1# $FreeBSD$ 2# 3# Option file for FreeBSD /usr/src builds. 4# 5# Users define WITH_FOO and WITHOUT_FOO on the command line or in /etc/src.conf 6# and /etc/make.conf files. These translate in the build system to MK_FOO={yes,no} 7# with sensible (usually) defaults. 8# 9# Makefiles must include bsd.opts.mk after defining specific MK_FOO options that 10# are applicable for that Makefile (typically there are none, but sometimes there 11# are exceptions). Recursive makes usually add MK_FOO=no for options that they wish 12# to omit from that make. 13# 14# Makefiles must include bsd.mkopt.mk before they test the value of any MK_FOO 15# variable. 16# 17# Makefiles may also assume that this file is included by src.opts.mk should it 18# need variables defined there prior to the end of the Makefile where 19# bsd.{subdir,lib.bin}.mk is traditionally included. 20# 21# The old-style YES_FOO and NO_FOO are being phased out. No new instances of them 22# should be added. Old instances should be removed since they were just to 23# bridge the gap between FreeBSD 4 and FreeBSD 5. 24# 25# Makefiles should never test WITH_FOO or WITHOUT_FOO directly (although an 26# exception is made for _WITHOUT_SRCONF which turns off this mechanism 27# completely inside bsd.*.mk files). 28# 29 30.if !target(__<src.opts.mk>__) 31__<src.opts.mk>__: 32 33.include <bsd.own.mk> 34 35# 36# Define MK_* variables (which are either "yes" or "no") for users 37# to set via WITH_*/WITHOUT_* in /etc/src.conf and override in the 38# make(1) environment. 39# These should be tested with `== "no"' or `!= "no"' in makefiles. 40# The NO_* variables should only be set by makefiles for variables 41# that haven't been converted over. 42# 43 44# These options are used by the src builds. Those listed in 45# __DEFAULT_YES_OPTIONS default to 'yes' and will build unless turned 46# off. __DEFAULT_NO_OPTIONS will default to 'no' and won't build 47# unless turned on. Any options listed in 'BROKEN_OPTIONS' will be 48# hard-wired to 'no'. "Broken" here means not working or 49# not-appropriate and/or not supported. It doesn't imply something is 50# wrong with the code. There's not a single good word for this, so 51# BROKEN was selected as the least imperfect one considered at the 52# time. Options are added to BROKEN_OPTIONS list on a per-arch basis. 53# At this time, there's no provision for mutually incompatible options. 54 55__DEFAULT_YES_OPTIONS = \ 56 ACCT \ 57 ACPI \ 58 APM \ 59 AT \ 60 ATM \ 61 AUDIT \ 62 AUTHPF \ 63 AUTOFS \ 64 BHYVE \ 65 BLACKLIST \ 66 BLUETOOTH \ 67 BOOT \ 68 BOOTPARAMD \ 69 BOOTPD \ 70 BSD_CPIO \ 71 BSDINSTALL \ 72 BSNMP \ 73 BZIP2 \ 74 CALENDAR \ 75 CAPSICUM \ 76 CAROOT \ 77 CASPER \ 78 CCD \ 79 CDDL \ 80 CLANG \ 81 CLANG_BOOTSTRAP \ 82 CLANG_IS_CC \ 83 CLEAN \ 84 CPP \ 85 CROSS_COMPILER \ 86 CRYPT \ 87 CUSE \ 88 CXX \ 89 CXGBETOOL \ 90 DIALOG \ 91 DICT \ 92 DMAGENT \ 93 DYNAMICROOT \ 94 EE \ 95 EFI \ 96 ELFTOOLCHAIN_BOOTSTRAP \ 97 EXAMPLES \ 98 FDT \ 99 FILE \ 100 FINGER \ 101 FLOPPY \ 102 FORTH \ 103 FP_LIBC \ 104 FREEBSD_UPDATE \ 105 FTP \ 106 GAMES \ 107 GH_BC \ 108 GNU_DIFF \ 109 GOOGLETEST \ 110 GPIO \ 111 HAST \ 112 HTML \ 113 HYPERV \ 114 ICONV \ 115 