1 /*- 2 * Copyright (c) 2018 Emmanuel Vadot <manu@freebsd.org> 3 * Copyright (c) 2016 Jared McNeill <jmcneill@invisible.ca> 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 15 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 16 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 17 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 18 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, 19 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 20 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED 21 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, 22 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 23 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 24 * SUCH DAMAGE. 25 * 26 * $FreeBSD$ 27 */ 28 29 /* 30 * X-Powers AXP803/813/818 PMU for Allwinner SoCs 31 */ 32 33 #include <sys/cdefs.h> 34 __FBSDID("$FreeBSD$"); 35 36 #include <sys/param.h> 37 #include <sys/systm.h> 38 #include <sys/eventhandler.h> 39 #include <sys/bus.h> 40 #include <sys/rman.h> 41 #include <sys/kernel.h> 42 #include <sys/reboot.h> 43 #include <sys/gpio.h> 44 #include <sys/module.h> 45 #include <machine/bus.h> 46 47 #include <dev/iicbus/iicbus.h> 48 #include <dev/iicbus/iiconf.h> 49 50 #include <dev/gpio/gpiobusvar.h> 51 52 #include <dev/ofw/ofw_bus.h> 53 #include <dev/ofw/ofw_bus_subr.h> 54 55 #include <dev/extres/regulator/regulator.h> 56 57 #include "gpio_if.h" 58 #include "iicbus_if.h" 59 #include "regdev_if.h" 60 61 MALLOC_DEFINE(M_AXP8XX_REG, "AXP8xx regulator", "AXP8xx power regulator"); 62 63 #define AXP_POWERSRC 0x00 64 #define AXP_POWERSRC_ACIN (1 << 7) 65 #define AXP_POWERSRC_VBUS (1 << 5) 66 #define AXP_POWERSRC_VBAT (1 << 3) 67 #define AXP_POWERSRC_CHARING (1 << 2) /* Charging Direction */ 68 #define AXP_POWERSRC_SHORTED (1 << 1) 69 #define AXP_POWERSRC_STARTUP (1 << 0) 70 #define AXP_POWERMODE 0x01 71 #define AXP_POWERMODE_BAT_CHARGING (1 << 6) 72 #define AXP_POWERMODE_BAT_PRESENT (1 << 5) 73 #define AXP_POWERMODE_BAT_VALID (1 << 4) 74 #define AXP_ICTYPE 0x03 75 #define AXP_POWERCTL1 0x10 76 #define AXP_POWERCTL1_DCDC7 (1 << 6) /* AXP813/818 only */ 77 #define AXP_POWERCTL1_DCDC6 (1 << 5) 78 #define AXP_POWERCTL1_DCDC5 (1 << 4) 79 #define AXP_POWERCTL1_DCDC4 (1 << 3) 80 #define AXP_POWERCTL1_DCDC3 (1 << 2) 81 #define AXP_POWERCTL1_DCDC2 (1 << 1) 82 #define AXP_POWERCTL1_DCDC1 (1 << 0) 83 #define AXP_POWERCTL2 0x12 84 #define AXP_POWERCTL2_DC1SW (1 << 7) /* AXP803 only */ 85 #define AXP_POWERCTL2_DLDO4 (1 << 6) 86 #define AXP_POWERCTL2_DLDO3 (1 << 5) 87 #define AXP_POWERCTL2_DLDO2 (1 << 4) 88 #define AXP_POWERCTL2_DLDO1 (1 << 3) 89 #define AXP_POWERCTL2_ELDO3 (1 << 2) 90 #define AXP_POWERCTL2_ELDO2 (1 << 1) 91 #define AXP_POWERCTL2_ELDO1 (1 << 0) 92 #define AXP_POWERCTL3 0x13 93 #define AXP_POWERCTL3_ALDO3 (1 << 7) 94 #define AXP_POWERCTL3_ALDO2 (1 << 6) 95 #define AXP_POWERCTL3_ALDO1 (1 << 5) 96 #define AXP_POWERCTL3_FLDO3 (1 << 4) /* AXP813/818 only */ 97 #define AXP_POWERCTL3_FLDO2 (1 << 3) 98 #define AXP_POWERCTL3_FLDO1 (1 << 2) 99 #define AXP_VOLTCTL_DLDO1 0x15 100 #define AXP_VOLTCTL_DLDO2 0x16 101 #define AXP_VOLTCTL_DLDO3 0x17 102 #define AXP_VOLTCTL_DLDO4 0x18 103 #define AXP_VOLTCTL_ELDO1 0x19 104 #define AXP_VOLTCTL_ELDO2 0x1A 105 #define AXP_VOLTCTL_ELDO3 0x1B 106 #define AXP_VOLTCTL_FLDO1 0x1C 107 #define AXP_VOLTCTL_FLDO2 0x1D 108 #define AXP_VOLTCTL_DCDC1 0x20 109 #define AXP_VOLTCTL_DCDC2 0x21 110 #define AXP_VOLTCTL_DCDC3 0x22 111 #define AXP_VOLTCTL_DCDC4 0x23 112 #define AXP_VOLTCTL_DCDC5 0x24 113 #define AXP_VOLTCTL_DCDC6 0x25 114 #define AXP_VOLTCTL_DCDC7 0x26 115 #define AXP_VOLTCTL_ALDO1 0x28 116 #define AXP_VOLTCTL_ALDO2 0x29 117 #define AXP_VOLTCTL_ALDO3 0x2A 118 #define AXP_VOLTCTL_STATUS (1 << 7) 119 #define AXP_VOLTCTL_MASK 0x7f 120 #define AXP_POWERBAT 0x32 121 #define AXP_POWERBAT_SHUTDOWN (1 << 7) 122 #define AXP_CHARGERCTL1 0x33 123 #define AXP_CHARGERCTL1_MIN 0 124 #define AXP_CHARGERCTL1_MAX 13 125 #define AXP_CHARGERCTL1_CMASK 0xf 126 #define AXP_IRQEN1 0x40 127 #define AXP_IRQEN1_ACIN_HI (1 << 6) 128 #define AXP_IRQEN1_ACIN_LO (1 << 5) 129 #define AXP_IRQEN1_VBUS_HI (1 << 3) 130 #define AXP_IRQEN1_VBUS_LO (1 << 2) 131 #define AXP_IRQEN2 0x41 132 #define AXP_IRQEN2_BAT_IN (1 << 7) 133 #define AXP_IRQEN2_BAT_NO (1 << 6) 134 #define AXP_IRQEN2_BATCHGC (1 << 3) 135 #define AXP_IRQEN2_BATCHGD (1 << 2) 136 #define AXP_IRQEN3 0x42 137 #define AXP_IRQEN4 0x43 138 #define AXP_IRQEN4_BATLVL_LO1 (1 << 1) 139 #define AXP_IRQEN4_BATLVL_LO0 (1 << 0) 140 #define AXP_IRQEN5 0x44 141 #define AXP_IRQEN5_POKSIRQ (1 << 4) 142 #define AXP_IRQEN5_POKLIRQ (1 << 3) 143 #define AXP_IRQEN6 0x45 144 #define AXP_IRQSTAT1 0x48 145 #define AXP_IRQSTAT1_ACIN_HI (1 << 6) 146 #define AXP_IRQSTAT1_ACIN_LO (1 << 5) 147 #define AXP_IRQSTAT1_VBUS_HI (1 << 3) 148 #define AXP_IRQSTAT1_VBUS_LO (1 << 2) 149 #define AXP_IRQSTAT2 0x49 150 #define AXP_IRQSTAT2_BAT_IN (1 << 7) 151 #define AXP_IRQSTAT2_BAT_NO (1 << 6) 152 #define AXP_IRQSTAT2_BATCHGC (1 << 3) 153 #define AXP_IRQSTAT2_BATCHGD (1 << 2) 154 #define AXP_IRQSTAT3 0x4a 155 #define AXP_IRQSTAT4 0x4b 156 #define AXP_IRQSTAT4_BATLVL_LO1 (1 << 1) 157 #define AXP_IRQSTAT4_BATLVL_LO0 (1 << 0) 158 #define AXP_IRQSTAT5 0x4c 159 #define AXP_IRQSTAT5_POKSIRQ (1 << 4) 160 #define AXP_IRQEN5_POKLIRQ (1 << 3) 161 #define AXP_IRQSTAT6 0x4d 162 #define AXP_BATSENSE_HI 0x78 163 #define AXP_BATSENSE_LO 0x79 164 #define AXP_BATCHG_HI 0x7a 165 #define AXP_BATCHG_LO 0x7b 166 #define AXP_BATDISCHG_HI 0x7c 167 #define AXP_BATDISCHG_LO 0x7d 168 #define AXP_GPIO0_CTRL 0x90 169 #define AXP_GPIO0LDO_CTRL 0x91 170 #define AXP_GPIO1_CTRL 0x92 171 #define AXP_GPIO1LDO_CTRL 0x93 172 #define AXP_GPIO_FUNC (0x7 << 0) 173 #define AXP_GPIO_FUNC_SHIFT 0 174 #define AXP_GPIO_FUNC_DRVLO 0 175 #define AXP_GPIO_FUNC_DRVHI 1 176 #define AXP_GPIO_FUNC_INPUT 2 177 #define AXP_GPIO_FUNC_LDO_ON 3 178 #define AXP_GPIO_FUNC_LDO_OFF 4 179 #define AXP_GPIO_SIGBIT 0x94 180 #define AXP_GPIO_PD 0x97 181 #define AXP_FUEL_GAUGECTL 0xb8 182 #define AXP_FUEL_GAUGECTL_EN (1 << 7) 183 184 #define AXP_BAT_CAP 0xb9 185 #define AXP_BAT_CAP_VALID (1 << 7) 186 #define AXP_BAT_CAP_PERCENT 0x7f 187 188 #define AXP_BAT_MAX_CAP_HI 0xe0 189 #define AXP_BAT_MAX_CAP_VALID (1 << 7) 190 #define AXP_BAT_MAX_CAP_LO 0xe1 191 192 #define AXP_BAT_COULOMB_HI 0xe2 193 #define AXP_BAT_COULOMB_VALID (1 << 7) 194 #define AXP_BAT_COULOMB_LO 0xe3 195 196 #define AXP_BAT_CAP_WARN 0xe6 197 #define AXP_BAT_CAP_WARN_LV1 0xf0 /* Bits 4, 5, 6, 7 */ 198 #define AXP_BAP_CAP_WARN_LV1BASE 5 /* 5-20%, 1% per step */ 199 #define AXP_BAT_CAP_WARN_LV2 0xf /* Bits 0, 1, 2, 3 */ 200 201 /* Sensor conversion macros */ 202 #define AXP_SENSOR_BAT_H(hi) ((hi) << 4) 203 #define AXP_SENSOR_BAT_L(lo) ((lo) & 0xf) 204 #define AXP_SENSOR_COULOMB(hi, lo) (((hi & ~(1 << 7)) << 8) | (lo)) 205 206 static const struct { 207 const char *name; 208 uint8_t ctrl_reg; 209 } axp8xx_pins[] = { 210 { "GPIO0", AXP_GPIO0_CTRL }, 211 { "GPIO1", AXP_GPIO1_CTRL }, 212 }; 213 214 enum AXP8XX_TYPE { 215 AXP803 = 1, 216 AXP813, 217 }; 218 219 static struct ofw_compat_data compat_data[] = { 220 { "x-powers,axp803", AXP803 }, 221 { "x-powers,axp813", AXP813 }, 222 { "x-powers,axp818", AXP813 }, 223 { NULL, 0 } 224 }; 225 226 static struct resource_spec axp8xx_spec[] = { 227 { SYS_RES_IRQ, 0, RF_ACTIVE }, 228 { -1, 0 } 229 }; 230 231 struct axp8xx_regdef { 232 intptr_t id; 233 char *name; 234 char *supply_name; 235 uint8_t enable_reg; 236 uint8_t enable_mask; 237 uint8_t enable_value; 238 uint8_t disable_value; 239 uint8_t voltage_reg; 240 int voltage_min; 241 int voltage_max; 242 int voltage_step1; 243 int voltage_nstep1; 244 int voltage_step2; 245 int voltage_nstep2; 246 }; 247 248 enum axp8xx_reg_id { 249 AXP8XX_REG_ID_DCDC1 = 100, 250 AXP8XX_REG_ID_DCDC2, 251 AXP8XX_REG_ID_DCDC3, 252 AXP8XX_REG_ID_DCDC4, 253 AXP8XX_REG_ID_DCDC5, 254 AXP8XX_REG_ID_DCDC6, 255 AXP813_REG_ID_DCDC7, 256 AXP803_REG_ID_DC1SW, 257 AXP8XX_REG_ID_DLDO1, 258 AXP8XX_REG_ID_DLDO2, 259 AXP8XX_REG_ID_DLDO3, 260 AXP8XX_REG_ID_DLDO4, 261 AXP8XX_REG_ID_ELDO1, 262 AXP8XX_REG_ID_ELDO2, 263 AXP8XX_REG_ID_ELDO3, 264 AXP8XX_REG_ID_ALDO1, 265 AXP8XX_REG_ID_ALDO2, 266 AXP8XX_REG_ID_ALDO3, 267 AXP8XX_REG_ID_FLDO1, 268 AXP8XX_REG_ID_FLDO2, 269 AXP813_REG_ID_FLDO3, 270 AXP8XX_REG_ID_GPIO0_LDO, 271 AXP8XX_REG_ID_GPIO1_LDO, 272 }; 273 274 static struct axp8xx_regdef axp803_regdefs[] = { 275 { 276 .id = AXP803_REG_ID_DC1SW, 277 .name = "dc1sw", 278 .enable_reg = AXP_POWERCTL2, 279 .enable_mask = (uint8_t) AXP_POWERCTL2_DC1SW, 280 .enable_value = AXP_POWERCTL2_DC1SW, 281 }, 282 }; 283 284 static struct axp8xx_regdef axp813_regdefs[] = { 285 { 286 .id = AXP813_REG_ID_DCDC7, 287 .name = "dcdc7", 288 .enable_reg = AXP_POWERCTL1, 289 .enable_mask = (uint8_t) AXP_POWERCTL1_DCDC7, 290 .enable_value = AXP_POWERCTL1_DCDC7, 291 .voltage_reg = AXP_VOLTCTL_DCDC7, 292 .voltage_min = 600, 293 .voltage_max = 1520, 294 .voltage_step1 = 10, 295 .voltage_nstep1 = 50, 296 .voltage_step2 = 20, 297 .voltage_nstep2 = 21, 298 }, 299 }; 300 301 static struct axp8xx_regdef axp8xx_common_regdefs[] = { 302 { 303 .id = AXP8XX_REG_ID_DCDC1, 304 .name = "dcdc1", 305 .enable_reg = AXP_POWERCTL1, 306 .enable_mask = (uint8_t) AXP_POWERCTL1_DCDC1, 307 .enable_value = AXP_POWERCTL1_DCDC1, 308 .voltage_reg = AXP_VOLTCTL_DCDC1, 309 .voltage_min = 1600, 310 .voltage_max = 3400, 311 .voltage_step1 = 100, 312 .voltage_nstep1 = 18, 313 }, 314 { 315 .id = AXP8XX_REG_ID_DCDC2, 316 .name = "dcdc2", 317 .enable_reg = AXP_POWERCTL1, 318 .enable_mask = (uint8_t) AXP_POWERCTL1_DCDC2, 319 .enable_value = AXP_POWERCTL1_DCDC2, 320 .voltage_reg = AXP_VOLTCTL_DCDC2, 321 .voltage_min = 500, 322 .voltage_max = 1300, 323 .voltage_step1 = 10, 324 .voltage_nstep1 = 70, 325 .voltage_step2 = 20, 326 .voltage_nstep2 = 5, 327 }, 328 { 329 .id = AXP8XX_REG_ID_DCDC3, 330 .name = "dcdc3", 331 .enable_reg = AXP_POWERCTL1, 332 .enable_mask = (uint8_t) AXP_POWERCTL1_DCDC3, 333 .enable_value = AXP_POWERCTL1_DCDC3, 334 .voltage_reg = AXP_VOLTCTL_DCDC3, 335 .voltage_min = 500, 336 .voltage_max = 1300, 337 .voltage_step1 = 10, 338 .voltage_nstep1 = 70, 339 .voltage_step2 = 20, 340 .voltage_nstep2 = 5, 341 }, 342 { 343 .id = AXP8XX_REG_ID_DCDC4, 344 .name = "dcdc4", 345 .enable_reg = AXP_POWERCTL1, 346 .enable_mask = (uint8_t) AXP_POWERCTL1_DCDC4, 347 .enable_value = AXP_POWERCTL1_DCDC4, 348 .voltage_reg = AXP_VOLTCTL_DCDC4, 349 .voltage_min = 500, 350 .voltage_max = 1300, 351 .voltage_step1 = 10, 352 .voltage_nstep1 = 70, 353 .voltage_step2 = 20, 354 .voltage_nstep2 = 5, 355 }, 356 { 357 .id = AXP8XX_REG_ID_DCDC5, 358 .name = "dcdc5", 359 .enable_reg = AXP_POWERCTL1, 360 .enable_mask = (uint8_t) AXP_POWERCTL1_DCDC5, 361 .enable_value = AXP_POWERCTL1_DCDC5, 362 .voltage_reg = AXP_VOLTCTL_DCDC5, 363 .voltage_min = 800, 364 .voltage_max = 1840, 365 .voltage_step1 = 10, 366 .voltage_nstep1 = 42, 367 .voltage_step2 = 20, 368 .voltage_nstep2 = 36, 369 }, 370 { 371 .id = AXP8XX_REG_ID_DCDC6, 372 .name = "dcdc6", 373 .enable_reg = AXP_POWERCTL1, 374 .enable_mask = (uint8_t) AXP_POWERCTL1_DCDC6, 375 .enable_value = AXP_POWERCTL1_DCDC6, 376 .voltage_reg = AXP_VOLTCTL_DCDC6, 377 .voltage_min = 600, 378 .voltage_max = 1520, 379 .voltage_step1 = 10, 380 .voltage_nstep1 = 50, 381 .voltage_step2 = 20, 382 .voltage_nstep2 = 21, 383 }, 384 { 385 .id = AXP8XX_REG_ID_DLDO1, 