xref: /freebsd/sys/amd64/pci/pci_cfgreg.c (revision 5ca8e32633c4ffbbcd6762e5888b6a4ba0708c6c)
1 /*-
2  * SPDX-License-Identifier: BSD-2-Clause
3  *
4  * Copyright (c) 1997, Stefan Esser <se@freebsd.org>
5  * Copyright (c) 2000, Michael Smith <msmith@freebsd.org>
6  * Copyright (c) 2000, BSDi
7  * All rights reserved.
8  *
9  * Redistribution and use in source and binary forms, with or without
10  * modification, are permitted provided that the following conditions
11  * are met:
12  * 1. Redistributions of source code must retain the above copyright
13  *    notice unmodified, this list of conditions, and the following
14  *    disclaimer.
15  * 2. Redistributions in binary form must reproduce the above copyright
16  *    notice, this list of conditions and the following disclaimer in the
17  *    documentation and/or other materials provided with the distribution.
18  *
19  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
20  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
21  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
22  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
23  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
24  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
25  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
26  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
27  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
28  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
29  */
30 
31 #include <sys/param.h>
32 #include <sys/systm.h>
33 #include <sys/bus.h>
34 #include <sys/lock.h>
35 #include <sys/kernel.h>
36 #include <sys/malloc.h>
37 #include <sys/mutex.h>
38 #include <sys/sysctl.h>
39 #include <dev/pci/pcivar.h>
40 #include <dev/pci/pcireg.h>
41 #include <vm/vm.h>
42 #include <vm/pmap.h>
43 #include <machine/pci_cfgreg.h>
44 
45 struct pcie_mcfg_region {
46 	char *base;
47 	uint16_t domain;
48 	uint8_t minbus;
49 	uint8_t maxbus;
50 };
51 
52 static uint32_t	pci_docfgregread(int domain, int bus, int slot, int func,
53 		    int reg, int bytes);
54 static struct pcie_mcfg_region *pcie_lookup_region(int domain, int bus);
55 static int	pciereg_cfgread(struct pcie_mcfg_region *region, int bus,
56 		    unsigned slot, unsigned func, unsigned reg, unsigned bytes);
57 static void	pciereg_cfgwrite(struct pcie_mcfg_region *region, int bus,
58 		    unsigned slot, unsigned func, unsigned reg, int data,
59 		    unsigned bytes);
60 static int	pcireg_cfgread(int bus, int slot, int func, int reg, int bytes);
61 static void	pcireg_cfgwrite(int bus, int slot, int func, int reg, int data, int bytes);
62 
63 SYSCTL_DECL(_hw_pci);
64 
65 /*
66  * For amd64 we assume that type 1 I/O port-based access always works.
67  * If an ACPI MCFG table exists, pcie_cfgregopen() will be called to
68  * switch to memory-mapped access.
69  */
70 int cfgmech = CFGMECH_1;
71 
72 static struct pcie_mcfg_region *mcfg_regions;
73 static int mcfg_numregions;
74 static uint32_t pcie_badslots;
75 static struct mtx pcicfg_mtx;
76 MTX_SYSINIT(pcicfg_mtx, &pcicfg_mtx, "pcicfg_mtx", MTX_SPIN);
77 
78 static int mcfg_enable = 1;
79 SYSCTL_INT(_hw_pci, OID_AUTO, mcfg, CTLFLAG_RDTUN, &mcfg_enable, 0,
80     "Enable support for PCI-e memory mapped config access");
81 
82 int
83 pci_cfgregopen(void)
84 {
85 
86 	return (1);
87 }
88 
89 static struct pcie_mcfg_region *
90 pcie_lookup_region(int domain, int bus)
91 {
92 	for (int i = 0; i < mcfg_numregions; i++)
93 		if (mcfg_regions[i].domain == domain &&
94 		    bus >= mcfg_regions[i].minbus &&
95 		    bus <= mcfg_regions[i].maxbus)
96 			return (&mcfg_regions[i]);
97 	return (NULL);
98 }
99 
100 static uint32_t
101 pci_docfgregread(int domain, int bus, int slot, int func, int reg, int bytes)
102 {
103 	if (domain == 0 && bus == 0 && (1 << slot & pcie_badslots) != 0)
104 		return (pcireg_cfgread(bus, slot, func, reg, bytes));
105 
106 	if (cfgmech == CFGMECH_PCIE) {
107 		struct pcie_mcfg_region *region;
108 
109 		region = pcie_lookup_region(domain, bus);
110 		if (region != NULL)
111 			return (pciereg_cfgread(region, bus, slot, func, reg,
112 			    bytes));
113 	}
114 
115 	if (domain == 0)
116 		return (pcireg_cfgread(bus, slot, func, reg, bytes));
117 	else
118 		return (-1);
119 }
120 
121 /*
122  * Read configuration space register
123  */
124 u_int32_t
125 pci_cfgregread(int domain, int bus, int slot, int func, int reg, int bytes)
126 {
127 	uint32_t line;
128 
129 	/*
130 	 * Some BIOS writers seem to want to ignore the spec and put
131 	 * 0 in the intline rather than 255 to indicate none.  Some use
132 	 * numbers in the range 128-254 to indicate something strange and
133 	 * apparently undocumented anywhere.  Assume these are completely bogus
134 	 * and map them to 255, which the rest of the PCI code recognizes as
135 	 * as an invalid IRQ.
