1# $Id: dirdeps.mk,v 1.156 2023/04/18 18:39:09 sjg Exp $ 2 3# SPDX-License-Identifier: BSD-2-Clause 4# 5# Copyright (c) 2010-2023, Simon J. Gerraty 6# Copyright (c) 2010-2018, Juniper Networks, Inc. 7# All rights reserved. 8# 9# Redistribution and use in source and binary forms, with or without 10# modification, are permitted provided that the following conditions 11# are met: 12# 1. Redistributions of source code must retain the above copyright 13# notice, this list of conditions and the following disclaimer. 14# 2. Redistributions in binary form must reproduce the above copyright 15# notice, this list of conditions and the following disclaimer in the 16# documentation and/or other materials provided with the distribution. 17# 18# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 19# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 20# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 21# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 22# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 23# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 24# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 25# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 26# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 27# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 28# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 29 30# Much of the complexity here is for supporting cross-building. 31# If a tree does not support that, simply using plain Makefile.depend 32# should provide sufficient clue. 33# Otherwise the recommendation is to use Makefile.depend.${MACHINE} 34# as expected below. 35 36# Note: this file gets multiply included. 37# This is what we do with DIRDEPS 38 39# DIRDEPS: 40# This is a list of directories - relative to SRCTOP, it is 41# normally only of interest to .MAKE.LEVEL 0. 42# In some cases the entry may be qualified with a .<machine> 43# or .<target_spec> suffix (see TARGET_SPEC_VARS below), 44# for example to force building something for the pseudo 45# machines "host" or "common" regardless of current ${MACHINE}. 46# 47# All unqualified entries end up being qualified with .${TARGET_SPEC} 48# and partially qualified (if TARGET_SPEC_VARS has multiple 49# entries) are also expanded to a full .<target_spec>. 50# The _DIRDEP_USE target uses the suffix to set TARGET_SPEC 51# correctly when visiting each entry. 52# 53# The fully qualified directory entries are used to construct a 54# dependency graph that will drive the build later. 55# 56# Also, for each fully qualified directory target, we will search 57# using ${.MAKE.DEPENDFILE_PREFERENCE} to find additional 58# dependencies. We use Makefile.depend (default value for 59# .MAKE.DEPENDFILE_PREFIX) to refer to these makefiles to 60# distinguish them from others. 61# 62# Before each Makefile.depend file is read, we set 63# DEP_RELDIR to be the RELDIR (path relative to SRCTOP) for 64# its directory, and DEP_MACHINE etc according to the .<target_spec> 65# represented by the suffix of the corresponding target. 66# 67# Since each Makefile.depend file includes dirdeps.mk, this 68# processing is recursive and results in .MAKE.LEVEL 0 learning the 69# dependencies of the tree wrt the initial directory (_DEP_RELDIR). 70# 71# NOTE: given the extent of processing that DIRDEPS undergoes it 72# is important that any variables in entries use :U to guard 73# against surprises when undefined. 74# 75# TARGET_SPEC_VARS 76# The default value is just MACHINE, and for most environments 77# this is sufficient. The _DIRDEP_USE target actually sets 78# both MACHINE and TARGET_SPEC to the suffix of the current 79# target so that in the general case TARGET_SPEC can be ignored. 