1# $FreeBSD$ 2# 3# Option file for FreeBSD /usr/src builds, at least the userland and boot loader 4# portions of the tree. These options generally chose what parts of the tree to 5# include or omit and are FreeBSD source tree specific. 6# 7# Users define WITH_FOO and WITHOUT_FOO on the command line or in /etc/src.conf 8# and /etc/make.conf files. These translate in the build system to MK_FOO={yes,no} 9# with sensible (usually) defaults. 10# 11# Makefiles must include bsd.opts.mk after defining specific MK_FOO options that 12# are applicable for that Makefile (typically there are none, but sometimes there 13# are exceptions). Recursive makes usually add MK_FOO=no for options that they wish 14# to omit from that make. 15# 16# Makefiles must include bsd.mkopt.mk before they test the value of any MK_FOO 17# variable. 18# 19# Makefiles may also assume that this file is included by src.opts.mk should it 20# need variables defined there prior to the end of the Makefile where 21# bsd.{subdir,lib.bin}.mk is traditionally included. 22# 23# The old-style YES_FOO and NO_FOO are being phased out. No new instances of them 24# should be added. Old instances should be removed since they were just to 25# bridge the gap between FreeBSD 4 and FreeBSD 5. 26# 27# Makefiles should never test WITH_FOO or WITHOUT_FOO directly (although an 28# exception is made for _WITHOUT_SRCONF which turns off this mechanism 29# completely inside bsd.*.mk files). 30# 31 32.if !target(__<src.opts.mk>__) 33__<src.opts.mk>__: 34 35.include <bsd.own.mk> 36 37# 38# Define MK_* variables (which are either "yes" or "no") for users 39# to set via WITH_*/WITHOUT_* in /etc/src.conf and override in the 40# make(1) environment. 41# These should be tested with `== "no"' or `!= "no"' in makefiles. 42# The NO_* variables should only be set by makefiles for variables 43# that haven't been converted over. 44# 45 46# These options are used by the src builds. Those listed in 47# __DEFAULT_YES_OPTIONS default to 'yes' and will build unless turned 48# off. __DEFAULT_NO_OPTIONS will default to 'no' and won't build 49# unless turned on. Any options listed in 'BROKEN_OPTIONS' will be 50# hard-wired to 'no'. "Broken" here means not working or 51# not-appropriate and/or not supported. It doesn't imply something is 52# wrong with the code. There's not a single good word for this, so 53# BROKEN was selected as the least imperfect one considered at the 54# time. Options are added to BROKEN_OPTIONS list on a per-arch basis. 55# At this time, there's no provision for mutually incompatible options. 