; 447 msg.tag_hdr.val_buf_size = sizeof(msg.body); 448 msg.tag_hdr.val_len = sizeof(msg.body.req); 449 msg.body.req.id = 0; 450 msg.body.req.level = level; 451 msg.end_tag = 0; 452 453 /* call mailbox property */ 454 err = bcm2835_mbox_property(&msg, sizeof(msg)); 455 if (err) { 456 device_printf(sc->dev, "can't set turbo\n"); 457 return (MSG_ERROR); 458 } 459 460 /* result 0=non-turbo, 1=turbo */ 461 value = (int)msg.body.resp.level; 462 DPRINTF("level = %d\n", value); 463 return (value); 464 } 465 466 static int 467 bcm2835_cpufreq_get_voltage(struct bcm2835_cpufreq_softc *sc, 468 uint32_t voltage_id) 469 { 470 struct msg_get_voltage msg; 471 int value; 472 int err; 473 474 /* 475 * Get voltage 476 * Tag: 0x00030003 477 * Request: 478 * Length: 4 479 * Value: 480 * u32: voltage id 481 * Response: 482 * Length: 8 483 * Value: 484 * u32: voltage id 485 * u32: value (offset from 1.2V in units of 0.025V) 486 */ 487 488 /* setup single tag buffer */ 489 memset(&msg, 0, sizeof(msg)); 490 msg.hdr.buf_size = sizeof(msg); 491 msg.hdr.code = BCM2835_MBOX_CODE_REQ; 492 msg.tag_hdr.tag = BCM2835_MBOX_TAG_GET_VOLTAGE; 493 msg.tag_hdr.val_buf_size = sizeof(msg.body); 494 msg.tag_hdr.val_len = sizeof(msg.body.req); 495 msg.body.req.voltage_id = voltage_id; 496 msg.end_tag = 0; 497 498 /* call mailbox property */ 499 err = bcm2835_mbox_property(&msg, sizeof(msg)); 500 if (err) { 501 device_printf(sc->dev, "can't get voltage\n"); 502 return (MSG_ERROR); 503 } 504 505 /* result (offset from 1.2V) */ 506 value = (int)msg.body.resp.value; 507 DPRINTF("value = %d\n", value); 508 return (value); 509 } 510 511 static int 512 bcm2835_cpufreq_get_max_voltage(struct bcm2835_cpufreq_softc *sc, 513 uint32_t voltage_id) 514 { 515 struct msg_get_max_voltage msg; 516 int value; 517 int err; 518 519 /* 520 * Get voltage 521 * Tag: 0x00030005 522 * Request: 523 * Length: 4 524 * Value: 525 * u32: voltage id 526 * Response: 527 * Length: 8 528 * Value: 529 * u32: voltage id 530 * u32: value (offset from 1.2V in units of 0.025V) 531 */ 532 533 /* setup single tag buffer */ 534 memset(&msg, 0, sizeof(msg)); 535 msg.hdr.buf_size = sizeof(msg); 536 msg.hdr.code = BCM2835_MBOX_CODE_REQ; 537 msg.tag_hdr.tag = BCM2835_MBOX_TAG_GET_MAX_VOLTAGE; 538 msg.tag_hdr.val_buf_size = sizeof(msg.body); 539 msg.tag_hdr.val_len = sizeof(msg.body.req); 540 msg.body.req.voltage_id = voltage_id; 541 msg.end_tag = 0; 542 543 /* call mailbox property */ 544 err = bcm2835_mbox_property(&msg, sizeof(msg)); 545 if (err) { 546 device_printf(sc->dev, "can't get max voltage\n"); 547 return (MSG_ERROR); 548 } 549 550 /* result (offset from 1.2V) */ 551 value = (int)msg.body.resp.value; 552 DPRINTF("value = %d\n", value); 553 return (value); 554 } 555 static int 556 bcm2835_cpufreq_get_min_voltage(struct bcm2835_cpufreq_softc *sc, 557 uint32_t voltage_id) 558 { 559 struct msg_get_min_voltage msg; 560 int value; 561 int err; 562 563 /* 564 * Get voltage 565 * Tag: 0x00030008 566 * Request: 567 * Length: 4 568 * Value: 569 * u32: voltage id 570 * Response: 571 * Length: 8 572 * Value: 573 * u32: voltage id 574 * u32: value (offset from 1.2V in units of 0.025V) 575 */ 576 577 /* setup single tag buffer */ 578 memset(&msg, 0, sizeof(msg)); 579 msg.hdr.buf_size = sizeof(msg); 580 msg.hdr.code = BCM2835_MBOX_CODE_REQ; 581 msg.tag_hdr.tag = BCM2835_MBOX_TAG_GET_MIN_VOLTAGE; 582 msg.tag_hdr.val_buf_size = sizeof(msg.body); 583 msg.tag_hdr.val_len = sizeof(msg.body.req); 584 msg.body.req.voltage_id = voltage_id; 585 msg.end_tag = 0; 586 587 /* call mailbox property */ 588 err = bcm2835_mbox_property(&msg, sizeof(msg)); 589 if (err) { 590 device_printf(sc->dev, "can't get min voltage\n"); 591 return (MSG_ERROR); 592 } 593 594 /* result (offset from 1.2V) */ 595 value = (int)msg.body.resp.value; 596 DPRINTF("value = %d\n", value); 597 return (value); 598 } 599 600 static int 601 bcm2835_cpufreq_set_voltage(struct bcm2835_cpufreq_softc *sc, 602 uint32_t voltage_id, int32_t value) 603 { 604 struct msg_set_voltage msg; 605 int err; 606 607 /* 608 * Set voltage 609 * Tag: 0x00038003 610 * Request: 611 * Length: 4 612 * Value: 613 * u32: voltage id 614 * u32: value (offset from 1.2V in units of 0.025V) 615 * Response: 616 * Length: 8 617 * Value: 618 * u32: voltage id 619 * u32: value (offset from 1.2V in units of 0.025V) 620 */ 621 622 /* 623 * over_voltage: 624 * 0 (1.2 V). Values above 6 are only allowed when force_turbo or 625 * current_limit_override are specified (which set the warranty bit). 