1.\" Copyright (c) 1985, 1991, 1993, 1994 2.\" The Regents of the University of California. All rights reserved. 3.\" 4.\" Redistribution and use in source and binary forms, with or without 5.\" modification, are permitted provided that the following conditions 6.\" are met: 7.\" 1. Redistributions of source code must retain the above copyright 8.\" notice, this list of conditions and the following disclaimer. 9.\" 2. Redistributions in binary form must reproduce the above copyright 10.\" notice, this list of conditions and the following disclaimer in the 11.\" documentation and/or other materials provided with the distribution. 12.\" 3. All advertising materials mentioning features or use of this software 13.\" must display the following acknowledgement: 14.\" This product includes software developed by the University of 15.\" California, Berkeley and its contributors. 16.\" 4. Neither the name of the University nor the names of its contributors 17.\" may be used to endorse or promote products derived from this software 18.\" without specific prior written permission. 19.\" 20.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 21.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 22.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 23.\" ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 24.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 25.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 26.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 27.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 28.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 29.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 30.\" SUCH DAMAGE. 31.\" 32.\" @(#)termcap.5 8.3 (Berkeley) 4/16/94 33.\" 34.\" /*************************************************************************** 35.\" * COPYRIGHT NOTICE * 36.\" **************************************************************************** 37.\" * ncurses is copyright (C) 1992-1995 * 38.\" * Zeyd M. Ben-Halim * 39.\" * zmbenhal@netcom.com * 40.\" * Eric S. Raymond * 41.\" * esr@snark.thyrsus.com * 42.\" * * 43.\" * Permission is hereby granted to reproduce and distribute ncurses * 44.\" * by any means and for any fee, whether alone or as part of a * 45.\" * larger distribution, in source or in binary form, PROVIDED * 46.\" * this notice is included with any such distribution, and is not * 47.\" * removed from any of its header files. Mention of ncurses in any * 48.\" * applications linked with it is highly appreciated. * 49.\" * * 50.\" * ncurses comes AS IS with no warranty, implied or expressed. * 51.\" * * 52.\" ***************************************************************************/ 53.\" 54.\" $FreeBSD$ 55.\" 56.Dd December 13, 2009 57.Dt TERMCAP 5 58.Os 59.Sh NAME 60.Nm termcap 61.Nd terminal capability data base 62.Sh SYNOPSIS 63.Nm 64.Sh DESCRIPTION 65The 66.Nm 67file 68is a data base describing terminals, 69used, 70for example, 71by 72.Xr \&vi 1 73and 74.Xr ncurses 3 . 75Terminals are described in 76.Nm 77by giving a set of capabilities that they have and by describing 78how operations are performed. 79Padding requirements and initialization sequences 80are included in 81.Nm . 82.Pp 83Entries in 84.Nm 85consist of a number of `:'-separated fields. 86The first entry for each terminal gives the names that are known for the 87terminal, separated by `|' characters. 88The first name given is the most common abbreviation for the terminal. 89The last name given should be a long name fully identifying the terminal, 90and all others are understood as synonyms for the terminal name. 91All names but the last should be in lower case and contain no blanks; 92the last name may well contain upper case characters and blanks for 93readability. 94.Pp 95Terminal names (except for the last, verbose entry) 96should be chosen using the following conventions. 97The particular piece of hardware making up the terminal 98should have a root name chosen, thus 99.Dq hp2621 100This name should not contain hyphens. 101Modes that the hardware can be in 102or user preferences 103should be indicated by appending a hyphen and an indicator of the mode. 104Therefore, a 105.Dq vt100 106in 132-column mode would be 107.Dq vt100-w . 108The following suffixes should be used where possible: 109.Bl -column indent "With automatic margins (usually default)xx" -offset indent 110.Sy "Suffix Meaning Example" 111-w Wide mode (more than 80 columns) vt100-w 112-am With automatic margins (usually default) vt100-am 113-nam Without automatic margins vt100-nam 114.Pf \- Ar n Ta No "Number of lines on screen aaa-60" 115-na No arrow keys (leave them in local) concept100-na 116.Pf \- Ar \&np Ta No "Number of pages of memory concept100-4p" 117-rv Reverse video concept100-rv 118.El 119.Sh CAPABILITIES 120The description field attempts to convey the semantics of the 121capability. 122You may find some codes in the description field: 123.Bl -tag -width #[1-9] 124.It (P) 125indicates that padding may be specified. 126.It #[1-9] 127in the description field indicates that the string is passed through 128.Xr tparm 3 129or 130.Xr tgoto 3 131with parms as given (#\fIi\fP). 132.It (P*) 133indicates that padding may vary in proportion to the number of 134lines affected. 135.It (#\d\fIi\fP\u) 136indicates the \fIi\fP\uth\d parameter. 137.El 138.Pp 139These are the boolean capabilities: 140.Bd -literal 141\fBBoolean TCap Description\fR 142\fBVariables Code\fR 143auto_left_margin bw cursor_left wraps from column 0 to last 144 column 145auto_right_margin am terminal has automatic margins 146no_esc_ctlc xb beehive (f1=escape, f2=ctrl C) 147ceol_standout_glitch xs standout not erased by overwriting (hp) 148eat_newline_glitch xn newline ignored after 80 cols (concept) 149erase_overstrike eo can erase overstrikes with a blank 150generic_type gn generic line type 151hard_copy hc hardcopy terminal 152has_meta_key km Has a meta key, sets msb high 153has_status_line hs has extra status line 154insert_null_glitch in insert mode distinguishes nulls 155memory_above da display may be retained above the screen 156memory_below db display may be retained below the screen 157move_insert_mode mi safe to move while in insert mode 158move_standout_mode ms safe to move while in standout mode 159over_strike os terminal can overstrike 160status_line_esc_ok es escape can be used on the status line 161dest_tabs_magic_smso xt tabs destructive, magic so char (t1061) 162tilde_glitch hz cannot print ~'s (hazeltine) 163transparent_underline ul underline character overstrikes 164xon_xoff xo terminal uses xon/xoff handshaking 165needs_xon_xoff nx padding will not work, xon/xoff required 166prtr_silent 5i printer will not echo on screen 167hard_cursor HC cursor is hard to see 168non_rev_rmcup NR enter_ca_mode does not reverse exit_ca_mode 169no_pad_char NP pad character does not exist 170non_dest_scroll_region ND scrolling region is non-destructive 171can_change cc terminal can re-define existing colors 172back_color_erase ut screen erased with background color 173hue_lightness_saturation hl terminal uses only HLS color 174 notation (tektronix) 175col_addr_glitch YA only positive motion for column address and 176 micro_column_address caps 177cr_cancels_micro_mode YB using cr turns off micro mode 178has_print_wheel YC printer needs operator to change character 179 set 180row_addr_glitch YD only positive motion for row_address and 181 micro_row_address caps 182semi_auto_right_margin YE printing in last column causes cr 183cpi_changes_res YF changing character pitch changes resolution 184lpi_changes_res YG changing line pitch changes resolution 185.Ed 186.Pp 187These are the numeric capabilities: 188.Bd -literal 189\fBNumeric TCap Description\fR 190\fBVariables Code\fR 191columns co number of columns in aline 192init_tabs it tabs initially every # spaces 193lines li number of lines on screen or page 194lines_of_memory lm lines of memory if > line. 0 => varies 195magic_cookie_glitch sg number of blank chars left by 196 enter_standout_mode or exit_standout_mode 197padding_baud_rate pb lowest baud rate where padding needed 198virtual_terminal vt virtual terminal number (CB/unix) 199width_status_line ws columns in status line 200num_labels Nl number of labels on screen 201label_height lh rows in each label 202label_width lw columns in each label 203max_attributes ma maximum combined attributes terminal can 204 handle 205maximum_windows MW maximum number of definable windows 206magic_cookie_glitch_ul ug number of blanks left by underline 207# 208# These came in with SVr4's color support 209# 210max_colors Co maximum numbers of colors on screen 211max_pairs pa maximum number of color-pairs on the screen 212no_color_video NC video attributes that cannot be used with 213 colors 214# 215# The following numeric capabilities are present in the SVr4.0 term 216# structure, but are not yet documented in the man page. 217# They came in with SVr4's printer support. 