386 .name = "dldo1", 387 .enable_reg = AXP_POWERCTL2, 388 .enable_mask = (uint8_t) AXP_POWERCTL2_DLDO1, 389 .enable_value = AXP_POWERCTL2_DLDO1, 390 .voltage_reg = AXP_VOLTCTL_DLDO1, 391 .voltage_min = 700, 392 .voltage_max = 3300, 393 .voltage_step1 = 100, 394 .voltage_nstep1 = 26, 395 }, 396 { 397 .id = AXP8XX_REG_ID_DLDO2, 398 .name = "dldo2", 399 .enable_reg = AXP_POWERCTL2, 400 .enable_mask = (uint8_t) AXP_POWERCTL2_DLDO2, 401 .enable_value = AXP_POWERCTL2_DLDO2, 402 .voltage_reg = AXP_VOLTCTL_DLDO2, 403 .voltage_min = 700, 404 .voltage_max = 4200, 405 .voltage_step1 = 100, 406 .voltage_nstep1 = 27, 407 .voltage_step2 = 200, 408 .voltage_nstep2 = 4, 409 }, 410 { 411 .id = AXP8XX_REG_ID_DLDO3, 412 .name = "dldo3", 413 .enable_reg = AXP_POWERCTL2, 414 .enable_mask = (uint8_t) AXP_POWERCTL2_DLDO3, 415 .enable_value = AXP_POWERCTL2_DLDO3, 416 .voltage_reg = AXP_VOLTCTL_DLDO3, 417 .voltage_min = 700, 418 .voltage_max = 3300, 419 .voltage_step1 = 100, 420 .voltage_nstep1 = 26, 421 }, 422 { 423 .id = AXP8XX_REG_ID_DLDO4, 424 .name = "dldo4", 425 .enable_reg = AXP_POWERCTL2, 426 .enable_mask = (uint8_t) AXP_POWERCTL2_DLDO4, 427 .enable_value = AXP_POWERCTL2_DLDO4, 428 .voltage_reg = AXP_VOLTCTL_DLDO4, 429 .voltage_min = 700, 430 .voltage_max = 3300, 431 .voltage_step1 = 100, 432 .voltage_nstep1 = 26, 433 }, 434 { 435 .id = AXP8XX_REG_ID_ALDO1, 436 .name = "aldo1", 437 .enable_reg = AXP_POWERCTL3, 438 .enable_mask = (uint8_t) AXP_POWERCTL3_ALDO1, 439 .enable_value = AXP_POWERCTL3_ALDO1, 440 .voltage_reg = AXP_VOLTCTL_ALDO1, 441 .voltage_min = 700, 442 .voltage_max = 3300, 443 .voltage_step1 = 100, 444 .voltage_nstep1 = 26, 445 }, 446 { 447 .id = AXP8XX_REG_ID_ALDO2, 448 .name = "aldo2", 449 .enable_reg = AXP_POWERCTL3, 450 .enable_mask = (uint8_t) AXP_POWERCTL3_ALDO2, 451 .enable_value = AXP_POWERCTL3_ALDO2, 452 .voltage_reg = AXP_VOLTCTL_ALDO2, 453 .voltage_min = 700, 454 .voltage_max = 3300, 455 .voltage_step1 = 100, 456 .voltage_nstep1 = 26, 457 }, 458 { 459 .id = AXP8XX_REG_ID_ALDO3, 460 .name = "aldo3", 461 .enable_reg = AXP_POWERCTL3, 462 .enable_mask = (uint8_t) AXP_POWERCTL3_ALDO3, 463 .enable_value = AXP_POWERCTL3_ALDO3, 464 .voltage_reg = AXP_VOLTCTL_ALDO3, 465 .voltage_min = 700, 466 .voltage_max = 3300, 467 .voltage_step1 = 100, 468 .voltage_nstep1 = 26, 469 }, 470 { 471 .id = AXP8XX_REG_ID_ELDO1, 472 .name = "eldo1", 473 .enable_reg = AXP_POWERCTL2, 474 .enable_mask = (uint8_t) AXP_POWERCTL2_ELDO1, 475 .enable_value = AXP_POWERCTL2_ELDO1, 476 .voltage_reg = AXP_VOLTCTL_ELDO1, 477 .voltage_min = 700, 478 .voltage_max = 1900, 479 .voltage_step1 = 50, 480 .voltage_nstep1 = 24, 481 }, 482 { 483 .id = AXP8XX_REG_ID_ELDO2, 484 .name = "eldo2", 485 .enable_reg = AXP_POWERCTL2, 486 .enable_mask = (uint8_t) AXP_POWERCTL2_ELDO2, 487 .enable_value = AXP_POWERCTL2_ELDO2, 488 .voltage_reg = AXP_VOLTCTL_ELDO2, 489 .voltage_min = 700, 490 .voltage_max = 1900, 491 .voltage_step1 = 50, 492 .voltage_nstep1 = 24, 493 }, 494 { 495 .id = AXP8XX_REG_ID_ELDO3, 496 .name = "eldo3", 497 .enable_reg = AXP_POWERCTL2, 498 .enable_mask = (uint8_t) AXP_POWERCTL2_ELDO3, 499 .enable_value = AXP_POWERCTL2_ELDO3, 500 .voltage_reg = AXP_VOLTCTL_ELDO3, 501 .voltage_min = 700, 502 .voltage_max = 1900, 503 .voltage_step1 = 50, 504 .voltage_nstep1 = 24, 505 }, 506 { 507 .id = AXP8XX_REG_ID_FLDO1, 508 .name = "fldo1", 509 .enable_reg = AXP_POWERCTL3, 510 .enable_mask = (uint8_t) AXP_POWERCTL3_FLDO1, 511 .enable_value = AXP_POWERCTL3_FLDO1, 512 .voltage_reg = AXP_VOLTCTL_FLDO1, 513 .voltage_min = 700, 514 .voltage_max = 1450, 515 .voltage_step1 = 50, 516 .voltage_nstep1 = 15, 517 }, 518 { 519 .id = AXP8XX_REG_ID_FLDO2, 520 .name = "fldo2", 521 .enable_reg = AXP_POWERCTL3, 522 .enable_mask = (uint8_t) AXP_POWERCTL3_FLDO2, 523 .enable_value = AXP_POWERCTL3_FLDO2, 524 .voltage_reg = AXP_VOLTCTL_FLDO2, 525 .voltage_min = 700, 526 .voltage_max = 1450, 527 .voltage_step1 = 50, 528 .voltage_nstep1 = 15, 529 }, 530 { 531 .id = AXP8XX_REG_ID_GPIO0_LDO, 532 .name = "ldo-io0", 533 .enable_reg = AXP_GPIO0_CTRL, 534 .enable_mask = (uint8_t) AXP_GPIO_FUNC, 535 .enable_value = AXP_GPIO_FUNC_LDO_ON, 536 .disable_value = AXP_GPIO_FUNC_LDO_OFF, 537 .voltage_reg = AXP_GPIO0LDO_CTRL, 538 .voltage_min = 700, 539 .voltage_max = 3300, 540 .voltage_step1 = 100, 541 .voltage_nstep1 = 26, 542 }, 543 { 544 .id = AXP8XX_REG_ID_GPIO1_LDO, 545 .name = "ldo-io1", 546 .enable_reg = AXP_GPIO1_CTRL, 547 .enable_mask = (uint8_t) AXP_GPIO_FUNC, 548 .enable_value = AXP_GPIO_FUNC_LDO_ON, 549 .disable_value = AXP_GPIO_FUNC_LDO_OFF, 550 .voltage_reg = AXP_GPIO1LDO_CTRL, 551 .voltage_min = 700, 552 .voltage_max = 3300, 553 .voltage_step1 = 100, 554 .voltage_nstep1 = 26, 555 }, 556 }; 557 558 enum axp8xx_sensor { 559 AXP_SENSOR_ACIN_PRESENT, 560 AXP_SENSOR_VBUS_PRESENT, 561 AXP_SENSOR_BATT_PRESENT, 562 AXP_SENSOR_BATT_CHARGING, 563 AXP_SENSOR_BATT_CHARGE_STATE, 564 AXP_SENSOR_BATT_VOLTAGE, 565 AXP_SENSOR_BATT_CHARGE_CURRENT, 566 AXP_SENSOR_BATT_DISCHARGE_CURRENT, 567 AXP_SENSOR_BATT_CAPACITY_PERCENT, 568 AXP_SENSOR_BATT_MAXIMUM_CAPACITY, 569 AXP_SENSOR_BATT_CURRENT_CAPACITY, 570 }; 571 572 enum battery_capacity_state { 573 BATT_CAPACITY_NORMAL = 1, /* normal cap in battery */ 574 BATT_CAPACITY_WARNING, /* warning cap in battery */ 575 BATT_CAPACITY_CRITICAL, /* critical cap in battery */ 576 BATT_CAPACITY_HIGH, /* high cap in battery */ 577 BATT_CAPACITY_MAX, /* maximum cap in battery */ 578 BATT_CAPACITY_LOW /* low cap in battery */ 579 }; 580 581 struct axp8xx_sensors { 582 int id; 583 const char *name; 584 const char *desc; 585 const char *format; 586 }; 587 588 static const struct axp8xx_sensors