80# 81# If more than MACHINE is needed then sys.mk needs to decompose 82# TARGET_SPEC and set the relevant variables accordingly. 83# It is important that MACHINE be included in and actually be 84# the first member of TARGET_SPEC_VARS. This allows other 85# variables to be considered optional, and some of the treatment 86# below relies on MACHINE being the first entry. 87# Note: TARGET_SPEC cannot contain any '.'s so the target 88# triple used by compiler folk won't work (directly anyway). 89# 90# For example: 91# 92# # Always list MACHINE first, 93# # other variables might be optional. 94# TARGET_SPEC_VARS = MACHINE TARGET_OS 95# .if ${TARGET_SPEC:Uno:M*,*} != "" 96# _tspec := ${TARGET_SPEC:S/,/ /g} 97# MACHINE := ${_tspec:[1]} 98# TARGET_OS := ${_tspec:[2]} 99# # etc. 100# # We need to stop that TARGET_SPEC affecting any submakes 101# # and deal with MACHINE=${TARGET_SPEC} in the environment. 102# TARGET_SPEC = 103# # export but do not track 104# .export-env TARGET_SPEC 105# .export ${TARGET_SPEC_VARS} 106# .for v in ${TARGET_SPEC_VARS:O:u} 107# .if empty($v) 108# .undef $v 109# .endif 110# .endfor 111# .endif 112# # make sure we know what TARGET_SPEC is 113# # as we may need it to find Makefile.depend* 114# TARGET_SPEC = ${TARGET_SPEC_VARS:@v@${$v:U}@:ts,} 115# 116# The following variables can influence the initial DIRDEPS 117# computation with regard to the TARGET_SPECs that will be 118# built. 119# Most should also be considered by init.mk 120# 121# ONLY_TARGET_SPEC_LIST 122# Defines a list of TARGET_SPECs for which the current 123# directory can be built. 124# If ALL_MACHINES is defined, we build for all the 125# TARGET_SPECs listed. 126# 127# ONLY_MACHINE_LIST 128# As for ONLY_TARGET_SPEC_LIST but only specifies 129# MACHINEs. 130# 131# NOT_TARGET_SPEC_LIST 132# A list of TARGET_SPECs for which the current 133# directory should not be built. 134# 135# NOT_MACHINE_LIST 136# A list of MACHINEs the current directory should not be 137# built for. 138# 139# DIRDEPS_EXPORT_VARS (DEP_EXPORT_VARS) 140# It is discouraged, but sometimes necessary for a 141# Makefile.depend file to influence the environment. 142# Doing this is correctly (especially if using DIRDEPS_CACHE) is 143# tricky so a Makefile.depend file can set DIRDEPS_EXPORT_VARS 144# and dirdeps.mk will do the deed: 145# 146# MK_UEFI = yes 147# DIRDEPS_EXPORT_VARS = MK_UEFI 148# 149# _build_xtra_dirs 150# local.dirdeps.mk can add targets to this variable. 151# They will be hooked into the build, but independent of 152# any other DIRDEP. 153# 154# This allows for adding TESTS to the build, such that the build 155# if any test fails, but without the risk of introducing 156# circular dependencies. 157 158now_utc ?= ${%s:L:gmtime} 159.if !defined(start_utc) 160start_utc := ${now_utc} 161.endif 162 163.if !target(bootstrap) && (make(bootstrap) || \ 164 make(bootstrap-this) || \ 165 make(bootstrap-recurse) || \ 166 make(bootstrap-empty)) 167# disable most of below 168.MAKE.LEVEL = 1 169.endif 170 171# touch this at your peril 172_DIRDEP_USE_LEVEL?= 0 173.if ${.MAKE.LEVEL} == ${_DIRDEP_USE_LEVEL} 174# only the first instance is interested in all this 175 176# the first time we are included the _DIRDEP_USE target will not be defined 177# we can use this as a clue to do initialization and other one time things. 178.if !target(_DIRDEP_USE) 179 180# do some setup we only need once 181_CURDIR ?= ${.CURDIR} 182_OBJDIR ?= ${.OBJDIR} 183 184.if ${MAKEFILE:T} == ${.PARSEFILE} && empty(DIRDEPS) && ${.TARGETS:Uall:M*[/.]