1 /*- 2 * Copyright (c) 2016 Jared McNeill <jmcneill@invisible.ca> 3 * 4 * Redistribution and use in source and binary forms, with or without 5 * modification, are permitted provided that the following conditions 6 * are met: 7 * 1. Redistributions of source code must retain the above copyright 8 * notice, this list of conditions and the following disclaimer. 9 * 2. Redistributions in binary form must reproduce the above copyright 10 * notice, this list of conditions and the following disclaimer in the 11 * documentation and/or other materials provided with the distribution. 12 * 13 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 14 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 15 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 16 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 17 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, 18 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 19 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED 20 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, 21 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 22 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 23 * SUCH DAMAGE. 24 */ 25 26 /* 27 * Allwinner USB PHY 28 */ 29 30 #include <sys/param.h> 31 #include <sys/systm.h> 32 #include <sys/bus.h> 33 #include <sys/rman.h> 34 #include <sys/kernel.h> 35 #include <sys/module.h> 36 #include <sys/gpio.h> 37 #include <machine/bus.h> 38 39 #include <dev/ofw/ofw_bus.h> 40 #include <dev/ofw/ofw_bus_subr.h> 41 #include <dev/gpio/gpiobusvar.h> 42 43 #include <dev/extres/clk/clk.h> 44 #include <dev/extres/hwreset/hwreset.h> 45 #include <dev/extres/regulator/regulator.h> 46 #include <dev/extres/phy/phy_usb.h> 47 48 #include "phynode_if.h" 49 50 enum awusbphy_type { 51 AWUSBPHY_TYPE_A10 = 1, 52 AWUSBPHY_TYPE_A13, 53 AWUSBPHY_TYPE_A20, 54 AWUSBPHY_TYPE_A31, 55 AWUSBPHY_TYPE_H3, 56 AWUSBPHY_TYPE_A64, 57 AWUSBPHY_TYPE_A83T, 58 AWUSBPHY_TYPE_H6, 59 }; 60 61 struct aw_usbphy_conf { 62 int num_phys; 63 enum awusbphy_type phy_type; 64 bool pmu_unk1; 65 bool phy0_route; 66 }; 67 68 static const struct aw_usbphy_conf a10_usbphy_conf = { 69 .num_phys = 3, 70 .phy_type = AWUSBPHY_TYPE_A10, 71 .pmu_unk1 = false, 72 .phy0_route = false, 73 }; 74 75 static const struct aw_usbphy_conf a13_usbphy_conf = { 76 .num_phys = 2, 77 .phy_type = AWUSBPHY_TYPE_A13, 78 .pmu_unk1 = false, 79 .phy0_route = false, 80 }; 81 82 static const struct aw_usbphy_conf a20_usbphy_conf = { 83 .num_phys = 3, 84 .phy_type = AWUSBPHY_TYPE_A20, 85 .pmu_unk1 = false, 86 .phy0_route = false, 87 }; 88 89 static const struct aw_usbphy_conf a31_usbphy_conf = { 90 .num_phys = 3, 91 .phy_type = AWUSBPHY_TYPE_A31, 92 .pmu_unk1 = false, 93 .phy0_route = false, 94 }; 95 96 static const struct aw_usbphy_conf h3_usbphy_conf = { 97 .num_phys = 4, 98 .phy_type = AWUSBPHY_TYPE_H3, 99 .pmu_unk1 = true, 100 .phy0_route = true, 101 }; 102 103 static const struct