xref: /freebsd/stand/efi/gptboot/proto.c (revision fe75646a0234a261c0013bf1840fdac4acaf0cec)
1 /*-
2  * Copyright (c) 2019 Netflix, Inc
3  *
4  * Redistribution and use in source and binary forms, with or without
5  * modification, are permitted provided that the following conditions
6  * are met:
7  * 1. Redistributions of source code must retain the above copyright
8  *    notice, this list of conditions and the following disclaimer.
9  * 2. Redistributions in binary form must reproduce the above copyright
10  *    notice, this list of conditions and the following disclaimer in the
11  *    documentation and/or other materials provided with the distribution.
12  *
13  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
14  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
15  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
16  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
17  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
18  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
19  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
20  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
21  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
22  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
23  * SUCH DAMAGE.
24  */
25 
26 #include <sys/param.h>
27 #include <machine/elf.h>
28 #include <machine/stdarg.h>
29 #include <stand.h>
30 
31 #include <efi.h>
32 #include <eficonsctl.h>
33 #include <efichar.h>
34 
35 #include "boot_module.h"
36 #include "paths.h"
37 #include "proto.h"
38 
39 #include "gpt.h"
40 #include <sys/gpt.h>
41 static const uuid_t freebsd_ufs_uuid = GPT_ENT_TYPE_FREEBSD_UFS;
42 static char secbuf[4096] __aligned(4096);
43 static struct dsk dsk;
44 static dev_info_t *devices = NULL;
45 static dev_info_t *raw_device = NULL;
46 
47 static EFI_GUID BlockIoProtocolGUID = BLOCK_IO_PROTOCOL;
48 static EFI_GUID DevicePathGUID = DEVICE_PATH_PROTOCOL;
49 
50 /*
51  * Shim routine for the gpt code to read in the gpt table. The
52  * devinfo is always going to be for the raw device.
53  */
54 int
55 drvread(struct dsk *dskp, void *buf, daddr_t lba, unsigned nblk)
56 {
57 	int size;
58 	EFI_STATUS status;
59 	dev_info_t *devinfo = (dev_info_t *)dskp->devinfo;
60 	EFI_BLOCK_IO *dev = devinfo->dev;
61 
62 	lba = lba / (dev->Media->BlockSize / DEV_BSIZE);
63 	size = nblk * DEV_BSIZE;
64 
65 	status = dev->ReadBlocks(dev, dev->Media->MediaId, lba, size, buf);
66 	if (status != EFI_SUCCESS) {
67 		DPRINTF("dskread: failed dev: %p, id: %u, lba: %ju, size: %d, "
68 		    "status: %lu\n", devinfo->dev,
69 		    dev->Media->MediaId, (uintmax_t)lba, size,
70 		    EFI_ERROR_CODE(status));
71 		return (-1);
72 	}
73 
74 	return (0);
75 }
76 
77 /*
78  * Shim routine for the gpt code to write in the gpt table. The
79  * devinfo is always going to be for the raw device.
80  */
81 int
82 drvwrite(struct dsk *dskp, void *buf, daddr_t lba, unsigned nblk)
83 {
84 	int size;
85 	EFI_STATUS status;
86 	dev_info_t *devinfo = (dev_info_t *)dskp->devinfo;
87 	EFI_BLOCK_IO *dev = devinfo->dev;
88 
89 	if (dev->Media->ReadOnly)
90 		return -1;
91 
92 	lba = lba / (dev->Media->BlockSize / DEV_BSIZE);
93 	size = nblk * DEV_BSIZE;
94 
95 	status = dev->WriteBlocks(dev, dev->Media->MediaId, lba, size, buf);
96 	if (status != EFI_SUCCESS) {
97 		DPRINTF("dskread: failed dev: %p, id: %u, lba: %ju, size: %d, "
98 		    "status: %lu\n", devinfo->dev,
99 		    dev->Media->MediaId, (uintmax_t)lba, size,
100 		    EFI_ERROR_CODE(status));
101 		return (-1);
102 	}
103 
104 	return (0);
105 }
106 
107 /*
108  * Return the number of LBAs the drive has.
109  */
110 uint64_t
111 drvsize(struct dsk *dskp)
112 {
113 	dev_info_t *devinfo = (dev_info_t *)dskp->devinfo;
114 	EFI_BLOCK_IO *dev = devinfo->dev;
115 
116 	return (dev->Media->LastBlock + 1);
117 }
118 
119 static int
120 partition_number(EFI_DEVICE_PATH *devpath)
121 {
122 	EFI_DEVICE_PATH *md;
123 	HARDDRIVE_DEVICE_PATH *hd;
124 
125 	md = efi_devpath_last_node(devpath);
126 	if (md == NULL)
127 		return (-1);
128 	if (DevicePathSubType(md) != MEDIA_HARDDRIVE_DP)
129 		return (-1);
130 	hd = (HARDDRIVE_DEVICE_PATH *)md;
131 	return (hd->PartitionNumber);
132 }
133 
134 /*
135  * Find the raw partition for the imgpath and save it
136  */
137 static void
138 probe_handle(EFI_HANDLE h, EFI_DEVICE_PATH *imgpath)
139 {
140 	dev_info_t *devinfo;
141 	EFI_BLOCK_IO *blkio;
142 	EFI_DEVICE_PATH *devpath, *trimmed = NULL;
143 	EFI_STATUS status;
144 
145 	/* Figure out if we're dealing with an actual partition. */
146 	status = OpenProtocolByHandle(h, &DevicePathGUID, (void **)&devpath);
147 	if (status != EFI_SUCCESS)
148 		return;
149 #ifdef EFI_DEBUG
150 	{
151 		CHAR16 *text = efi_devpath_name(devpath);
152 		DPRINTF("probing: %S ", text);
153 		efi_free_devpath_name(text);
154 	}
155 #endif
156 	/*
157 	 * The RAW device is the same as the imgpath with the last
158 	 * MEDIA_DEVICE bit trimmed off. imgpath will end with the
159 	 * MEDIA_DEVICE for the ESP we booted off of.