*} != "" 185# This little trick let's us do 186# 187# mk -f dirdeps.mk some/dir.${TARGET_SPEC} 188# 189all: 190${.TARGETS:Nall}: all 191DIRDEPS := ${.TARGETS:M*[/.]*} 192# so that -DNO_DIRDEPS works 193DEP_RELDIR := ${DIRDEPS:[1]:R} 194# this will become DEP_MACHINE below 195TARGET_MACHINE := ${DIRDEPS:[1]:E:C/,.*//} 196.if ${TARGET_MACHINE:N*/*} == "" 197TARGET_MACHINE := ${MACHINE} 198.endif 199# disable DIRDEPS_CACHE as it does not like this trick 200MK_DIRDEPS_CACHE = no 201# incase anyone needs to know 202_dirdeps_cmdline: 203.endif 204 205# make sure we get the behavior we expect 206.MAKE.SAVE_DOLLARS = no 207 208# make sure these are empty to start with 209_DEP_TARGET_SPEC = 210 211# If TARGET_SPEC_VARS is other than just MACHINE 212# it should be set by sys.mk or similar by now. 213# TARGET_SPEC must not contain any '.'s. 214TARGET_SPEC_VARS ?= MACHINE 215# this is what we started with 216TARGET_SPEC = ${TARGET_SPEC_VARS:@v@${$v:U}@:ts,} 217# this is what we mostly use below 218DEP_TARGET_SPEC = ${TARGET_SPEC_VARS:S,^,DEP_,:@v@${$v:U}@:ts,} 219# make sure we have defaults 220.for v in ${TARGET_SPEC_VARS} 221DEP_$v ?= ${$v} 222.endfor 223 224.if ${TARGET_SPEC_VARS:[#]} > 1 225# Ok, this gets more complex (putting it mildly). 226# In order to stay sane, we need to ensure that all the build_dirs 227# we compute below are fully qualified wrt DEP_TARGET_SPEC. 228# The makefiles may only partially specify (eg. MACHINE only), 229# so we need to construct a set of modifiers to fill in the gaps. 230.if ${MAKE_VERSION} >= 20170130 231_tspec_x := ${TARGET_SPEC_VARS:range} 232.else 233# do it the hard way 234_tspec_x := ${TARGET_SPEC_VARS:[#]:@x@i=1;while [ $$i -le $x ]; do echo $$i; i=$$((i + 1)); done;@:sh} 235.endif 236# this handles unqualified entries 237M_dep_qual_fixes = C;(/[^/.,]+)$$;\1.$${DEP_TARGET_SPEC}; 238# there needs to be at least one item missing for these to make sense 239.for i in ${_tspec_x:[2..-1]} 240_tspec_m$i := ${TARGET_SPEC_VARS:[2..$i]:@w@[^,]+@:ts,} 241_tspec_a$i := ,${TARGET_SPEC_VARS:[$i..-1]:@v@$$$${DEP_$v}@:ts,} 242M_dep_qual_fixes += C;(\.${_tspec_m$i})$$;\1${_tspec_a$i}; 243.endfor 244TARGET_SPEC_VARSr := ${TARGET_SPEC_VARS:[-1..1]} 245.else 246# A harmless? default. 247M_dep_qual_fixes = U 248.endif 249 250.if !defined(.MAKE.DEPENDFILE_PREFERENCE) 251# .MAKE.DEPENDFILE_PREFERENCE makes the logic below neater? 252# you really want this set by sys.mk or similar 253.MAKE.DEPENDFILE_PREFERENCE = ${_CURDIR}/${.MAKE.DEPENDFILE:T} 254.if ${.MAKE.DEPENDFILE:E} == "${TARGET_SPEC}" 255.if ${TARGET_SPEC} != ${MACHINE} 256.MAKE.DEPENDFILE_PREFERENCE += ${_CURDIR}/${.MAKE.DEPENDFILE:T:R}.$${MACHINE} 257.endif 258.MAKE.DEPENDFILE_PREFERENCE += ${_CURDIR}/${.MAKE.DEPENDFILE:T:R} 259.endif 260.endif 261 262_default_dependfile := ${.MAKE.DEPENDFILE_PREFERENCE:[1]:T} 263_machine_dependfiles := ${.MAKE.DEPENDFILE_PREFERENCE:T:M*${MACHINE}*} 264 265# for machine specific dependfiles we require ${MACHINE} to be at the end 266# also for the sake of sanity we require a common prefix 267.if !defined(.MAKE.DEPENDFILE_PREFIX) 268# knowing .MAKE.DEPENDFILE_PREFIX helps 269.if !empty(_machine_dependfiles) 270.MAKE.DEPENDFILE_PREFIX := ${_machine_dependfiles:[1]:T:R} 271.else 272.MAKE.DEPENDFILE_PREFIX := ${_default_dependfile:T} 273.endif 274.endif 275 276# this is how we identify non-machine specific dependfiles 277N_notmachine := ${.MAKE.DEPENDFILE_PREFERENCE:E:N*${MACHINE}*:${M_ListToSkip}} 278 279# this gets reset for each dirdep we check 280DEP_RELDIR ?= ${RELDIR} 281 282# remember the initial value of DEP_RELDIR - we test for it below. 