INET \ 116 INET6 \ 117 INETD \ 118 IPFILTER \ 119 IPFW \ 120 ISCSI \ 121 JAIL \ 122 KDUMP \ 123 KVM \ 124 LDNS \ 125 LDNS_UTILS \ 126 LEGACY_CONSOLE \ 127 LLD \ 128 LLD_BOOTSTRAP \ 129 LLD_IS_LD \ 130 LLVM_ASSERTIONS \ 131 LLVM_COV \ 132 LLVM_CXXFILT \ 133 LOADER_GELI \ 134 LOADER_LUA \ 135 LOADER_OFW \ 136 LOADER_UBOOT \ 137 LOCALES \ 138 LOCATE \ 139 LPR \ 140 LS_COLORS \ 141 MAIL \ 142 MAILWRAPPER \ 143 MAKE \ 144 MLX5TOOL \ 145 NDIS \ 146 NETCAT \ 147 NETGRAPH \ 148 NLS_CATALOGS \ 149 NS_CACHING \ 150 NTP \ 151 NVME \ 152 OFED \ 153 OPENSSL \ 154 PAM \ 155 PF \ 156 PKGBOOTSTRAP \ 157 PMC \ 158 PORTSNAP \ 159 PPP \ 160 QUOTAS \ 161 RADIUS_SUPPORT \ 162 RBOOTD \ 163 RESCUE \ 164 ROUTED \ 165 SENDMAIL \ 166 SERVICESDB \ 167 SETUID_LOGIN \ 168 SHARED_TOOLCHAIN \ 169 SHAREDOCS \ 170 SOURCELESS \ 171 SOURCELESS_HOST \ 172 SOURCELESS_UCODE \ 173 STATS \ 174 SYSCONS \ 175 SYSTEM_COMPILER \ 176 SYSTEM_LINKER \ 177 TALK \ 178 TCP_WRAPPERS \ 179 TCSH \ 180 TELNET \ 181 TEXTPROC \ 182 TFTP \ 183 UNBOUND \ 184 USB \ 185 UTMPX \ 186 VI \ 187 VT \ 188 WIRELESS \ 189 WPA_SUPPLICANT_EAPOL \ 190 ZFS \ 191 LOADER_ZFS \ 192 ZONEINFO 193 194__DEFAULT_NO_OPTIONS = \ 195 BEARSSL \ 196 BHYVE_SNAPSHOT \ 197 CLANG_EXTRAS \ 198 CLANG_FORMAT \ 199 DETECT_TZ_CHANGES \ 200 DTRACE_TESTS \ 201 EXPERIMENTAL \ 202 HESIOD \ 203 LIBSOFT \ 204 LOADER_FIREWIRE \ 205 LOADER_VERBOSE \ 206 LOADER_VERIEXEC_PASS_MANIFEST \ 207 LLVM_BINUTILS \ 208 MALLOC_PRODUCTION \ 209 OFED_EXTRA \ 210 OPENLDAP \ 211 REPRODUCIBLE_BUILD \ 212 RPCBIND_WARMSTART_SUPPORT \ 213 SORT_THREADS \ 214 ZONEINFO_LEAPSECONDS_SUPPORT \ 215 216# LEFT/RIGHT. Left options which default to "yes" unless their corresponding 217# RIGHT option is disabled. 218__DEFAULT_DEPENDENT_OPTIONS= \ 219 CLANG_FULL/CLANG \ 220 LLVM_TARGET_ALL/CLANG \ 221 LOADER_VERIEXEC/BEARSSL \ 222 LOADER_EFI_SECUREBOOT/LOADER_VERIEXEC \ 223 LOADER_VERIEXEC_VECTX/LOADER_VERIEXEC \ 224 VERIEXEC/BEARSSL \ 225 226# MK_*_SUPPORT options which default to "yes" unless their corresponding 227# MK_* variable is set to "no". 228# 229.for var in \ 230 BLACKLIST \ 231 BZIP2 \ 232 INET \ 233 INET6 \ 234 KERBEROS \ 235 KVM \ 236 NETGRAPH \ 237 PAM \ 238 TESTS \ 239 WIRELESS 240__DEFAULT_DEPENDENT_OPTIONS+= ${var}_SUPPORT/${var} 241.endfor 242 243# 244# Default behaviour of some options depends on the architecture. Unfortunately 245# this means that we have to test TARGET_ARCH (the buildworld case) as well 246# as MACHINE_ARCH (the non-buildworld case). Normally TARGET_ARCH is not 247# used at all in bsd.*.mk, but we have to make an exception here if we want 248# to allow defaults for some things like clang to vary by target architecture. 249# Additional, per-target behavior should be rarely added only after much 250# gnashing of teeth and grinding of gears. 251# 252.if defined(TARGET_ARCH) 253__T=${TARGET_ARCH} 254.else 255__T=${MACHINE_ARCH} 256.endif 257 258# All supported backends for LLVM_TARGET_XXX 259__LLVM_TARGETS= \ 260 aarch64 \ 261 arm \ 262 powerpc \ 263 riscv \ 264 x86 265__LLVM_TARGET_FILT= C/(amd64|i386)/x86/:C/powerpc.*/powerpc/:C/armv[67]/arm/:C/riscv.*/riscv/:C/mips.