626 */ 627 if (value > MAX_OVER_VOLTAGE || value < MIN_OVER_VOLTAGE) { 628 /* currently not supported */ 629 device_printf(sc->dev, "not supported voltage: %d\n", value); 630 return (MSG_ERROR); 631 } 632 633 /* setup single tag buffer */ 634 memset(&msg, 0, sizeof(msg)); 635 msg.hdr.buf_size = sizeof(msg); 636 msg.hdr.code = BCM2835_MBOX_CODE_REQ; 637 msg.tag_hdr.tag = BCM2835_MBOX_TAG_SET_VOLTAGE; 638 msg.tag_hdr.val_buf_size = sizeof(msg.body); 639 msg.tag_hdr.val_len = sizeof(msg.body.req); 640 msg.body.req.voltage_id = voltage_id; 641 msg.body.req.value = (uint32_t)value; 642 msg.end_tag = 0; 643 644 /* call mailbox property */ 645 err = bcm2835_mbox_property(&msg, sizeof(msg)); 646 if (err) { 647 device_printf(sc->dev, "can't set voltage\n"); 648 return (MSG_ERROR); 649 } 650 651 /* result (offset from 1.2V) */ 652 value = (int)msg.body.resp.value; 653 DPRINTF("value = %d\n", value); 654 return (value); 655 } 656 657 static int 658 bcm2835_cpufreq_get_temperature(struct bcm2835_cpufreq_softc *sc) 659 { 660 struct msg_get_temperature msg; 661 int value; 662 int err; 663 664 /* 665 * Get temperature 666 * Tag: 0x00030006 667 * Request: 668 * Length: 4 669 * Value: 670 * u32: temperature id 671 * Response: 672 * Length: 8 673 * Value: 674 * u32: temperature id 675 * u32: value 676 */ 677 678 /* setup single tag buffer */ 679 memset(&msg, 0, sizeof(msg)); 680 msg.hdr.buf_size = sizeof(msg); 681 msg.hdr.code = BCM2835_MBOX_CODE_REQ; 682 msg.tag_hdr.tag = BCM2835_MBOX_TAG_GET_TEMPERATURE; 683 msg.tag_hdr.val_buf_size = sizeof(msg.body); 684 msg.tag_hdr.val_len = sizeof(msg.body.req); 685 msg.body.req.temperature_id = 0; 686 msg.end_tag = 0; 687 688 /* call mailbox property */ 689 err = bcm2835_mbox_property(&msg, sizeof(msg)); 690 if (err) { 691 device_printf(sc->dev, "can't get temperature\n"); 692 return (MSG_ERROR); 693 } 694 695 /* result (temperature of degree C) */ 696 value = (int)msg.body.resp.value; 697 DPRINTF("value = %d\n", value); 698 return (value); 699 } 700 701 702 703 static int 704 sysctl_bcm2835_cpufreq_arm_freq(SYSCTL_HANDLER_ARGS) 705 { 706 struct bcm2835_cpufreq_softc *sc = arg1; 707 int val; 708 int err; 709 710 /* get realtime value */ 711 VC_LOCK(sc); 712 val = bcm2835_cpufreq_get_clock_rate(sc, BCM2835_MBOX_CLOCK_ID_ARM); 713 VC_UNLOCK(sc); 714 if (val == MSG_ERROR) 715 return (EIO); 716 717 err = sysctl_handle_int(oidp, &val, 0, req); 718 if (err || !req->newptr) /* error || read request */ 719 return (err); 720 721 /* write request */ 722 VC_LOCK(sc); 723 err = bcm2835_cpufreq_set_clock_rate(sc, BCM2835_MBOX_CLOCK_ID_ARM, 724 val); 725 VC_UNLOCK(sc); 726 if (err == MSG_ERROR) { 727 device_printf(sc->dev, "set clock arm_freq error\n"); 728 return (EIO); 729 } 730 DELAY(TRANSITION_LATENCY); 731 732 return (0); 733 } 734 735 static int 736 sysctl_bcm2835_cpufreq_core_freq(SYSCTL_HANDLER_ARGS) 737 { 738 struct bcm2835_cpufreq_softc *sc = arg1; 739 int val; 740 int err; 741 742 /* get realtime value */ 743 VC_LOCK(sc); 744 val = bcm2835_cpufreq_get_clock_rate(sc, BCM2835_MBOX_CLOCK_ID_CORE); 745 VC_UNLOCK(sc); 746 if (val == MSG_ERROR) 747 return (EIO); 748 749 err = sysctl_handle_int(oidp, &val, 0, req); 750 if (err || !req->newptr) /* error || read request */ 751 return (err); 752 753 /* write request */ 754 VC_LOCK(sc); 755 err = bcm2835_cpufreq_set_clock_rate(sc, BCM2835_MBOX_CLOCK_ID_CORE, 756 val); 757 if (err == MSG_ERROR) { 758 VC_UNLOCK(sc); 759 device_printf(sc->dev, "set clock core_freq error\n"); 760 return (EIO); 761 } 762 VC_UNLOCK(sc); 763 DELAY(TRANSITION_LATENCY); 764 765 return (0); 766 } 767 768 static int 769 sysctl_bcm2835_cpufreq_sdram_freq(SYSCTL_HANDLER_ARGS) 770 { 771 struct bcm2835_cpufreq_softc *sc = arg1; 772 int val; 773 int err; 774 775 /* get realtime value */ 776 VC_LOCK(sc); 777 val = bcm2835_cpufreq_get_clock_rate(sc, BCM2835_MBOX_CLOCK_ID_SDRAM); 778 VC_UNLOCK(sc); 779 if (val == MSG_ERROR) 780 return (EIO); 781 782 err = sysctl_handle_int(oidp, &val, 0, req); 783 if (err || !req->newptr) /* error || read request */ 784 return (err); 785 