218# 219buffer_capacity Ya numbers of bytes buffered before printing 220dot_vert_spacing Yb spacing of pins vertically in pins per inch 221dot_horz_spacing Yc spacing of dots horizontally in dots per 222 inch 223max_micro_address Yd maximum value in micro_..._address 224max_micro_jump Ye maximum value in parm_..._micro 225micro_char_size Yf character size when in micro mode 226micro_line_size Yg line size when in micro mode 227number_of_pins Yh numbers of pins in print-head 228output_res_char Yi horizontal resolution in units per line 229output_res_line Yj vertical resolution in units per line 230output_res_horz_inch Yk horizontal resolution in units per inch 231output_res_vert_inch Yl vertical resolution in units per inch 232print_rate Ym print rate in chars per second 233wide_char_size Yn character step size when in double wide 234 mode 235buttons BT number of buttons on mouse 236bit_image_entwining Yo number of passed for each bit-image row 237bit_image_type Yp type of bit-image device 238.Ed 239.Pp 240These are the string capabilities: 241.Bd -literal 242\fBString TCap Description\fR 243\fBVariables Code\fR 244back_tab bt back tab (P) 245bell bl audible signal (bell) (P) 246carriage_return cr carriage return (P*) 247change_scroll_region cs change region to line #1 to line #2 (P) 248clear_all_tabs ct clear all tab stops (P) 249clear_screen cl clear screen and home cursor (P*) 250clr_eol ce clear to end of line (P) 251clr_eos cd clear to end of screen (P*) 252column_address ch horizontal position #1, absolute (P) 253command_character CC terminal settable cmd character in 254 prototype 255cursor_address cm move to row #1 columns #2 256cursor_down do down one line 257cursor_home ho home cursor 258cursor_invisible vi make cursor invisible 259cursor_left le move left one space 260cursor_mem_address CM memory relative cursor addressing 261cursor_normal ve make cursor appear normal (undo 262 cursor_invisible/cursor_visible) 263cursor_right nd move right one space 264cursor_to_ll ll last line, first column 265cursor_up up up one line 266cursor_visible vs make cursor very visible 267delete_character dc delete character (P*) 268delete_line dl delete line (P*) 269dis_status_line ds disable status line 270down_half_line hd half a line down 271enter_alt_charset_mode as start alternate character set (P) 272enter_blink_mode mb turn on blinking 273enter_bold_mode md turn on bold (extra bright) mode 274enter_ca_mode ti string to start programs using 275 cursor_address 276enter_delete_mode dm enter delete mode 277enter_dim_mode mh turn on half-bright mode 278enter_insert_mode im enter insert mode 279enter_secure_mode mk turn on blank mode (characters invisible) 280enter_protected_mode mp turn on protected mode 281enter_reverse_mode mr turn on reverse video mode 282enter_standout_mode so begin standout mode 283enter_underline_mode us begin underline mode 284erase_chars ec erase #1 characters (P) 285exit_alt_charset_mode ae end alternate character set (P) 286exit_attribute_mode me turn off all attributes 287exit_ca_mode te strings to end programs using cup 288exit_delete_mode ed end delete mode 289exit_insert_mode ei exit insert mode 290exit_standout_mode se exit standout mode 291exit_underline_mode ue exit underline mode 292flash_screen vb visible bell (may not move cursor) 293form_feed ff hardcopy terminal page eject (P*) 294from_status_line fs return from status line 295init_1string i1 initialization string 296init_2string is initialization string 297init_3string i3 initialization string 298init_file if name of initialization file 299insert_character ic insert character (P) 300insert_line al insert line (P*) 301insert_padding ip insert padding after inserted character 302key_backspace kb backspace key 303key_catab ka clear-all-tabs key 304key_clear kC clear-screen or erase key 305key_ctab kt clear-tab key 306key_dc kD delete-character key 307key_dl kL delete-line key 308key_down kd down-arrow key 309key_eic kM sent by rmir or smir in insert mode 310key_eol kE clear-to-end-of-line key 311key_eos kS clear-to-end-of-screen key 312key_f0 k0 F0 function key 313key_f1 k1 F1 function key 314key_f10 k; F10 function key 315key_f2 k2 F2 function key 316key_f3 k3 F3 function key 317key_f4 k4 F4 function key 318key_f5 k5 F5 function key 319key_f6 k6 F6 function key 320key_f7 k7 F7 function key 321key_f8 k8 F8 function key 322key_f9 k9 F9 function key 323key_home kh home key 324key_ic kI insert-character key 325key_il kA insert-line key 326key_left kl left-arrow key 327key_ll kH last-line key 328key_npage kN next-page key 329key_ppage kP prev-page key 330key_right kr right-arrow key 331key_sf kF scroll-forward key 332key_sr kR scroll-backward key 333key_stab kT set-tab key 334key_up ku up-arrow key 335keypad_local ke leave 'keyboard_transmit' mode 336keypad_xmit ks enter 'keyboard_transmit' mode 337lab_f0 l0 label on function key f0 if not f0 338lab_f1 l1 label on function key f1 if not f1 339lab_f10 la label on function key f10 if not f10 340lab_f2 l2 label on function key f2 if not f2 341lab_f3 l3 label on function key f3 if not f3 342lab_f4 l4 label on function key f4 if not f4 343lab_f5 l5 label on function key f5 if not f5 344lab_f6 l6 label on function key f6 if not f6 345lab_f7 l7 label on function key f7 if not f7 346lab_f8 l8 label on function key f8 if not f8 347lab_f9 l9 label on function key f9 if not f9 348meta_off mo turn off meta mode 349meta_on mm turn on meta mode (8th-bit on) 350newline nw newline (behave like cr followed by lf) 351pad_char pc padding char (instead of null) 352parm_dch DC delete #1 chars (P*) 353parm_delete_line DL delete #1 lines (P*) 354parm_down_cursor DO down #1 lines (P*) 355parm_ich IC insert #1 chars (P*) 356parm_index SF scroll forward #1 lines (P) 357parm_insert_line AL insert #1 lines (P*) 358parm_left_cursor LE move #1 chars to the left (P) 359parm_right_cursor RI move #1 chars to the right (P*) 360parm_rindex SR scroll back #1 lines (P) 361parm_up_cursor UP up #1 lines (P*) 362pkey_key pk program function key #1 to type string #2 363pkey_local pl program function key #1 to execute 364 string #2 365pkey_xmit px program function key #1 to transmit 366 string #2 367print_screen ps print contents of screen 368prtr_off pf turn off printer 369prtr_on po turn on printer 370repeat_char rp repeat char #1 #2 times (P*) 371reset_1string r1 reset string 372reset_2string r2 reset string 373reset_3string r3 reset string 374reset_file rf name of reset file 375restore_cursor rc restore cursor to last position of 376 save_cursor 377row_address cv vertical position #1 absolute (P) 378save_cursor sc save current cursor position (P) 379scroll_forward sf scroll text up (P) 380scroll_reverse sr scroll text down (P) 381set_attributes sa define video attributes #1-#9 (PG9) 382set_tab st set a tab in every row, current columns 383set_window wi current window is lines #1-#2 cols #3-#4 384tab ta tab to next 8-space hardware tab stop 385to_status_line ts move to status line 386underline_char uc underline char and move past it 387up_half_line hu half a line up 388init_prog iP path name of program for initialization 389key_a1 K1 upper left of keypad 390key_a3 K3 upper right of keypad 391key_b2 K2 center of keypad 392key_c1 K4 lower left of keypad 393key_c3 K5 lower right of keypad 394prtr_non pO turn on printer for #1 bytes 395termcap_init2 i2 secondary initialization string 396termcap_reset rs terminal reset string 397# 398# SVr1 capabilities stop here. IBM's version of terminfo is the same as 399# SVr4 up to this point, but has a different set afterwards. 400# 401char_padding rP like insert_padding but when in insert mode 402acs_chars ac graphics charset pairs - def=vt100 403plab_norm pn program label #1 to show string #2 404key_btab kB back-tab key 405enter_xon_mode SX turn on xon/xoff handshaking 406exit_xon_mode RX turn off xon/xoff handshaking 407enter_am_mode SA turn on automatic margins 408exit_am_mode RA turn off automatic margins 409xon_character XN XON character 410xoff_character XF XOFF character 411ena_acs eA enable alternate char set 412label_on LO turn on soft labels 413label_off LF turn off soft labels 414key_beg @1 begin key 415key_cancel @2 cancel key 416key_close @3 close key 417key_command @4 command key 418key_copy @5 copy key 419key_create @6 create key 420key_end @7 end key 421key_enter @8 enter/send key 422key_exit @9 exit key 423key_find @0 find key 424key_help %1 help key 425key_mark %2 mark key 426key_message %3 message key 427key_move %4 move key 428key_next %5 next key 429key_open %6 open key 430key_options %7 options key 431key_previous %8 previous key 432key_print %9 print key 433key_redo %0 redo key 434key_reference &1 reference key 435key_refresh &2 refresh key 436key_replace &3 replace key 437key_restart &4 restart key 438key_resume &5 resume key 439key_save &6 save key 440key_suspend &7 suspend key 441key_undo &8 undo key 442key_sbeg &9 shifted key 443key_scancel &0 shifted key 444key_scommand *1 shifted key 445key_scopy *2 shifted key 446key_screate *3 shifted key 447key_sdc *4 shifted key 