xref: /freebsd/stand/efi/gptboot/proto.c (revision 72143e89bb430c3b1406b399b810806904f6c882)
1 /*-
2  * Copyright (c) 2019 Netflix, Inc
3  *
4  * Redistribution and use in source and binary forms, with or without
5  * modification, are permitted provided that the following conditions
6  * are met:
7  * 1. Redistributions of source code must retain the above copyright
8  *    notice, this list of conditions and the following disclaimer.
9  * 2. Redistributions in binary form must reproduce the above copyright
10  *    notice, this list of conditions and the following disclaimer in the
11  *    documentation and/or other materials provided with the distribution.
12  *
13  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
14  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
15  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
16  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
17  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
18  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
19  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
20  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
21  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
22  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
23  * SUCH DAMAGE.
24  */
25 
26 #include <sys/cdefs.h>
27 __FBSDID("$FreeBSD$");
28 
29 #include <sys/param.h>
30 #include <machine/elf.h>
31 #include <machine/stdarg.h>
32 #include <stand.h>
33 
34 #include <efi.h>
35 #include <eficonsctl.h>
36 #include <efichar.h>
37 
38 #include "boot_module.h"
39 #include "paths.h"
40 #include "proto.h"
41 
42 #include "gpt.h"
43 #include <sys/gpt.h>
44 static const uuid_t freebsd_ufs_uuid = GPT_ENT_TYPE_FREEBSD_UFS;
45 static char secbuf[4096] __aligned(4096);
46 static struct dsk dsk;
47 static dev_info_t *devices = NULL;
48 static dev_info_t *raw_device = NULL;
49 
50 static EFI_GUID BlockIoProtocolGUID = BLOCK_IO_PROTOCOL;
51 static EFI_GUID DevicePathGUID = DEVICE_PATH_PROTOCOL;
52 
53 /*
54  * Shim routine for the gpt code to read in the gpt table. The
55  * devinfo is always going to be for the raw device.
56  */
57 int
58 drvread(struct dsk *dskp, void *buf, daddr_t lba, unsigned nblk)
59 {
60 	int size;
61 	EFI_STATUS status;
62 	dev_info_t *devinfo = (dev_info_t *)dskp->devinfo;
63 	EFI_BLOCK_IO *dev = devinfo->dev;
64 
65 	lba = lba / (dev->Media->BlockSize / DEV_BSIZE);
66 	size = nblk * DEV_BSIZE;
67 
68 	status = dev->ReadBlocks(dev, dev->Media->MediaId, lba, size, buf);
69 	if (status != EFI_SUCCESS) {
70 		DPRINTF("dskread: failed dev: %p, id: %u, lba: %ju, size: %d, "
71 		    "status: %lu\n", devinfo->dev,
72 		    dev->Media->MediaId, (uintmax_t)lba, size,
73 		    EFI_ERROR_CODE(status));
74 		return (-1);
75 	}
76 
77 	return (0);
78 }
79 
80 /*
81  * Shim routine for the gpt code to write in the gpt table. The
82  * devinfo is always going to be for the raw device.
83  */
84 int
85 drvwrite(struct dsk *dskp, void *buf, daddr_t lba, unsigned nblk)
86 {
87 	int size;
88 	EFI_STATUS status;
89 	dev_info_t *devinfo = (dev_info_t *)dskp->devinfo;
90 	EFI_BLOCK_IO *dev = devinfo->dev;
91 
92 	if (dev->Media->ReadOnly)
93 		return -1;
94 
95 	lba = lba / (dev->Media->BlockSize / DEV_BSIZE);
96 	size = nblk * DEV_BSIZE;
97 
98 	status = dev->WriteBlocks(dev, dev->Media->MediaId, lba, size, buf);
99 	if (status != EFI_SUCCESS) {
100 		DPRINTF("dskread: failed dev: %p, id: %u, lba: %ju, size: %d, "
101 		    "status: %lu\n", devinfo->dev,
102 		    dev->Media->MediaId, (uintmax_t)lba, size,
103 		    EFI_ERROR_CODE(status));
104 		return (-1);
105 	}
106 
107 	return (0);
108 }
109 
110 /*
111  * Return the number of LBAs the drive has.
112  */
113 uint64_t
114 drvsize(struct dsk *dskp)
115 {
116 	dev_info_t *devinfo = (dev_info_t *)dskp->devinfo;
117 	EFI_BLOCK_IO *dev = devinfo->dev;
118 
119 	return (dev->Media->LastBlock + 1);
120 }
121 
122 static int
123 partition_number(EFI_DEVICE_PATH *devpath)
124 {
125 	EFI_DEVICE_PATH *md;
126 	HARDDRIVE_DEVICE_PATH *hd;
127 
128 	md = efi_devpath_last_node(devpath);
129 	if (md == NULL)
130 		return (-1);
131 	if (DevicePathSubType(md) != MEDIA_HARDDRIVE_DP)
132 		return (-1);
133 	hd = (HARDDRIVE_DEVICE_PATH *)md;
134 	return (hd->PartitionNumber);
135 }
136 
137 /*
138  * Find the raw partition for the imgpath and save it
139  */
140 static void
141 probe_handle(EFI_HANDLE h, EFI_DEVICE_PATH *imgpath)
142 {
143 	dev_info_t *devinfo;
144 	EFI_BLOCK_IO *blkio;
145 	EFI_DEVICE_PATH *devpath, *trimmed = NULL;
146 	EFI_STATUS status;
147 
148 	/* Figure out if we're dealing with an actual partition. */
149 	status = OpenProtocolByHandle(h, &DevicePathGUID, (void **)&devpath);
150 	if (status != EFI_SUCCESS)
151 		return;
152 #ifdef EFI_DEBUG
153 	{
154 		CHAR16 *text = efi_devpath_name(devpath);
155 		DPRINTF("probing: %S ", text);
156 		efi_free_devpath_name(text);
157 	}
158 #endif
159 	/*
160 	 * The RAW device is the same as the imgpath with the last
161 	 * MEDIA_DEVICE bit trimmed off. imgpath will end with the
162 	 * MEDIA_DEVICE for the ESP we booted off of.