axp8xx_common_sensors[] = { 589 { 590 .id = AXP_SENSOR_ACIN_PRESENT, 591 .name = "acin", 592 .format = "I", 593 .desc = "ACIN Present", 594 }, 595 { 596 .id = AXP_SENSOR_VBUS_PRESENT, 597 .name = "vbus", 598 .format = "I", 599 .desc = "VBUS Present", 600 }, 601 { 602 .id = AXP_SENSOR_BATT_PRESENT, 603 .name = "bat", 604 .format = "I", 605 .desc = "Battery Present", 606 }, 607 { 608 .id = AXP_SENSOR_BATT_CHARGING, 609 .name = "batcharging", 610 .format = "I", 611 .desc = "Battery Charging", 612 }, 613 { 614 .id = AXP_SENSOR_BATT_CHARGE_STATE, 615 .name = "batchargestate", 616 .format = "I", 617 .desc = "Battery Charge State", 618 }, 619 { 620 .id = AXP_SENSOR_BATT_VOLTAGE, 621 .name = "batvolt", 622 .format = "I", 623 .desc = "Battery Voltage", 624 }, 625 { 626 .id = AXP_SENSOR_BATT_CHARGE_CURRENT, 627 .name = "batchargecurrent", 628 .format = "I", 629 .desc = "Average Battery Charging Current", 630 }, 631 { 632 .id = AXP_SENSOR_BATT_DISCHARGE_CURRENT, 633 .name = "batdischargecurrent", 634 .format = "I", 635 .desc = "Average Battery Discharging Current", 636 }, 637 { 638 .id = AXP_SENSOR_BATT_CAPACITY_PERCENT, 639 .name = "batcapacitypercent", 640 .format = "I", 641 .desc = "Battery Capacity Percentage", 642 }, 643 { 644 .id = AXP_SENSOR_BATT_MAXIMUM_CAPACITY, 645 .name = "batmaxcapacity", 646 .format = "I", 647 .desc = "Battery Maximum Capacity", 648 }, 649 { 650 .id = AXP_SENSOR_BATT_CURRENT_CAPACITY, 651 .name = "batcurrentcapacity", 652 .format = "I", 653 .desc = "Battery Current Capacity", 654 }, 655 }; 656 657 struct axp8xx_config { 658 const char *name; 659 int batsense_step; /* uV */ 660 int charge_step; /* uA */ 661 int discharge_step; /* uA */ 662 int maxcap_step; /* uAh */ 663 int coulomb_step; /* uAh */ 664 }; 665 666 static struct axp8xx_config axp803_config = { 667 .name = "AXP803", 668 .batsense_step = 1100, 669 .charge_step = 1000, 670 .discharge_step = 1000, 671 .maxcap_step = 1456, 672 .coulomb_step = 1456, 673 }; 674 675 struct axp8xx_softc; 676 677 struct axp8xx_reg_sc { 678 struct regnode *regnode; 679 device_t base_dev; 680 struct axp8xx_regdef *def; 681 phandle_t xref; 682 struct regnode_std_param *param; 683 }; 684 685 struct axp8xx_softc { 686 struct resource *res; 687 uint16_t addr; 688 void *ih; 689 device_t gpiodev; 690 struct mtx mtx; 691 int busy; 692 693 int type; 694 695 /* Configs */ 696 const struct axp8xx_config *config; 697 698 /* Sensors */ 699 const struct axp8xx_sensors *sensors; 700 int nsensors; 701 702 /* Regulators */ 703 struct axp8xx_reg_sc **regs; 704 int nregs; 705 706 /* Warning, shutdown thresholds */ 707 int warn_thres; 708 int shut_thres; 709 }; 710 711 #define AXP_LOCK(sc) mtx_lock(&(sc)->mtx) 712 #define AXP_UNLOCK(sc) mtx_unlock(&(sc)->mtx) 713 static int axp8xx_regnode_set_voltage(struct regnode *regnode, int min_uvolt, 714 int max_uvolt, int *udelay); 715 716 static int 717 axp8xx_read(device_t dev, uint8_t reg, uint8_t *data, uint8_t size) 718 { 719 struct axp8xx_softc *sc; 720 struct iic_msg msg[2]; 721 722 sc = device_get_softc(dev); 723 724 msg[0].slave = sc->addr; 725 msg[0].flags = IIC_M_WR; 726 msg[0].len = 1; 727 msg[0].buf = ® 728 729 msg[1].slave = sc->addr; 730 msg[1].flags = IIC_M_RD; 731 msg[1].len = size; 732 msg[1].buf = data; 733 734 return (iicbus_transfer(dev, msg, 2)); 735 } 736 737 static int 738 axp8xx_write(device_t dev, uint8_t reg, uint8_t val) 739 { 740 struct axp8xx_softc *sc; 741 struct iic_msg msg[2]; 742 743 sc = device_get_softc(dev); 744 745 msg[0].slave = sc->addr; 746 msg[0].flags = IIC_M_WR; 747 msg[0].len = 1; 748 msg[0].buf = ® 749 750 msg[1].slave = sc->addr; 751 msg[1].flags = IIC_M_WR; 752 msg[1].len = 1; 753 msg[1].buf = &val; 754 755 return (iicbus_transfer(dev, msg, 2)); 756 } 757 758 static int 759 axp8xx_regnode_init(struct regnode *regnode) 760 { 761 struct axp8xx_reg_sc *sc; 762 struct regnode_std_param *param; 763 int rv, udelay; 764 765 sc = regnode_get_softc(regnode); 766 param = regnode_get_stdparam(regnode); 767 if (param->min_uvolt == 0) 768 return (0); 769 770 /* 771 * Set the regulator at the correct voltage 772 * Do not enable it, this is will be done either by a 773 * consumer or by regnode_set_constraint if boot_on is true 774 */ 775 rv = axp8xx_regnode_set_voltage(regnode, param->min_uvolt, 776 param->max_uvolt, &udelay); 777 if (rv != 0) 778 DELAY(udelay); 779 780 return (rv); 781 } 782 783 static int 784 axp8xx_regnode_enable(struct regnode *regnode, bool enable, int *udelay) 785 { 786 struct axp8xx_reg_sc *sc; 787 uint8_t val; 788 789 sc = regnode_get_softc(regnode); 790 791 if (bootverbose) 792 device_printf(sc->base_dev, "%sable %s (%s)\n", 793 enable ? "En" : "Dis", 794 regnode_get_name(regnode), 795 sc->def->name); 796 797 axp8xx_read(sc->base_dev, sc->def->enable_reg, &val, 1); 798 val &= ~sc->def->enable_mask; 799 if (enable) 800 val |= sc->def->enable_value; 801 else { 802 if (sc->def->disable_value) 803 val |= sc->def->disable_value; 804 else 805 val &= ~sc->def->enable_value; 806 } 807 axp8xx_write(sc->base_dev, sc->def->enable_reg, val); 808 809 *udelay = 0; 810 811 return (0); 812 } 813 814 static void 815 axp8xx_regnode_reg_to_voltage(struct axp8xx_reg_sc *sc, uint8_t val, int *uv) 816 { 817 if (val < sc->def->voltage_nstep1) 818 *uv = sc->def->voltage_min + val * sc->def->voltage_step1; 819 else 820 *uv = sc->def->voltage_min + 821 (sc->def->voltage_nstep1 * sc->def->voltage_step1) + 822 ((val - sc->def->voltage_nstep1) * sc->def->voltage_step2); 823 *uv *= 1000; 824 } 825 826 static int 827 axp8xx_regnode_voltage_to_reg(struct axp8xx_reg_sc *sc, int min_uvolt, 828 int max_uvolt, uint8_t *val) 829 { 830 uint8_t