283_DEP_RELDIR := ${DEP_RELDIR} 284 285# this can cause lots of output! 286# set to a set of glob expressions that might match RELDIR 287DEBUG_DIRDEPS ?= no 288 289# make sure this target exists 290dirdeps: beforedirdeps .WAIT 291beforedirdeps: 292 293.endif # !target(_DIRDEP_USE) 294 295.if ${DEBUG_DIRDEPS:@x@${DEP_RELDIR:M$x}${${DEP_RELDIR}.${DEP_MACHINE}:L:M$x}@} != "" 296_debug_reldir = 1 297.else 298_debug_reldir = 0 299.endif 300.if ${DEBUG_DIRDEPS:@x@${DEP_RELDIR:M$x}${${DEP_RELDIR}.depend depend:L:M$x}@} != "" 301_debug_search = 1 302.else 303_debug_search = 0 304.endif 305 306# First off, we want to know what ${MACHINE} to build for. 307# This can be complicated if we are using a mixture of ${MACHINE} specific 308# and non-specific Makefile.depend* 309 310# if we were included recursively _DEP_TARGET_SPEC should be valid. 311.if empty(_DEP_TARGET_SPEC) 312DEP_MACHINE = ${TARGET_MACHINE:U${MACHINE}} 313_DEP_TARGET_SPEC := ${DEP_TARGET_SPEC} 314.if ${.INCLUDEDFROMFILE:U:M${.MAKE.DEPENDFILE_PREFIX}*} != "" 315# record that we've read dependfile for this 316_dirdeps_checked.${_CURDIR}.${TARGET_SPEC}: 317.endif 318.endif 319 320# by now _DEP_TARGET_SPEC should be set, parse it. 321.if ${TARGET_SPEC_VARS:[#]} > 1 322# we need to parse DEP_MACHINE may or may not contain more info 323_tspec := ${_DEP_TARGET_SPEC:S/,/ /g} 324.for i in ${_tspec_x} 325DEP_${TARGET_SPEC_VARS:[$i]} := ${_tspec:[$i]} 326.endfor 327.for v in ${TARGET_SPEC_VARS:O:u} 328.if empty(DEP_$v) 329.undef DEP_$v 330.endif 331.endfor 332.else 333DEP_MACHINE := ${_DEP_TARGET_SPEC} 334.endif 335 336# reset each time through 337_build_all_dirs = 338_build_xtra_dirs = 339 340# DIRDEPS_CACHE can be very handy for debugging. 341# Also if repeatedly building the same target, 342# we can avoid the overhead of re-computing the tree dependencies. 343MK_DIRDEPS_CACHE ?= no 344BUILD_DIRDEPS_CACHE ?= no 345BUILD_DIRDEPS ?= yes 346 347.if ${MK_DIRDEPS_CACHE} == "yes" 348# this is where we will cache all our work 349DIRDEPS_CACHE ?= ${_OBJDIR:tA}/dirdeps.cache${_TARGETS:U${.TARGETS}:Nall:O:u:ts-:S,/,_,g:S,^,.,:N.} 350.endif 351 352# sanity check: Makefile.depend.options should *not* include us 353.if ${.INCLUDEDFROMFILE:U:M${.MAKE.DEPENDFILE_PREFIX}.options} != "" 354.error ${DEP_RELDIR}/${.MAKE.DEPENDFILE_PREFIX}.options: should include dirdeps-options.mk 355.endif 356 357# pickup customizations 358# as below you can use !target(_DIRDEP_USE) to protect things 359# which should only be done once. 360.-include <local.dirdeps.mk> 361 362.if !target(_DIRDEP_USE) 363# things we skip for host tools 364SKIP_HOSTDIR ?= 365 366NSkipHostDir = ${SKIP_HOSTDIR:N*.host*:S,$,.host*,:N.host*:S,^,${SRCTOP}/,:${M_ListToSkip}} 367 368# things we always skip 369# SKIP_DIRDEPS allows for adding entries on command line. 370SKIP_DIR += .host *.WAIT ${SKIP_DIRDEPS} 371SKIP_DIR.host += ${SKIP_HOSTDIR} 372 373DEP_SKIP_DIR = ${SKIP_DIR} \ 374 ${SKIP_DIR.${DEP_TARGET_SPEC}:U} \ 375 ${TARGET_SPEC_VARS:@v@${SKIP_DIR.${DEP_$v}:U}@} \ 376 ${SKIP_DIRDEPS.${DEP_TARGET_SPEC}:U} \ 377 ${TARGET_SPEC_VARS:@v@${SKIP_DIRDEPS.${DEP_$v}:U}@} 378 379 380NSkipDir = ${DEP_SKIP_DIR:${M_ListToSkip}} 381 382.if defined(NODIRDEPS) || defined(WITHOUT_DIRDEPS) 383NO_DIRDEPS = 384.elif defined(WITHOUT_DIRDEPS_BELOW) 385NO_DIRDEPS_BELOW = 386.endif 387 388.if defined(NO_DIRDEPS) 389# confine ourselves to the original dir and below. 390DIRDEPS_FILTER += M${_DEP_RELDIR}* 391.elif defined(NO_DIRDEPS_BELOW) 392DIRDEPS_FILTER += M${_DEP_RELDIR} 393.endif 394 395# this is what we run below 396DIRDEP_MAKE ?