786 /* write request */ 787 VC_LOCK(sc); 788 err = bcm2835_cpufreq_set_clock_rate(sc, BCM2835_MBOX_CLOCK_ID_SDRAM, 789 val); 790 VC_UNLOCK(sc); 791 if (err == MSG_ERROR) { 792 device_printf(sc->dev, "set clock sdram_freq error\n"); 793 return (EIO); 794 } 795 DELAY(TRANSITION_LATENCY); 796 797 return (0); 798 } 799 800 static int 801 sysctl_bcm2835_cpufreq_turbo(SYSCTL_HANDLER_ARGS) 802 { 803 struct bcm2835_cpufreq_softc *sc = arg1; 804 int val; 805 int err; 806 807 /* get realtime value */ 808 VC_LOCK(sc); 809 val = bcm2835_cpufreq_get_turbo(sc); 810 VC_UNLOCK(sc); 811 if (val == MSG_ERROR) 812 return (EIO); 813 814 err = sysctl_handle_int(oidp, &val, 0, req); 815 if (err || !req->newptr) /* error || read request */ 816 return (err); 817 818 /* write request */ 819 if (val > 0) 820 sc->turbo_mode = BCM2835_MBOX_TURBO_ON; 821 else 822 sc->turbo_mode = BCM2835_MBOX_TURBO_OFF; 823 824 VC_LOCK(sc); 825 err = bcm2835_cpufreq_set_turbo(sc, sc->turbo_mode); 826 VC_UNLOCK(sc); 827 if (err == MSG_ERROR) { 828 device_printf(sc->dev, "set turbo error\n"); 829 return (EIO); 830 } 831 DELAY(TRANSITION_LATENCY); 832 833 return (0); 834 } 835 836 static int 837 sysctl_bcm2835_cpufreq_voltage_core(SYSCTL_HANDLER_ARGS) 838 { 839 struct bcm2835_cpufreq_softc *sc = arg1; 840 int val; 841 int err; 842 843 /* get realtime value */ 844 VC_LOCK(sc); 845 val = bcm2835_cpufreq_get_voltage(sc, BCM2835_MBOX_VOLTAGE_ID_CORE); 846 VC_UNLOCK(sc); 847 if (val == MSG_ERROR) 848 return (EIO); 849 850 err = sysctl_handle_int(oidp, &val, 0, req); 851 if (err || !req->newptr) /* error || read request */ 852 return (err); 853 854 /* write request */ 855 if (val > MAX_OVER_VOLTAGE || val < MIN_OVER_VOLTAGE) 856 return (EINVAL); 857 sc->voltage_core = val; 858 859 VC_LOCK(sc); 860 err = bcm2835_cpufreq_set_voltage(sc, BCM2835_MBOX_VOLTAGE_ID_CORE, 861 sc->voltage_core); 862 VC_UNLOCK(sc); 863 if (err == MSG_ERROR) { 864 device_printf(sc->dev, "set voltage core error\n"); 865 return (EIO); 866 } 867 DELAY(TRANSITION_LATENCY); 868 869 return (0); 870 } 871 872 static int 873 sysctl_bcm2835_cpufreq_voltage_sdram_c(SYSCTL_HANDLER_ARGS) 874 { 875 struct bcm2835_cpufreq_softc *sc = arg1; 876 int val; 877 int err; 878 879 /* get realtime value */ 880 VC_LOCK(sc); 881 val = bcm2835_cpufreq_get_voltage(sc, BCM2835_MBOX_VOLTAGE_ID_SDRAM_C); 882 VC_UNLOCK(sc); 883 if (val == MSG_ERROR) 884 return (EIO); 885 886 err = sysctl_handle_int(oidp, &val, 0, req); 887 if (err || !req->newptr) /* error || read request */ 888 return (err); 889 890 /* write request */ 891 if (val > MAX_OVER_VOLTAGE || val < MIN_OVER_VOLTAGE) 892 return (EINVAL); 893 sc->voltage_sdram_c = val; 894 895 VC_LOCK(sc); 896 err = bcm2835_cpufreq_set_voltage(sc, BCM2835_MBOX_VOLTAGE_ID_SDRAM_C, 897 sc->voltage_sdram_c); 898 VC_UNLOCK(sc); 899 if (err == MSG_ERROR) { 900 device_printf(sc->dev, "set voltage sdram_c error\n"); 901 return (EIO); 902 } 903 DELAY(TRANSITION_LATENCY); 904 905 return (0); 906 } 907 908 static int 909 sysctl_bcm2835_cpufreq_voltage_sdram_i(SYSCTL_HANDLER_ARGS) 910 { 911 struct bcm2835_cpufreq_softc *sc = arg1; 912 int val; 913 int err; 914 915 /* get realtime value */ 916 VC_LOCK(sc); 917 val = bcm2835_cpufreq_get_voltage(sc, BCM2835_MBOX_VOLTAGE_ID_SDRAM_I); 918 VC_UNLOCK(sc); 919 if (val == MSG_ERROR) 920 return (EIO); 921 922 err = sysctl_handle_int(oidp, &val, 0, req); 923 if (err || !req->newptr) /* error || read request */ 924 return (err); 925 926 /* write request */ 927 if (val > MAX_OVER_VOLTAGE || val < MIN_OVER_VOLTAGE) 928 return (EINVAL); 929 sc->voltage_sdram_i = val; 930 931 VC_LOCK(sc); 932 err = bcm2835_cpufreq_set_voltage(sc, BCM2835_MBOX_VOLTAGE_ID_SDRAM_I, 933 sc->voltage_sdram_i); 934 VC_UNLOCK(sc); 935 if (err == MSG_ERROR) { 936 device_printf(sc->dev, "set voltage sdram_i error\n"); 937 return (EIO); 938 } 939 DELAY(TRANSITION_LATENCY); 940 941 return (0); 942 } 943 944 static int 945 sysctl_bcm2835_cpufreq_voltage_sdram_p(SYSCTL_HANDLER_ARGS) 946 { 947 struct bcm2835_cpufreq_softc *sc = arg1; 948 int val; 949 int err; 950 951 /* get realtime value */ 952 VC_LOCK(sc); 953 val = bcm2835_cpufreq_get_voltage(sc, BCM2835_MBOX_VOLTAGE_ID_SDRAM_P); 954 VC_UNLOCK(sc); 955 if (val == MSG_ERROR) 956 return (EIO); 957 958 err = sysctl_handle_int(oidp, &val, 