nval; 831 int nstep, uvolt; 832 833 nval = 0; 834 uvolt = sc->def->voltage_min * 1000; 835 836 for (nstep = 0; nstep < sc->def->voltage_nstep1 && uvolt < min_uvolt; 837 nstep++) { 838 ++nval; 839 uvolt += (sc->def->voltage_step1 * 1000); 840 } 841 for (nstep = 0; nstep < sc->def->voltage_nstep2 && uvolt < min_uvolt; 842 nstep++) { 843 ++nval; 844 uvolt += (sc->def->voltage_step2 * 1000); 845 } 846 if (uvolt > max_uvolt) 847 return (EINVAL); 848 849 *val = nval; 850 return (0); 851 } 852 853 static int 854 axp8xx_regnode_set_voltage(struct regnode *regnode, int min_uvolt, 855 int max_uvolt, int *udelay) 856 { 857 struct axp8xx_reg_sc *sc; 858 uint8_t val; 859 860 sc = regnode_get_softc(regnode); 861 862 if (bootverbose) 863 device_printf(sc->base_dev, "Setting %s (%s) to %d<->%d\n", 864 regnode_get_name(regnode), 865 sc->def->name, 866 min_uvolt, max_uvolt); 867 868 if (sc->def->voltage_step1 == 0) 869 return (ENXIO); 870 871 if (axp8xx_regnode_voltage_to_reg(sc, min_uvolt, max_uvolt, &val) != 0) 872 return (ERANGE); 873 874 axp8xx_write(sc->base_dev, sc->def->voltage_reg, val); 875 876 *udelay = 0; 877 878 return (0); 879 } 880 881 static int 882 axp8xx_regnode_get_voltage(struct regnode *regnode, int *uvolt) 883 { 884 struct axp8xx_reg_sc *sc; 885 uint8_t val; 886 887 sc = regnode_get_softc(regnode); 888 889 if (!sc->def->voltage_step1 || !sc->def->voltage_step2) 890 return (ENXIO); 891 892 axp8xx_read(sc->base_dev, sc->def->voltage_reg, &val, 1); 893 axp8xx_regnode_reg_to_voltage(sc, val & AXP_VOLTCTL_MASK, uvolt); 894 895 return (0); 896 } 897 898 static regnode_method_t axp8xx_regnode_methods[] = { 899 /* Regulator interface */ 900 REGNODEMETHOD(regnode_init, axp8xx_regnode_init), 901 REGNODEMETHOD(regnode_enable, axp8xx_regnode_enable), 902 REGNODEMETHOD(regnode_set_voltage, axp8xx_regnode_set_voltage), 903 REGNODEMETHOD(regnode_get_voltage, axp8xx_regnode_get_voltage), 904 REGNODEMETHOD(regnode_check_voltage, regnode_method_check_voltage), 905 REGNODEMETHOD_END 906 }; 907 DEFINE_CLASS_1(axp8xx_regnode, axp8xx_regnode_class, axp8xx_regnode_methods, 908 sizeof(struct axp8xx_reg_sc), regnode_class); 909 910 static void 911 axp8xx_shutdown(void *devp, int howto) 912 { 913 device_t dev; 914 915 if ((howto & RB_POWEROFF) == 0) 916 return; 917 918 dev = devp; 919 920 if (bootverbose) 921 device_printf(dev, "Shutdown Axp8xx\n"); 922 923 axp8xx_write(dev, AXP_POWERBAT, AXP_POWERBAT_SHUTDOWN); 924 } 925 926 static int 927 axp8xx_sysctl_chargecurrent(SYSCTL_HANDLER_ARGS) 928 { 929 device_t dev = arg1; 930 uint8_t data; 931 int val, error; 932 933 error = axp8xx_read(dev, AXP_CHARGERCTL1, &data, 1); 934 if (error != 0) 935 return (error); 936 937 if (bootverbose) 938 device_printf(dev, "Raw CHARGECTL1 val: 0x%0x\n", data); 939 val = (data & AXP_CHARGERCTL1_CMASK); 940 error = sysctl_handle_int(oidp, &val, 0, req); 941 if (error || !req->newptr) /* error || read request */ 942 return (error); 943 944 if ((val < AXP_CHARGERCTL1_MIN) || (val > AXP_CHARGERCTL1_MAX)) 945 return (EINVAL); 946 947 val |= (data & (AXP_CHARGERCTL1_CMASK << 4)); 948 axp8xx_write(dev, AXP_CHARGERCTL1, val); 949 950 return (0); 951 } 952 953 static int 954 axp8xx_sysctl(SYSCTL_HANDLER_ARGS) 955 { 956 struct axp8xx_softc *sc; 957 device_t dev = arg1; 958 enum axp8xx_sensor sensor = arg2; 959 const struct axp8xx_config *c; 960 uint8_t data; 961 int val, i, found, batt_val; 962 uint8_t lo, hi; 963 964 sc = device_get_softc(dev); 965 c = sc->config; 966 967 for (found = 0, i = 0; i < sc->nsensors; i++) { 968 if (sc->sensors[i].id == sensor) { 969 found = 1; 970 break; 971 } 972 } 973 974 if (found == 0) 975 return (ENOENT); 976 977 switch (sensor) { 978 case AXP_SENSOR_ACIN_PRESENT: 979 if (axp8xx_read(dev, AXP_POWERSRC, &data, 1) == 0) 980 val = !!(data & AXP_POWERSRC_ACIN); 981 break; 982 case AXP_SENSOR_VBUS_PRESENT: 983 if (axp8xx_read(dev, AXP_POWERSRC, &data, 1) == 0) 984 val = !!(data & AXP_POWERSRC_VBUS); 985 break; 986 case AXP_SENSOR_BATT_PRESENT: 987 if (axp8xx_read(dev, AXP_POWERMODE, &data, 1) == 0) { 988 if (data & AXP_POWERMODE_BAT_VALID) 989 val = !!(data & AXP_POWERMODE_BAT_PRESENT); 990 } 991 break; 992 case AXP_SENSOR_BATT_CHARGING: 993 if (axp8xx_read(dev, AXP_POWERMODE, &data, 1) == 0) 994 val = !!(data & AXP_POWERMODE_BAT_CHARGING); 995 break; 996 case AXP_SENSOR_BATT_CHARGE_STATE: 997 if (axp8xx_read(dev, AXP_BAT_CAP, &data, 1) == 0 && 998 (data & AXP_BAT_CAP_VALID) != 0) { 999 batt_val = (data & AXP_BAT_CAP_PERCENT); 1000 if (batt_val <= sc->shut_thres) 1001 val = BATT_CAPACITY_CRITICAL; 1002 else if (batt_val <= sc->warn_thres) 1003 val = BATT_CAPACITY_WARNING; 1004 else 1005 val = BATT_CAPACITY_NORMAL; 1006 } 1007 break; 1008 case AXP_SENSOR_BATT_CAPACITY_PERCENT: 1009 if (axp8xx_read(dev, AXP_BAT_CAP, &data, 1) == 0 && 1010 (data & AXP_BAT_CAP_VALID) != 0) 1011 val = (data & AXP_BAT_CAP_PERCENT); 1012 break; 1013 case AXP_SENSOR_BATT_VOLTAGE: 1014 if (axp8xx_read(dev, AXP_BATSENSE_HI, &hi, 1) == 0 && 1015 axp8xx_read(dev, AXP_BATSENSE_LO, &lo, 1) == 0) { 1016 val = (AXP_SENSOR_BAT_H(hi) | AXP_SENSOR_BAT_L(lo)); 1017 val *= c->batsense_step; 1018 } 1019 break; 1020 case AXP_SENSOR_BATT_CHARGE_CURRENT: 1021 if (axp8xx_read(dev, AXP_POWERSRC, &data, 1) == 0 && 1022 (data & AXP_POWERSRC_CHARING) != 0 && 1023 axp8xx_read(dev, AXP_BATCHG_HI, &hi, 1) == 0 && 1024 axp8xx_read(dev, AXP_BATCHG_LO, &lo, 1) == 0) { 1025 val = (AXP_SENSOR_BAT_H(hi) | AXP_SENSOR_BAT_L(lo)); 1026 val *= c->charge_step; 1027 } 1028 break; 1029 case AXP_SENSOR_BATT_DISCHARGE_CURRENT: 1030 if (axp8xx_read(dev, AXP_POWERSRC, &data, 1) == 0 && 1031 (data & AXP_POWERSRC_CHARING) == 0 && 1032 axp8xx_read(dev, AXP_BATDISCHG_HI, &hi, 1) == 0 && 1033 axp8xx_read(dev, AXP_BATDISCHG_LO, &lo, 1) == 0) { 1034 val = (AXP_SENSOR_BAT_H(hi) | AXP_SENSOR_BAT_L(lo)); 1035 val *= c->discharge_step; 1036 } 1037 break; 1038 case AXP_SENSOR_BATT_MAXIMUM_CAPACITY: 1039 if (axp8xx_read(dev, AXP_BAT_MAX_CAP_HI, &hi, 1) == 0 && 1040 axp8xx_read(dev, AXP_BAT_MAX_CAP_LO, &lo, 1) == 0) { 1041 val = AXP_SENSOR_COULOMB(hi, lo); 1042 val *= c->maxcap_step; 1043 } 1044 break; 1045 case AXP_SENSOR_BATT_CURRENT_CAPACITY: 1046 if (axp8xx_read(dev, AXP_BAT_COULOMB_HI, &hi, 1) == 0 && 1047 axp8xx_read(dev, AXP_BAT_COULOMB_LO, &lo, 1) == 0) { 1048 val = AXP_SENSOR_COULOMB(hi, lo); 1049 val *= c->coulomb_step; 1050 } 1051 break; 1052 } 1053 1054 return sysctl_handle_opaque(oidp, &val, sizeof(val), req); 1055 } 1056 1057 static void 1058 axp8xx_intr(void *arg) 1059 { 1060 device_t dev; 1061 uint8_t val; 1062 int error; 1063 1064 dev = arg; 1065 1066 error = axp8xx_read(dev, AXP_IRQSTAT1, &val, 1); 1067 if (error != 0) 1068 return; 1069 1070 if (val) { 1071 if (bootverbose) 1072 device_printf(dev, "AXP_IRQSTAT1 val: %x\n", val); 1073 if (val & AXP_IRQSTAT1_ACIN_HI) 1074 devctl_notify("PMU", "AC", "plugged", NULL); 1075 if (val & AXP_IRQSTAT1_ACIN_LO) 1076 devctl_notify("PMU", "AC", "unplugged", NULL); 1077 if (val & AXP_IRQSTAT1_VBUS_HI) 1078 devctl_notify("PMU", "USB", "plugged", NULL); 1079 if (val & AXP_IRQSTAT1_VBUS_LO) 1080 devctl_notify("PMU", "USB", "unplugged", NULL); 1081 /* Acknowledge */ 1082 axp8xx_write(dev, AXP_IRQSTAT1, val); 1083 } 1084 1085 error = axp8xx_read(dev, AXP_IRQSTAT2, &val, 1); 1086 if (error != 0) 1087 return; 1088 1089 if (val) { 1090 if (bootverbose) 1091 device_printf(dev, "AXP_IRQSTAT2 val: %x\n", val); 1092 if (val & AXP_IRQSTAT2_BATCHGD) 1093 devctl_notify("PMU", "Battery", "charged", NULL); 1094 if (val & AXP_IRQSTAT2_BATCHGC) 1095 devctl_notify("PMU", "Battery", "charging", NULL); 1096 if (val & AXP_IRQSTAT2_BAT_NO) 1097 devctl_notify("PMU", "Battery", "absent", NULL); 1098 if (val & AXP_IRQSTAT2_BAT_IN) 1099 devctl_notify("PMU", "Battery", "plugged", NULL); 1100 /* Acknowledge */ 1101 axp8xx_write(dev, AXP_IRQSTAT2, val); 1102 } 1103 1104 error = axp8xx_read(dev, AXP_IRQSTAT3, &val, 1); 1105 if (error != 0) 1106 return; 1107 1108 if (val) { 1109 /* Acknowledge */ 1110 axp8xx_write(dev, AXP_IRQSTAT3, val); 1111 } 1112 1113 error = axp8xx_read(dev, AXP_IRQSTAT4, &val, 1); 1114 if (error != 0) 1115 return; 1116 1117 if (val) { 1118 if (bootverbose) 1119 device_printf(dev, "AXP_IRQSTAT4 val: %x\n", val); 1120 if (val & AXP_IRQSTAT4_BATLVL_LO0) 1121 devctl_notify("PMU", "Battery", "shutdown-threshold", NULL); 1122 if (val & AXP_IRQSTAT4_BATLVL_LO1) 1123 devctl_notify("PMU", "Battery", "warning-threshold", NULL); 1124 /* Acknowledge */ 1125 axp8xx_write(dev, AXP_IRQSTAT4, val); 1126 } 1127 1128 error = axp8xx_read(dev, AXP_IRQSTAT5, &val, 1); 1129 if (error != 0) 1130 return; 1131 1132 if (val != 0) { 1133 if ((val & AXP_IRQSTAT5_POKSIRQ) != 0) { 1134 if (bootverbose) 1135 device_printf(dev, "Power button pressed\n"); 1136 shutdown_nice(RB_POWEROFF); 1137 } 1138 /* Acknowledge */ 1139 axp8xx_write(dev, AXP_IRQSTAT5, val); 1140 } 1141 1142 error = axp8xx_read(dev, AXP_IRQSTAT6, &val, 1); 1143 if (error != 0) 1144 return; 1145 1146 if (val) { 1147 /* Acknowledge */ 1148 axp8xx_write(dev, AXP_IRQSTAT6, val); 1149 } 1150 } 1151 1152 static device_t 1153 axp8xx_gpio_get_bus(device_t dev) 1154 { 1155 struct axp8xx_softc *sc; 1156 1157 sc = device_get_softc(dev); 1158 1159 return (sc->gpiodev); 1160 } 1161 1162 static int 1163 axp8xx_gpio_pin_max(device_t dev, int *maxpin) 1164 { 1165 *maxpin = nitems(axp8xx_pins) - 1; 1166 1167 return (0); 1168 } 1169 1170 static int 1171 axp8xx_gpio_pin_getname(device_t dev, uint32_t pin, char *name) 1172 { 1173 if (pin >= nitems(axp8xx_pins)) 1174 return (EINVAL); 1175 1176 snprintf(name, GPIOMAXNAME, "%s", axp8xx_pins[pin].name); 1177 1178 return (0); 1179 } 1180 1181 static int 1182 axp8xx_gpio_pin_getcaps(device_t dev, uint32_t pin, uint32_t *caps) 1183 { 1184 if (pin >= nitems(axp8xx_pins)) 1185 return (EINVAL); 1186 1187 *caps = GPIO_PIN_INPUT | GPIO_PIN_OUTPUT; 1188 1189 return (0); 1190 } 1191 1192 static int 1193 axp8xx_gpio_pin_getflags(device_t dev, uint32_t pin, uint32_t *flags) 1194 { 1195 struct axp8xx_softc *sc; 1196 uint8_t data, func; 1197 int error; 1198 1199 if (pin >= nitems(axp8xx_pins)) 1200 return (EINVAL); 1201 1202 sc = device_get_softc(dev); 1203 1204 AXP_LOCK(sc); 1205 error = axp8xx_read(dev, axp8xx_pins[pin].ctrl_reg, &data, 1); 1206 if (error == 0) { 1207 func = (data & AXP_GPIO_FUNC) >> AXP_GPIO_FUNC_SHIFT; 1208 if (func == AXP_GPIO_FUNC_INPUT) 1209 *flags = GPIO_PIN_INPUT; 1210 else if (func == AXP_GPIO_FUNC_DRVLO || 1211 func == AXP_GPIO_FUNC_DRVHI) 1212 *flags = GPIO_PIN_OUTPUT; 1213 else 1214 *flags = 0; 1215 } 1216 AXP_UNLOCK(sc); 1217 1218 return (error); 1219 } 1220 1221 static int 1222 axp8xx_gpio_pin_setflags(device_t dev, uint32_t pin, uint32_t flags) 1223 { 1224 struct axp8xx_softc *sc; 1225 uint8_t data; 1226 int error; 1227 1228 if (pin >= nitems(axp8xx_pins)) 1229 return (EINVAL); 1230 1231 sc = device_get_softc(dev); 1232 1233 AXP_LOCK(sc); 1234 error = axp8xx_read(dev, axp8xx_pins[pin].ctrl_reg, &data, 1); 1235 if (error == 0) { 1236 data &= ~AXP_GPIO_FUNC; 1237 if ((flags & (GPIO_PIN_INPUT|GPIO_PIN_OUTPUT)) != 0) { 1238 if ((flags & GPIO_PIN_OUTPUT) == 0) 1239 data |= AXP_GPIO_FUNC_INPUT; 1240 } 1241 error = axp8xx_write(dev, axp8xx_pins[pin].ctrl_reg, data); 1242 } 1243 AXP_UNLOCK(sc); 1244 1245 return (error); 1246 } 1247 1248 static int 1249 axp8xx_gpio_pin_get(device_t dev, uint32_t pin, unsigned int *val) 1250 { 1251 struct axp8xx_softc *sc; 1252 uint8_t data, func; 1253 int error; 1254 1255 if (pin >= nitems(axp8xx_pins)) 1256 return (EINVAL); 1257 1258 sc = device_get_softc(dev); 1259 1260 AXP_LOCK(sc); 1261 error = axp8xx_read(dev, axp8xx_pins[pin].ctrl_reg, &data, 1); 1262 if (error == 0) { 1263 func = (data & AXP_GPIO_FUNC) >> AXP_GPIO_FUNC_SHIFT; 1264 switch (func) { 1265 case AXP_GPIO_FUNC_DRVLO: 1266 *val = 0; 1267 break; 1268 case AXP_GPIO_FUNC_DRVHI: 1269 *val = 1; 1270 break; 1271 case AXP_GPIO_FUNC_INPUT: 1272 error = axp8xx_read(dev, AXP_GPIO_SIGBIT, &data, 1); 1273 if (error == 0) 1274 *val = (data & (1 << pin)) ? 