xref: /freebsd/sys/amd64/pci/pci_cfgreg.c (revision 8881d206f4e68b564c2c5f50fc717086fc3e827a)
1 /*-
2  * SPDX-License-Identifier: BSD-2-Clause-FreeBSD
3  *
4  * Copyright (c) 1997, Stefan Esser <se@freebsd.org>
5  * Copyright (c) 2000, Michael Smith <msmith@freebsd.org>
6  * Copyright (c) 2000, BSDi
7  * All rights reserved.
8  *
9  * Redistribution and use in source and binary forms, with or without
10  * modification, are permitted provided that the following conditions
11  * are met:
12  * 1. Redistributions of source code must retain the above copyright
13  *    notice unmodified, this list of conditions, and the following
14  *    disclaimer.
15  * 2. Redistributions in binary form must reproduce the above copyright
16  *    notice, this list of conditions and the following disclaimer in the
17  *    documentation and/or other materials provided with the distribution.
18  *
19  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
20  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
21  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
22  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
23  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
24  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
25  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
26  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
27  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
28  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
29  */
30 
31 #include <sys/cdefs.h>
32 __FBSDID("$FreeBSD$");
33 
34 #include <sys/param.h>
35 #include <sys/systm.h>
36 #include <sys/bus.h>
37 #include <sys/lock.h>
38 #include <sys/kernel.h>
39 #include <sys/mutex.h>
40 #include <sys/sysctl.h>
41 #include <dev/pci/pcivar.h>
42 #include <dev/pci/pcireg.h>
43 #include <vm/vm.h>
44 #include <vm/pmap.h>
45 #include <machine/pci_cfgreg.h>
46 
47 static uint32_t	pci_docfgregread(int bus, int slot, int func, int reg,
48 		    int bytes);
49 static int	pciereg_cfgread(int bus, unsigned slot, unsigned func,
50 		    unsigned reg, unsigned bytes);
51 static void	pciereg_cfgwrite(int bus, unsigned slot, unsigned func,
52 		    unsigned reg, int data, unsigned bytes);
53 static int	pcireg_cfgread(int bus, int slot, int func, int reg, int bytes);
54 static void	pcireg_cfgwrite(int bus, int slot, int func, int reg, int data, int bytes);
55 
56 SYSCTL_DECL(_hw_pci);
57 
58 /*
59  * For amd64 we assume that type 1 I/O port-based access always works.
60  * If an ACPI MCFG table exists, pcie_cfgregopen() will be called to
61  * switch to memory-mapped access.
62  */
63 int cfgmech = CFGMECH_1;
64 
65 static vm_offset_t pcie_base;
66 static int pcie_minbus, pcie_maxbus;
67 static uint32_t pcie_badslots;
68 static struct mtx pcicfg_mtx;
69 MTX_SYSINIT(pcicfg_mtx, &pcicfg_mtx, "pcicfg_mtx", MTX_SPIN);
70 static int mcfg_enable = 1;
71 SYSCTL_INT(_hw_pci, OID_AUTO, mcfg, CTLFLAG_RDTUN, &mcfg_enable, 0,
72     "Enable support for PCI-e memory mapped config access");
73 
74 int
75 pci_cfgregopen(void)
76 {
77 
78 	return (1);
79 }
80 
81 static uint32_t
82 pci_docfgregread(int bus, int slot, int func, int reg, int bytes)
83 {
84 
85 	if (cfgmech == CFGMECH_PCIE &&
86 	    (bus >= pcie_minbus && bus <= pcie_maxbus) &&
87 	    (bus != 0 || !(1 << slot & pcie_badslots)))
88 		return (pciereg_cfgread(bus, slot, func, reg, bytes));
89 	else
90 		return (pcireg_cfgread(bus, slot, func, reg, bytes));
91 }
92 
93 /*
94  * Read configuration space register
95  */
96 u_int32_t
97 pci_cfgregread(int bus, int slot, int func, int reg, int bytes)
98 {
99 	uint32_t line;
100 
101 	/*
102 	 * Some BIOS writers seem to want to ignore the spec and put
103 	 * 0 in the intline rather than 255 to indicate none.  Some use
104 	 * numbers in the range 128-254 to indicate something strange and
105 	 * apparently undocumented anywhere.  Assume these are completely bogus
106 	 * and map them to 255, which the rest of the PCI code recognizes as
107 	 * as an invalid IRQ.