0, req); 959 if (err || !req->newptr) /* error || read request */ 960 return (err); 961 962 /* write request */ 963 if (val > MAX_OVER_VOLTAGE || val < MIN_OVER_VOLTAGE) 964 return (EINVAL); 965 sc->voltage_sdram_p = val; 966 967 VC_LOCK(sc); 968 err = bcm2835_cpufreq_set_voltage(sc, BCM2835_MBOX_VOLTAGE_ID_SDRAM_P, 969 sc->voltage_sdram_p); 970 VC_UNLOCK(sc); 971 if (err == MSG_ERROR) { 972 device_printf(sc->dev, "set voltage sdram_p error\n"); 973 return (EIO); 974 } 975 DELAY(TRANSITION_LATENCY); 976 977 return (0); 978 } 979 980 static int 981 sysctl_bcm2835_cpufreq_voltage_sdram(SYSCTL_HANDLER_ARGS) 982 { 983 struct bcm2835_cpufreq_softc *sc = arg1; 984 int val; 985 int err; 986 987 /* multiple write only */ 988 if (!req->newptr) 989 return (EINVAL); 990 val = 0; 991 err = sysctl_handle_int(oidp, &val, 0, req); 992 if (err) 993 return (err); 994 995 /* write request */ 996 if (val > MAX_OVER_VOLTAGE || val < MIN_OVER_VOLTAGE) 997 return (EINVAL); 998 sc->voltage_sdram = val; 999 1000 VC_LOCK(sc); 1001 err = bcm2835_cpufreq_set_voltage(sc, BCM2835_MBOX_VOLTAGE_ID_SDRAM_C, 1002 val); 1003 if (err == MSG_ERROR) { 1004 VC_UNLOCK(sc); 1005 device_printf(sc->dev, "set voltage sdram_c error\n"); 1006 return (EIO); 1007 } 1008 err = bcm2835_cpufreq_set_voltage(sc, BCM2835_MBOX_VOLTAGE_ID_SDRAM_I, 1009 val); 1010 if (err == MSG_ERROR) { 1011 VC_UNLOCK(sc); 1012 device_printf(sc->dev, "set voltage sdram_i error\n"); 1013 return (EIO); 1014 } 1015 err = bcm2835_cpufreq_set_voltage(sc, BCM2835_MBOX_VOLTAGE_ID_SDRAM_P, 1016 val); 1017 if (err == MSG_ERROR) { 1018 VC_UNLOCK(sc); 1019 device_printf(sc->dev, "set voltage sdram_p error\n"); 1020 return (EIO); 1021 } 1022 VC_UNLOCK(sc); 1023 DELAY(TRANSITION_LATENCY); 1024 1025 return (0); 1026 } 1027 1028 static int 1029 sysctl_bcm2835_cpufreq_temperature(SYSCTL_HANDLER_ARGS) 1030 { 1031 struct bcm2835_cpufreq_softc *sc = arg1; 1032 int val; 1033 int err; 1034 1035 /* get realtime value */ 1036 VC_LOCK(sc); 1037 val = bcm2835_cpufreq_get_temperature(sc); 1038 VC_UNLOCK(sc); 1039 if (val == MSG_ERROR) 1040 return (EIO); 1041 1042 err = sysctl_handle_int(oidp, &val, 0, req); 1043 if (err || !req->newptr) /* error || read request */ 1044 return (err); 1045 1046 /* write request */ 1047 return (EINVAL); 1048 } 1049 1050 static int 1051 sysctl_bcm2835_devcpu_temperature(SYSCTL_HANDLER_ARGS) 1052 { 1053 struct bcm2835_cpufreq_softc *sc = arg1; 1054 int val; 1055 int err; 1056 1057 /* get realtime value */ 1058 VC_LOCK(sc); 1059 val = bcm2835_cpufreq_get_temperature(sc); 1060 VC_UNLOCK(sc); 1061 if (val == MSG_ERROR) 1062 return (EIO); 1063 1064 /* 1/1000 celsius (raw) to 1/10 kelvin */ 1065 val = val / 100 + TZ_ZEROC; 1066 1067 err = sysctl_handle_int(oidp, &val, 0, req); 1068 if (err || !req->newptr) /* error || read request */ 1069 return (err); 1070 1071 /* write request */ 1072 return (EINVAL); 1073 } 1074 1075 1076 static void 1077 bcm2835_cpufreq_init(void *arg) 1078 { 1079 struct bcm2835_cpufreq_softc *sc = arg; 1080 struct sysctl_ctx_list *ctx; 1081 device_t cpu; 1082 int arm_freq, core_freq, sdram_freq; 1083 int arm_max_freq, arm_min_freq, core_max_freq, core_min_freq; 1084 int sdram_max_freq, sdram_min_freq; 1085 int voltage_core, voltage_sdram_c, voltage_sdram_i, voltage_sdram_p; 1086 int max_voltage_core, min_voltage_core; 1087 int max_voltage_sdram_c, min_voltage_sdram_c; 1088 int max_voltage_sdram_i, min_voltage_sdram_i; 1089 int max_voltage_sdram_p, min_voltage_sdram_p; 1090 int turbo, temperature; 1091 1092 VC_LOCK(sc); 1093 1094 /* current clock */ 1095 arm_freq = bcm2835_cpufreq_get_clock_rate(sc, 1096 BCM2835_MBOX_CLOCK_ID_ARM); 1097 core_freq = bcm2835_cpufreq_get_clock_rate(sc, 1098 BCM2835_MBOX_CLOCK_ID_CORE); 1099 sdram_freq = bcm2835_cpufreq_get_clock_rate(sc, 1100 BCM2835_MBOX_CLOCK_ID_SDRAM); 1101 1102 /* max/min clock */ 1103 arm_max_freq = bcm2835_cpufreq_get_max_clock_rate(sc, 1104 BCM2835_MBOX_CLOCK_ID_ARM); 1105 arm_min_freq = bcm2835_cpufreq_get_min_clock_rate(sc, 1106 BCM2835_MBOX_CLOCK_ID_ARM); 1107 core_max_freq = bcm2835_cpufreq_get_max_clock_rate(sc, 1108 BCM2835_MBOX_CLOCK_ID_CORE); 1109 core_min_freq = bcm2835_cpufreq_get_min_clock_rate(sc, 1110 BCM2835_MBOX_CLOCK_ID_CORE); 1111 sdram_max_freq = bcm2835_cpufreq_get_max_clock_rate(sc, 