aw_usbphy_conf a64_usbphy_conf = { 104 .num_phys = 2, 105 .phy_type = AWUSBPHY_TYPE_A64, 106 .pmu_unk1 = true, 107 .phy0_route = true, 108 }; 109 110 static const struct aw_usbphy_conf a83t_usbphy_conf = { 111 .num_phys = 3, 112 .phy_type = AWUSBPHY_TYPE_A83T, 113 .pmu_unk1 = false, 114 .phy0_route = false, 115 }; 116 117 static const struct aw_usbphy_conf h6_usbphy_conf = { 118 .num_phys = 4, 119 .phy_type = AWUSBPHY_TYPE_H6, 120 .pmu_unk1 = false, 121 .phy0_route = true, 122 }; 123 124 static struct ofw_compat_data compat_data[] = { 125 { "allwinner,sun4i-a10-usb-phy", (uintptr_t)&a10_usbphy_conf }, 126 { "allwinner,sun5i-a13-usb-phy", (uintptr_t)&a13_usbphy_conf }, 127 { "allwinner,sun6i-a31-usb-phy", (uintptr_t)&a31_usbphy_conf }, 128 { "allwinner,sun7i-a20-usb-phy", (uintptr_t)&a20_usbphy_conf }, 129 { "allwinner,sun8i-h3-usb-phy", (uintptr_t)&h3_usbphy_conf }, 130 { "allwinner,sun50i-a64-usb-phy", (uintptr_t)&a64_usbphy_conf }, 131 { "allwinner,sun8i-a83t-usb-phy", (uintptr_t)&a83t_usbphy_conf }, 132 { "allwinner,sun50i-h6-usb-phy", (uintptr_t)&h6_usbphy_conf }, 133 { NULL, 0 } 134 }; 135 136 struct awusbphy_softc { 137 struct resource * phy_ctrl; 138 struct resource ** pmu; 139 regulator_t * reg; 140 gpio_pin_t id_det_pin; 141 int id_det_valid; 142 gpio_pin_t vbus_det_pin; 143 int vbus_det_valid; 144 struct aw_usbphy_conf *phy_conf; 145 int mode; 146 }; 147 148 /* Phy class and methods. */ 149 static int awusbphy_phy_enable(struct phynode *phy, bool enable); 150 static int awusbphy_get_mode(struct phynode *phy, int *mode); 151 static int awusbphy_set_mode(struct phynode *phy, int mode); 152 static phynode_usb_method_t awusbphy_phynode_methods[] = { 153 PHYNODEMETHOD(phynode_enable, awusbphy_phy_enable), 154 PHYNODEMETHOD(phynode_usb_get_mode, awusbphy_get_mode), 155 PHYNODEMETHOD(phynode_usb_set_mode, awusbphy_set_mode), 156 157 PHYNODEMETHOD_END 158 }; 159 DEFINE_CLASS_1(awusbphy_phynode, awusbphy_phynode_class, awusbphy_phynode_methods, 160 sizeof(struct phynode_usb_sc), phynode_usb_class); 161 162 #define RD4(res, o) bus_read_4(res, (o)) 163 #define WR4(res, o, v) bus_write_4(res, (o), (v)) 164 #define CLR4(res, o, m) WR4(res, o, RD4(res, o) & ~(m)) 165 #define SET4(res, o, m) WR4(res, o, RD4(res, o) | (m)) 166 167 #define PHY_CSR 0x00 168 #define ID_PULLUP_EN (1 << 17) 169 #define DPDM_PULLUP_EN (1 << 16) 170 #define FORCE_ID (0x3 << 14) 171 #define FORCE_ID_SHIFT 14 172 #define FORCE_ID_LOW 2 173 #define FORCE_ID_HIGH 3 174 #define FORCE_VBUS_VALID (0x3 << 12) 175 #define FORCE_VBUS_VALID_SHIFT 12 176 #define FORCE_VBUS_VALID_LOW 2 177 #define FORCE_VBUS_VALID_HIGH 3 178 #define VBUS_CHANGE_DET (1 << 6) 179 #define ID_CHANGE_DET (1 << 5) 180 #define DPDM_CHANGE_DET (1 << 4) 181 #define OTG_PHY_CFG 0x20 182 #define OTG_PHY_ROUTE_OTG (1 << 0) 183 #define PMU_IRQ_ENABLE 0x00 184 #define PMU_AHB_INCR8 (1 << 10) 185 #define PMU_AHB_INCR4 (1 << 9) 186 #define