108 	 */
109 	if (reg == PCIR_INTLINE && bytes == 1) {
110 		line = pci_docfgregread(bus, slot, func, PCIR_INTLINE, 1);
111 		if (line == 0 || line >= 128)
112 			line = PCI_INVALID_IRQ;
113 		return (line);
114 	}
115 	return (pci_docfgregread(bus, slot, func, reg, bytes));
116 }
117 
118 /*
119  * Write configuration space register
120  */
121 void
122 pci_cfgregwrite(int bus, int slot, int func, int reg, u_int32_t data, int bytes)
123 {
124 
125 	if (cfgmech == CFGMECH_PCIE &&
126 	    (bus >= pcie_minbus && bus <= pcie_maxbus) &&
127 	    (bus != 0 || !(1 << slot & pcie_badslots)))
128 		pciereg_cfgwrite(bus, slot, func, reg, data, bytes);
129 	else
130 		pcireg_cfgwrite(bus, slot, func, reg, data, bytes);
131 }
132 
133 /*
134  * Configuration space access using direct register operations
135  */
136 
137 /* enable configuration space accesses and return data port address */
138 static int
139 pci_cfgenable(unsigned bus, unsigned slot, unsigned func, int reg, int bytes)
140 {
141 	int dataport = 0;
142 
143 	if (bus <= PCI_BUSMAX && slot <= PCI_SLOTMAX && func <= PCI_FUNCMAX &&
144 	    (unsigned)reg <= PCI_REGMAX && bytes != 3 &&
145 	    (unsigned)bytes <= 4 && (reg & (bytes - 1)) == 0) {
146 		outl(CONF1_ADDR_PORT, (1U << 31) | (bus << 16) | (slot << 11)
147 		    | (func << 8) | (reg & ~0x03));
148 		dataport = CONF1_DATA_PORT + (reg & 0x03);
149 	}
150 	return (dataport);
151 }
152 
153 /* disable configuration space accesses */
154 static void
155 pci_cfgdisable(void)
156 {
157 
158 	/*
159 	 * Do nothing.  Writing a 0 to the address port can apparently
160 	 * confuse some bridges and cause spurious access failures.
161 	 */
162 }
163 
164 static int
165 pcireg_cfgread(int bus, int slot, int func, int reg, int bytes)
166 {
167 	int data = -1;
168 	int port;
169 
170 	mtx_lock_spin(&pcicfg_mtx);
171 	port = pci_cfgenable(bus, slot, func, reg, bytes);
172 	if (port != 0) {
173 		switch (bytes) {
174 		case 1:
175 			data = inb(port);
176 			break;
177 		case 2:
178 			data = inw(port);
179 			break;
180 		case 4:
181 			data = inl(port);
182 			break;
183 		}
184 		pci_cfgdisable();
185 	}
186 	mtx_unlock_spin(&pcicfg_mtx);
187 	return (data);
188 }
189 
190 static void
191 pcireg_cfgwrite(int bus, int slot, int func, int reg, int data, int bytes)
192 {
193 	int port;
194 
195 	mtx_lock_spin(&pcicfg_mtx);
196 	port = pci_cfgenable(bus, slot, func, reg, bytes);
197 	if (port != 0) {
198 		switch (bytes) {
199 		case 1:
200 			outb(port, data);
201 			break;
202 		case 2:
203 			outw(port, data);
204 			break;
205 		case 4:
206 			outl(port, data);
207 			break;
208 		}
209 		pci_cfgdisable();
210 	}
211 	mtx_unlock_spin(&pcicfg_mtx);
212 }
213 
214 int
215 pcie_cfgregopen(uint64_t base, uint8_t minbus, uint8_t maxbus)
216 {
217 	uint32_t val1, val2;
218 	int slot;
219 
220 	if (!mcfg_enable)
221 		return (0);
222 
223 	if (minbus != 0)
224 		return (0);
225 
226 	if (bootverbose)
227 		printf("PCIe: Memory Mapped configuration base @ 0x%lx\n",
228 		    base);
229 
230 	/* XXX: We should make sure this really fits into the direct map. */
231 	pcie_base = (vm_offset_t)pmap_mapdev_pciecfg(base, (maxbus + 1) << 20);
232 	pcie_minbus = minbus;
233 	pcie_maxbus = maxbus;
234 	cfgmech = CFGMECH_PCIE;
235 
236 	/*
237 	 * On some AMD systems, some of the devices on bus 0 are
238 	 * inaccessible using memory-mapped PCI config access.  Walk
239 	 * bus 0 looking for such devices.  For these devices, we will
240 	 * fall back to using type 1 config access instead.