1112 BCM2835_MBOX_CLOCK_ID_SDRAM); 1113 sdram_min_freq = bcm2835_cpufreq_get_min_clock_rate(sc, 1114 BCM2835_MBOX_CLOCK_ID_SDRAM); 1115 1116 /* turbo mode */ 1117 turbo = bcm2835_cpufreq_get_turbo(sc); 1118 if (turbo > 0) 1119 sc->turbo_mode = BCM2835_MBOX_TURBO_ON; 1120 else 1121 sc->turbo_mode = BCM2835_MBOX_TURBO_OFF; 1122 1123 /* voltage */ 1124 voltage_core = bcm2835_cpufreq_get_voltage(sc, 1125 BCM2835_MBOX_VOLTAGE_ID_CORE); 1126 voltage_sdram_c = bcm2835_cpufreq_get_voltage(sc, 1127 BCM2835_MBOX_VOLTAGE_ID_SDRAM_C); 1128 voltage_sdram_i = bcm2835_cpufreq_get_voltage(sc, 1129 BCM2835_MBOX_VOLTAGE_ID_SDRAM_I); 1130 voltage_sdram_p = bcm2835_cpufreq_get_voltage(sc, 1131 BCM2835_MBOX_VOLTAGE_ID_SDRAM_P); 1132 1133 /* current values (offset from 1.2V) */ 1134 sc->voltage_core = voltage_core; 1135 sc->voltage_sdram = voltage_sdram_c; 1136 sc->voltage_sdram_c = voltage_sdram_c; 1137 sc->voltage_sdram_i = voltage_sdram_i; 1138 sc->voltage_sdram_p = voltage_sdram_p; 1139 1140 /* max/min voltage */ 1141 max_voltage_core = bcm2835_cpufreq_get_max_voltage(sc, 1142 BCM2835_MBOX_VOLTAGE_ID_CORE); 1143 min_voltage_core = bcm2835_cpufreq_get_min_voltage(sc, 1144 BCM2835_MBOX_VOLTAGE_ID_CORE); 1145 max_voltage_sdram_c = bcm2835_cpufreq_get_max_voltage(sc, 1146 BCM2835_MBOX_VOLTAGE_ID_SDRAM_C); 1147 max_voltage_sdram_i = bcm2835_cpufreq_get_max_voltage(sc, 1148 BCM2835_MBOX_VOLTAGE_ID_SDRAM_I); 1149 max_voltage_sdram_p = bcm2835_cpufreq_get_max_voltage(sc, 1150 BCM2835_MBOX_VOLTAGE_ID_SDRAM_P); 1151 min_voltage_sdram_c = bcm2835_cpufreq_get_min_voltage(sc, 1152 BCM2835_MBOX_VOLTAGE_ID_SDRAM_C); 1153 min_voltage_sdram_i = bcm2835_cpufreq_get_min_voltage(sc, 1154 BCM2835_MBOX_VOLTAGE_ID_SDRAM_I); 1155 min_voltage_sdram_p = bcm2835_cpufreq_get_min_voltage(sc, 1156 BCM2835_MBOX_VOLTAGE_ID_SDRAM_P); 1157 1158 /* temperature */ 1159 temperature = bcm2835_cpufreq_get_temperature(sc); 1160 1161 /* show result */ 1162 if (cpufreq_verbose || bootverbose) { 1163 device_printf(sc->dev, "Boot settings:\n"); 1164 device_printf(sc->dev, 1165 "current ARM %dMHz, Core %dMHz, SDRAM %dMHz, Turbo %s\n", 1166 HZ2MHZ(arm_freq), HZ2MHZ(core_freq), HZ2MHZ(sdram_freq), 1167 (sc->turbo_mode == BCM2835_MBOX_TURBO_ON) ? "ON" : "OFF"); 1168 1169 device_printf(sc->dev, 1170 "max/min ARM %d/%dMHz, Core %d/%dMHz, SDRAM %d/%dMHz\n", 1171 HZ2MHZ(arm_max_freq), HZ2MHZ(arm_min_freq), 1172 HZ2MHZ(core_max_freq), HZ2MHZ(core_min_freq), 1173 HZ2MHZ(sdram_max_freq), HZ2MHZ(sdram_min_freq)); 1174 1175 device_printf(sc->dev, 1176 "current Core %dmV, SDRAM_C %dmV, SDRAM_I %dmV, " 1177 "SDRAM_P %dmV\n", 1178 OFFSET2MVOLT(voltage_core), OFFSET2MVOLT(voltage_sdram_c), 1179 OFFSET2MVOLT(voltage_sdram_i), 1180 OFFSET2MVOLT(voltage_sdram_p)); 1181 1182 device_printf(sc->dev, 1183 "max/min Core %d/%dmV, SDRAM_C %d/%dmV, SDRAM_I %d/%dmV, " 1184 "SDRAM_P %d/%dmV\n", 1185 OFFSET2MVOLT(max_voltage_core), 1186 OFFSET2MVOLT(min_voltage_core), 1187 OFFSET2MVOLT(max_voltage_sdram_c), 1188 OFFSET2MVOLT(min_voltage_sdram_c), 1189 OFFSET2MVOLT(max_voltage_sdram_i), 1190 OFFSET2MVOLT(min_voltage_sdram_i), 1191 OFFSET2MVOLT(max_voltage_sdram_p), 1192 OFFSET2MVOLT(min_voltage_sdram_p)); 1193 1194 device_printf(sc->dev, 1195 "Temperature %d.%dC\n", (temperature / 1000), 1196 (temperature % 1000) / 100); 1197 } else { /* !cpufreq_verbose && !bootverbose */ 1198 device_printf(sc->dev, 1199 "ARM %dMHz, Core %dMHz, SDRAM %dMHz, Turbo %s\n", 1200 HZ2MHZ(arm_freq), HZ2MHZ(core_freq), HZ2MHZ(sdram_freq), 1201 (sc->turbo_mode == BCM2835_MBOX_TURBO_ON) ? "ON" : "OFF"); 1202 } 1203 1204 /* keep in softc (MHz/mV) */ 1205 sc->arm_max_freq = HZ2MHZ(arm_max_freq); 1206 sc->arm_min_freq = HZ2MHZ(arm_min_freq); 1207 sc->core_max_freq = HZ2MHZ(core_max_freq); 1208 sc->core_min_freq = HZ2MHZ(core_min_freq); 1209 sc->sdram_max_freq = HZ2MHZ(sdram_max_freq); 1210 sc->sdram_min_freq = HZ2MHZ(sdram_min_freq); 1211 sc->max_voltage_core = OFFSET2MVOLT(max_voltage_core); 1212 sc->min_voltage_core = OFFSET2MVOLT(min_voltage_core); 1213 1214 /* if turbo is on, set to max values */ 1215 if (sc->turbo_mode == BCM2835_MBOX_TURBO_ON) { 1216 bcm2835_cpufreq_set_clock_rate(sc, BCM2835_MBOX_CLOCK_ID_ARM, 1217 arm_max_freq); 1218 DELAY(TRANSITION_LATENCY); 1219 bcm2835_cpufreq_set_clock_rate(sc, BCM2835_MBOX_CLOCK_ID_CORE, 