1# $FreeBSD$ 2# 3# Option file for FreeBSD /usr/src builds, at least the userland and boot loader 4# portions of the tree. These options generally chose what parts of the tree to 5# include or omit and are FreeBSD source tree specific. 6# 7# Users define WITH_FOO and WITHOUT_FOO on the command line or in /etc/src.conf 8# and /etc/make.conf files. These translate in the build system to MK_FOO={yes,no} 9# with sensible (usually) defaults. 10# 11# Makefiles must include bsd.opts.mk after defining specific MK_FOO options that 12# are applicable for that Makefile (typically there are none, but sometimes there 13# are exceptions). Recursive makes usually add MK_FOO=no for options that they wish 14# to omit from that make. 15# 16# Makefiles must include bsd.mkopt.mk before they test the value of any MK_FOO 17# variable. 18# 19# Makefiles may also assume that this file is included by src.opts.mk should it 20# need variables defined there prior to the end of the Makefile where 21# bsd.{subdir,lib.bin}.mk is traditionally included. 22# 23# The old-style YES_FOO and NO_FOO are being phased out. No new instances of them 24# should be added. Old instances should be removed since they were just to 25# bridge the gap between FreeBSD 4 and FreeBSD 5. 26# 27# Makefiles should never test WITH_FOO or WITHOUT_FOO directly (although an 28# exception is made for _WITHOUT_SRCONF which turns off this mechanism 29# completely inside bsd.*.mk files). 30# 31 32.if !target(__<src.opts.mk>__) 33__<src.opts.mk>__: 34 35.include <bsd.own.mk> 36 37# 38# Define MK_* variables (which are either "yes" or "no") for users 39# to set via WITH_*/WITHOUT_* in /etc/src.conf and override in the 40# make(1) environment. 41# These should be tested with `== "no"' or `!= "no"' in makefiles. 42# The NO_* variables should only be set by makefiles for variables 43# that haven't been converted over. 44# 45 46# These options are used by the src builds. Those listed in 47# __DEFAULT_YES_OPTIONS default to 'yes' and will build unless turned 48# off. __DEFAULT_NO_OPTIONS will default to 'no' and won't build 49# unless turned on. Any options listed in 'BROKEN_OPTIONS' will be 50# hard-wired to 'no'. "Broken" here means not working or 51# not-appropriate and/or not supported. It doesn't imply something is 52# wrong with the code. There's not a single good word for this, so 53# BROKEN was selected as the least imperfect one considered at the 54# time. Options are added to BROKEN_OPTIONS list on a per-arch basis. 55# At this time, there's no provision for mutually incompatible options. 