448key_sdl *5 shifted key 449key_select *6 select key 450key_send *7 shifted key 451key_seol *8 shifted key 452key_sexit *9 shifted key 453key_sfind *0 shifted key 454key_shelp #1 shifted key 455key_shome #2 shifted key 456key_sic #3 shifted key 457key_sleft #4 shifted key 458key_smessage %a shifted key 459key_smove %b shifted key 460key_snext %c shifted key 461key_soptions %d shifted key 462key_sprevious %e shifted key 463key_sprint %f shifted key 464key_sredo %g shifted key 465key_sreplace %h shifted key 466key_sright %i shifted key 467key_srsume %j shifted key 468key_ssave !1 shifted key 469key_ssuspend !2 shifted key 470key_sundo !3 shifted key 471req_for_input RF send next input char (for ptys) 472key_f11 F1 F11 function key 473key_f12 F2 F12 function key 474key_f13 F3 F13 function key 475key_f14 F4 F14 function key 476key_f15 F5 F15 function key 477key_f16 F6 F16 function key 478key_f17 F7 F17 function key 479key_f18 F8 F18 function key 480key_f19 F9 F19 function key 481key_f20 FA F20 function key 482key_f21 FB F21 function key 483key_f22 FC F22 function key 484key_f23 FD F23 function key 485key_f24 FE F24 function key 486key_f25 FF F25 function key 487key_f26 FG F26 function key 488key_f27 FH F27 function key 489key_f28 FI F28 function key 490key_f29 FJ F29 function key 491key_f30 FK F30 function key 492key_f31 FL F31 function key 493key_f32 FM F32 function key 494key_f33 FN F33 function key 495key_f34 FO F34 function key 496key_f35 FP F35 function key 497key_f36 FQ F36 function key 498key_f37 FR F37 function key 499key_f38 FS F38 function key 500key_f39 FT F39 function key 501key_f40 FU F40 function key 502key_f41 FV F41 function key 503key_f42 FW F42 function key 504key_f43 FX F43 function key 505key_f44 FY F44 function key 506key_f45 FZ F45 function key 507key_f46 Fa F46 function key 508key_f47 Fb F47 function key 509key_f48 Fc F48 function key 510key_f49 Fd F49 function key 511key_f50 Fe F50 function key 512key_f51 Ff F51 function key 513key_f52 Fg F52 function key 514key_f53 Fh F53 function key 515key_f54 Fi F54 function key 516key_f55 Fj F55 function key 517key_f56 Fk F56 function key 518key_f57 Fl F57 function key 519key_f58 Fm F58 function key 520key_f59 Fn F59 function key 521key_f60 Fo F60 function key 522key_f61 Fp F61 function key 523key_f62 Fq F62 function key 524key_f63 Fr F63 function key 525clr_bol cb Clear to beginning of line 526clear_margins MC clear right and left soft margins 527set_left_margin ML set left soft margin 528set_right_margin MR set right soft margin 529label_format Lf label format 530set_clock SC set clock, #1 hrs #2 mins #3 secs 531display_clock DK display clock at (#1,#2) 532remove_clock RC remove clock 533create_window CW define a window #1 from #2, #3 to #4, #5 534goto_window WG go to window #1 535hangup HU hang-up phone 536dial_phone DI dial number #1 537quick_dial QD dial number #1 without checking 538tone TO select touch tone dialing 539pulse PU select pulse dialling 540flash_hook fh flash switch hook 541fixed_pause PA pause for 2-3 seconds 542wait_tone WA wait for dial-tone 543user0 u0 User string #0 544user1 u1 User string #1 545user2 u2 User string #2 546user3 u3 User string #3 547user4 u4 User string #4 548user5 u5 User string #5 549user6 u6 User string #6 550user7 u7 User string #7 551user8 u8 User string #8 552user9 u9 User string #9 553# 554# SVr4 added these capabilities to support color 555# 556orig_pair op Set default pair to its original value 557orig_colors oc Set all color pairs to the original ones 558initialize_color Ic initialize color #1 to (#2,#3,#4) 559initialize_pair Ip Initialize color pair #1 to fg=(#2,#3,#4), 560 bg=(#5,#6,#7) 561set_color_pair sp Set current color pair to #1 562set_foreground Sf Set foreground color #1 563set_background Sb Set background color #1 564# 565# SVr4 added these capabilities to support printers 566# 567change_char_pitch ZA Change number of characters per inch 568change_line_pitch ZB Change number of lines per inch 569change_res_horz ZC Change horizontal resolution 570change_res_vert ZD Change vertical resolution 571define_char ZE Define a character 572enter_doublewide_mode ZF Enter double-wide mode 573enter_draft_quality ZG Enter draft-quality mode 574enter_italics_mode ZH Enter italic mode 575enter_leftward_mode ZI Start leftward carriage motion 576enter_micro_mode ZJ Start micro-motion mode 577enter_near_letter_quality ZK Enter NLQ mode 578enter_normal_quality ZL Enter normal-quality mode 579enter_shadow_mode ZM Enter shadow-print mode 580enter_subscript_mode ZN Enter subscript mode 581enter_superscript_mode ZO Enter superscript mode 582enter_upward_mode ZP Start upward carriage motion 583exit_doublewide_mode ZQ End double-wide mode 584exit_italics_mode ZR End italic mode 585exit_leftward_mode ZS End left-motion mode 586exit_micro_mode ZT End micro-motion mode 587exit_shadow_mode ZU End shadow-print mode 588exit_subscript_mode ZV End subscript mode 589exit_superscript_mode ZW End superscript mode 590exit_upward_mode ZX End reverse character motion 591micro_column_address ZY Like column_address in micro mode 592micro_down ZZ Like cursor_down in micro mode 593micro_left Za Like cursor_left in micro mode 594micro_right Zb Like cursor_right in micro mode 595micro_row_address Zc Like row_address in micro mode 596micro_up Zd Like cursor_up in micro mode 597order_of_pins Ze Match software bits to print-head pins 598parm_down_micro Zf Like parm_down_cursor in micro mode 599parm_left_micro Zg Like parm_left_cursor in micro mode 600parm_right_micro Zh Like parm_right_cursor in micro mode 601parm_up_micro Zi Like parm_up_cursor in micro mode 602select_char_set Zj Select character set 603set_bottom_margin Zk Set bottom margin at current line 604set_bottom_margin_parm Zl Set bottom margin at line #1 or #2 lines 605 from bottom 606set_left_margin_parm Zm Set left (right) margin at column #1 (#2) 607set_right_margin_parm Zn Set right margin at column #1 608set_top_margin Zo Set top margin at current line 609set_top_margin_parm Zp Set top (bottom) margin at row #1 (#2) 610start_bit_image Zq Start printing bit image graphics 611start_char_set_def Zr Start character set definition 612stop_bit_image Zs Stop printing bit image graphics 613stop_char_set_def Zt End definition of character aet 614subscript_characters Zu List of subscriptible characters 615superscript_characters Zv List of superscriptible characters 616these_cause_cr Zw Printing any of these chars causes CR 617zero_motion Zx No motion for subsequent character 618# 619# The following string capabilities are present in the SVr4.0 term 620# structure, but are not documented in the man page. 621# 622char_set_names Zy List of character set names 623key_mouse Km Mouse event has occurred 624mouse_info Mi Mouse status information 625req_mouse_pos RQ Request mouse position 626get_mouse Gm Curses should get button events 627set_a_foreground AF Set ANSI foreground color 628set_a_background AB Set ANSI background color 629pkey_plab xl Program function key #1 to type string #2 630 and show string #3 631device_type dv Indicate language/codeset support 632code_set_init ci Init sequence for multiple codesets 633set0_des_seq s0 Shift to code set 0 (EUC set 0, ASCII) 634set1_des_seq s1 Shift to code set 1 635set2_des_seq s2 Shift to code set 2 636set3_des_seq s3 Shift to code set 3 637set_lr_margin ML Set both left and right margins to #1, #2 638set_tb_margin MT Sets both top and bottom margins to #1, #2 639bit_image_repeat Xy Repeat bit image cell #1 #2 times 640bit_image_newline Zz Move to next row of the bit image 641bit_image_carriage_return Yv Move to beginning of same row 642color_names Yw Give name for color #1 643define_bit_image_region Yx Define rectangular bit image region 644end_bit_image_region Yy End a bit-image region 645set_color_band Yz Change to ribbon color #1 646set_page_length YZ Set page length to #1 lines 647# 648# SVr4 added these capabilities for direct PC-clone support 649# 650display_pc_char S1 Display PC character 651enter_pc_charset_mode S2 Enter PC character display mode 652exit_pc_charset_mode S3 Exit PC character display mode 653enter_scancode_mode S4 Enter PC scancode mode 654exit_scancode_mode S5 Exit PC scancode mode 655pc_term_options S6 PC terminal options 656scancode_escape S7 Escape for scancode emulation 657alt_scancode_esc S8 Alternate escape for scancode emulation 658# 659# The XSI Curses standard added these. 660# 661enter_horizontal_hl_mode Xh Enter horizontal highlight mode 662enter_left_hl_mode Xl Enter left highlight mode 663enter_low_hl_mode Xo Enter low highlight mode 664enter_right_hl_mode Xr Enter right highlight mode 665enter_top_hl_mode Xt Enter top highlight mode 666enter_vertical_hl_mode Xv Enter vertical highlight mode 667.Ed 668.Pp 669Obsolete termcap capabilities. 