1220 core_max_freq); 1221 DELAY(TRANSITION_LATENCY); 1222 bcm2835_cpufreq_set_clock_rate(sc, 1223 BCM2835_MBOX_CLOCK_ID_SDRAM, sdram_max_freq); 1224 DELAY(TRANSITION_LATENCY); 1225 } else { 1226 bcm2835_cpufreq_set_clock_rate(sc, BCM2835_MBOX_CLOCK_ID_ARM, 1227 arm_min_freq); 1228 DELAY(TRANSITION_LATENCY); 1229 bcm2835_cpufreq_set_clock_rate(sc, BCM2835_MBOX_CLOCK_ID_CORE, 1230 core_min_freq); 1231 DELAY(TRANSITION_LATENCY); 1232 bcm2835_cpufreq_set_clock_rate(sc, 1233 BCM2835_MBOX_CLOCK_ID_SDRAM, sdram_min_freq); 1234 DELAY(TRANSITION_LATENCY); 1235 } 1236 1237 VC_UNLOCK(sc); 1238 1239 /* add human readable temperature to dev.cpu node */ 1240 cpu = device_get_parent(sc->dev); 1241 if (cpu != NULL) { 1242 ctx = device_get_sysctl_ctx(cpu); 1243 SYSCTL_ADD_PROC(ctx, 1244 SYSCTL_CHILDREN(device_get_sysctl_tree(cpu)), OID_AUTO, 1245 "temperature", CTLTYPE_INT | CTLFLAG_RD, sc, 0, 1246 sysctl_bcm2835_devcpu_temperature, "IK", 1247 "Current SoC temperature"); 1248 } 1249 1250 /* release this hook (continue boot) */ 1251 config_intrhook_disestablish(&sc->init_hook); 1252 } 1253 1254 static void 1255 bcm2835_cpufreq_identify(driver_t *driver, device_t parent) 1256 { 1257 const struct ofw_compat_data *compat; 1258 phandle_t root; 1259 1260 root = OF_finddevice("/"); 1261 for (compat = compat_data; compat->ocd_str != NULL; compat++) 1262 if (ofw_bus_node_is_compatible(root, compat->ocd_str)) 1263 break; 1264 1265 if (compat->ocd_data == 0) 1266 return; 1267 1268 DPRINTF("driver=%p, parent=%p\n", driver, parent); 1269 if (device_find_child(parent, "bcm2835_cpufreq", -1) != NULL) 1270 return; 1271 if (BUS_ADD_CHILD(parent, 0, "bcm2835_cpufreq", -1) == NULL) 1272 device_printf(parent, "add child failed\n"); 1273 } 1274 1275 static int 1276 bcm2835_cpufreq_probe(device_t dev) 1277 { 1278 1279 if (device_get_unit(dev) != 0) 1280 return (ENXIO); 1281 device_set_desc(dev, "CPU Frequency Control"); 1282 1283 return (0); 1284 } 1285 1286 static int 1287 bcm2835_cpufreq_attach(device_t dev) 1288 { 1289 struct bcm2835_cpufreq_softc *sc; 1290 struct sysctl_oid *oid; 1291 1292 /* set self dev */ 1293 sc = device_get_softc(dev); 1294 sc->dev = dev; 1295 1296 /* initial values */ 1297 sc->arm_max_freq = -1; 1298 sc->arm_min_freq = -1; 1299 sc->core_max_freq = -1; 1300 sc->core_min_freq = -1; 1301 sc->sdram_max_freq = -1; 1302 sc->sdram_min_freq = -1; 1303 sc->max_voltage_core = 0; 1304 sc->min_voltage_core = 0; 1305 1306 /* setup sysctl at first device */ 1307 if (device_get_unit(dev) == 0) { 1308 sysctl_ctx_init(&bcm2835_sysctl_ctx); 1309 /* create node for hw.cpufreq */ 1310 oid = SYSCTL_ADD_NODE(&bcm2835_sysctl_ctx, 1311 SYSCTL_STATIC_CHILDREN(_hw), OID_AUTO, "cpufreq", 1312 CTLFLAG_RD, NULL, ""); 1313 1314 /* Frequency (Hz) */ 1315 SYSCTL_ADD_PROC(&bcm2835_sysctl_ctx, SYSCTL_CHILDREN(oid), 1316 OID_AUTO, "arm_freq", CTLTYPE_INT | CTLFLAG_RW, sc, 0, 1317 sysctl_bcm2835_cpufreq_arm_freq, "IU", 1318 "ARM frequency (Hz)"); 1319 SYSCTL_ADD_PROC(&bcm2835_sysctl_ctx, SYSCTL_CHILDREN(oid), 1320 OID_AUTO, "core_freq", CTLTYPE_INT | CTLFLAG_RW, sc, 0, 1321 sysctl_bcm2835_cpufreq_core_freq, "IU", 1322 "Core frequency (Hz)"); 1323 SYSCTL_ADD_PROC(&bcm2835_sysctl_ctx, SYSCTL_CHILDREN(oid), 1324 OID_AUTO, "sdram_freq", CTLTYPE_INT | CTLFLAG_RW, sc, 0, 1325 sysctl_bcm2835_cpufreq_sdram_freq, "IU", 1326 "SDRAM frequency (Hz)"); 1327 1328 /* Turbo state */ 1329 SYSCTL_ADD_PROC(&bcm2835_sysctl_ctx, SYSCTL_CHILDREN(oid), 1330 OID_AUTO, "turbo", CTLTYPE_INT | CTLFLAG_RW, sc, 0, 1331 sysctl_bcm2835_cpufreq_turbo, "IU", 1332 "Disables dynamic clocking"); 1333 1334 /* Voltage (offset from 1.2V in units of 0.025V) */ 1335 SYSCTL_ADD_PROC(&bcm2835_sysctl_ctx, SYSCTL_CHILDREN(oid), 1336 OID_AUTO, "voltage_core", CTLTYPE_INT | CTLFLAG_RW, sc, 0, 1337 sysctl_bcm2835_cpufreq_voltage_core, "I", 1338 "ARM/GPU core voltage" 1339 "(offset from 1.2V in units of 0.025V)"); 1340 SYSCTL_ADD_PROC(&bcm2835_sysctl_ctx, SYSCTL_CHILDREN(oid), 1341 OID_AUTO, "voltage_sdram", CTLTYPE_INT | CTLFLAG_WR, sc, 1342 0, sysctl_bcm2835_cpufreq_voltage_sdram, "I", 1343 "SDRAM voltage (offset from 1.2V in units of 0.025V)"); 1344 1345 /* Voltage individual SDRAM */ 1346 SYSCTL_ADD_PROC(&bcm2835_sysctl_ctx, SYSCTL_CHILDREN(oid), 1347 OID_AUTO, "voltage_sdram_c", CTLTYPE_INT | CTLFLAG_RW, sc, 1348 0, sysctl_bcm2835_cpufreq_voltage_sdram_c, "I", 1349 "SDRAM controller voltage" 1350 "(offset from 1.2V in units of 0.025V)"); 1351 SYSCTL_ADD_PROC(&bcm2835_sysctl_ctx, SYSCTL_CHILDREN(oid), 1352 OID_AUTO, "voltage_sdram_i", CTLTYPE_INT | CTLFLAG_RW, sc, 1353 0, sysctl_bcm2835_cpufreq_voltage_sdram_i, "I", 1354 "SDRAM I/O voltage (offset from 1.2V in units of 0.025V)"); 1355 SYSCTL_ADD_PROC(&bcm2835_sysctl_ctx, SYSCTL_CHILDREN(oid), 1356 OID_AUTO, "voltage_sdram_p", CTLTYPE_INT | CTLFLAG_RW, sc, 1357 0, sysctl_bcm2835_cpufreq_voltage_sdram_p, "I", 1358 "SDRAM phy voltage (offset from 1.2V in units of 0.025V)"); 1359 1360 /* Temperature */ 1361 SYSCTL_ADD_PROC(&bcm2835_sysctl_ctx, SYSCTL_CHILDREN(oid), 1362 OID_AUTO, "temperature", CTLTYPE_INT | CTLFLAG_RD, sc, 0, 1363 sysctl_bcm2835_cpufreq_temperature, "I", 1364 "SoC temperature (thousandths of a degree C)"); 1365 } 1366 1367 /* ARM->VC lock */ 1368 sema_init(&vc_sema, 1, "vcsema"); 1369 1370 /* register callback for using mbox when interrupts are enabled */ 1371 sc->init_hook.ich_func = bcm2835_cpufreq_init; 1372 sc->init_hook.ich_arg = sc; 1373 1374 if (config_intrhook_establish(&sc->init_hook) != 0) { 1375 device_printf(dev, "config_intrhook_establish failed\n"); 1376 return (ENOMEM); 1377 } 1378 1379 /* this device is controlled by cpufreq(4) */ 1380 cpufreq_register(dev); 1381 1382 return (0); 1383 } 1384 1385 static int 1386 bcm2835_cpufreq_detach(device_t dev) 1387 { 1388 struct bcm2835_cpufreq_softc *sc; 1389 1390 sc = device_get_softc(dev); 1391 1392 sema_destroy(&vc_sema); 1393 1394 return (cpufreq_unregister(dev)); 1395 } 1396 1397 static int 1398 bcm2835_cpufreq_set(device_t dev, const struct cf_setting *cf) 1399 { 1400 struct bcm2835_cpufreq_softc *sc; 1401 uint32_t rate_hz, rem; 1402 int cur_freq, resp_freq, arm_freq, min_freq, core_freq; 1403 1404 if (cf == NULL || cf->freq < 0) 1405 return (EINVAL); 1406 1407 sc = device_get_softc(dev); 1408 1409 /* setting clock (Hz) */ 1410 rate_hz = (uint32_t)MHZ2HZ(cf->freq); 1411 rem = rate_hz % HZSTEP; 1412 rate_hz -= rem; 1413 if (rate_hz == 0) 1414 return (EINVAL); 1415 1416 /* adjust min freq */ 1417 min_freq = sc->arm_min_freq; 1418 if (sc->turbo_mode != BCM2835_MBOX_TURBO_ON) 1419 if (min_freq > cpufreq_lowest_freq) 1420 min_freq = cpufreq_lowest_freq; 1421 1422 if (rate_hz < MHZ2HZ(min_freq) || rate_hz > MHZ2HZ(sc->arm_max_freq)) 1423 return (EINVAL); 1424 1425 /* set new value and verify it */ 1426 VC_LOCK(sc); 1427 cur_freq = bcm2835_cpufreq_get_clock_rate(sc, 1428 BCM2835_MBOX_CLOCK_ID_ARM); 1429 resp_freq = bcm2835_cpufreq_set_clock_rate(sc, 1430 BCM2835_MBOX_CLOCK_ID_ARM, rate_hz); 1431 DELAY(TRANSITION_LATENCY); 1432 arm_freq = bcm2835_cpufreq_get_clock_rate(sc, 1433 BCM2835_MBOX_CLOCK_ID_ARM); 1434 1435 /* 1436 * if non-turbo and lower than or equal min_freq, 1437 * clock down core and sdram to default first. 1438 */ 1439 if (sc->turbo_mode != BCM2835_MBOX_TURBO_ON) { 1440 core_freq = bcm2835_cpufreq_get_clock_rate(sc, 1441 BCM2835_MBOX_CLOCK_ID_CORE); 1442 if (rate_hz > MHZ2HZ(sc->arm_min_freq)) { 1443 bcm2835_cpufreq_set_clock_rate(sc, 1444 BCM2835_MBOX_CLOCK_ID_CORE, 1445 MHZ2HZ(sc->core_max_freq)); 1446 DELAY(TRANSITION_LATENCY); 1447 bcm2835_cpufreq_set_clock_rate(sc, 1448 BCM2835_MBOX_CLOCK_ID_SDRAM, 1449 MHZ2HZ(sc->sdram_max_freq)); 1450 DELAY(TRANSITION_LATENCY); 1451 } else { 1452 if (sc->core_min_freq < DEFAULT_CORE_FREQUENCY && 1453 core_freq > DEFAULT_CORE_FREQUENCY) { 1454 /* first, down to 250, then down to min */ 1455 DELAY(TRANSITION_LATENCY); 1456 bcm2835_cpufreq_set_clock_rate(sc, 1457 BCM2835_MBOX_CLOCK_ID_CORE, 1458 MHZ2HZ(DEFAULT_CORE_FREQUENCY)); 1459 DELAY(TRANSITION_LATENCY); 1460 /* reset core voltage */ 1461 bcm2835_cpufreq_set_voltage(sc, 1462 BCM2835_MBOX_VOLTAGE_ID_CORE, 0); 1463 DELAY(TRANSITION_LATENCY); 1464 } 1465 bcm2835_cpufreq_set_clock_rate(sc, 1466 BCM2835_MBOX_CLOCK_ID_CORE, 1467 MHZ2HZ(sc->core_min_freq)); 1468 DELAY(TRANSITION_LATENCY); 1469 bcm2835_cpufreq_set_clock_rate(sc, 1470 BCM2835_MBOX_CLOCK_ID_SDRAM, 1471 MHZ2HZ(sc->sdram_min_freq)); 1472 DELAY(TRANSITION_LATENCY); 1473 } 1474 } 1475 1476 VC_UNLOCK(sc); 1477 1478 if (resp_freq < 0 || arm_freq < 0 || resp_freq != arm_freq) { 1479 device_printf(dev, "wrong freq\n"); 1480 