56 57__DEFAULT_YES_OPTIONS = \ 58 ACCT \ 59 ACPI \ 60 APM \ 61 AT \ 62 ATM \ 63 AUDIT \ 64 AUTHPF \ 65 AUTOFS \ 66 BHYVE \ 67 BLACKLIST \ 68 BLUETOOTH \ 69 BOOT \ 70 BOOTPARAMD \ 71 BOOTPD \ 72 BSD_CPIO \ 73 BSDINSTALL \ 74 BSNMP \ 75 BZIP2 \ 76 CALENDAR \ 77 CAPSICUM \ 78 CAROOT \ 79 CASPER \ 80 CCD \ 81 CDDL \ 82 CLANG \ 83 CLANG_BOOTSTRAP \ 84 CLANG_IS_CC \ 85 CLEAN \ 86 CPP \ 87 CROSS_COMPILER \ 88 CRYPT \ 89 CUSE \ 90 CXX \ 91 CXGBETOOL \ 92 DIALOG \ 93 DICT \ 94 DMAGENT \ 95 DYNAMICROOT \ 96 EE \ 97 EFI \ 98 ELFTOOLCHAIN_BOOTSTRAP \ 99 EXAMPLES \ 100 FDT \ 101 FILE \ 102 FINGER \ 103 FLOPPY \ 104 FORTH \ 105 FP_LIBC \ 106 FREEBSD_UPDATE \ 107 FTP \ 108 GAMES \ 109 GH_BC \ 110 GNU_DIFF \ 111 GOOGLETEST \ 112 GPIO \ 113 HAST \ 114 HTML \ 115 HYPERV \ 116 ICONV \ 117 INET \ 118 INET6 \ 119 INETD \ 120 IPFILTER \ 121 IPFW \ 122 ISCSI \ 123 JAIL \ 124 KDUMP \ 125 KVM \ 126 LDNS \ 127 LDNS_UTILS \ 128 LEGACY_CONSOLE \ 129 LLD \ 130 LLD_BOOTSTRAP \ 131 LLD_IS_LD \ 132 LLVM_ASSERTIONS \ 133 LLVM_COV \ 134 LLVM_CXXFILT \ 135 LOADER_GELI \ 136 LOADER_KBOOT \ 137 LOADER_LUA \ 138 LOADER_OFW \ 139 LOADER_UBOOT \ 140 LOCALES \ 141 LOCATE \ 142 LPR \ 143 LS_COLORS \ 144 MAIL \ 145 MAILWRAPPER \ 146 MAKE \ 147 MLX5TOOL \ 148 NDIS \ 149 NETCAT \ 150 NETGRAPH \ 151 NLS_CATALOGS \ 152 NS_CACHING \ 153 NTP \ 154 NVME \ 155 OFED \ 156 OPENSSL \ 157 PAM \ 158 PF \ 159 PKGBOOTSTRAP \ 160 PMC \ 161 PORTSNAP \ 162 PPP \ 163 QUOTAS \ 164 RADIUS_SUPPORT \ 165 RBOOTD \ 166 RESCUE \ 167 ROUTED \ 168 SENDMAIL \ 169 SERVICESDB \ 170 SETUID_LOGIN \ 171 SHARED_TOOLCHAIN \ 172 SHAREDOCS \ 173 SOURCELESS \ 174 SOURCELESS_HOST \ 175 SOURCELESS_UCODE \ 176 STATS \ 177 SYSCONS \ 178 SYSTEM_COMPILER \ 179 SYSTEM_LINKER \ 180 TALK \ 181 TCP_WRAPPERS \ 182 TCSH \ 183 TELNET \ 184 TEXTPROC \ 185 TFTP \ 186 UNBOUND \ 187 USB \ 188 UTMPX \ 189 VI \ 190 VT \ 191 WIRELESS \ 192 WPA_SUPPLICANT_EAPOL \ 193 ZFS \ 194 LOADER_ZFS \ 195 ZONEINFO 196 197__DEFAULT_NO_OPTIONS = \ 198 BEARSSL \ 199 BHYVE_SNAPSHOT \ 200 CLANG_EXTRAS \ 201 CLANG_FORMAT \ 202 DETECT_TZ_CHANGES \ 203 DTRACE_TESTS \ 204 EXPERIMENTAL \ 205 HESIOD \ 206 LIBSOFT \ 207 LOADER_FIREWIRE \ 208 LOADER_VERBOSE \ 209 LOADER_VERIEXEC_PASS_MANIFEST \ 210 LLVM_BINUTILS \ 211 MALLOC_PRODUCTION \ 212 OFED_EXTRA \ 213 OPENLDAP \ 214 REPRODUCIBLE_BUILD \ 215 RPCBIND_WARMSTART_SUPPORT \ 216 SORT_THREADS \ 217 ZONEINFO_LEAPSECONDS_SUPPORT \ 218 219# LEFT/RIGHT. Left options which default to "yes" unless their corresponding 220# RIGHT option is disabled. 