670New software should not rely on them at all. 671.Bd -literal 672\fBBoolean TCap Description\fR 673\fBVariables Code\fR 674linefeed_is_newline NL move down with ^J 675even_parity EP terminal requires even parity 676odd_parity OP terminal requires odd parity 677half_duplex HD terminal is half-duplex 678lower_case_only LC terminal has only lower case 679upper_case_only UC terminal has only upper case 680has_hardware_tabs pt has 8-char tabs invoked with ^I 681return_does_clr_eol xr return clears the line 682tek_4025_insert_line xx Tektronix 4025 insert-line glitch 683backspaces_with_bs bs uses ^H to move left 684crt_no_scrolling ns crt cannot scroll 685no_correctly_working_cr nc no way to go to start of line 686.Ed 687.Bd -literal 688\fBNumber TCap Description\fR 689\fBVariables Code\fR 690backspace_delay dB padding required for ^H 691form_feed_delay dF padding required for ^L 692horizontal_tab_delay dT padding required for ^I 693vertical_tab_delay dV padding required for ^V 694number_of_function_keys kn count of function keys 695carriage_return_delay dC pad needed for CR 696new_line_delay dN pad needed for LF 697.Ed 698.Bd -literal 699\fBString TCap Description\fR 700\fBVariables Code\fR 701other_non_function_keys ko list of self-mapped keycaps 702arrow_key_map ma map arrow keys 703memory_lock_above ml lock visible screen memory above the 704 current line 705memory_unlock mu unlock visible screen memory above the 706 current line 707linefeed_if_not_lf nl use to move down 708backspace_if_not_bs bc move left, if not ^H 709.Ed 710.Ss A Sample Entry 711The following entry, which describes the Concept\-100, is among the more 712complex entries in the 713.Nm 714file as of this writing. 715.Bd -literal 716ca\||\|concept100\||\|c100\||\|concept\||\|c104\||\|concept100-4p\||\|HDS Concept\-100:\e 717 :al=3*\eE^R:am:bl=^G:cd=16*\eE^C:ce=16\eE^U:cl=2*^L:cm=\eEa%+ %+ :\e 718 :co#80:.cr=9^M:db:dc=16\eE^A:dl=3*\eE^B:do=^J:ei=\eE\e200:eo:im=\eE^P:in:\e 719 :ip=16*:is=\eEU\eEf\eE7\eE5\eE8\eEl\eENH\eEK\eE\e200\eEo&\e200\eEo\e47\eE:k1=\eE5:\e 720 :k2=\eE6:k3=\eE7:kb=^h:kd=\eE<:ke=\eEx:kh=\eE?:kl=\eE>:kr=\eE=:ks=\eEX:\e 721 :ku=\eE;:le=^H:li#24:mb=\eEC:me=\eEN\e200:mh=\eEE:mi:mk=\eEH:mp=\eEI:\e 722 :mr=\eED:nd=\eE=:pb#9600:rp=0.2*\eEr%.%+ :se=\eEd\eEe:sf=^J:so=\eEE\eED:\e 723 :.ta=8\et:te=\eEv \e200\e200\e200\e200\e200\e200\eEp\er\en:\e 724 :ti=\eEU\eEv 8p\eEp\er:ue=\eEg:ul:up=\eE;:us=\eEG:\e 725 :vb=\eEk\e200\e200\e200\e200\e200\e200\e200\e200\e200\e200\e200\e200\e200\e200\eEK:\e 726 :ve=\eEw:vs=\eEW:vt#8:xn:\e 727 :bs:cr=^M:dC#9:dT#8:nl=^J:ta=^I:pt: 728.Ed 729.Pp 730Entries may continue onto multiple lines by giving a \e as the last 731character of a line, and empty fields 732may be included for readability (here between the last field on a line 733and the first field on the next). 734Comments may be included on lines beginning with 735.Dq # . 736.Ss Types of Capabilities 737Capabilities in 738.Nm 739are of three types: Boolean capabilities, 740which indicate particular features that the terminal has; 741numeric capabilities, 742giving the size of the display or the size of other attributes; 743and string capabilities, 744which give character sequences that can be used to perform particular 745terminal operations. 746All capabilities have two-letter codes. 747For instance, the fact that 748the Concept has 749.Em automatic margins 750(an automatic return and linefeed 751when the end of a line is reached) is indicated by the Boolean capability 752.Sy \&am . 753Hence the description of the Concept includes 754.Sy \&am . 755.Pp 756Numeric capabilities are followed by the character `#' then the value. 757In the example above 758.Sy \&co , 759which indicates the number of columns the display has, 760gives the value `80' for the Concept. 761.Pp 762Finally, string-valued capabilities, such as 763.Sy \&ce 764(clear-to-end-of-line 765sequence) are given by the two-letter code, an `=', then a string 766ending at the next following `:'. 767A delay in milliseconds may appear after 768the `=' in such a capability, 769which causes padding characters to be supplied by 770.Xr tputs 3 771after the remainder of the string is sent to provide this delay. 772The delay can be either a number, 773such as `20', or a number followed by 774an `*', 775such as `3*'. 776An `*' indicates that the padding required is proportional 777to the number of lines affected by the operation, and the amount given is 778the per-affected-line padding required. 779(In the case of insert-character, 780the factor is still the number of 781.Em lines 782affected; 783this is always 1 unless the terminal has 784.Sy \&in 785and the software uses it.) 786When an `*' is specified, it is sometimes useful to give a delay of the form 787`3.5' to specify a delay per line to tenths of milliseconds. 788(Only one decimal place is allowed.) 789.Pp 790A number of escape sequences are provided in the string-valued capabilities 791for easy encoding of control characters there. 792.Sy \&\eE 793maps to an 794.Dv ESC 795character, 796.Sy \&^X 797maps to a control-X for any appropriate X, 798and the sequences 799.Sy \&\en 800.Sy \&\er 801.Sy \&\et 802.Sy \&\eb 803.Sy \&\ef 804map to linefeed, return, tab, backspace, and formfeed, respectively. 805Finally, characters may be given as three octal digits after a 806.Sy \&\e , 807and the characters 808.Sy \&^ 809and 810.Sy \&\e 811may be given as 812.Sy \&\e^ 813and 814.Sy \&\e\e . 815If it is necessary to place a 816.Sy \&: 817in a capability it must be escaped as 818.Sy \e: 819or be encoded as 820.Sy \&\e072 . 821If it is necessary to place a 822.Dv NUL 823character in a string capability it 824must be encoded as 825.Sy \&\e200 . 826(The routines that deal with 827.Nm 828use C strings and strip the high bits of the output very late, so that 829a 830.Sy \&\e200 831comes out as a 832.Sy \&\e000 833would.) 834.Pp 835Sometimes individual capabilities must be commented out. 836To do this, put a period before the capability name. 837For example, see the first 838.Sy \&cr 839and 840.Sy \&ta 841in the example above. 842.Ss Preparing Descriptions 843The most effective way to prepare a terminal description is by imitating 844the description of a similar terminal in 845.Nm 846and to build up a description gradually, using partial descriptions 847with 848.Xr \&vi 1 849to check that they are correct. 850Be aware that a very unusual terminal may expose deficiencies in 851the ability of the 852.Nm 853file to describe it 854or bugs in 855.Xr \&vi 1 . 856To easily test a new terminal description you are working on 857you can put it in your home directory in a file called 858.Pa .termcap 859and programs will look there before looking in 860.Pa /usr/share/misc/termcap . 861You can also set the environment variable 862.Ev TERMPATH 863to a list of absolute file pathnames (separated by spaces or colons), 864one of which contains the description you are working on, 865and programs will search them in the order listed, and nowhere else. 866See 867.Xr termcap 3 . 868The 869.Ev TERMCAP 870environment variable is usually set to the 871.Nm 872entry itself 873to avoid reading files when starting up a program. 874.Pp 875To get the padding for insert-line right 876(if the terminal manufacturer did not document it), 877a severe test is to use 878.Xr \&vi 1 879to edit 880.Pa /etc/passwd 881at 9600 baud, delete roughly 16 lines from the middle of the screen, 882then hit the `u' key several times quickly. 883If the display messes up, more padding is usually needed. 884A similar test can be used for insert-character. 885.Ss Basic Capabilities 886The number of columns on each line of the display is given by the 887.Sy \&co 888numeric capability. 889If the display is a 890.Tn CRT , 891then the 892number of lines on the screen is given by the 893.Sy \&li 894capability. 895If the display wraps around to the beginning of the next line when 896the cursor reaches the right margin, then it should have the 897.Sy \&am 898capability. 899If the terminal can clear its screen, 900the code to do this is given by the 901.Sy \&cl 902string capability. 903If the terminal overstrikes 904(rather than clearing the position when a character is overwritten), 905it should have the 906.Sy \&os 907capability. 908If the terminal is a printing terminal, 909with no soft copy unit, 910give it both 911.Sy \&hc 912and 913.Sy \&os . 914.Pf ( Sy \&os 915applies to storage scope terminals, 916such as the Tektronix 4010 series, 917as well as to hard copy and 918.Tn APL 919terminals.) 920If there is a code to move the cursor to the left edge of the current row, 921give this as 922.Sy \&cr . 923(Normally this will be carriage-return, 924.Sy \&^M . ) 925If there is a code to produce an audible signal (bell, beep, 926etc.), 927give this as 928.Sy \&bl . 929.Pp 930If there is a code (such as backspace) 931to move the cursor one position to the left, 932that capability should be given as 933.Sy \&le . 934Similarly, 935codes to move to the right, up, and down 936should be given as 937.Sy \&nd , 938.Sy \&up , 939and 940.Sy \&do , 941respectively. 