= ${.MAKE} 397DIRDEP_DIR ?= ${.TARGET:R} 398 399# if you want us to report load averages during build 400# DIRDEP_USE_PRELUDE += ${DIRDEP_LOADAVG_REPORT}; 401 402DIRDEP_LOADAVG_CMD ?= ${UPTIME:Uuptime} | sed 's,.*\(load\),\1,' 403DIRDEP_LOADAVG_LAST = 0 404# yes the expression here is a bit complicated, 405# the trick is to only eval ${DIRDEP_LOADAVG_LAST::=${now_utc}} 406# when we want to report. 407# Note: expr(1) will exit 1 if the expression evaluates to 0 408# hence the || true 409DIRDEP_LOADAVG_REPORT = \ 410 test -z "${"${expr ${now_utc} - ${DIRDEP_LOADAVG_INTERVAL:U60} - ${DIRDEP_LOADAVG_LAST} || true:L:sh:N-*}":?yes${DIRDEP_LOADAVG_LAST::=${now_utc}}:}" || \ 411 echo "${TRACER}`${DIRDEP_LOADAVG_CMD}`" 412 413# we suppress SUBDIR when visiting the leaves 414# we assume sys.mk will set MACHINE_ARCH 415# you can add extras to DIRDEP_USE_ENV 416# if there is no makefile in the target directory, we skip it. 417_DIRDEP_USE: .USE .MAKE 418 @for m in ${.MAKE.MAKEFILE_PREFERENCE}; do \ 419 test -s ${.TARGET:R}/$$m || continue; \ 420 echo "${TRACER}Checking ${.TARGET:S,^${SRCTOP}/,,} for ${.TARGET:E} ..."; \ 421 ${DIRDEP_USE_PRELUDE} \ 422 MACHINE_ARCH= NO_SUBDIR=1 ${DIRDEP_USE_ENV} \ 423 TARGET_SPEC=${.TARGET:E} \ 424 MACHINE=${.TARGET:E} \ 425 ${DIRDEP_MAKE} -C ${DIRDEP_DIR} || exit 1; \ 426 break; \ 427 done 428 429.ifdef ALL_MACHINES 430.if empty(ONLY_TARGET_SPEC_LIST) && empty(ONLY_MACHINE_LIST) 431# we start with everything 432_machine_list != echo; 'ls' -1 ${_CURDIR}/${.MAKE.DEPENDFILE_PREFIX}* 2> /dev/null 433 434# some things we know we want to ignore 435DIRDEPS_TARGETS_SKIP_LIST += \ 436 *~ \ 437 *.bak \ 438 *.inc \ 439 *.old \ 440 *.options \ 441 *.orig \ 442 *.rej \ 443 444# first trim things we know we want to skip 445# and provide canonical form 446_machine_list := ${_machine_list:${DIRDEPS_TARGETS_SKIP_LIST:${M_ListToSkip}}:T:E} 447 448# cater for local complexities 449# local.dirdeps.mk can set 450# DIRDEPS_ALL_MACHINES_FILTER and 451# DIRDEPS_ALL_MACHINES_FILTER_XTRAS for final tweaks 452 453.if !empty(ALL_TARGET_SPEC_LIST) 454.if ${_debug_reldir} 455.info ALL_TARGET_SPEC_LIST=${ALL_TARGET_SPEC_LIST} 456.endif 457DIRDEPS_ALL_MACHINES_FILTER += \ 458 @x@$${ALL_TARGET_SPEC_LIST:@s@$${x:M$$s}@}@ 459.elif !empty(ALL_MACHINE_LIST) 460.if ${_debug_reldir} 461.info ALL_MACHINE_LIST=${ALL_MACHINE_LIST} 462.endif 463.if ${TARGET_SPEC_VARS:[#]} > 1 464# the space below can result in extraneous ':' 465DIRDEPS_ALL_MACHINES_FILTER += \ 466 @x@$${ALL_MACHINE_LIST:@m@$${x:M$$m,*} $${x:M$$m}@}@ 467.else 468DIRDEPS_ALL_MACHINES_FILTER += \ 469 @x@$${ALL_MACHINE_LIST:@m@$${x:M$$m}@}@ 470.endif 471.endif 472# add local XTRAS - default to something benign 473DIRDEPS_ALL_MACHINES_FILTER += \ 474 ${DIRDEPS_ALL_MACHINES_FILTER_XTRAS:UNbak} 475 476.if ${_debug_reldir} 477.info _machine_list=${_machine_list} 478.info DIRDEPS_ALL_MACHINES_FILTER=${DIRDEPS_ALL_MACHINES_FILTER} 479.endif 480 481_only_machines := ${_machine_list:${DIRDEPS_ALL_MACHINES_FILTER:ts:}:S,:, ,g} 482.else 483_only_machines := ${ONLY_TARGET_SPEC_LIST:U} ${ONLY_MACHINE_LIST:U} 484.endif 485 486.if empty(_only_machines) 487# we must be boot-strapping 488_only_machines := ${TARGET_MACHINE:U${ALL_TARGET_SPEC_LIST:U${ALL_MACHINE_LIST:U${DEP_MACHINE}}}} 489.endif 490 491# cleanup the result 492_only_machines := ${_only_machines:O:u} 493 494.if ${_debug_reldir} 495.info ${DEP_RELDIR}.${DEP_TARGET_SPEC}: ALL_MACHINES _only_machines=${_only_machines} 496.endif 497 498.else # ! ALL_MACHINES 499# if ONLY_TARGET_SPEC_LIST or ONLY_MACHINE_LIST is set, we are limited to that. 500# Note that ONLY_TARGET_SPEC_LIST should be fully qualified. 