221__DEFAULT_DEPENDENT_OPTIONS= \ 222 CLANG_FULL/CLANG \ 223 LLVM_TARGET_ALL/CLANG \ 224 LOADER_VERIEXEC/BEARSSL \ 225 LOADER_EFI_SECUREBOOT/LOADER_VERIEXEC \ 226 LOADER_VERIEXEC_VECTX/LOADER_VERIEXEC \ 227 VERIEXEC/BEARSSL \ 228 229# MK_*_SUPPORT options which default to "yes" unless their corresponding 230# MK_* variable is set to "no". 231# 232.for var in \ 233 BLACKLIST \ 234 BZIP2 \ 235 INET \ 236 INET6 \ 237 KERBEROS \ 238 KVM \ 239 NETGRAPH \ 240 PAM \ 241 TESTS \ 242 WIRELESS 243__DEFAULT_DEPENDENT_OPTIONS+= ${var}_SUPPORT/${var} 244.endfor 245 246# 247# Default behaviour of some options depends on the architecture. Unfortunately 248# this means that we have to test TARGET_ARCH (the buildworld case) as well 249# as MACHINE_ARCH (the non-buildworld case). Normally TARGET_ARCH is not 250# used at all in bsd.*.mk, but we have to make an exception here if we want 251# to allow defaults for some things like clang to vary by target architecture. 252# Additional, per-target behavior should be rarely added only after much 253# gnashing of teeth and grinding of gears. 254# 255.if defined(TARGET_ARCH) 256__T=${TARGET_ARCH} 257.else 258__T=${MACHINE_ARCH} 259.endif 260 261# All supported backends for LLVM_TARGET_XXX 262__LLVM_TARGETS= \ 263 aarch64 \ 264 arm \ 265 powerpc \ 266 riscv \ 267 x86 268__LLVM_TARGET_FILT= C/(amd64|i386)/x86/:C/powerpc.*/powerpc/:C/armv[67]/arm/:C/riscv.*/riscv/:C/mips.*/mips/ 269.for __llt in ${__LLVM_TARGETS} 270# Default enable the given TARGET's LLVM_TARGET support 271.if ${__T:${__LLVM_TARGET_FILT}} == ${__llt} 272__DEFAULT_YES_OPTIONS+= LLVM_TARGET_${__llt:${__LLVM_TARGET_FILT}:tu} 273# aarch64 needs arm for -m32 support. 274.elif ${__T} == "aarch64" && ${__llt:Marm*} != "" 275__DEFAULT_DEPENDENT_OPTIONS+= LLVM_TARGET_ARM/LLVM_TARGET_AARCH64 276# Default the rest of the LLVM_TARGETs to the value of MK_LLVM_TARGET_ALL. 277.else 278__DEFAULT_DEPENDENT_OPTIONS+= LLVM_TARGET_${__llt:${__LLVM_TARGET_FILT}:tu}/LLVM_TARGET_ALL 279.endif 280.endfor 281 282__DEFAULT_NO_OPTIONS+=LLVM_TARGET_BPF LLVM_TARGET_MIPS 283 284.include <bsd.compiler.mk> 285 286.if ${__T} == "aarch64" || ${__T} == "amd64" || ${__T} == "i386" 287__DEFAULT_YES_OPTIONS+=LLDB 288.else 289__DEFAULT_NO_OPTIONS+=LLDB 290.endif 291# LIB32 is supported on amd64, mips64, and powerpc64 292.if (${__T} == "amd64" || ${__T:Mmips64*} || ${__T} == "powerpc64") 293__DEFAULT_YES_OPTIONS+=LIB32 294.else 295BROKEN_OPTIONS+=LIB32 296.endif 297# Only doing soft float API stuff on armv6 and armv7 298.if ${__T} != "armv6" && ${__T} != "armv7" 299BROKEN_OPTIONS+=LIBSOFT 300.endif 301.if ${__T:Mmips*} 302# GOOGLETEST cannot currently be compiled on mips due to external circumstances. 