56# Options listed in 'REQUIRED_OPTIONS' will be hard-wired to 'yes'; this 57# is intended as a transitional measure while options are in the process 58# of being removed. 59 60__DEFAULT_YES_OPTIONS = \ 61 ACCT \ 62 ACPI \ 63 APM \ 64 AT \ 65 AUDIT \ 66 AUTHPF \ 67 AUTOFS \ 68 BHYVE \ 69 BLACKLIST \ 70 BLUETOOTH \ 71 BOOT \ 72 BOOTPARAMD \ 73 BOOTPD \ 74 BSD_CPIO \ 75 BSDINSTALL \ 76 BSNMP \ 77 BZIP2 \ 78 CALENDAR \ 79 CAROOT \ 80 CCD \ 81 CDDL \ 82 CLANG \ 83 CLANG_BOOTSTRAP \ 84 CLEAN \ 85 CPP \ 86 CROSS_COMPILER \ 87 CRYPT \ 88 CUSE \ 89 CXGBETOOL \ 90 DIALOG \ 91 DICT \ 92 DMAGENT \ 93 DTRACE \ 94 DYNAMICROOT \ 95 EE \ 96 EFI \ 97 ELFTOOLCHAIN_BOOTSTRAP \ 98 EXAMPLES \ 99 FILE \ 100 FINGER \ 101 FLOPPY \ 102 FORTH \ 103 FP_LIBC \ 104 FREEBSD_UPDATE \ 105 FTP \ 106 GAMES \ 107 GH_BC \ 108 GNU_DIFF \ 109 GOOGLETEST \ 110 GPIO \ 111 HAST \ 112 HTML \ 113 HYPERV \ 114 ICONV \ 115 INET \ 116 INET6 \ 117 INETD \ 118 IPFILTER \ 119 IPFW \ 120 ISCSI \ 121 JAIL \ 122 KDUMP \ 123 KVM \ 124 LDNS \ 125 LDNS_UTILS \ 126 LEGACY_CONSOLE \ 127 LLD \ 128 LLD_BOOTSTRAP \ 129 LLD_IS_LD \ 130 LLVM_ASSERTIONS \ 131 LLVM_COV \ 132 LLVM_CXXFILT \ 133 LOADER_GELI \ 134 LOADER_KBOOT \ 135 LOADER_LUA \ 136 LOADER_OFW \ 137 LOADER_UBOOT \ 138 LOCALES \ 139 LOCATE \ 140 LPR \ 141 LS_COLORS \ 142 MACHDEP_OPTIMIZATIONS \ 143 MAIL \ 144 MAILWRAPPER \ 145 MAKE \ 146 MLX5TOOL \ 147 NETCAT \ 148 NETGRAPH \ 149 NETLINK \ 150 NETLINK_SUPPORT \ 151 NLS_CATALOGS \ 152 NS_CACHING \ 153 NTP \ 154 NVME \ 155 OFED \ 156 OPENSSL \ 157 PAM \ 158 PF \ 159 PKGBOOTSTRAP \ 160 PMC \ 161 PPP \ 162 PTHREADS_ASSERTIONS \ 163 QUOTAS \ 164 RADIUS_SUPPORT \ 165 RBOOTD \ 166 RESCUE \ 167 ROUTED \ 168 SENDMAIL \ 169 SERVICESDB \ 170 SETUID_LOGIN \ 171 SHAREDOCS \ 172 SOURCELESS \ 173 SOURCELESS_HOST \ 174 SOURCELESS_UCODE \ 175 STATS \ 176 SYSCONS \ 177 SYSTEM_COMPILER \ 178 SYSTEM_LINKER \ 179 TALK \ 180 TCP_WRAPPERS \ 181 TCSH \ 182 TELNET \ 183 TEXTPROC \ 184 TFTP \ 185 UNBOUND \ 186 USB \ 187 UTMPX \ 188 VI \ 189 VT \ 190 WIRELESS \ 191 WPA_SUPPLICANT_EAPOL \ 192 ZFS \ 193 LOADER_ZFS \ 194 ZONEINFO 195 196__DEFAULT_NO_OPTIONS = \ 197 BEARSSL \ 198 BHYVE_SNAPSHOT \ 199 CLANG_EXTRAS \ 200 CLANG_FORMAT \ 201 DETECT_TZ_CHANGES \ 202 DISK_IMAGE_TOOLS_BOOTSTRAP \ 203 DTRACE_ASAN \ 204 DTRACE_TESTS \ 205 EXPERIMENTAL \ 206 HESIOD \ 207 LOADER_VERBOSE \ 208 LOADER_VERIEXEC_PASS_MANIFEST \ 209 LLVM_BINUTILS \ 210 MALLOC_PRODUCTION \ 211 OFED_EXTRA \ 212 OPENLDAP \ 213 REPRODUCIBLE_BUILD \ 214 RPCBIND_WARMSTART_SUPPORT \ 215 SORT_THREADS \ 216 ZONEINFO_LEAPSECONDS_SUPPORT \ 217 218__REQUIRED_OPTIONS = \ 219 CAPSICUM \ 220 CASPER 221 222# LEFT/RIGHT. Left options which default to "yes" unless their corresponding 223# RIGHT option is disabled. 