163 	 */
164 	if (!efi_devpath_same_disk(imgpath, devpath)) {
165 		trimmed = efi_devpath_trim(imgpath);
166 		if (!efi_devpath_match(trimmed, devpath)) {
167 			free(trimmed);
168 			DPRINTF("Not the same disk\n");
169 			return;
170 		}
171 	}
172 	status = OpenProtocolByHandle(h, &BlockIoProtocolGUID, (void **)&blkio);
173 	if (status != EFI_SUCCESS) {
174 		DPRINTF("Can't get the block I/O protocol block\n");
175 		return;
176 	}
177 	devinfo = malloc(sizeof(*devinfo));
178 	if (devinfo == NULL) {
179 		DPRINTF("Failed to allocate devinfo\n");
180 		return;
181 	}
182 	devinfo->dev = blkio;
183 	devinfo->devpath = devpath;
184 	devinfo->devhandle = h;
185 	devinfo->preferred = 1;
186 	devinfo->next = NULL;
187 	devinfo->devdata = NULL;
188 	if (trimmed == NULL) {
189 		DPRINTF("Found partition %d\n", partition_number(devpath));
190 		add_device(&devices, devinfo);
191 	} else {
192 		free(trimmed);
193 		DPRINTF("Found raw device\n");
194 		if (raw_device) {
195 			printf(BOOTPROG": Found two raw devices, inconceivable?\n");
196 			return;
197 		}
198 		raw_device = devinfo;
199 	}
200 }
201 
202 static void
203 probe_handles(EFI_HANDLE *handles, UINTN nhandles, EFI_DEVICE_PATH *imgpath)
204 {
205 	UINTN i;
206 
207 	for (i = 0; i < nhandles; i++)
208 		probe_handle(handles[i], imgpath);
209 }
210 
211 static dev_info_t *
212 find_partition(int part)
213 {
214 	dev_info_t *dev;
215 
216 	if (part == 0)
217 		return (NULL);
218 	for (dev = devices; dev != NULL; dev = dev->next)
219 		if (partition_number(dev->devpath) == part)
220 			break;
221 	return (dev);
222 }
223 
224 void
225 choice_protocol(EFI_HANDLE *handles, UINTN nhandles, EFI_DEVICE_PATH *imgpath)
226 {
227 	const boot_module_t *mod = &ufs_module;
228 	dev_info_t *bootdev;
229 	void *loaderbuf;
230 	size_t loadersize;
231 	int parts;
232 	const char *fn = PATH_LOADER_EFI;
233 
234 	/*
235 	 * Probe the provided handles to find the partitions that
236 	 * are on the same drive.
237 	 */
238 	probe_handles(handles, nhandles, imgpath);
239 	dsk.devinfo = raw_device;
240 	if (dsk.devinfo == NULL) {
241 		printf(BOOTPROG": unable to find raw disk to read gpt\n");
242 		return;
243 	}
244 
245 	/*
246 	 * Read in the GPT table, and then find the right partition.
247 	 * gptread, gptfind and gptfaileboot are shared with the
248 	 * BIOS version of the gptboot program.
249 	 */
250 	if (gptread(&dsk, secbuf) == -1) {
251 		printf(BOOTPROG ": unable to load GPT\n");
252 		return;
253 	}
254 	// XXX:
255 	// real gptboot can parse a command line before trying this loop.
256 	// But since we don't parse anything at all, hard wire the partition
257 	// to be -1 (meaning look for the next one).
258 	parts = 0;
259 	while (gptfind(&freebsd_ufs_uuid, &dsk, -1) != -1) {
260 		parts++;
261 		bootdev = find_partition(dsk.part);
262 		if (bootdev == NULL) {
263 			printf(BOOTPROG": Can't find partition %d\n",
264 			    dsk.part);
265 			goto next;
266 		}
267 		if (mod->load(fn, bootdev, &loaderbuf, &loadersize) !=
268 		    EFI_SUCCESS) {
269 			printf(BOOTPROG": Can't load %s from partition %d\n",
270 			    fn, dsk.part);
271 			goto next;
272 		}
273 		try_boot(mod, bootdev, loaderbuf, loadersize);
274 next:
275 		gptbootfailed(&dsk);
276 	}
277 	if (parts == 0)
278 		printf("%s: no UFS partition was found\n", BOOTPROG);
279 }
280