303# Notably, the freebsd-gcc port isn't linking in libgcc so we end up trying ot 304# link to a hidden symbol. LLVM would successfully link this in, but some of 305# the mips variants are broken under LLVM until LLVM 10. GOOGLETEST should be 306# marked no longer broken with the switch to LLVM. 307BROKEN_OPTIONS+=GOOGLETEST SSP 308.endif 309# EFI doesn't exist on mips or powerpc. 310.if ${__T:Mmips*} || ${__T:Mpowerpc*} 311BROKEN_OPTIONS+=EFI 312.endif 313# OFW is only for powerpc, exclude others 314.if ${__T:Mpowerpc*} == "" 315BROKEN_OPTIONS+=LOADER_OFW 316.endif 317# KBOOT is only for powerpc64 (powerpc64le broken) 318.if ${__T} != "powerpc64" 319BROKEN_OPTIONS+=LOADER_KBOOT 320.endif 321# UBOOT is only for arm, and big-endian powerpc 322.if (${__T:Marm*} == "" && ${__T:Mpowerpc*} == "") || ${__T} == "powerpc64le" 323BROKEN_OPTIONS+=LOADER_UBOOT 324.endif 325# GELI and Lua in loader currently cause boot failures on powerpc. 326# Further debugging is required -- probably they are just broken on big 327# endian systems generically (they jump to null pointers or try to read 328# crazy high addresses, which is typical of endianness problems). 329.if ${__T:Mpowerpc*} 330BROKEN_OPTIONS+=LOADER_GELI LOADER_LUA 331.endif 332 333# Kernel TLS is enabled by default on amd64 and aarch64 334.if ${__T} == "aarch64" || ${__T} == "amd64" 335__DEFAULT_YES_OPTIONS+=OPENSSL_KTLS 336.else 337__DEFAULT_NO_OPTIONS+=OPENSSL_KTLS 338.endif 339 340.if ${__T:Mmips64*} 341# profiling won't work on MIPS64 because there is only assembly for o32 342BROKEN_OPTIONS+=PROFILE 343.endif 344.if ${__T} != "aarch64" && ${__T} != "amd64" && ${__T} != "i386" && \ 345 ${__T} != "powerpc64" 346BROKEN_OPTIONS+=CXGBETOOL 347BROKEN_OPTIONS+=MLX5TOOL 348.endif 349 350# HyperV is currently x86-only 351.if ${__T} != "amd64" && ${__T} != "i386" 352BROKEN_OPTIONS+=HYPERV 353.endif 354 355# NVME is only aarch64, x86 and powerpc64* 356.if ${__T} != "aarch64" && ${__T} != "amd64" && ${__T} != "i386" && \ 357 ${__T:Mpowerpc64*} == "" 358BROKEN_OPTIONS+=NVME 359.endif 360 361.if ${__T} == "aarch64" || ${__T} == "amd64" || ${__T} == "i386" || \ 362 ${__T:Mpowerpc64*} != "" || ${__T:Mriscv64*} != "" 363__DEFAULT_YES_OPTIONS+=OPENMP 364.else 365__DEFAULT_NO_OPTIONS+=OPENMP 366.endif 367 368.include <bsd.mkopt.mk> 369 370# 371# Force some options off if their dependencies are off. 372# Order is somewhat important. 