PMU_AHB_INCRX_ALIGN (1 << 8) 187 #define PMU_ULPI_BYPASS (1 << 0) 188 #define PMU_UNK_H3 0x10 189 #define PMU_UNK_H3_CLR 0x2 190 191 static void 192 awusbphy_configure(device_t dev, int phyno) 193 { 194 struct awusbphy_softc *sc; 195 196 sc = device_get_softc(dev); 197 198 if (sc->pmu[phyno] == NULL) 199 return; 200 201 if (sc->phy_conf->pmu_unk1 == true) 202 CLR4(sc->pmu[phyno], PMU_UNK_H3, PMU_UNK_H3_CLR); 203 204 SET4(sc->pmu[phyno], PMU_IRQ_ENABLE, PMU_ULPI_BYPASS | 205 PMU_AHB_INCR8 | PMU_AHB_INCR4 | PMU_AHB_INCRX_ALIGN); 206 } 207 208 static int 209 awusbphy_init(device_t dev) 210 { 211 struct awusbphy_softc *sc; 212 phandle_t node; 213 char pname[20]; 214 uint32_t val; 215 int error, off, rid; 216 regulator_t reg; 217 hwreset_t rst; 218 clk_t clk; 219 220 sc = device_get_softc(dev); 221 node = ofw_bus_get_node(dev); 222 223 sc->phy_conf = (struct aw_usbphy_conf *)ofw_bus_search_compatible(dev, compat_data)->ocd_data; 224 225 /* Get phy_ctrl region */ 226 if (ofw_bus_find_string_index(node, "reg-names", "phy_ctrl", &rid) != 0) { 227 device_printf(dev, "Cannot locate phy control resource\n"); 228 return (ENXIO); 229 } 230 sc->phy_ctrl = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid, 231 RF_ACTIVE); 232 if (sc->phy_ctrl == NULL) { 233 device_printf(dev, "Cannot allocate resource\n"); 234 return (ENXIO); 235 } 236 237 /* Enable clocks */ 238 for (off = 0; clk_get_by_ofw_index(dev, 0, off, &clk) == 0; off++) { 239 error = clk_enable(clk); 240 if (error != 0) { 241 device_printf(dev, "couldn't enable clock %s\n", 242 clk_get_name(clk)); 243 return (error); 244 } 245 } 246 247 /* De-assert resets */ 248 for (off = 0; hwreset_get_by_ofw_idx(dev, 0, off, &rst) == 0; off++) { 249 error = hwreset_deassert(rst); 250 if (error != 0) { 251 device_printf(dev, "couldn't de-assert reset %d\n", 252 off); 253 return (error); 254 } 255 } 256 257 /* Get GPIOs */ 258 error = gpio_pin_get_by_ofw_property(dev, node, "usb0_id_det-gpios", 259 &sc->id_det_pin); 260 if (error == 0) 261 sc->id_det_valid = 1; 262 error = gpio_pin_get_by_ofw_property(dev, node, "usb0_vbus_det-gpios", 263 &sc->vbus_det_pin); 264 if (error == 0) 265 sc->vbus_det_valid = 1; 266 267 sc->reg = malloc(sizeof(*(sc->reg)) * sc->phy_conf->num_phys, M_DEVBUF, 268 M_WAITOK | M_ZERO); 269 sc->pmu = malloc(sizeof(*(sc->pmu)) * sc->phy_conf->num_phys, M_DEVBUF, 270 M_WAITOK | M_ZERO); 271 /* Get regulators */ 272 for (off = 0; off < sc->phy_conf->num_phys; off++) { 273 snprintf(pname, sizeof(pname), "usb%d_vbus-supply", off); 274 if (regulator_get_by_ofw_property(dev, 0, pname, ®) == 0) 275 sc->reg[off] = reg; 276 277 snprintf(pname, sizeof(pname), "pmu%d", off); 278 if (ofw_bus_find_string_index(node, "reg-names", 279 pname, &rid) != 0) 280 continue; 281 282 sc->pmu[off] = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid, 283 RF_ACTIVE); 284 if (sc->pmu[off] == NULL) { 285 device_printf(dev, "Cannot allocate resource\n"); 