224__DEFAULT_DEPENDENT_OPTIONS= \ 225 CLANG_FULL/CLANG \ 226 LLVM_TARGET_ALL/CLANG \ 227 LOADER_VERIEXEC/BEARSSL \ 228 LOADER_EFI_SECUREBOOT/LOADER_VERIEXEC \ 229 LOADER_VERIEXEC_VECTX/LOADER_VERIEXEC \ 230 VERIEXEC/BEARSSL \ 231 232# MK_*_SUPPORT options which default to "yes" unless their corresponding 233# MK_* variable is set to "no". 234# 235.for var in \ 236 BLACKLIST \ 237 BZIP2 \ 238 INET \ 239 INET6 \ 240 KERBEROS \ 241 KVM \ 242 NETGRAPH \ 243 PAM \ 244 TESTS \ 245 WIRELESS 246__DEFAULT_DEPENDENT_OPTIONS+= ${var}_SUPPORT/${var} 247.endfor 248 249# 250# Default behaviour of some options depends on the architecture. Unfortunately 251# this means that we have to test TARGET_ARCH (the buildworld case) as well 252# as MACHINE_ARCH (the non-buildworld case). Normally TARGET_ARCH is not 253# used at all in bsd.*.mk, but we have to make an exception here if we want 254# to allow defaults for some things like clang to vary by target architecture. 255# Additional, per-target behavior should be rarely added only after much 256# gnashing of teeth and grinding of gears. 257# 258.if defined(TARGET_ARCH) 259__T=${TARGET_ARCH} 260.else 261__T=${MACHINE_ARCH} 262.endif 263 264# All supported backends for LLVM_TARGET_XXX 265__LLVM_TARGETS= \ 266 aarch64 \ 267 arm \ 268 powerpc \ 269 riscv \ 270 x86 271__LLVM_TARGET_FILT= C/(amd64|i386)/x86/:C/powerpc.*/powerpc/:C/armv[67]/arm/:C/riscv.*/riscv/ 272.for __llt in ${__LLVM_TARGETS} 273# Default enable the given TARGET's LLVM_TARGET support 274.if ${__T:${__LLVM_TARGET_FILT}} == ${__llt} 275__DEFAULT_YES_OPTIONS+= LLVM_TARGET_${__llt:${__LLVM_TARGET_FILT}:tu} 276# aarch64 needs arm for -m32 support. 277.elif ${__T} == "aarch64" && ${__llt:Marm*} != "" 278__DEFAULT_DEPENDENT_OPTIONS+= LLVM_TARGET_ARM/LLVM_TARGET_AARCH64 279# Default the rest of the LLVM_TARGETs to the value of MK_LLVM_TARGET_ALL. 280.else 281__DEFAULT_DEPENDENT_OPTIONS+= LLVM_TARGET_${__llt:${__LLVM_TARGET_FILT}:tu}/LLVM_TARGET_ALL 282.endif 283.endfor 284 285__DEFAULT_NO_OPTIONS+=LLVM_TARGET_BPF LLVM_TARGET_MIPS 286 287.include <bsd.compiler.mk> 288 289.if ${__T} == "i386" || ${__T} == "amd64" 290__DEFAULT_NO_OPTIONS += FDT 291.else 292__DEFAULT_YES_OPTIONS += FDT 293.endif 294 295.if ${__T:Marm*} == "" && ${__T:Mriscv64*} == "" 296__DEFAULT_YES_OPTIONS+=LLDB 297.else 298__DEFAULT_NO_OPTIONS+=LLDB 299.endif 300# LIB32 is not supported on all 64-bit architectures. 