373# 374.if ${MK_CAPSICUM} == "no" 375MK_CASPER:= no 376.endif 377 378.if ${MK_SOURCELESS} == "no" 379MK_SOURCELESS_HOST:= no 380MK_SOURCELESS_UCODE:= no 381.endif 382 383.if ${MK_CDDL} == "no" 384MK_ZFS:= no 385MK_LOADER_ZFS:= no 386MK_CTF:= no 387.endif 388 389.if ${MK_CRYPT} == "no" 390MK_OPENSSL:= no 391MK_OPENSSH:= no 392MK_KERBEROS:= no 393MK_KERBEROS_SUPPORT:= no 394.endif 395 396.if ${MK_CXX} == "no" 397MK_CLANG:= no 398MK_GOOGLETEST:= no 399MK_OFED:= no 400MK_OPENMP:= no 401MK_PMC:= no 402MK_TESTS:= no 403.endif 404 405.if ${MK_DIALOG} == "no" 406MK_BSDINSTALL:= no 407.endif 408 409.if ${MK_MAIL} == "no" 410MK_MAILWRAPPER:= no 411MK_SENDMAIL:= no 412MK_DMAGENT:= no 413.endif 414 415.if ${MK_NETGRAPH} == "no" 416MK_ATM:= no 417MK_BLUETOOTH:= no 418.endif 419 420.if ${MK_NLS} == "no" 421MK_NLS_CATALOGS:= no 422.endif 423 424.if ${MK_OPENSSL} == "no" 425MK_DMAGENT:= no 426MK_OPENSSH:= no 427MK_OPENSSL_KTLS:= no 428MK_KERBEROS:= no 429MK_KERBEROS_SUPPORT:= no 430MK_LDNS:= no 431MK_PKGBOOTSTRAP:= no 432MK_ZFS:= no 433.endif 434 435.if ${MK_LDNS} == "no" 436MK_LDNS_UTILS:= no 437MK_UNBOUND:= no 438.endif 439 440.if ${MK_PF} == "no" 441MK_AUTHPF:= no 442.endif 443 444.if ${MK_OFED} == "no" 445MK_OFED_EXTRA:= no 446.endif 447 448.if ${MK_TESTS} == "no" 449MK_DTRACE_TESTS:= no 450.endif 451 452.if ${MK_TESTS_SUPPORT} == "no" 453MK_GOOGLETEST:= no 454.endif 455 456.if ${MK_ZONEINFO} == "no" 457MK_ZONEINFO_LEAPSECONDS_SUPPORT:= no 458.endif 459 460.if ${MK_CROSS_COMPILER} == "no" 461MK_CLANG_BOOTSTRAP:= no 462MK_ELFTOOLCHAIN_BOOTSTRAP:= no 463MK_LLD_BOOTSTRAP:= no 464.endif 465 466.if ${MK_TOOLCHAIN} == "no" 467MK_CLANG:= no 468MK_INCLUDES:= no 469MK_LLD:= no 470MK_LLDB:= no 471MK_LLVM_BINUTILS:= no 472.endif 473 474.if ${MK_CLANG} == "no" 475MK_CLANG_EXTRAS:= no 476MK_CLANG_FORMAT:= no 477MK_CLANG_FULL:= no 478MK_LLVM_COV:= no 479.endif 480 481.if ${MK_ASAN} == "yes" 482# In order to get sensible backtraces from ASAN we have to install 483# llvm-symbolizer as /usr/bin/addr2line instead of the elftoolchain version. 484MK_LLVM_BINUTILS:= yes 485.endif 486 487.if ${MK_LLVM_BINUTILS} == "yes" 488# MK_LLVM_CXXFILT is a subset of MK_LLVM_BINUTILS and should therefore be 489# enabled if MK_LLVM_BINUTILS is set. 490MK_LLVM_CXXFILT:= yes 491.endif 492 493.if ${MK_LOADER_VERIEXEC} == "no" 494MK_LOADER_VERIEXEC_PASS_MANIFEST := no 495.endif 496 497# 498# MK_* options whose default value depends on another option. 499# 500.for vv in \ 501 GSSAPI/KERBEROS \ 502 MAN_UTILS/MAN 503.if defined(WITH_${vv:H}) 504MK_${vv:H}:= yes 505.elif defined(WITHOUT_${vv:H}) 506MK_${vv:H}:= no 507.else 508MK_${vv:H}:= ${MK_${vv:T}} 509.endif 510.endfor 511 512# 513# Set defaults for the MK_*_SUPPORT variables. 514# 515 516.endif # !target(__<src.opts.mk>__) 517