241 	 */
242 	if (pci_cfgregopen() != 0) {
243 		for (slot = 0; slot <= PCI_SLOTMAX; slot++) {
244 			val1 = pcireg_cfgread(0, slot, 0, 0, 4);
245 			if (val1 == 0xffffffff)
246 				continue;
247 
248 			val2 = pciereg_cfgread(0, slot, 0, 0, 4);
249 			if (val2 != val1)
250 				pcie_badslots |= (1 << slot);
251 		}
252 	}
253 
254 	return (1);
255 }
256 
257 #define PCIE_VADDR(base, reg, bus, slot, func)	\
258 	((base)				+	\
259 	((((bus) & 0xff) << 20)		|	\
260 	(((slot) & 0x1f) << 15)		|	\
261 	(((func) & 0x7) << 12)		|	\
262 	((reg) & 0xfff)))
263 
264 /*
265  * AMD BIOS And Kernel Developer's Guides for CPU families starting with 10h
266  * have a requirement that all accesses to the memory mapped PCI configuration
267  * space are done using AX class of registers.
268  * Since other vendors do not currently have any contradicting requirements
269  * the AMD access pattern is applied universally.
270  */
271 
272 static int
273 pciereg_cfgread(int bus, unsigned slot, unsigned func, unsigned reg,
274     unsigned bytes)
275 {
276 	vm_offset_t va;
277 	int data = -1;
278 
279 	if (bus < pcie_minbus || bus > pcie_maxbus || slot > PCI_SLOTMAX ||
280 	    func > PCI_FUNCMAX || reg > PCIE_REGMAX)
281 		return (-1);
282 
283 	va = PCIE_VADDR(pcie_base, reg, bus, slot, func);
284 
285 	switch (bytes) {
286 	case 4:
287 		__asm("movl %1, %0" : "=a" (data)
288 		    : "m" (*(volatile uint32_t *)va));
289 		break;
290 	case 2:
291 		__asm("movzwl %1, %0" : "=a" (data)
292 		    : "m" (*(volatile uint16_t *)va));
293 		break;
294 	case 1:
295 		__asm("movzbl %1, %0" : "=a" (data)
296 		    : "m" (*(volatile uint8_t *)va));
297 		break;
298 	}
299 
300 	return (data);
301 }
302 
303 static void
304 pciereg_cfgwrite(int bus, unsigned slot, unsigned func, unsigned reg, int data,
305     unsigned bytes)
306 {
307 	vm_offset_t va;
308 
309 	if (bus < pcie_minbus || bus > pcie_maxbus || slot > PCI_SLOTMAX ||
310 	    func > PCI_FUNCMAX || reg > PCIE_REGMAX)
311 		return;
312 
313 	va = PCIE_VADDR(pcie_base, reg, bus, slot, func);
314 
315 	switch (bytes) {
316 	case 4:
317 		__asm("movl %1, %0" : "=m" (*(volatile uint32_t *)va)
318 		    : "a" (data));
319 		break;
320 	case 2:
321 		__asm("movw %1, %0" : "=m" (*(volatile uint16_t *)va)
322 		    : "a" ((uint16_t)data));
323 		break;
324 	case 1:
325 		__asm("movb %1, %0" : "=m" (*(volatile uint8_t *)va)
326 		    : "a" ((uint8_t)data));
327 		break;
328 	}
329 }
330