*/mips/ 266.for __llt in ${__LLVM_TARGETS} 267# Default enable the given TARGET's LLVM_TARGET support 268.if ${__T:${__LLVM_TARGET_FILT}} == ${__llt} 269__DEFAULT_YES_OPTIONS+= LLVM_TARGET_${__llt:${__LLVM_TARGET_FILT}:tu} 270# aarch64 needs arm for -m32 support. 271.elif ${__T} == "aarch64" && ${__llt:Marm*} != "" 272__DEFAULT_DEPENDENT_OPTIONS+= LLVM_TARGET_ARM/LLVM_TARGET_AARCH64 273# Default the rest of the LLVM_TARGETs to the value of MK_LLVM_TARGET_ALL. 274.else 275__DEFAULT_DEPENDENT_OPTIONS+= LLVM_TARGET_${__llt:${__LLVM_TARGET_FILT}:tu}/LLVM_TARGET_ALL 276.endif 277.endfor 278 279__DEFAULT_NO_OPTIONS+=LLVM_TARGET_BPF LLVM_TARGET_MIPS 280 281.include <bsd.compiler.mk> 282 283.if ${__T:Mriscv*} != "" 284BROKEN_OPTIONS+=OFED 285.endif 286.if ${__T} == "aarch64" || ${__T} == "amd64" || ${__T} == "i386" 287__DEFAULT_YES_OPTIONS+=LLDB 288.else 289__DEFAULT_NO_OPTIONS+=LLDB 290.endif 291# LIB32 is supported on amd64, mips64, and powerpc64 292.if (${__T} == "amd64" || ${__T:Mmips64*} || ${__T} == "powerpc64") 293__DEFAULT_YES_OPTIONS+=LIB32 294.else 295BROKEN_OPTIONS+=LIB32 296.endif 297# Only doing soft float API stuff on armv6 and armv7 298.if ${__T} != "armv6" && ${__T} != "armv7" 299BROKEN_OPTIONS+=LIBSOFT 300.endif 301.if ${__T:Mmips*} 302# GOOGLETEST cannot currently be compiled on mips due to external circumstances. 303# Notably, the freebsd-gcc port isn't linking in libgcc so we end up trying ot 304# link to a hidden symbol. LLVM would successfully link this in, but some of 305# the mips variants are broken under LLVM until LLVM 10. GOOGLETEST should be 306# marked no longer broken with the switch to LLVM. 307BROKEN_OPTIONS+=GOOGLETEST SSP 308.endif 309# EFI doesn't exist on mips or powerpc. 310.if ${__T:Mmips*} || ${__T:Mpowerpc*} 311BROKEN_OPTIONS+=EFI 312.endif 313# OFW is only for powerpc, exclude others 314.if ${__T:Mpowerpc*} == "" 315BROKEN_OPTIONS+=LOADER_OFW 316.endif 317# UBOOT is only for arm, and big-endian powerpc 318.if (${__T:Marm*} == "" && ${__T:Mpowerpc*} == "") || ${__T} == "powerpc64le" 319BROKEN_OPTIONS+=LOADER_UBOOT 320.endif 321# GELI and Lua in loader currently cause boot failures on powerpc. 322# Further debugging is required -- probably they are just broken on big 323# endian systems generically (they jump to null pointers or try to read 324# crazy high addresses, which is typical of endianness problems). 325.if ${__T:Mpowerpc*} 326BROKEN_OPTIONS+=LOADER_GELI LOADER_LUA 327.endif 328 329# Kernel TLS is enabled by default on amd64 and aarch64 330.if ${__T} == "aarch64" || ${__T} == "amd64" 331__DEFAULT_YES_OPTIONS+=OPENSSL_KTLS 332.else 333__DEFAULT_NO_OPTIONS+=OPENSSL_KTLS 334.endif 335 336.if ${__T:Mmips64*} 337# profiling won't work on MIPS64 because there is only assembly for o32 338BROKEN_OPTIONS+=PROFILE 339.endif 340.if ${__T} != "aarch64" && ${__T} != "amd64" && ${__T} != "i386" && \ 341 ${__T} != "powerpc64" 342BROKEN_OPTIONS+=CXGBETOOL 343BROKEN_OPTIONS+=MLX5TOOL 344.endif 345 346# HyperV is currently x86-only 347.if ${__T} != "amd64" && ${__T} != "i386" 348BROKEN_OPTIONS+=HYPERV 349.endif 350 351# NVME is only aarch64, x86 and powerpc64* 352.if ${__T} != "aarch64" && ${__T} != "amd64" && ${__T} != "i386" && \ 353 ${__T:Mpowerpc64*} == "" 354BROKEN_OPTIONS+=NVME 355.endif 356 357.if ${__T} == "aarch64" || ${__T} == "amd64" || ${__T} == "i386" || \ 358 ${__T:Mpowerpc64*} != "" || ${__T:Mriscv64*} != "" 359__DEFAULT_YES_OPTIONS+=OPENMP 360.else 361__DEFAULT_NO_OPTIONS+=OPENMP 362.endif 363 364.include <bsd.mkopt.mk> 365 366# 367# Force some options off if their dependencies are off. 368# Order is somewhat important. 