286 return (ENXIO); 287 } 288 } 289 290 /* Enable OTG PHY for host mode */ 291 val = bus_read_4(sc->phy_ctrl, PHY_CSR); 292 val &= ~(VBUS_CHANGE_DET | ID_CHANGE_DET | DPDM_CHANGE_DET); 293 val |= (ID_PULLUP_EN | DPDM_PULLUP_EN); 294 val &= ~FORCE_ID; 295 val |= (FORCE_ID_LOW << FORCE_ID_SHIFT); 296 val &= ~FORCE_VBUS_VALID; 297 val |= (FORCE_VBUS_VALID_HIGH << FORCE_VBUS_VALID_SHIFT); 298 bus_write_4(sc->phy_ctrl, PHY_CSR, val); 299 300 return (0); 301 } 302 303 static int 304 awusbphy_vbus_detect(device_t dev, int *val) 305 { 306 struct awusbphy_softc *sc; 307 bool active; 308 int error; 309 310 sc = device_get_softc(dev); 311 312 if (sc->vbus_det_valid) { 313 error = gpio_pin_is_active(sc->vbus_det_pin, &active); 314 if (error != 0) { 315 device_printf(dev, "Cannot get status of id pin %d\n", 316 error); 317 return (error); 318 } 319 *val = active; 320 return (0); 321 } 322 323 /* TODO check vbus_power-supply. */ 324 325 /* 326 * If there is no way to detect, assume present. 327 */ 328 *val = 1; 329 return (0); 330 } 331 332 static int 333 awusbphy_phy_enable(struct phynode *phynode, bool enable) 334 { 335 device_t dev; 336 intptr_t phy; 337 struct awusbphy_softc *sc; 338 regulator_t reg; 339 int error, vbus_det; 340 341 dev = phynode_get_device(phynode); 342 phy = phynode_get_id(phynode); 343 sc = device_get_softc(dev); 344 345 if (phy < 0 || phy >= sc->phy_conf->num_phys) 346 return (ERANGE); 347 348 /* Configure PHY */ 349 awusbphy_configure(dev, phy); 350 351 /* Regulators are optional. If not found, return success. */ 352 reg = sc->reg[phy]; 353 if (reg == NULL) 354 return (0); 355 356 if (phy == 0) { 357 /* If an external vbus is detected, do not enable phy 0 */ 358 error = awusbphy_vbus_detect(dev, &vbus_det); 359 if (error) 360 goto out; 361 362 /* TODO check vbus_power-supply as well. */ 363 if (sc->vbus_det_valid && vbus_det == 1) { 364 if (bootverbose) 365 device_printf(dev, "External VBUS detected, " 366 "not enabling the regulator\n"); 367 return (0); 368 } 369 } 370 if (enable) { 371 /* Depending on the PHY we need to route OTG to OHCI/EHCI */ 372 error = regulator_enable(reg); 373 } else 374 error = regulator_disable(reg); 375 376 out: 377 if (error != 0) { 378 device_printf(dev, 379 "couldn't %s regulator for phy %jd\n", 380 enable ? "enable" : "disable", (intmax_t)phy); 381 return (error); 382 } 383 384 return (0); 385 } 386 387 static int 388 awusbphy_get_mode(struct phynode *phynode, int *mode) 389 { 390 struct awusbphy_softc *sc; 391 device_t dev; 392 393 dev = phynode_get_device(phynode); 394 sc = device_get_softc(dev); 395 396 *mode = sc->mode; 397 398 return (0); 399 } 400 401 static int 402 awusbphy_set_mode(struct phynode *phynode, int mode) 403 { 404 device_t dev; 405 intptr_t phy; 406 struct awusbphy_softc *sc; 407 uint32_t val; 408 int error, vbus_det; 409 410 dev = phynode_get_device(phynode); 411 phy = phynode_get_id(phynode); 412 sc = device_get_softc(dev); 413 414 if (phy != 0) { 415 if (mode != PHY_USB_MODE_HOST) 416 return (EINVAL); 417 return (0); 418 } 419 420 if (sc->mode == mode) 421 return (0); 422 if (mode == PHY_USB_MODE_OTG) /* TODO */ 423 return (EOPNOTSUPP); 424 425 error = awusbphy_vbus_detect(dev, &vbus_det); 426 if (error != 0) 427 return (error); 428 429 val = bus_read_4(sc->phy_ctrl, PHY_CSR); 430 val &= ~(VBUS_CHANGE_DET | ID_CHANGE_DET | DPDM_CHANGE_DET); 431 val |= (ID_PULLUP_EN | DPDM_PULLUP_EN); 432 val &= ~FORCE_VBUS_VALID; 433 val |= (vbus_det ? FORCE_VBUS_VALID_HIGH : FORCE_VBUS_VALID_LOW) << 434 FORCE_VBUS_VALID_SHIFT; 435 val &= ~FORCE_ID; 436 437 switch (mode) { 438 case PHY_USB_MODE_HOST: 439 val |= (FORCE_ID_LOW << FORCE_ID_SHIFT); 440 if (sc->phy_conf->phy0_route) 441 CLR4(sc->phy_ctrl, OTG_PHY_CFG, OTG_PHY_ROUTE_OTG); 442 break; 443 case PHY_USB_MODE_DEVICE: 444 val |= (FORCE_ID_HIGH << FORCE_ID_SHIFT); 445 if (sc->phy_conf->phy0_route) 446 SET4(sc->phy_ctrl, OTG_PHY_CFG, OTG_PHY_ROUTE_OTG); 447 break; 448 default: 449 return (EINVAL); 450 } 451 452 bus_write_4(sc->phy_ctrl, PHY_CSR, val); 453 sc->mode = mode; 454 return (0); 455 } 456 457 static int 458 awusbphy_probe(device_t dev) 459 { 460 if (!ofw_bus_status_okay(dev)) 461 return (ENXIO); 462 463 if (ofw_bus_search_compatible(dev, compat_data)->ocd_data == 0) 464 return (ENXIO); 465 466 device_set_desc(dev, "Allwinner USB PHY"); 467 return (BUS_PROBE_DEFAULT); 468 } 469 470 static int 471 awusbphy_attach(device_t dev) 472 { 473 int error; 474 struct phynode *phynode; 475 struct phynode_init_def phy_init; 476 struct awusbphy_softc *sc; 477 int i; 478 479 sc = device_get_softc(dev); 480 error = awusbphy_init(dev); 481 if (error) { 482 device_printf(dev, "failed to initialize USB PHY, error %d\n", 483 error); 484 return (error); 485 } 486 487 /* Create and register phys. */ 488 for (i = 0; i < sc->phy_conf->num_phys; i++) { 489 bzero(&phy_init, sizeof(phy_init)); 490 phy_init.id = i; 491 phy_init.ofw_node = ofw_bus_get_node(dev); 492 phynode = phynode_create(dev, &awusbphy_phynode_class, 493 &phy_init); 494 if (phynode == NULL) { 495 device_printf(dev, "failed to create USB PHY\n"); 496 return (ENXIO); 497 } 498 if (phynode_register(phynode) == NULL) { 499 device_printf(dev, "failed to create USB PHY\n"); 500 return (ENXIO); 501 } 502 } 503 504 return (error); 505 } 506 507 static device_method_t awusbphy_methods[] = { 508 /* Device interface */ 509 DEVMETHOD(device_probe, awusbphy_probe), 510 DEVMETHOD(device_attach, awusbphy_attach), 511 512 DEVMETHOD_END 513 }; 514 515 static driver_t awusbphy_driver = { 516 "awusbphy", 517 awusbphy_methods, 518 sizeof(struct awusbphy_softc) 519 }; 520 521 /* aw_usbphy needs to come up after regulators/gpio/etc, but before ehci/ohci */ 522 EARLY_DRIVER_MODULE(awusbphy, simplebus, awusbphy_driver, 0, 0, 523 BUS_PASS_SUPPORTDEV + BUS_PASS_ORDER_MIDDLE); 524 MODULE_VERSION(awusbphy, 1); 525