501# if TARGET_MACHINE is set - it is really the same as ONLY_MACHINE_LIST 502# otherwise DEP_MACHINE is it - so DEP_MACHINE will match. 503_only_machines := ${ONLY_TARGET_SPEC_LIST:U:M${DEP_MACHINE},*} 504.if empty(_only_machines) 505_only_machines := ${ONLY_MACHINE_LIST:U${TARGET_MACHINE:U${DEP_MACHINE}}:M${DEP_MACHINE}} 506.endif 507.endif 508 509.if !empty(NOT_MACHINE_LIST) 510_only_machines := ${_only_machines:${NOT_MACHINE_LIST:${M_ListToSkip}}} 511.endif 512.if !empty(NOT_TARGET_SPEC_LIST) 513# we must first qualify 514_dm := ${DEP_MACHINE} 515_only_machines := ${_only_machines:M*,*} ${_only_machines:N*,*:@DEP_MACHINE@${DEP_TARGET_SPEC}@:S,^,.,:${M_dep_qual_fixes:ts:}:O:u:S,^.,,} 516DEP_MACHINE := ${_dm} 517_only_machines := ${_only_machines:${NOT_TARGET_SPEC_LIST:${M_ListToSkip}}} 518.endif 519# clean up 520_only_machines := ${_only_machines:O:u} 521 522.if ${_debug_reldir} 523.info ${DEP_RELDIR}.${DEP_TARGET_SPEC}: _only_machines=${_only_machines} 524.endif 525 526# make sure we have a starting place? 527DIRDEPS ?= ${RELDIR} 528.endif # target 529 530.if !defined(NO_DIRDEPS) && !defined(NO_DIRDEPS_BELOW) 531.if ${MK_DIRDEPS_CACHE} == "yes" 532 533# just ensure this exists 534build-dirdeps: 535 536M_oneperline = @x@\\${.newline} $$x@ 537 538.if ${BUILD_DIRDEPS_CACHE} == "no" 539.if !target(dirdeps-cached) 540# we do this via sub-make 541BUILD_DIRDEPS = no 542 543# ignore anything but these 544.MAKE.META.IGNORE_FILTER = M*/${.MAKE.DEPENDFILE_PREFIX}* 545 546dirdeps: dirdeps-cached 547dirdeps-cached: ${DIRDEPS_CACHE} .MAKE 548 @echo "${TRACER}Using ${DIRDEPS_CACHE}" 549 @MAKELEVEL=${.MAKE.LEVEL} \ 550 TARGET_SPEC=${TARGET_SPEC} \ 551 ${TARGET_SPEC_VARS:@v@$v=${$v}@} \ 552 ${.MAKE} -C ${_CURDIR} -f ${DIRDEPS_CACHE} \ 553 dirdeps MK_DIRDEPS_CACHE=no BUILD_DIRDEPS=no 554 555# leaf makefiles rarely work for building DIRDEPS_CACHE 556.if ${RELDIR} != "." 557BUILD_DIRDEPS_MAKEFILE ?= -f dirdeps.mk 558.endif 559 560# these should generally do 561BUILD_DIRDEPS_MAKEFILE ?= 562BUILD_DIRDEPS_TARGETS ?= ${.TARGETS} 563 564.if ${DIRDEPS_CACHE} != ${STATIC_DIRDEPS_CACHE:Uno} && ${DIRDEPS_CACHE:M${SRCTOP}/*} == "" 565# export this for dirdeps-cache-update.mk 566DYNAMIC_DIRDEPS_CACHE := ${DIRDEPS_CACHE} 567.export DYNAMIC_DIRDEPS_CACHE 568# we need the .meta file to ensure we update if 569# any of the Makefile.depend* changed. 570# We do not want to compare the command line though. 571${DIRDEPS_CACHE}: .META .NOMETA_CMP 572 +@{ echo '# Autogenerated - do NOT edit!'; echo; \ 573 echo 'BUILD_DIRDEPS=no'; echo; \ 574 echo '.include <dirdeps.mk>'; echo; \ 575 } > ${.TARGET}.new 576 +@MAKELEVEL=${.MAKE.LEVEL} DIRDEPS_CACHE=${DIRDEPS_CACHE} \ 577 DIRDEPS="${DIRDEPS}" \ 578 TARGET_SPEC=${TARGET_SPEC} \ 579 MAKEFLAGS= ${DIRDEP_CACHE_MAKE:U${.MAKE}} -C ${_CURDIR} \ 580 ${BUILD_DIRDEPS_MAKEFILE} \ 581 ${BUILD_DIRDEPS_TARGETS} BUILD_DIRDEPS_CACHE=yes \ 582 .MAKE.DEPENDFILE=.none \ 583 ${"${DEBUG_DIRDEPS:Nno}":?DEBUG_DIRDEPS='${DEBUG_DIRDEPS}':} \ 584 ${.MAKEFLAGS:tW:S,-D ,-D,g:tw:M*WITH*} \ 585 ${.MAKEFLAGS:tW:S,-d ,-d,g:tw:M-d*} \ 586 3>&1 1>&2 | sed 's,${SRCTOP},_{SRCTOP},g;s,_{SRCTOP}/_{SRCTOP},_{SRCTOP},g;s,_{,$${,g' >> ${.TARGET}.new && \ 587 mv ${.TARGET}.new ${.TARGET} 588 589.endif 590.endif 591.elif !target(_count_dirdeps) 592# we want to capture the dirdeps count in the cache 593.END: _count_dirdeps 594_count_dirdeps: .NOMETA 595 @{ echo; echo '.info $${.newline}$${TRACER}Makefiles read: total=${.MAKE.MAKEFILES:[#]} depend=${.MAKE.MAKEFILES:M*depend*:[#]} dirdeps=${.ALLTARGETS:M${SRCTOP}*:O:u:[#]} ${DIRDEP_INFO_XTRAS}'; } >&3 