369# 370.if ${MK_CAPSICUM} == "no" 371MK_CASPER:= no 372.endif 373 374.if ${MK_SOURCELESS} == "no" 375MK_SOURCELESS_HOST:= no 376MK_SOURCELESS_UCODE:= no 377.endif 378 379.if ${MK_CDDL} == "no" 380MK_ZFS:= no 381MK_LOADER_ZFS:= no 382MK_CTF:= no 383.endif 384 385.if ${MK_CRYPT} == "no" 386MK_OPENSSL:= no 387MK_OPENSSH:= no 388MK_KERBEROS:= no 389MK_KERBEROS_SUPPORT:= no 390.endif 391 392.if ${MK_CXX} == "no" 393MK_CLANG:= no 394MK_GOOGLETEST:= no 395MK_OFED:= no 396MK_OPENMP:= no 397MK_PMC:= no 398MK_TESTS:= no 399.endif 400 401.if ${MK_DIALOG} == "no" 402MK_BSDINSTALL:= no 403.endif 404 405.if ${MK_MAIL} == "no" 406MK_MAILWRAPPER:= no 407MK_SENDMAIL:= no 408MK_DMAGENT:= no 409.endif 410 411.if ${MK_NETGRAPH} == "no" 412MK_ATM:= no 413MK_BLUETOOTH:= no 414.endif 415 416.if ${MK_NLS} == "no" 417MK_NLS_CATALOGS:= no 418.endif 419 420.if ${MK_OPENSSL} == "no" 421MK_DMAGENT:= no 422MK_OPENSSH:= no 423MK_OPENSSL_KTLS:= no 424MK_KERBEROS:= no 425MK_KERBEROS_SUPPORT:= no 426MK_LDNS:= no 427MK_PKGBOOTSTRAP:= no 428MK_ZFS:= no 429.endif 430 431.if ${MK_LDNS} == "no" 432MK_LDNS_UTILS:= no 433MK_UNBOUND:= no 434.endif 435 436.if ${MK_PF} == "no" 437MK_AUTHPF:= no 438.endif 439 440.if ${MK_OFED} == "no" 441MK_OFED_EXTRA:= no 442.endif 443 444.if ${MK_TESTS} == "no" 445MK_DTRACE_TESTS:= no 446.endif 447 448.if ${MK_TESTS_SUPPORT} == "no" 449MK_GOOGLETEST:= no 450.endif 451 452.if ${MK_ZONEINFO} == "no" 453MK_ZONEINFO_LEAPSECONDS_SUPPORT:= no 454.endif 455 456.if ${MK_CROSS_COMPILER} == "no" 457MK_CLANG_BOOTSTRAP:= no 458MK_ELFTOOLCHAIN_BOOTSTRAP:= no 459MK_LLD_BOOTSTRAP:= no 460.endif 461 462.if ${MK_TOOLCHAIN} == "no" 463MK_CLANG:= no 464MK_INCLUDES:= no 465MK_LLD:= no 466MK_LLDB:= no 467MK_LLVM_BINUTILS:= no 468.endif 469 470.if ${MK_CLANG} == "no" 471MK_CLANG_EXTRAS:= no 472MK_CLANG_FORMAT:= no 473MK_CLANG_FULL:= no 474MK_LLVM_COV:= no 475.endif 476 477.if ${MK_ASAN} == "yes" 478# In order to get sensible backtraces from ASAN we have to install 479# llvm-symbolizer as /usr/bin/addr2line instead of the elftoolchain version. 480MK_LLVM_BINUTILS:= yes 481.endif 482 483.if ${MK_LLVM_BINUTILS} == "yes" 484# MK_LLVM_CXXFILT is a subset of MK_LLVM_BINUTILS and should therefore be 485# enabled if MK_LLVM_BINUTILS is set. 486MK_LLVM_CXXFILT:= yes 487.endif 488 489.if ${MK_LOADER_VERIEXEC} == "no" 490MK_LOADER_VERIEXEC_PASS_MANIFEST := no 491.endif 492 493# 494# MK_* options whose default value depends on another option. 495# 496.for vv in \ 497 GSSAPI/KERBEROS \ 498 MAN_UTILS/MAN 499.if defined(WITH_${vv:H}) 500MK_${vv:H}:= yes 501.elif defined(WITHOUT_${vv:H}) 502MK_${vv:H}:= no 503.else 504MK_${vv:H}:= ${MK_${vv:T}} 505.endif 506.endfor 507 508# 509# Set defaults for the MK_*_SUPPORT variables. 510# 511 512.endif # !target(__<src.opts.mk>__) 513