1 : 0; 1275 break; 1276 default: 1277 error = EIO; 1278 break; 1279 } 1280 } 1281 AXP_UNLOCK(sc); 1282 1283 return (error); 1284 } 1285 1286 static int 1287 axp8xx_gpio_pin_set(device_t dev, uint32_t pin, unsigned int val) 1288 { 1289 struct axp8xx_softc *sc; 1290 uint8_t data, func; 1291 int error; 1292 1293 if (pin >= nitems(axp8xx_pins)) 1294 return (EINVAL); 1295 1296 sc = device_get_softc(dev); 1297 1298 AXP_LOCK(sc); 1299 error = axp8xx_read(dev, axp8xx_pins[pin].ctrl_reg, &data, 1); 1300 if (error == 0) { 1301 func = (data & AXP_GPIO_FUNC) >> AXP_GPIO_FUNC_SHIFT; 1302 switch (func) { 1303 case AXP_GPIO_FUNC_DRVLO: 1304 case AXP_GPIO_FUNC_DRVHI: 1305 data &= ~AXP_GPIO_FUNC; 1306 data |= (val << AXP_GPIO_FUNC_SHIFT); 1307 break; 1308 default: 1309 error = EIO; 1310 break; 1311 } 1312 } 1313 if (error == 0) 1314 error = axp8xx_write(dev, axp8xx_pins[pin].ctrl_reg, data); 1315 AXP_UNLOCK(sc); 1316 1317 return (error); 1318 } 1319 1320 static int 1321 axp8xx_gpio_pin_toggle(device_t dev, uint32_t pin) 1322 { 1323 struct axp8xx_softc *sc; 1324 uint8_t data, func; 1325 int error; 1326 1327 if (pin >= nitems(axp8xx_pins)) 1328 return (EINVAL); 1329 1330 sc = device_get_softc(dev); 1331 1332 AXP_LOCK(sc); 1333 error = axp8xx_read(dev, axp8xx_pins[pin].ctrl_reg, &data, 1); 1334 if (error == 0) { 1335 func = (data & AXP_GPIO_FUNC) >> AXP_GPIO_FUNC_SHIFT; 1336 switch (func) { 1337 case AXP_GPIO_FUNC_DRVLO: 1338 data &= ~AXP_GPIO_FUNC; 1339 data |= (AXP_GPIO_FUNC_DRVHI << AXP_GPIO_FUNC_SHIFT); 1340 break; 1341 case AXP_GPIO_FUNC_DRVHI: 1342 data &= ~AXP_GPIO_FUNC; 1343 data |= (AXP_GPIO_FUNC_DRVLO << AXP_GPIO_FUNC_SHIFT); 1344 break; 1345 default: 1346 error = EIO; 1347 break; 1348 } 1349 } 1350 if (error == 0) 1351 error = axp8xx_write(dev, axp8xx_pins[pin].ctrl_reg, data); 1352 AXP_UNLOCK(sc); 1353 1354 return (error); 1355 } 1356 1357 static int 1358 axp8xx_gpio_map_gpios(device_t bus, phandle_t dev, phandle_t gparent, 1359 int gcells, pcell_t *gpios, uint32_t *pin, uint32_t *flags) 1360 { 1361 if (gpios[0] >= nitems(axp8xx_pins)) 1362 return (EINVAL); 1363 1364 *pin = gpios[0]; 1365 *flags = gpios[1]; 1366 1367 return (0); 1368 } 1369 1370 static phandle_t 1371 axp8xx_get_node(device_t dev, device_t bus) 1372 { 1373 return (ofw_bus_get_node(dev)); 1374 } 1375 1376 static struct axp8xx_reg_sc * 1377 axp8xx_reg_attach(device_t dev, phandle_t node, 1378 struct axp8xx_regdef *def) 1379 { 1380 struct axp8xx_reg_sc *reg_sc; 1381 struct regnode_init_def initdef; 1382 struct regnode *regnode; 1383 1384 memset(&initdef, 0, sizeof(initdef)); 1385 if (regulator_parse_ofw_stdparam(dev, node, &initdef) != 0) 1386 return (NULL); 1387 if (initdef.std_param.min_uvolt == 0) 1388 initdef.std_param.min_uvolt = def->voltage_min * 1000; 1389 if (initdef.std_param.max_uvolt == 0) 1390 initdef.std_param.max_uvolt = def->voltage_max * 1000; 1391 initdef.id = def->id; 1392 initdef.ofw_node = node; 1393 regnode = regnode_create(dev, &axp8xx_regnode_class, &initdef); 1394 if (regnode == NULL) { 1395 device_printf(dev, "cannot create regulator\n"); 1396 return (NULL); 1397 } 1398 1399 reg_sc = regnode_get_softc(regnode); 1400 reg_sc->regnode = regnode; 1401 reg_sc->base_dev = dev; 1402 reg_sc->def = def; 1403 reg_sc->xref = OF_xref_from_node(node); 1404 reg_sc->param = regnode_get_stdparam(regnode); 1405 1406 regnode_register(regnode); 1407 1408 return (reg_sc); 1409 } 1410 1411 static int 1412 axp8xx_regdev_map(device_t dev, phandle_t xref, int ncells, pcell_t *cells, 1413 intptr_t *num) 1414 { 1415 struct axp8xx_softc *sc; 1416 int i; 1417 1418 sc = device_get_softc(dev); 1419 for (i = 0; i < sc->nregs; i++) { 1420 if (sc->regs[i] == NULL) 1421 continue; 1422 if (sc->regs[i]->xref == xref) { 1423 *num = sc->regs[i]->def->id; 1424 return (0); 1425 } 1426 } 1427 1428 return (ENXIO); 1429 } 1430 1431 static int 1432 axp8xx_probe(device_t dev) 1433 { 1434 if (!ofw_bus_status_okay(dev)) 1435 return (ENXIO); 1436 1437 switch (ofw_bus_search_compatible(dev, compat_data)->ocd_data) 1438 { 1439 case AXP803: 1440 device_set_desc(dev, "X-Powers AXP803 Power Management Unit"); 1441 break; 1442 case AXP813: 1443 device_set_desc(dev, "X-Powers AXP813 Power Management Unit"); 1444 break; 1445 default: 1446 return (ENXIO); 1447 } 1448 1449 return (BUS_PROBE_DEFAULT); 1450 } 1451 1452 static int 1453 axp8xx_attach(device_t dev) 1454 { 1455 struct axp8xx_softc *sc; 1456 struct axp8xx_reg_sc *reg; 1457 uint8_t chip_id, val; 1458 phandle_t rnode, child; 1459 int error, i; 1460 1461 sc = device_get_softc(dev); 1462 1463 sc->addr = iicbus_get_addr(dev); 1464 mtx_init(&sc->mtx, device_get_nameunit(dev), NULL, MTX_DEF); 1465 1466 error = bus_alloc_resources(dev, axp8xx_spec, &sc->res); 1467 if (error != 0) { 1468 device_printf(dev, "cannot allocate resources for device\n"); 1469 return (error); 1470 } 1471 1472 if (bootverbose) { 1473 axp8xx_read(dev, AXP_ICTYPE, &chip_id, 1); 1474 device_printf(dev, "chip