301.if (${__T} == "amd64" || ${__T:Maarch64*} != "" || ${__T} == "powerpc64") 302__DEFAULT_YES_OPTIONS+=LIB32 303.else 304BROKEN_OPTIONS+=LIB32 305.endif 306# EFI doesn't exist on powerpc (well, officially) and doesn't work on i386 307.if ${__T:Mpowerpc*} || ${__T} == "i386" 308BROKEN_OPTIONS+=EFI 309.endif 310# OFW is only for powerpc, exclude others 311.if ${__T:Mpowerpc*} == "" 312BROKEN_OPTIONS+=LOADER_OFW 313.endif 314# KBOOT is only for powerpc64 (powerpc64le broken) amd64 and aarch64 315.if ${__T} != "powerpc64" && ${__T} != "amd64" && ${__T} != "aarch64" 316BROKEN_OPTIONS+=LOADER_KBOOT 317.endif 318# UBOOT is only for arm, and big-endian powerpc 319.if (${__T:Marm*} == "" && ${__T:Mpowerpc*} == "") || ${__T} == "powerpc64le" 320BROKEN_OPTIONS+=LOADER_UBOOT 321.endif 322# GELI and Lua in loader currently cause boot failures on powerpc. 323# Further debugging is required -- probably they are just broken on big 324# endian systems generically (they jump to null pointers or try to read 325# crazy high addresses, which is typical of endianness problems). 326.if ${__T:Mpowerpc*} 327BROKEN_OPTIONS+=LOADER_GELI LOADER_LUA 328.endif 329 330# Kernel TLS is enabled by default on amd64, aarch64 and powerpc64* 331.if ${__T} == "aarch64" || ${__T} == "amd64" || ${__T:Mpowerpc64*} != "" 332__DEFAULT_YES_OPTIONS+=OPENSSL_KTLS 333.else 334__DEFAULT_NO_OPTIONS+=OPENSSL_KTLS 335.endif 336 337.if ${__T} != "aarch64" && ${__T} != "amd64" && ${__T} != "i386" && \ 338 ${__T:Mpowerpc64*} == "" 339BROKEN_OPTIONS+=CXGBETOOL 340BROKEN_OPTIONS+=MLX5TOOL 341.endif 342 343.if ${__T} != "amd64" && ${__T} != "i386" && ${__T} != "aarch64" 344BROKEN_OPTIONS+=HYPERV 345.endif 346 347# NVME is only aarch64, x86 and powerpc64* 348.if ${__T} != "aarch64" && ${__T} != "amd64" && ${__T} != "i386" && \ 349 ${__T:Mpowerpc64*} == "" 350BROKEN_OPTIONS+=NVME 351.endif 352 353.if ${__T} == "aarch64" || ${__T} == "amd64" || ${__T} == "i386" || \ 354 ${__T:Mpowerpc64*} != "" || ${__T:Mriscv64*} != "" 355__DEFAULT_YES_OPTIONS+=OPENMP 356.else 357__DEFAULT_NO_OPTIONS+=OPENMP 358.endif 359 360# Broken on 32-bit arm, kernel module compile errors 361.if ${__T:Marm*} != "" 362BROKEN_OPTIONS+= OFED 363.endif 364 365# MK_host_egacy is set by local.sys.mk so is valid here 366.if ${MACHINE} == "host" && ${MK_host_egacy} == "yes" 367# we cannot expect tests to work 368BROKEN_OPTIONS+= TESTS 369.endif 370 371.-include <site.src.opts.mk> 372 373.include <bsd.mkopt.mk> 374 375# 376# Force some options off if their dependencies are off. 377# Order is somewhat important. 