942These 943.Em local cursor motions 944should not alter the text they pass over; 945for example, you would not normally use 946.Dq nd=\ \& 947unless the terminal has the 948.Sy \&os 949capability, 950because the space would erase the character moved over. 951.Pp 952A very important point here is that the local cursor motions encoded 953in 954.Nm 955have undefined behavior at the left and top edges of a 956.Tn CRT 957display. 958Programs should never attempt to backspace around the left edge, 959unless 960.Sy \&bw 961is given, and never attempt to go up off the top 962using local cursor motions. 963.Pp 964In order to scroll text up, 965a program goes to the bottom left corner of the screen and sends the 966.Sy \&sf 967(index) string. 968To scroll text down, 969a program goes to the top left corner of the screen and sends the 970.Sy \&sr 971(reverse index) string. 972The strings 973.Sy \&sf 974and 975.Sy \&sr 976have undefined behavior 977when not on their respective corners of the screen. 978Parameterized versions of the scrolling sequences are 979.Sy \&SF 980and 981.Sy \&SR , 982which have the same semantics as 983.Sy \&sf 984and 985.Sy \&sr 986except that they take one parameter 987and scroll that many lines. 988They also have undefined behavior 989except at the appropriate corner of the screen. 990.Pp 991The 992.Sy \&am 993capability tells whether the cursor sticks at the right 994edge of the screen when text is output there, 995but this does not necessarily apply to 996.Sy \&nd 997from the last column. 998Leftward local motion is defined from the left edge only when 999.Sy \&bw 1000is given; then an 1001.Sy \&le 1002from the left edge will move to the right edge of the previous row. 1003This is useful for drawing a box around the edge of the screen, 1004for example. 1005If the terminal has switch-selectable automatic margins, 1006the 1007.Nm 1008description usually assumes that this feature is on, 1009.Em i.e . , 1010.Sy \&am . 1011If the terminal has a command 1012that moves to the first column of the next line, 1013that command can be given as 1014.Sy \&nw 1015(newline). 1016It is permissible for this to clear the remainder of the current line, 1017so if the terminal has no correctly-working 1018.Tn \&CR 1019and 1020.Tn \&LF 1021it may still be possible to craft a working 1022.Sy \&nw 1023out of one or both of them. 1024.Pp 1025These capabilities suffice to describe hardcopy and 1026.Dq glass-tty 1027terminals. 1028Thus the Teletype model 33 is described as 1029.Bd -literal -offset indent 1030T3\||\|tty33\||\|33\||\|tty\||\|Teletype model 33:\e 1031 :bl=^G:co#72:cr=^M:do=^J:hc:os: 1032.Ed 1033.Pp 1034and the Lear Siegler 1035.Tn ADM Ns \-3 1036is described as 1037.Bd -literal -offset indent 1038l3\||\|adm3\||\|3\||\|LSI ADM-3:\e 1039:am:bl=^G:cl=^Z:co#80:cr=^M:do=^J:le=^H:li#24:sf=^J: 1040.Ed 1041.Ss Parameterized Strings 1042Cursor addressing and other strings requiring parameters 1043are described by a 1044parameterized string capability, with 1045.Xr printf 3 Ns \-like 1046escapes 1047.Sy \&%x 1048in it, 1049while other characters are passed through unchanged. 1050For example, to address the cursor the 1051.Sy \&cm 1052capability is given, using two parameters: the row and column to move to. 1053(Rows and columns are numbered from zero and refer to the physical screen 1054visible to the user, not to any unseen memory. 1055If the terminal has memory-relative cursor addressing, 1056that can be indicated by an analogous 1057.Sy \&CM 1058capability.) 1059.Pp 1060The 1061.Sy \&% 1062encodings have the following meanings: 1063.Bl -column xxxxx 1064.It "%% output `%'" 1065.It "%d output value as in" 1066.Xr printf 3 1067%d 1068.It "%2 output value as in" 1069.Xr printf 3 1070%2d 1071.It "%3 output value as in" 1072.Xr printf 3 1073%3d 1074.It "%. output value as in" 1075.Xr printf 3 1076%c 1077.It "%+" Ns Em x Ta No add 1078.Em x 1079to value, then do %. 1080.It "%>" Ns Em \&xy Ta No if 1081value > 1082.Em x 1083then add 1084.Em y , 1085no output 1086.It "%r reverse order of two parameters, no output" 1087.It "%i increment by one, no output" 1088.It "%n exclusive-or all parameters with 0140 (Datamedia 2500)" 1089.It "\&%B" Ta Tn BCD No "(16*(value/10)) + (value%10), no output" 1090.It "%D Reverse coding (value \- 2*(value%16)), no output (Delta Data)." 1091.El 1092.Pp 1093Consider the Hewlett-Packard 2645, which, to get to row 3 and column 12, needs 1094to be sent 1095.Dq \eE&a12c03Y 1096padded for 6 milliseconds. 1097Note that the order 1098of the row and column coordinates is reversed here 1099and that the row and column 1100are sent as two-digit integers. 1101Thus its 1102.Sy \&cm 1103capability is 1104.Dq Li cm=6\eE&%r%2c%2Y . 1105.Pp 1106The Datamedia 2500 needs the current row and column sent 1107encoded in binary using 1108.Dq \&%. . 1109Terminals that use 1110.Dq %.\& 1111need to be able to 1112backspace the cursor 1113.Pq Sy \&le 1114and to move the cursor up one line on the screen 1115.Pq Sy \&up . 1116This is necessary because it is not always safe to transmit 1117.Sy \&\en , 1118.Sy \&^D , 1119and 1120.Sy \&\er , 1121as the system may change or discard them. 1122(Programs using 1123.Nm 1124must set terminal modes so that tabs are not expanded, so 1125.Sy \&\et 1126is safe to send. 1127This turns out to be essential for the Ann Arbor 4080.) 1128.Pp 1129A final example is the Lear Siegler 1130.Tn ADM Ns \-3a , 1131which offsets row and column 1132by a blank character, thus 1133.Dq Li cm=\eE=%+ %+\ \& . 1134.Pp 1135Row or column absolute cursor addressing 1136can be given as single parameter capabilities 1137.Sy \&ch 1138(horizontal position absolute) and 1139.Sy \&cv 1140(vertical position absolute). 1141Sometimes these are shorter than the more general two-parameter sequence 1142(as with the Hewlett-Packard 2645) and can be used in preference to 1143.Sy \&cm . 1144If there are parameterized local motions 1145.Pf ( Em e.g . , 1146move 1147.Ar n 1148positions to the right) 1149these can be given as 1150.Sy \&DO , 1151.Sy \&LE , 1152.Sy \&RI , 1153and 1154.Sy \&UP 1155with a single parameter indicating how many positions to move. 1156These are primarily useful if the terminal does not have 1157.Sy \&cm , 1158such as the Tektronix 4025. 1159.Ss Cursor Motions 1160If the terminal has a fast way to home the cursor 1161(to the very upper left corner of the screen), this can be given as 1162.Sy \&ho . 1163Similarly, a fast way of getting to the lower left-hand corner 1164can be given as 1165.Sy \&ll ; 1166this may involve going up with 1167.Sy \&up 1168from the home position, 1169but a program should never do this itself (unless 1170.Sy \&ll 1171does), because it can 1172make no assumption about the effect of moving up from the home position. 1173Note that the home position is the same as 1174cursor address (0,0): to the top left corner of the screen, not of memory. 1175(Therefore, the 1176.Dq \eEH 1177sequence on Hewlett-Packard terminals 1178cannot be used for 1179.Sy \&ho . ) 1180.Ss Area Clears 1181If the terminal can clear from the current position to the end of the 1182line, leaving the cursor where it is, this should be given as 1183.Sy \&ce . 1184If the terminal can clear from the current position to the end of the 1185display, this should be given as 1186.Sy \&cd . 1187.Sy \&cd 1188must only be invoked from the first column of a line. 1189(Therefore, 1190it can be simulated by a request to delete a large number of lines, 1191if a true 1192.Sy \&cd 1193is not available.) 1194.Ss Insert/Delete Line 1195If the terminal can open a new blank line 1196before the line containing the cursor, 1197this should be given as 1198.Sy \&al ; 1199this must be invoked only from the first 1200position of a line. 1201The cursor must then appear at the left of the newly blank line. 1202If the terminal can delete the line that the cursor is on, this 1203should be given as 1204.Sy \&dl ; 1205this must only be used from the first position on 1206the line to be deleted. 1207Versions of 1208.Sy \&al 1209and 1210.Sy \&dl 1211which take a single parameter 1212and insert or delete that many lines 1213can be given as 1214.Sy \&AL 1215and 1216.Sy \&DL . 1217If the terminal has a settable scrolling region 1218(like the VT100), 1219the command to set this can be described with the 1220.Sy \&cs 1221capability, 1222which takes two parameters: the top and bottom lines of the scrolling region. 1223The cursor position is, alas, undefined after using this command. 1224It is possible to get the effect of insert or delete line 1225using this command \(em the 1226.Sy \&sc 1227and 1228.Sy \&rc 1229(save and restore cursor) commands are also useful. 1230Inserting lines at the top or bottom of the screen can also be done using 1231.Sy \&sr 1232or 1233.Sy \&sf 1234on many terminals without a true insert/delete line, 1235and is often faster even on terminals with those features. 1236.Pp 1237If the terminal has the ability to define a window as part of memory 1238which all commands affect, it should be given as the parameterized string 1239.Sy \&wi . 1240The four parameters are the starting and ending lines in memory 1241and the starting and ending columns in memory, in that order. 