160 	 */
161 	if (!efi_devpath_same_disk(imgpath, devpath)) {
162 		trimmed = efi_devpath_trim(imgpath);
163 		if (!efi_devpath_match(trimmed, devpath)) {
164 			free(trimmed);
165 			DPRINTF("Not the same disk\n");
166 			return;
167 		}
168 	}
169 	status = OpenProtocolByHandle(h, &BlockIoProtocolGUID, (void **)&blkio);
170 	if (status != EFI_SUCCESS) {
171 		DPRINTF("Can't get the block I/O protocol block\n");
172 		return;
173 	}
174 	devinfo = malloc(sizeof(*devinfo));
175 	if (devinfo == NULL) {
176 		DPRINTF("Failed to allocate devinfo\n");
177 		return;
178 	}
179 	devinfo->dev = blkio;
180 	devinfo->devpath = devpath;
181 	devinfo->devhandle = h;
182 	devinfo->preferred = 1;
183 	devinfo->next = NULL;
184 	devinfo->devdata = NULL;
185 	if (trimmed == NULL) {
186 		DPRINTF("Found partition %d\n", partition_number(devpath));
187 		add_device(&devices, devinfo);
188 	} else {
189 		free(trimmed);
190 		DPRINTF("Found raw device\n");
191 		if (raw_device) {
192 			printf(BOOTPROG": Found two raw devices, inconceivable?\n");
193 			return;
194 		}
195 		raw_device = devinfo;
196 	}
197 }
198 
199 static void
200 probe_handles(EFI_HANDLE *handles, UINTN nhandles, EFI_DEVICE_PATH *imgpath)
201 {
202 	UINTN i;
203 
204 	for (i = 0; i < nhandles; i++)
205 		probe_handle(handles[i], imgpath);
206 }
207 
208 static dev_info_t *
209 find_partition(int part)
210 {
211 	dev_info_t *dev;
212 
213 	if (part == 0)
214 		return (NULL);
215 	for (dev = devices; dev != NULL; dev = dev->next)
216 		if (partition_number(dev->devpath) == part)
217 			break;
218 	return (dev);
219 }
220 
221 void
222 choice_protocol(EFI_HANDLE *handles, UINTN nhandles, EFI_DEVICE_PATH *imgpath)
223 {
224 	const boot_module_t *mod = &ufs_module;
225 	dev_info_t *bootdev;
226 	void *loaderbuf;
227 	size_t loadersize;
228 	int parts;
229 	const char *fn = PATH_LOADER_EFI;
230 
231 	/*
232 	 * Probe the provided handles to find the partitions that
233 	 * are on the same drive.
234 	 */
235 	probe_handles(handles, nhandles, imgpath);
236 	dsk.devinfo = raw_device;
237 	if (dsk.devinfo == NULL) {
238 		printf(BOOTPROG": unable to find raw disk to read gpt\n");
239 		return;
240 	}
241 
242 	/*
243 	 * Read in the GPT table, and then find the right partition.
244 	 * gptread, gptfind and gptfaileboot are shared with the
245 	 * BIOS version of the gptboot program.
246 	 */
247 	if (gptread(&dsk, secbuf) == -1) {
248 		printf(BOOTPROG ": unable to load GPT\n");
249 		return;
250 	}
251 	// XXX:
252 	// real gptboot can parse a command line before trying this loop.
253 	// But since we don't parse anything at all, hard wire the partition
254 	// to be -1 (meaning look for the next one).
255 	parts = 0;
256 	while (gptfind(&freebsd_ufs_uuid, &dsk, -1) != -1) {
257 		parts++;
258 		bootdev = find_partition(dsk.part);
259 		if (bootdev == NULL) {
260 			printf(BOOTPROG": Can't find partition %d\n",
261 			    dsk.part);
262 			goto next;
263 		}
264 		if (mod->load(fn, bootdev, &loaderbuf, &loadersize) !=
265 		    EFI_SUCCESS) {
266 			printf(BOOTPROG": Can't load %s from partition %d\n",
267 			    fn, dsk.part);
268 			goto next;
269 		}
270 		try_boot(mod, bootdev, loaderbuf, loadersize);
271 next:
272 		gptbootfailed(&dsk);
273 	}
274 	if (parts == 0)
275 		printf("%s: no UFS partition was found\n", BOOTPROG);
276 }
277