return (EIO); 1481 } 1482 DPRINTF("cpufreq: %d -> %d\n", cur_freq, arm_freq); 1483 1484 return (0); 1485 } 1486 1487 static int 1488 bcm2835_cpufreq_get(device_t dev, struct cf_setting *cf) 1489 { 1490 struct bcm2835_cpufreq_softc *sc; 1491 int arm_freq; 1492 1493 if (cf == NULL) 1494 return (EINVAL); 1495 1496 sc = device_get_softc(dev); 1497 memset(cf, CPUFREQ_VAL_UNKNOWN, sizeof(*cf)); 1498 cf->dev = NULL; 1499 1500 /* get cuurent value */ 1501 VC_LOCK(sc); 1502 arm_freq = bcm2835_cpufreq_get_clock_rate(sc, 1503 BCM2835_MBOX_CLOCK_ID_ARM); 1504 VC_UNLOCK(sc); 1505 if (arm_freq < 0) { 1506 device_printf(dev, "can't get clock\n"); 1507 return (EINVAL); 1508 } 1509 1510 /* CPU clock in MHz or 100ths of a percent. */ 1511 cf->freq = HZ2MHZ(arm_freq); 1512 /* Voltage in mV. */ 1513 cf->volts = CPUFREQ_VAL_UNKNOWN; 1514 /* Power consumed in mW. */ 1515 cf->power = CPUFREQ_VAL_UNKNOWN; 1516 /* Transition latency in us. */ 1517 cf->lat = TRANSITION_LATENCY; 1518 /* Driver providing this setting. */ 1519 cf->dev = dev; 1520 1521 return (0); 1522 } 1523 1524 static int 1525 bcm2835_cpufreq_make_freq_list(device_t dev, struct cf_setting *sets, 1526 int *count) 1527 { 1528 struct bcm2835_cpufreq_softc *sc; 1529 int freq, min_freq, volts, rem; 1530 int idx; 1531 1532 sc = device_get_softc(dev); 1533 freq = sc->arm_max_freq; 1534 min_freq = sc->arm_min_freq; 1535 1536 /* adjust head freq to STEP */ 1537 rem = freq % MHZSTEP; 1538 freq -= rem; 1539 if (freq < min_freq) 1540 freq = min_freq; 1541 1542 /* if non-turbo, add extra low freq */ 1543 if (sc->turbo_mode != BCM2835_MBOX_TURBO_ON) 1544 if (min_freq > cpufreq_lowest_freq) 1545 min_freq = cpufreq_lowest_freq; 1546 1547 #ifdef SOC_BCM2836 1548 /* XXX RPi2 have only 900/600MHz */ 1549 idx = 0; 1550 volts = sc->min_voltage_core; 1551 sets[idx].freq = freq; 1552 sets[idx].volts = volts; 1553 sets[idx].lat = TRANSITION_LATENCY; 1554 sets[idx].dev = dev; 1555 idx++; 1556 if (freq != min_freq) { 1557 sets[idx].freq = min_freq; 1558 sets[idx].volts = volts; 1559 sets[idx].lat = TRANSITION_LATENCY; 1560 sets[idx].dev = dev; 1561 idx++; 1562 } 1563 #else 1564 /* from freq to min_freq */ 1565 for (idx = 0; idx < *count && freq >= min_freq; idx++) { 1566 if (freq > sc->arm_min_freq) 1567 volts = sc->max_voltage_core; 1568 else 1569 volts = sc->min_voltage_core; 1570 sets[idx].freq = freq; 1571 sets[idx].volts = volts; 1572 sets[idx].lat = TRANSITION_LATENCY; 1573 sets[idx].dev = dev; 1574 freq -= MHZSTEP; 1575 } 1576 #endif 1577 *count = idx; 1578 1579 return (0); 1580 } 1581 1582 static int 1583 bcm2835_cpufreq_settings(device_t dev, struct cf_setting *sets, int *count) 1584 { 1585 struct bcm2835_cpufreq_softc *sc; 1586 1587 if (sets == NULL || count == NULL) 1588 return (EINVAL); 1589 1590 sc = device_get_softc(dev); 1591 if (sc->arm_min_freq < 0 || sc->arm_max_freq < 0) { 1592 printf("device is not configured\n"); 1593 return (EINVAL); 1594 } 1595 1596 /* fill data with unknown value */ 1597 memset(sets, CPUFREQ_VAL_UNKNOWN, sizeof(*sets) * (*count)); 1598 /* create new array up to count */ 1599 bcm2835_cpufreq_make_freq_list(dev, sets, count); 1600 1601 return (0); 1602 } 1603 1604 static int 1605 bcm2835_cpufreq_type(device_t dev, int *type) 1606 { 1607 1608 if (type == NULL) 1609 return (EINVAL); 1610 *type = CPUFREQ_TYPE_ABSOLUTE; 1611 1612 return (0); 1613 } 1614 1615 static device_method_t bcm2835_cpufreq_methods[] = { 1616 /* Device interface */ 1617 DEVMETHOD(device_identify, bcm2835_cpufreq_identify), 1618 DEVMETHOD(device_probe, bcm2835_cpufreq_probe), 1619 DEVMETHOD(device_attach, bcm2835_cpufreq_attach), 1620 DEVMETHOD(device_detach, bcm2835_cpufreq_detach), 1621 1622 /* cpufreq interface */ 1623 DEVMETHOD(cpufreq_drv_set, bcm2835_cpufreq_set), 1624 DEVMETHOD(cpufreq_drv_get, bcm2835_cpufreq_get), 1625 DEVMETHOD(cpufreq_drv_settings, bcm2835_cpufreq_settings), 1626 DEVMETHOD(cpufreq_drv_type, bcm2835_cpufreq_type), 1627 1628 DEVMETHOD_END 1629 }; 1630 1631 static devclass_t bcm2835_cpufreq_devclass; 1632 static driver_t bcm2835_cpufreq_driver = { 1633 "bcm2835_cpufreq", 1634 bcm2835_cpufreq_methods, 1635 sizeof(struct bcm2835_cpufreq_softc), 1636 }; 1637 1638 DRIVER_MODULE(bcm2835_cpufreq, cpu, bcm2835_cpufreq_driver, 1639 bcm2835_cpufreq_devclass, 0, 0); 1640