ID 0x%02x\n", chip_id); 1475 } 1476 1477 sc->nregs = nitems(axp8xx_common_regdefs); 1478 sc->type = ofw_bus_search_compatible(dev, compat_data)->ocd_data; 1479 switch (sc->type) { 1480 case AXP803: 1481 sc->nregs += nitems(axp803_regdefs); 1482 break; 1483 case AXP813: 1484 sc->nregs += nitems(axp813_regdefs); 1485 break; 1486 } 1487 sc->config = &axp803_config; 1488 sc->sensors = axp8xx_common_sensors; 1489 sc->nsensors = nitems(axp8xx_common_sensors); 1490 1491 sc->regs = malloc(sizeof(struct axp8xx_reg_sc *) * sc->nregs, 1492 M_AXP8XX_REG, M_WAITOK | M_ZERO); 1493 1494 /* Attach known regulators that exist in the DT */ 1495 rnode = ofw_bus_find_child(ofw_bus_get_node(dev), "regulators"); 1496 if (rnode > 0) { 1497 for (i = 0; i < sc->nregs; i++) { 1498 char *regname; 1499 struct axp8xx_regdef *regdef; 1500 1501 if (i <= nitems(axp8xx_common_regdefs)) { 1502 regname = axp8xx_common_regdefs[i].name; 1503 regdef = &axp8xx_common_regdefs[i]; 1504 } else { 1505 int off; 1506 1507 off = i - nitems(axp8xx_common_regdefs); 1508 switch (sc->type) { 1509 case AXP803: 1510 regname = axp803_regdefs[off].name; 1511 regdef = &axp803_regdefs[off]; 1512 break; 1513 case AXP813: 1514 regname = axp813_regdefs[off].name; 1515 regdef = &axp813_regdefs[off]; 1516 break; 1517 } 1518 } 1519 child = ofw_bus_find_child(rnode, 1520 regname); 1521 if (child == 0) 1522 continue; 1523 reg = axp8xx_reg_attach(dev, child, 1524 regdef); 1525 if (reg == NULL) { 1526 device_printf(dev, 1527 "cannot attach regulator %s\n", 1528 regname); 1529 continue; 1530 } 1531 sc->regs[i] = reg; 1532 } 1533 } 1534 1535 /* Add sensors */ 1536 for (i = 0; i < sc->nsensors; i++) { 1537 SYSCTL_ADD_PROC(device_get_sysctl_ctx(dev), 1538 SYSCTL_CHILDREN(device_get_sysctl_tree(dev)), 1539 OID_AUTO, sc->sensors[i].name, 1540 CTLTYPE_INT | CTLFLAG_RD | CTLFLAG_NEEDGIANT, 1541 dev, sc->sensors[i].id, axp8xx_sysctl, 1542 sc->sensors[i].format, 1543 sc->sensors[i].desc); 1544 } 1545 SYSCTL_ADD_PROC(device_get_sysctl_ctx(dev), 1546 SYSCTL_CHILDREN(device_get_sysctl_tree(dev)), 1547 OID_AUTO, "batchargecurrentstep", 1548 CTLTYPE_INT | CTLFLAG_RW | CTLFLAG_NEEDGIANT, 1549 dev, 0, axp8xx_sysctl_chargecurrent, 1550 "I", "Battery Charging Current Step, " 1551 "0: 200mA, 1: 400mA, 2: 600mA, 3: 800mA, " 1552 "4: 1000mA, 5: 1200mA, 6: 1400mA, 7: 1600mA, " 1553 "8: 1800mA, 9: 2000mA, 10: 2200mA, 11: 2400mA, " 1554 "12: 2600mA, 13: 2800mA"); 1555 1556 /* Get thresholds */ 1557 if (axp8xx_read(dev, AXP_BAT_CAP_WARN, &val, 1) == 0) { 1558 sc->warn_thres = (val & AXP_BAT_CAP_WARN_LV1) >> 4; 1559 sc->warn_thres += AXP_BAP_CAP_WARN_LV1BASE; 1560 sc->shut_thres = (val & AXP_BAT_CAP_WARN_LV2); 1561 if (bootverbose) { 1562 device_printf(dev, 1563 "Raw reg val: 0x%02x\n", val); 1564 device_printf(dev, 1565 "Warning threshold: 0x%02x\n", sc->warn_thres); 1566 device_printf(dev, 1567 "Shutdown threshold: 0x%02x\n", sc->shut_thres); 1568 } 1569 } 1570 1571 /* Enable interrupts */ 1572 axp8xx_write(dev, AXP_IRQEN1, 1573 AXP_IRQEN1_VBUS_LO | 1574 AXP_IRQEN1_VBUS_HI | 1575 AXP_IRQEN1_ACIN_LO | 1576 AXP_IRQEN1_ACIN_HI); 1577 axp8xx_write(dev, AXP_IRQEN2, 1578 AXP_IRQEN2_BATCHGD | 1579 AXP_IRQEN2_BATCHGC | 1580 AXP_IRQEN2_BAT_NO | 1581 AXP_IRQEN2_BAT_IN); 1582 axp8xx_write(dev, AXP_IRQEN3, 0); 1583 axp8xx_write(dev, AXP_IRQEN4, 1584 AXP_IRQEN4_BATLVL_LO0 | 1585 AXP_IRQEN4_BATLVL_LO1); 1586 axp8xx_write(dev, AXP_IRQEN5, 1587 AXP_IRQEN5_POKSIRQ | 1588 AXP_IRQEN5_POKLIRQ); 1589 axp8xx_write(dev, AXP_IRQEN6, 0); 1590 1591 /* Install interrupt handler */ 1592 error = bus_setup_intr(dev, sc->res, INTR_TYPE_MISC | INTR_MPSAFE, 1593 NULL, axp8xx_intr, dev, &sc->ih); 1594 if (error != 0) { 1595 device_printf(dev, "cannot setup interrupt handler\n"); 1596 return (error); 1597 } 1598 1599 EVENTHANDLER_REGISTER(shutdown_final, axp8xx_shutdown, dev, 1600 SHUTDOWN_PRI_LAST); 1601 1602 sc->gpiodev = gpiobus_attach_bus(dev); 1603 1604 return (0); 1605 } 1606 1607 static device_method_t axp8xx_methods[] = { 1608 /* Device interface */ 1609 DEVMETHOD(device_probe, axp8xx_probe), 1610 DEVMETHOD(device_attach, axp8xx_attach), 1611 1612 /* GPIO interface */ 1613 DEVMETHOD(gpio_get_bus, axp8xx_gpio_get_bus), 1614 DEVMETHOD(gpio_pin_max, axp8xx_gpio_pin_max), 1615 DEVMETHOD(gpio_pin_getname, axp8xx_gpio_pin_getname), 1616 DEVMETHOD(gpio_pin_getcaps, axp8xx_gpio_pin_getcaps), 1617 DEVMETHOD(gpio_pin_getflags, axp8xx_gpio_pin_getflags), 1618 DEVMETHOD(gpio_pin_setflags, axp8xx_gpio_pin_setflags), 1619 DEVMETHOD(gpio_pin_get, axp8xx_gpio_pin_get), 1620 DEVMETHOD(gpio_pin_set, axp8xx_gpio_pin_set), 1621 DEVMETHOD(gpio_pin_toggle, axp8xx_gpio_pin_toggle), 1622 DEVMETHOD(gpio_map_gpios, axp8xx_gpio_map_gpios), 1623 1624 /* Regdev interface */ 1625 DEVMETHOD(regdev_map, axp8xx_regdev_map), 1626 1627 /* OFW bus interface */ 1628 DEVMETHOD(ofw_bus_get_node, axp8xx_get_node), 1629 1630 DEVMETHOD_END 1631 }; 1632 1633 static driver_t axp8xx_driver = { 1634 "axp8xx_pmu", 1635 axp8xx_methods, 1636 sizeof(struct axp8xx_softc), 1637 }; 1638 1639 static devclass_t axp8xx_devclass; 1640 extern devclass_t ofwgpiobus_devclass, gpioc_devclass; 1641 extern driver_t ofw_gpiobus_driver, gpioc_driver; 1642 1643 EARLY_DRIVER_MODULE(axp8xx, iicbus, axp8xx_driver, axp8xx_devclass, 0, 0, 1644 BUS_PASS_INTERRUPT + BUS_PASS_ORDER_LAST); 1645 EARLY_DRIVER_MODULE(ofw_gpiobus, axp8xx_pmu, ofw_gpiobus_driver, 1646 ofwgpiobus_devclass, 0, 0, BUS_PASS_INTERRUPT + BUS_PASS_ORDER_LAST); 1647 DRIVER_MODULE(gpioc, axp8xx_pmu, gpioc_driver, gpioc_devclass, 0, 0); 1648 MODULE_VERSION(axp8xx, 1); 1649 MODULE_DEPEND(axp8xx, iicbus, 1, 1, 1); 1650 SIMPLEBUS_PNP_INFO(compat_data); 1651