378# 379.if ${MK_CAPSICUM} == "no" 380MK_CASPER:= no 381.endif 382 383.if ${MK_SOURCELESS} == "no" 384MK_SOURCELESS_HOST:= no 385MK_SOURCELESS_UCODE:= no 386.endif 387 388.if ${MK_CDDL} == "no" 389MK_CTF:= no 390MK_DTRACE:= no 391MK_LOADER_ZFS:= no 392MK_ZFS:= no 393.endif 394 395.if ${MK_CRYPT} == "no" 396MK_OPENSSL:= no 397MK_OPENSSH:= no 398MK_KERBEROS:= no 399MK_KERBEROS_SUPPORT:= no 400.endif 401 402.if ${MK_DIALOG} == "no" 403MK_BSDINSTALL:= no 404.endif 405 406.if ${MK_DTRACE} == "no" 407MK_CTF:= no 408.endif 409 410.if ${MK_MAIL} == "no" 411MK_MAILWRAPPER:= no 412MK_SENDMAIL:= no 413MK_DMAGENT:= no 414.endif 415 416.if ${MK_NETGRAPH} == "no" 417MK_BLUETOOTH:= no 418.endif 419 420.if ${MK_NLS} == "no" 421MK_NLS_CATALOGS:= no 422.endif 423 424.if ${MK_OPENSSL} == "no" 425MK_DMAGENT:= no 426MK_OPENSSH:= no 427MK_OPENSSL_KTLS:= no 428MK_KERBEROS:= no 429MK_KERBEROS_SUPPORT:= no 430MK_LDNS:= no 431MK_PKGBOOTSTRAP:= no 432MK_LOADER_ZFS:= no 433MK_ZFS:= no 434.endif 435 436.if ${MK_LDNS} == "no" 437MK_LDNS_UTILS:= no 438MK_UNBOUND:= no 439.endif 440 441.if ${MK_PF} == "no" 442MK_AUTHPF:= no 443.endif 444 445.if ${MK_OFED} == "no" 446MK_OFED_EXTRA:= no 447.endif 448 449.if ${MK_TESTS} == "no" 450MK_DTRACE_TESTS:= no 451.endif 452 453.if ${MK_TESTS_SUPPORT} == "no" 454MK_GOOGLETEST:= no 455.endif 456 457.if ${MK_ZONEINFO} == "no" 458MK_ZONEINFO_LEAPSECONDS_SUPPORT:= no 459.endif 460 461.if ${MK_CROSS_COMPILER} == "no" 462MK_CLANG_BOOTSTRAP:= no 463MK_ELFTOOLCHAIN_BOOTSTRAP:= no 464MK_LLD_BOOTSTRAP:= no 465.endif 466 467.if ${MK_TOOLCHAIN} == "no" 468MK_CLANG:= no 469MK_LLD:= no 470MK_LLDB:= no 471MK_LLVM_BINUTILS:= no 472.endif 473 474.if ${MK_CLANG} == "no" 475MK_CLANG_EXTRAS:= no 476MK_CLANG_FORMAT:= no 477MK_CLANG_FULL:= no 478MK_LLVM_COV:= no 479.endif 480 481.if ${MK_ASAN} == "yes" 482# In order to get sensible backtraces from ASAN we have to install 483# llvm-symbolizer as /usr/bin/addr2line instead of the elftoolchain version. 484MK_LLVM_BINUTILS:= yes 485.endif 486 487.if ${MK_LLVM_BINUTILS} == "yes" 488# MK_LLVM_CXXFILT is a subset of MK_LLVM_BINUTILS and should therefore be 489# enabled if MK_LLVM_BINUTILS is set. 490MK_LLVM_CXXFILT:= yes 491.endif 492 493.if ${MK_LOADER_VERIEXEC} == "no" 494MK_LOADER_VERIEXEC_PASS_MANIFEST := no 495.endif 496 497# 498# MK_* options whose default value depends on another option. 499# 500.for vv in \ 501 GSSAPI/KERBEROS \ 502 MAN_UTILS/MAN 503.if defined(WITH_${vv:H}) 504MK_${vv:H}:= yes 505.elif defined(WITHOUT_${vv:H}) 506MK_${vv:H}:= no 507.else 508MK_${vv:H}:= ${MK_${vv:T}} 509.endif 510.endfor 511 512# 513# Set defaults for the MK_*_SUPPORT variables. 514# 515 516.endif # !target(__<src.opts.mk>__) 517