596 597.endif 598.elif !make(dirdeps) && !target(_count_dirdeps) 599beforedirdeps: _count_dirdeps 600_count_dirdeps: .NOMETA 601 @echo "${TRACER}Makefiles read: total=${.MAKE.MAKEFILES:[#]} depend=${.MAKE.MAKEFILES:M*depend*:[#]} dirdeps=${.ALLTARGETS:M${SRCTOP}*:O:u:[#]} ${DIRDEP_INFO_XTRAS} seconds=`expr ${now_utc} - ${start_utc}`" 602 603.endif 604.endif 605 606.if ${BUILD_DIRDEPS} == "yes" 607 608# the rest is done repeatedly for every Makefile.depend we read. 609# if we are anything but the original dir we care only about the 610# machine type we were included for.. 611 612.if ${DEP_RELDIR} == "." 613_this_dir := ${SRCTOP} 614.else 615_this_dir := ${SRCTOP}/${DEP_RELDIR} 616.endif 617 618# on rare occasions, there can be a need for extra help 619_dep_hack := ${_this_dir}/${.MAKE.DEPENDFILE_PREFIX}.inc 620.-include <${_dep_hack}> 621.-include <${_dep_hack:R}.options> 622 623.if ${DEP_RELDIR} != ${_DEP_RELDIR} || ${DEP_TARGET_SPEC} != ${TARGET_SPEC} 624# this should be all 625_machines := ${DEP_MACHINE} 626.else 627# this is the machine list we actually use below 628_machines := ${_only_machines} 629 630.if defined(HOSTPROG) || ${DEP_MACHINE:Nhost*} == "" 631# we need to build this guy's dependencies for host as well. 632.if ${DEP_MACHINE:Nhost*} == "" 633_machines += ${DEP_MACHINE} 634.else 635_machines += host 636.endif 637.endif 638 639_machines := ${_machines:O:u} 640.endif 641 642.if ${TARGET_SPEC_VARS:[#]} > 1 643# we need to tweak _machines 644_dm := ${DEP_MACHINE} 645# apply the same filtering that we do when qualifying DIRDEPS. 646# M_dep_qual_fixes expects .${MACHINE}* so add (and remove) '.' 647# Again we expect that any already qualified machines are fully qualified. 648_machines := ${_machines:M*,*} ${_machines:N*,*:@DEP_MACHINE@${DEP_TARGET_SPEC}@:S,^,.,:${M_dep_qual_fixes:ts:}:O:u:S,^.,,} 649DEP_MACHINE := ${_dm} 650_machines := ${_machines:O:u} 651.endif 652 653# reset each time through 654_build_dirs = 655 656.if ${DEP_RELDIR} == ${_DEP_RELDIR} 657# pickup other machines for this dir if necessary 658_build_dirs += ${_machines:@m@${_CURDIR}.$m@} 659.endif 660 661.if ${_debug_reldir} 662.info ${DEP_RELDIR}.${DEP_TARGET_SPEC}: nDIRDEPS=${DIRDEPS:[#]} 663.info ${DEP_RELDIR}.${DEP_TARGET_SPEC}: DIRDEPS='${DIRDEPS}' 664.info ${DEP_RELDIR}.${DEP_TARGET_SPEC}: _machines='${_machines}' 665.endif 666 667.if !empty(DIRDEPS) 668# these we reset each time through as they can depend on DEP_MACHINE 669DEP_DIRDEPS_FILTER = \ 670 ${DIRDEPS_FILTER.${DEP_TARGET_SPEC}:U} \ 671 ${TARGET_SPEC_VARS:@v@${DIRDEPS_FILTER.${DEP_$v}:U}@} \ 672 ${DIRDEPS_FILTER:U} 673.if empty(DEP_DIRDEPS_FILTER) 674# something harmless 675DEP_DIRDEPS_FILTER = U 676.endif 677 678# this is what we start with 679__depdirs := ${DIRDEPS:${NSkipDir}:${DEP_DIRDEPS_FILTER:ts:}:C,//+,/,g:O:u:@d@${SRCTOP}/$d@} 680 681# some entries may be qualified with .<machine> or .<target_spec> 682# we can tell the unqualified ones easily - because they exist 683__unqual_depdirs := ${__depdirs:@d@${exists($d):?$d:}@} 684__qual_depdirs := ${__depdirs:${__unqual_depdirs:Uno:${M_ListToSkip}}} 685 686.if ${DEP_RELDIR} == ${_DEP_RELDIR} 687# if it was called out - we likely need it. 688__hostdpadd := ${DPADD:U.:M${HOST_OBJTOP}/*:S,${HOST_OBJTOP}/,,:H:${NSkipDir}:${DIRDEPS_FILTER:ts:}:S,$,.host,:N.*:@d@${SRCTOP}/$d@} \ 689 ${DPADD:U.:M${HOST_OBJTOP32:Uno}/*:S,${HOST_OBJTOP32:Uno}/,,:H:${NSkipDir}:${DIRDEPS_FILTER:ts:}:S,$,.host32,:N.