1242(This 1243.Xr terminfo 5 1244capability is described for completeness. 1245It is unlikely that any 1246.Nm Ns \-using 1247program will support it.) 1248.Pp 1249If the terminal can retain display memory above the screen, then the 1250.Sy \&da 1251capability should be given; 1252if display memory can be retained 1253below, then 1254.Sy \&db 1255should be given. 1256These indicate 1257that deleting a line or scrolling may bring non-blank lines up from below 1258or that scrolling back with 1259.Sy \&sr 1260may bring down non-blank lines. 1261.Ss Insert/Delete Character 1262There are two basic kinds of intelligent terminals with respect to 1263insert/delete character that can be described using 1264.Nm . 1265The most common insert/delete character operations affect only the characters 1266on the current line and shift characters off the end of the line rigidly. 1267Other terminals, such as the Concept\-100 and the Perkin Elmer Owl, make 1268a distinction between typed and untyped blanks on the screen, shifting 1269upon an insert or delete only to an untyped blank on the screen which is 1270either eliminated or expanded to two untyped blanks. 1271You can determine 1272the kind of terminal you have by clearing the screen then typing 1273text separated by cursor motions. 1274Type 1275.Dq Li abc\ \ \ \ def 1276using local 1277cursor motions (not spaces) between the 1278.Dq abc 1279and the 1280.Dq def . 1281Then position the cursor before the 1282.Dq abc 1283and put the terminal in insert 1284mode. 1285If typing characters causes the rest of the line to shift 1286rigidly and characters to fall off the end, then your terminal does 1287not distinguish between blanks and untyped positions. 1288If the 1289.Dq abc 1290shifts over to the 1291.Dq def 1292which then move together around the end of the 1293current line and onto the next as you insert, then you have the second type of 1294terminal and should give the capability 1295.Sy \&in , 1296which stands for 1297.Dq insert null . 1298While these are two logically separate attributes 1299(one line 1300.Em \&vs . 1301multi-line insert mode, 1302and special treatment of untyped spaces), 1303we have seen no terminals whose insert 1304mode cannot be described with the single attribute. 1305.Pp 1306The 1307.Nm 1308entries can describe both terminals that have an insert mode and terminals 1309that send a simple sequence to open a blank position on the current line. 1310Give as 1311.Sy \&im 1312the sequence to get into insert mode. 1313Give as 1314.Sy \&ei 1315the sequence to leave insert mode. 1316Now give as 1317.Sy \&ic 1318any sequence that needs to be sent just before 1319each character to be inserted. 1320Most terminals with a true insert mode 1321will not give 1322.Sy \&ic ; 1323terminals that use a sequence to open a screen 1324position should give it here. 1325(If your terminal has both, 1326insert mode is usually preferable to 1327.Sy \&ic . 1328Do not give both unless the terminal actually requires both to be used 1329in combination.) 1330If post-insert padding is needed, give this as a number of milliseconds 1331in 1332.Sy \&ip 1333(a string option). 1334Any other sequence that may need to be 1335sent after insertion of a single character can also be given in 1336.Sy \&ip . 1337If your terminal needs to be placed into an `insert mode' 1338and needs a special code preceding each inserted character, 1339then both 1340.Sy \&im Ns / Sy \&ei 1341and 1342.Sy \&ic 1343can be given, and both will be used. 1344The 1345.Sy \&IC 1346capability, with one parameter 1347.Em n , 1348will repeat the effects of 1349.Sy \&ic 1350.Em n 1351times. 1352.Pp 1353It is occasionally necessary to move around while in insert mode 1354to delete characters on the same line 1355.Pf ( Em e.g . , 1356if there is a tab after 1357the insertion position). 1358If your terminal allows motion while in 1359insert mode, you can give the capability 1360.Sy \&mi 1361to speed up inserting 1362in this case. 1363Omitting 1364.Sy \&mi 1365will affect only speed. 1366Some terminals 1367(notably Datamedia's) must not have 1368.Sy \&mi 1369because of the way their 1370insert mode works. 1371.Pp 1372Finally, you can specify 1373.Sy \&dc 1374to delete a single character, 1375.Sy \&DC 1376with one parameter 1377.Em n 1378to delete 1379.Em n 1380characters, 1381and delete mode by giving 1382.Sy \&dm 1383and 1384.Sy \&ed 1385to enter and exit delete mode 1386(which is any mode the terminal needs to be placed in for 1387.Sy \&dc 1388to work). 1389.Ss Highlighting, Underlining, and Visible Bells 1390If your terminal has one or more kinds of display attributes, 1391these can be represented in a number of different ways. 1392You should choose one display form as 1393.Em standout mode , 1394representing a good high-contrast, easy-on-the-eyes format 1395for highlighting error messages and other attention getters. 1396(If you have a choice, reverse video plus half-bright is good, 1397or reverse video alone.) 1398The sequences to enter and exit standout mode 1399are given as 1400.Sy \&so 1401and 1402.Sy \&se , 1403respectively. 1404If the code to change into or out of standout 1405mode leaves one or even two blank spaces or garbage characters on the screen, 1406as the 1407.Tn TVI 1408912 and Teleray 1061 do, 1409then 1410.Sy \&sg 1411should be given to tell how many characters are left. 1412.Pp 1413Codes to begin underlining and end underlining can be given as 1414.Sy \&us 1415and 1416.Sy \&ue , 1417respectively. 1418Underline mode change garbage is specified by 1419.Sy \&ug , 1420similar to 1421.Sy \&sg . 1422If the terminal has a code to underline the current character and move 1423the cursor one position to the right, 1424such as the Microterm Mime, 1425this can be given as 1426.Sy \&uc . 1427.Pp 1428Other capabilities to enter various highlighting modes include 1429.Sy \&mb 1430(blinking), 1431.Sy \&md 1432(bold or extra bright), 1433.Sy \&mh 1434(dim or half-bright), 1435.Sy \&mk 1436(blanking or invisible text), 1437.Sy \&mp 1438(protected), 1439.Sy \&mr 1440(reverse video), 1441.Sy \&me 1442(turn off 1443.Em all 1444attribute modes), 1445.Sy \&as 1446(enter alternate character set mode), and 1447.Sy \&ae 1448(exit alternate character set mode). 1449Turning on any of these modes singly may or may not turn off other modes. 1450.Pp 1451If there is a sequence to set arbitrary combinations of mode, 1452this should be given as 1453.Sy \&sa 1454(set attributes), taking 9 parameters. 1455Each parameter is either 0 or 1, 1456as the corresponding attributes is on or off. 1457The 9 parameters are, in order: standout, underline, reverse, blink, 1458dim, bold, blank, protect, and alternate character set. 1459Not all modes need be supported by 1460.Sy \&sa , 1461only those for which corresponding attribute commands exist. 1462(It is unlikely that a 1463.Nm Ns \-using 1464program will support this capability, which is defined for compatibility 1465with 1466.Xr terminfo 5 . ) 1467.Pp 1468Terminals with the 1469.Dq magic cookie 1470glitches 1471.Pf ( Sy \&sg 1472and 1473.Sy \&ug ) , 1474rather than maintaining extra attribute bits for each character cell, 1475instead deposit special 1476.Dq cookies , 1477or 1478.Dq garbage characters , 1479when they receive mode-setting sequences, 1480which affect the display algorithm. 1481.Pp 1482Some terminals, 1483such as the Hewlett-Packard 2621, 1484automatically leave standout 1485mode when they move to a new line or when the cursor is addressed. 1486Programs using standout mode 1487should exit standout mode on such terminals 1488before moving the cursor or sending a newline. 1489On terminals where this is not a problem, 1490the 1491.Sy \&ms 1492capability should be present 1493to say that this overhead is unnecessary. 1494.Pp 1495If the terminal has 1496a way of flashing the screen to indicate an error quietly 1497(a bell replacement), 1498this can be given as 1499.Sy \&vb ; 1500it must not move the cursor. 1501.Pp 1502If the cursor needs to be made more visible than normal 1503when it is not on the bottom line 1504(to change, for example, a non-blinking underline into an easier-to-find 1505block or blinking underline), 1506give this sequence as 1507.Sy \&vs . 1508If there is a way to make the cursor completely invisible, give that as 1509.Sy \&vi . 1510The capability 1511.Sy \&ve , 1512which undoes the effects of both of these modes, 1513should also be given. 1514.Pp 1515If your terminal correctly displays underlined characters 1516(with no special codes needed) 1517even though it does not overstrike, 1518then you should give the capability 1519.Sy \&ul . 1520If overstrikes are erasable with a blank, 1521this should be indicated by giving 1522.Sy \&eo . 1523.Ss Keypad 1524If the terminal has a keypad that transmits codes when the keys are pressed, 1525this information can be given. 1526Note that it is not possible to handle 1527terminals where the keypad only works in local mode 1528(this applies, for example, to the unshifted Hewlett-Packard 2621 keys). 