136 	 */
137 	if (reg == PCIR_INTLINE && bytes == 1) {
138 		line = pci_docfgregread(domain, bus, slot, func, PCIR_INTLINE,
139 		    1);
140 		if (line == 0 || line >= 128)
141 			line = PCI_INVALID_IRQ;
142 		return (line);
143 	}
144 	return (pci_docfgregread(domain, bus, slot, func, reg, bytes));
145 }
146 
147 /*
148  * Write configuration space register
149  */
150 void
151 pci_cfgregwrite(int domain, int bus, int slot, int func, int reg, uint32_t data,
152     int bytes)
153 {
154 	if (domain == 0 && bus == 0 && (1 << slot & pcie_badslots) != 0) {
155 		pcireg_cfgwrite(bus, slot, func, reg, data, bytes);
156 		return;
157 	}
158 
159 	if (cfgmech == CFGMECH_PCIE) {
160 		struct pcie_mcfg_region *region;
161 
162 		region = pcie_lookup_region(domain, bus);
163 		if (region != NULL) {
164 			pciereg_cfgwrite(region, bus, slot, func, reg, data,
165 			    bytes);
166 			return;
167 		}
168 	}
169 
170 	if (domain == 0)
171 		pcireg_cfgwrite(bus, slot, func, reg, data, bytes);
172 }
173 
174 /*
175  * Configuration space access using direct register operations
176  */
177 
178 /* enable configuration space accesses and return data port address */
179 static int
180 pci_cfgenable(unsigned bus, unsigned slot, unsigned func, int reg, int bytes)
181 {
182 	int dataport = 0;
183 
184 	if (bus <= PCI_BUSMAX && slot <= PCI_SLOTMAX && func <= PCI_FUNCMAX &&
185 	    (unsigned)reg <= PCI_REGMAX && bytes != 3 &&
186 	    (unsigned)bytes <= 4 && (reg & (bytes - 1)) == 0) {
187 		outl(CONF1_ADDR_PORT, (1U << 31) | (bus << 16) | (slot << 11)
188 		    | (func << 8) | (reg & ~0x03));
189 		dataport = CONF1_DATA_PORT + (reg & 0x03);
190 	}
191 	return (dataport);
192 }
193 
194 /* disable configuration space accesses */
195 static void
196 pci_cfgdisable(void)
197 {
198 
199 	/*
200 	 * Do nothing.  Writing a 0 to the address port can apparently
201 	 * confuse some bridges and cause spurious access failures.
202 	 */
203 }
204 
205 static int
206 pcireg_cfgread(int bus, int slot, int func, int reg, int bytes)
207 {
208 	int data = -1;
209 	int port;
210 
211 	mtx_lock_spin(&pcicfg_mtx);
212 	port = pci_cfgenable(bus, slot, func, reg, bytes);
213 	if (port != 0) {
214 		switch (bytes) {
215 		case 1:
216 			data = inb(port);
217 			break;
218 		case 2:
219 			data = inw(port);
220 			break;
221 		case 4:
222 			data = inl(port);
223 			break;
224 		}
225 		pci_cfgdisable();
226 	}
227 	mtx_unlock_spin(&pcicfg_mtx);
228 	return (data);
229 }
230 
231 static void
232 pcireg_cfgwrite(int bus, int slot, int func, int reg, int data, int bytes)
233 {
234 	int port;
235 
236 	mtx_lock_spin(&pcicfg_mtx);
237 	port = pci_cfgenable(bus, slot, func, reg, bytes);
238 	if (port != 0) {
239 		switch (bytes) {
240 		case 1:
241 			outb(port, data);
242 			break;
243 		case 2:
244 			outw(port, data);
245 			break;
246 		case 4:
247 			outl(port, data);
248 			break;
249 		}
250 		pci_cfgdisable();
251 	}
252 	mtx_unlock_spin(&pcicfg_mtx);
253 }
254 
255 static void
256 pcie_init_badslots(struct pcie_mcfg_region *region)
257 {
258 	uint32_t val1, val2;
259 	int slot;
260 
261 	/*
262 	 * On some AMD systems, some of the devices on bus 0 are
263 	 * inaccessible using memory-mapped PCI config access.  Walk
264 	 * bus 0 looking for such devices.  For these devices, we will
265 	 * fall back to using type 1 config access instead.
266 	 */
267 	if (pci_cfgregopen() != 0) {
268 		for (slot = 0; slot <= PCI_SLOTMAX; slot++) {
269 			val1 = pcireg_cfgread(0, slot, 0, 0, 4);
270 			if (val1 == 0xffffffff)
271 				continue;
272 
273 			val2 = pciereg_cfgread(region, 0, slot, 0, 0, 4);
274 			if (val2 != val1)
275 				pcie_badslots |= (1 << slot);
276 		}
277 	}
278 }
279 
280 int
281 pcie_cfgregopen(uint64_t base, uint16_t domain, uint8_t minbus, uint8_t maxbus)
282 {
283 	struct pcie_mcfg_region *region;
284 
285 	if (!mcfg_enable)
286 		return (0);
287 
288 	if (bootverbose)
289 		printf("PCI: MCFG domain %u bus %u-%u base @ 0x%lx\n",
290 		    domain, minbus, maxbus, base);
291 
292 	/* Resize the array. */
293 	mcfg_regions = realloc(mcfg_regions,
294 	    sizeof(*mcfg_regions) * (mcfg_numregions + 1), M_DEVBUF, M_WAITOK);
295 
296 	region = &mcfg_regions[mcfg_numregions];
297 
298 	/* XXX: We should make sure this really fits into the direct map. */
299 	region->base = pmap_mapdev_pciecfg(base + (minbus << 20), (maxbus + 1 - minbus) << 20);
300 	region->domain = domain;
301 	region->minbus = minbus;
302 	region->maxbus = maxbus;
303 	mcfg_numregions++;
304 
305 	cfgmech = CFGMECH_PCIE;
306 
307 	if (domain == 0 && minbus == 0)
308 		pcie_init_badslots(region);
309 
310 	return (1);
311 }
312 
313 #define PCIE_VADDR(base, reg, bus, slot, func)	\
314 	((base)				+	\
315 	((((bus) & 0xff) << 20)		|	\
316 	(((slot) & 0x1f) << 15)		|	\
317 	(((func) & 0x7) << 12)		|	\
318 	((reg) & 0xfff)))
319 
320 /*
321  * AMD BIOS And Kernel Developer's Guides for CPU families starting with 10h
322  * have a requirement that all accesses to the memory mapped PCI configuration
323  * space are done using AX class of registers.
324  * Since other vendors do not currently have any contradicting requirements
325  * the AMD access pattern is applied universally.
326  */
327 
328 static int
329 pciereg_cfgread(struct pcie_mcfg_region *region, int bus, unsigned slot,
330     unsigned func, unsigned reg, unsigned bytes)
331 {
332 	char *va;
333 	int data = -1;
334 
335 	MPASS(bus >= region->minbus && bus <= region->maxbus);
336 
337 	if (slot > PCI_SLOTMAX || func > PCI_FUNCMAX || reg > PCIE_REGMAX)
338 		return (-1);
339 
340 	va = PCIE_VADDR(region->base, reg, bus - region->minbus, slot, func);
341 
342 	switch (bytes) {
343 	case 4:
344 		__asm("movl %1, %0" : "=a" (data)
345 		    : "m" (*(volatile uint32_t *)va));
346 		break;
347 	case 2:
348 		__asm("movzwl %1, %0" : "=a" (data)
349 		    : "m" (*(volatile uint16_t *)va));
350 		break;
351 	case 1:
352 		__asm("movzbl %1, %0" : "=a" (data)
353 		    : "m" (*(volatile uint8_t *)va));
354 		break;
355 	}
356 
357 	return (data);
358 }
359 
360 static void
361 pciereg_cfgwrite(struct pcie_mcfg_region *region, int bus, unsigned slot,
362     unsigned func, unsigned reg, int data, unsigned bytes)
363 {
364 	char *va;
365 
366 	MPASS(bus >= region->minbus && bus <= region->maxbus);
367 
368 	if (slot > PCI_SLOTMAX || func > PCI_FUNCMAX || reg > PCIE_REGMAX)
369 		return;
370 
371 	va = PCIE_VADDR(region->base, reg, bus - region->minbus, slot, func);
372 
373 	switch (bytes) {
374 	case 4:
375 		__asm("movl %1, %0" : "=m" (*(volatile uint32_t *)va)
376 		    : "a" (data));
377 		break;
378 	case 2:
379 		__asm("movw %1, %0" : "=m" (*(volatile uint16_t *)va)
380 		    : "a" ((uint16_t)data));
381 		break;
382 	case 1:
383 		__asm("movb %1, %0" : "=m" (*(volatile uint8_t *)va)
384 		    : "a" ((uint8_t)data));
385 		break;
386 	}
387 }
388