1529If the keypad can be set to transmit or not transmit, 1530give these codes as 1531.Sy \&ks 1532and 1533.Sy \&ke . 1534Otherwise the keypad is assumed to always transmit. 1535The codes sent by the left-arrow, right-arrow, up-arrow, down-arrow, 1536and home keys can be given as 1537.Sy \&kl , 1538.Sy \&kr , 1539.Sy \&ku , 1540.Sy \&kd , 1541and 1542.Sy \&kh , 1543respectively. 1544If there are function keys such as f0, f1, ..., f9, the codes they send 1545can be given as 1546.Sy \&k0 , 1547.Sy \&k1 , 1548\&..., 1549.Sy \&k9 . 1550If these keys have labels other than the default f0 through f9, the labels 1551can be given as 1552.Sy \&l0 , 1553.Sy \&l1 , 1554\&..., 1555.Sy \&l9 . 1556The codes transmitted by certain other special keys can be given: 1557.Sy \&kH 1558(home down), 1559.Sy \&kb 1560(backspace), 1561.Sy \&ka 1562(clear all tabs), 1563.Sy \&kt 1564(clear the tab stop in this column), 1565.Sy \&kC 1566(clear screen or erase), 1567.Sy \&kD 1568(delete character), 1569.Sy \&kL 1570(delete line), 1571.Sy \&kM 1572(exit insert mode), 1573.Sy \&kE 1574(clear to end of line), 1575.Sy \&kS 1576(clear to end of screen), 1577.Sy \&kI 1578(insert character or enter insert mode), 1579.Sy \&kA 1580(insert line), 1581.Sy \&kN 1582(next page), 1583.Sy \&kP 1584(previous page), 1585.Sy \&kF 1586(scroll forward/down), 1587.Sy \&kR 1588(scroll backward/up), and 1589.Sy \&kT 1590(set a tab stop in this column). 1591In addition, if the keypad has a 3 by 3 array of keys 1592including the four arrow keys, then the other five keys can be given as 1593.Sy \&K1 , 1594.Sy \&K2 , 1595.Sy \&K3 , 1596.Sy \&K4 , 1597and 1598.Sy \&K5 . 1599These keys are useful when the effects of a 3 by 3 directional pad are needed. 1600The obsolete 1601.Sy \&ko 1602capability formerly used to describe 1603.Dq other 1604function keys has been 1605completely supplanted by the above capabilities. 1606.Pp 1607The 1608.Sy \&ma 1609entry is also used to indicate arrow keys on terminals that have 1610single-character arrow keys. 1611It is obsolete but still in use in 1612version 2 of 1613.Sy \&vi 1614which must be run on some minicomputers due to 1615memory limitations. 1616This field is redundant with 1617.Sy \&kl , 1618.Sy \&kr , 1619.Sy \&ku , 1620.Sy \&kd , 1621and 1622.Sy \&kh . 1623It consists of groups of two characters. 1624In each group, the first character is what an arrow key sends, and the 1625second character is the corresponding 1626.Sy \&vi 1627command. 1628These commands are 1629.Ar h 1630for 1631.Sy \&kl , 1632.Ar j 1633for 1634.Sy \&kd , 1635.Ar k 1636for 1637.Sy \&ku , 1638.Ar l 1639for 1640.Sy \&kr , 1641and 1642.Ar H 1643for 1644.Sy \&kh . 1645For example, the Mime would have 1646.Dq Li ma=^Hh^Kj^Zk^Xl 1647indicating arrow keys left (^H), down (^K), up (^Z), and right (^X). 1648(There is no home key on the Mime.) 1649.Ss Tabs and Initialization 1650If the terminal needs to be in a special mode when running 1651a program that uses these capabilities, 1652the codes to enter and exit this mode can be given as 1653.Sy \&ti 1654and 1655.Sy \&te . 1656This arises, for example, from terminals like the Concept with more than 1657one page of memory. 1658If the terminal has only memory-relative cursor addressing and not 1659screen-relative cursor addressing, 1660a screen-sized window must be fixed into 1661the display for cursor addressing to work properly. 1662This is also used for the Tektronix 4025, where 1663.Sy \&ti 1664sets the command character to be the one used by 1665.Nm . 1666.Pp 1667Other capabilities 1668include 1669.Sy \&is , 1670an initialization string for the terminal, 1671and 1672.Sy \&if , 1673the name of a file containing long initialization strings. 1674These strings are expected to set the terminal into modes 1675consistent with the rest of the 1676.Nm 1677description. 1678They are normally sent to the terminal by the 1679.Xr tset 1 1680program each time the user logs in. 1681They will be printed in the following order: 1682.Sy \&is ; 1683setting tabs using 1684.Sy \&ct 1685and 1686.Sy \&st ; 1687and finally 1688.Sy \&if . 1689.Pf ( Xr Terminfo 1690uses 1691.Sy \&i\&1-i2 1692instead of 1693.Sy \&is 1694and runs the program 1695.Sy \&iP 1696and prints 1697.Sy "\&i\&3" 1698after the other initializations.) 1699A pair of sequences that does a harder reset from a totally unknown state 1700can be analogously given as 1701.Sy \&rs 1702and 1703.Sy \&if . 1704These strings are output by the 1705.Xr reset 1 1706program, which is used when the terminal gets into a wedged state. 1707.Pf ( Xr Terminfo 1708uses 1709.Sy "\&r1-r3" 1710instead of 1711.Sy \&rs . ) 1712Commands are normally placed in 1713.Sy \&rs 1714and 1715.Sy \&rf 1716only if they produce annoying effects on the screen and are not necessary 1717when logging in. 1718For example, the command to set the VT100 into 80-column mode 1719would normally be part of 1720.Sy \&is , 1721but it causes an annoying glitch of the screen and is not normally needed 1722since the terminal is usually already in 80-column mode. 1723.Pp 1724If the terminal has hardware tabs, 1725the command to advance to the next tab stop can be given as 1726.Sy \&ta 1727(usually 1728.Sy \&^I ) . 1729A 1730.Dq backtab 1731command which moves leftward to the previous tab stop 1732can be given as 1733.Sy \&bt . 1734By convention, 1735if the terminal driver modes indicate that tab stops are being expanded 1736by the computer rather than being sent to the terminal, 1737programs should not use 1738.Sy \&ta 1739or 1740.Sy \&bt 1741even if they are present, 1742since the user may not have the tab stops properly set. 1743If the terminal has hardware tabs that are initially set every 1744.Ar n 1745positions when the terminal is powered up, then the numeric parameter 1746.Sy \&it 1747is given, showing the number of positions between tab stops. 1748This is normally used by the 1749.Xr tset 1 1750command to determine whether to set the driver mode for hardware tab 1751expansion, and whether to set the tab stops. 1752If the terminal has tab stops that can be saved in nonvolatile memory, the 1753.Nm 1754description can assume that they are properly set. 1755.Pp 1756If there are commands to set and clear tab stops, they can be given as 1757.Sy \&ct 1758(clear all tab stops) and 1759.Sy \&st 1760(set a tab stop in the current column of every row). 1761If a more complex sequence is needed to set the tabs than can be 1762described by this, the sequence can be placed in 1763.Sy \&is 1764or 1765.Sy \&if . 1766.Ss Delays 1767Certain capabilities control padding in the terminal driver. 1768These are primarily needed by hardcopy terminals and are used by the 1769.Xr tset 1 1770program to set terminal driver modes appropriately. 1771Delays embedded in the capabilities 1772.Sy \&cr , 1773.Sy \&sf , 1774.Sy \&le , 1775.Sy \&ff , 1776and 1777.Sy \&ta 1778will cause the appropriate delay bits to be set in the terminal driver. 1779If 1780.Sy \&pb 1781(padding baud rate) is given, these values can be ignored at baud rates 1782below the value of 1783.Sy \&pb . 1784For 1785.Bx 4.2 1786.Xr tset 1 , 1787the delays are given as numeric capabilities 1788.Sy \&dC , 1789.Sy \&dN , 1790.Sy \&dB , 1791.Sy \&dF , 1792and 1793.Sy \&dT 1794instead. 1795.Ss Miscellaneous 1796If the terminal requires other than a 1797.Dv NUL 1798(zero) character as a pad, 1799this can be given as 1800.Sy \&pc . 1801Only the first character of the 1802.Sy \&pc 1803string is used. 1804.Pp 1805If the terminal has commands to save and restore the position of the 1806cursor, give them as 1807.Sy \&sc 1808and 1809.Sy \&rc . 1810.Pp 1811If the terminal has an extra 1812.Dq status line 1813that is not normally used by 1814software, this fact can be indicated. 1815If the status line is viewed as an extra line below the bottom line, 1816then the capability 1817.Sy \&hs 1818should be given. 1819Special strings to go to a position in the status line and to return 1820from the status line can be given as 1821.Sy \&ts 1822and 1823.Sy \&fs . 1824.Pf ( Sy \&fs 1825must leave the cursor position in the same place that it was before 1826.Sy \&ts . 1827If necessary, the 1828.Sy \&sc 1829and 1830.Sy \&rc 1831strings can be included in 1832.Sy \&ts 1833and 1834.Sy \&fs 1835to get this effect.) 1836The capability 1837.Sy \&ts 1838takes one parameter, which is the column number of the status line 1839to which the cursor is to be moved. 1840If escape sequences and other special commands such as tab work while in 1841the status line, the flag 1842.Sy \&es 1843can be given. 1844A string that turns off the status line (or otherwise erases its contents) 1845should be given as 1846.Sy \&ds . 1847The status line is normally assumed to be the same width as the 1848rest of the screen, 1849.Em i.e . , 1850.Sy \&co . 1851If the status line is a different width (possibly because the terminal 1852does not allow an entire line to be loaded), then its width in columns 1853can be indicated with the numeric parameter 1854.Sy \&ws . 1855.Pp 1856If the terminal can move up or down half a line, this can be 1857indicated with 1858.Sy \&hu 1859(half-line up) and 1860.Sy \&hd 1861(half-line down). 1862This is primarily useful for superscripts and subscripts on hardcopy 1863terminals. 1864If a hardcopy terminal can eject to the next page (form feed), 1865give this as 1866.Sy \&ff 1867(usually 1868.Sy \&^L ) . 1869.Pp 1870If there is a command to repeat a given character a given number of times 1871(to save time transmitting a large number of identical characters), 1872this can be indicated with the parameterized string 1873.Sy \&rp . 1874The first parameter is the character to be repeated and the second is 1875the number of times to repeat it. 1876(This is a 1877.Xr terminfo 5 1878feature that is unlikely to be supported by a program that uses 1879.Nm . ) 1880.Pp 1881If the terminal has a settable command character, such as the 1882Tektronix 4025, this can be indicated with 1883.Sy \&CC . 1884A prototype command character is chosen which is used in all capabilities. 1885This character is given in the 1886.Sy \&CC 1887capability to identify it. 1888The following convention is supported on some 1889.Ux 1890systems: 1891The environment is to be searched for a 1892.Ev \&CC 1893variable, 1894and if found, 1895all occurrences of the prototype character are replaced by the character 1896in the environment variable. 1897This use of the 1898.Ev \&CC 1899environment variable 1900is a very bad idea, as it conflicts with 1901.Xr make 1 . 1902.Pp 1903Terminal descriptions that do not represent a specific kind of known 1904terminal, such as 1905.Em switch , 1906.Em dialup , 1907.Em patch , 1908and 1909.Em network , 1910should include the 1911.Sy \&gn 1912(generic) capability so that programs can complain that they do not know 1913how to talk to the terminal. 1914(This capability does not apply to 1915.Em virtual 1916terminal descriptions for which the escape sequences are known.) 1917.Pp 1918If the terminal uses xoff/xon 1919.Pq Tn DC3 Ns / Ns Tn DC1 1920handshaking for flow control, give 1921.Sy \&xo . 1922Padding information should still be included so that routines can make 1923better decisions about costs, but actual pad characters will not be 1924transmitted. 1925.Pp 1926If the terminal has a 1927.Dq meta key 1928which acts as a shift key, setting the 19298th bit of any character transmitted, then this fact can be indicated with 1930.Sy \&km . 1931Otherwise, software will assume that the 8th bit is parity and it will 1932usually be cleared. 1933If strings exist to turn this 1934.Dq meta mode 1935on and off, they can be given as 1936.Sy \&mm 1937and 1938.Sy \&mo . 1939.Pp 1940If the terminal has more lines of memory than will fit on the screen at once, 1941the number of lines of memory can be indicated with 1942.Sy \&lm . 1943An explicit value of 0 indicates that the number of lines is not fixed, 1944but that there is still more memory than fits on the screen. 1945.Pp 1946If the terminal is one of those supported by the 1947.Ux 1948system virtual 1949terminal protocol, the terminal number can be given as 1950.Sy \&vt . 1951.Pp 1952Media copy strings which control an auxiliary printer 1953connected to the terminal can be given as 1954.Sy \&ps : 1955print the contents of the screen; 1956.Sy \&pf : 1957turn off the printer; and 1958.Sy \&po : 1959turn on the printer. 1960When the printer is on, all text sent to the terminal will be sent to the 1961printer. 1962It is undefined whether the text is also displayed on the terminal screen 1963when the printer is on. 1964A variation 1965.Sy \&pO 1966takes one parameter and leaves the printer on for as many characters as the 1967value of the parameter, then turns the printer off. 1968The parameter should not exceed 255. 1969All text, including 1970.Sy \&pf , 1971is transparently passed to the printer while 1972.Sy \&pO 1973is in effect. 1974.Pp 1975Strings to program function keys can be given as 1976.Sy \&pk , 1977.Sy \&pl , 1978and 1979.Sy \&px . 1980Each of these strings takes two parameters: the function key number 1981to program (from 0 to 9) and the string to program it with. 1982Function key numbers out of this range may program undefined keys 1983in a terminal-dependent manner. 1984The differences among the capabilities are that 1985.Sy \&pk 1986causes pressing the given key to be the same as the user typing the given 1987string; 1988.Sy \&pl 1989causes the string to be executed by the terminal in local mode; 1990and 1991.Sy \&px 1992causes the string to be transmitted to the computer. 1993Unfortunately, due to lack of a definition for string parameters in 1994.Nm , 1995only 1996.Xr terminfo 5 1997supports these capabilities. 1998.Pp 1999For the 2000.Xr xterm 1 2001terminal emulator the traditional behavior in 2002.Fx 2003when exiting a pager such as 2004.Xr less 1 2005or 2006.Xr more 1 , 2007or an editor such as 2008.Xr vi 1 2009is 2010.Em NOT 2011to clear the screen after the program exits. 2012If you prefer to clear the screen there are a number of 2013.Dq xterm-clear 2014entries that add this capability in the 2015.Nm 2016file that you can use directly, or as examples. 2017.Ss Glitches and Braindamage 2018Hazeltine terminals, which do not allow `~' characters to be displayed, 2019should indicate 2020.Sy \&hz . 2021.Pp 2022The 2023.Sy \&nc 2024capability, now obsolete, formerly indicated Datamedia terminals, 2025which echo 2026.Sy \&\er \en 2027for 2028carriage return then ignore a following linefeed. 2029.Pp 2030Terminals that ignore a linefeed immediately after an 2031.Sy \&am 2032wrap, such as the Concept, should indicate 2033.Sy \&xn . 2034.Pp 2035If 2036.Sy \&ce 2037is required to get rid of standout 2038(instead of merely writing normal text on top of it), 2039.Sy \&xs 2040should be given. 2041.Pp 2042Teleray terminals, where tabs turn all characters moved over to blanks, 2043should indicate 2044.Sy \&xt 2045(destructive tabs). 2046This glitch is also taken to mean that it is not possible 2047to position the cursor on top of a 2048.Dq magic cookie , 2049and that 2050to erase standout mode it is necessary to use delete and insert line. 2051.Pp 2052The Beehive Superbee, which is unable to correctly transmit the 2053.Dv ESC 2054or 2055.Sy \&^C 2056characters, has 2057.Sy \&xb , 2058indicating that the 2059.Dq \&f\&1 2060key is used for 2061.Dv ESC 2062and 2063.Dq \&f\&2 2064for ^C. 2065(Only certain Superbees have this problem, depending on the 2066.Tn ROM . ) 2067.Pp 2068Other specific terminal problems may be corrected by adding more 2069capabilities of the form 2070.Sy x Ns Em x . 2071.Ss Similar Terminals 2072If there are two very similar terminals, 2073one can be defined as being just like the other with certain exceptions. 2074The string capability 2075.Sy \&tc 2076can be given 2077with the name of the similar terminal. 2078This capability must be 2079.Em last , 2080and the combined length of the entries 2081must not exceed 1024. 2082The capabilities given before 2083.Sy \&tc 2084override those in the terminal type invoked by 2085.Sy \&tc . 2086A capability can be canceled by placing 2087.Sy \&xx@ 2088to the left of the 2089.Sy \&tc 2090invocation, where 2091.Sy \&xx 2092is the capability. 2093For example, the entry 2094.Bd -literal -offset indent 2095hn\||\|2621\-nl:ks@:ke@:tc=2621: 2096.Ed 2097.Pp 2098defines a 2099.Dq 2621\-nl 2100that does not have the 2101.Sy \&ks 2102or 2103.Sy \&ke 2104capabilities, 2105hence does not turn on the function key labels when in visual mode. 2106This is useful for different modes for a terminal, or for different 2107user preferences. 2108.Sh FILES 2109.Bl -tag -width /usr/share/misc/termcap.db -compact 2110.It Pa /usr/share/misc/termcap 2111File containing terminal descriptions. 2112.It Pa /usr/share/misc/termcap.db 2113Hash database file containing terminal descriptions (see 2114.Xr cap_mkdb 1 ) . 2115.El 2116.Sh SEE ALSO 2117.Xr cap_mkdb 1 , 2118.Xr ex 1 , 2119.Xr more 1 , 2120.Xr tset 1 , 2121.Xr ul 1 , 2122.Xr vi 1 , 2123.Xr xterm 1 , 2124.Xr ncurses 3 , 2125.Xr printf 3 , 2126.Xr termcap 3 , 2127.Xr term 5 2128.Sh CAVEATS AND BUGS 2129The 2130.Em Note : 2131.Nm 2132functions 2133were replaced by 2134.Xr terminfo 5 2135in 2136.At V 2137Release 2.0. 2138The transition will be relatively painless if capabilities flagged as 2139.Dq obsolete 2140are avoided. 2141.Pp 2142Lines and columns are now stored by the kernel as well as in the termcap 2143entry. 2144Most programs now use the kernel information primarily; the information 2145in this file is used only if the kernel does not have any information. 2146.Pp 2147The 2148.Xr \&vi 1 2149program allows only 256 characters for string capabilities, and the routines 2150in 2151.Xr termlib 3 2152do not check for overflow of this buffer. 2153The total length of a single entry (excluding only escaped newlines) 2154may not exceed 1024. 2155.Pp 2156Not all programs support all entries. 2157.Sh HISTORY 2158The 2159.Nm 2160file format appeared in 2161.Bx 3 . 2162