*:@d@${SRCTOP}/$d@} 690__qual_depdirs += ${__hostdpadd} 691.endif 692 693.if ${_debug_reldir} 694.info DEP_DIRDEPS_FILTER=${DEP_DIRDEPS_FILTER:ts:} 695.info depdirs=${__depdirs:S,^${SRCTOP}/,,} 696.info qualified=${__qual_depdirs:S,^${SRCTOP}/,,} 697.info unqualified=${__unqual_depdirs:S,^${SRCTOP}/,,} 698.endif 699 700# _build_dirs is what we will feed to _DIRDEP_USE 701_build_dirs += \ 702 ${__qual_depdirs:M*.host:${NSkipHostDir}:N.host} \ 703 ${__qual_depdirs:N*.host} \ 704 ${_machines:Mhost*:@m@${__unqual_depdirs:@d@$d.$m@}@:${NSkipHostDir}:N.host} \ 705 ${_machines:Nhost*:@m@${__unqual_depdirs:@d@$d.$m@}@} 706 707# qualify everything now 708_build_dirs := ${_build_dirs:${M_dep_qual_fixes:ts:}:O:u} 709 710.endif # empty DIRDEPS 711 712_build_all_dirs += ${_build_dirs} ${_build_xtra_dirs} 713_build_all_dirs := ${_build_all_dirs:O:u} 714 715# Normally if doing make -V something, 716# we do not want to waste time chasing DIRDEPS 717# but if we want to count the number of Makefile.depend* read, we do. 718.if ${.MAKEFLAGS:M-V${_V_READ_DIRDEPS:U}} == "" 719.if !empty(_build_all_dirs) 720.if ${BUILD_DIRDEPS_CACHE} == "yes" 721# we use _cache_script to minimize the number of times we fork the shell 722_cache_script = echo '\# ${DEP_RELDIR}.${DEP_TARGET_SPEC}'; 723# guard against _new_dirdeps being too big for a single command line 724_new_dirdeps := ${_build_all_dirs:@x@${target($x):?:$x}@:S,^${SRCTOP}/,,} 725_cache_xtra_deps := ${_build_xtra_dirs:S,^${SRCTOP}/,,} 726.export _cache_xtra_deps _new_dirdeps 727.if !empty(DIRDEPS_EXPORT_VARS) || !empty(DEP_EXPORT_VARS) 728# Discouraged, but there are always exceptions. 729# Handle it here rather than explain how. 730DIRDEPS_EXPORT_VARS ?= ${DEP_EXPORT_VARS} 731_cache_xvars := echo; ${DIRDEPS_EXPORT_VARS:@v@echo '$v = ${$v}';@} echo '.export ${DIRDEPS_EXPORT_VARS}'; echo; 732_cache_script += ${_cache_xvars} 733.endif 734.else 735# this makes it all happen 736dirdeps: ${_build_all_dirs} 737.endif 738${_build_all_dirs}: _DIRDEP_USE 739 740.if ${_debug_reldir} 741.info ${DEP_RELDIR}.${DEP_TARGET_SPEC}: needs: ${_build_dirs:S,^${SRCTOP}/,,} 742.endif 743 744.if !empty(DIRDEPS_EXPORT_VARS) || !empty(DEP_EXPORT_VARS) 745.export ${DIRDEPS_EXPORT_VARS} ${DEP_EXPORT_VARS} 746DIRDEPS_EXPORT_VARS = 747DEP_EXPORT_VARS = 748.endif 749 750# this builds the dependency graph 751.for m in ${_machines} 752.if ${BUILD_DIRDEPS_CACHE} == "yes" && !empty(_build_dirs) 753_cache_deps = 754_cache_script += echo; echo 'DIRDEPS.${_this_dir}.$m = \'; 755.endif 756# it would be nice to do :N${.TARGET} 757.if !empty(__qual_depdirs) 758.for q in ${__qual_depdirs:${M_dep_qual_fixes:ts:}:E:O:u:N$m} 759.if ${_debug_reldir} || ${DEBUG_DIRDEPS:@x@${${DEP_RELDIR}.$m:L:M$x}${${DEP_RELDIR}.$q:L:M$x}@} != "" 760.info ${DEP_RELDIR}.$m: graph: ${_build_dirs:M*.$q:S,^${SRCTOP}/,,} 761.endif 762.if ${BUILD_DIRDEPS_CACHE} == "yes" 763_cache_deps += ${_build_dirs:M*.$q:S,^${SRCTOP}/,,} 764.else 765${_this_dir}.$m: ${_build_dirs:M*.$q} 766.endif 767.endfor 768.endif 769.if ${_debug_reldir} 770.info ${DEP_RELDIR}.$m: graph: ${_build_dirs:M*.$m:N${_this_dir}.$m:S,^${SRCTOP}/,,} 771.endif 772.if ${BUILD_DIRDEPS_CACHE} == "yes" 773.if !empty(_build_dirs) 774_cache_deps += ${_build_dirs:M*.$m:N${_this_dir}.$m:S,^${SRCTOP}/,,} 775.if !empty(_cache_deps) 776.export _cache_deps 777_cache_script += for x in $$_cache_deps; do echo " _{SRCTOP}/$$x \\"; done; 778.endif 779# anything in _{build,env}_xtra_dirs is hooked to dirdeps: only 780x!= echo; { echo; ${_cache_script} echo; echo '${_this_dir}.$m: $${DIRDEPS.${_this_dir}.$m}'; \ 781 echo; echo 'dirdeps: ${_this_dir}.$m \'; \ 782 for x in $$_cache_xtra_deps; do echo " _{SRCTOP}/$$x \\"; done; \ 783 echo; for x in $$_new_dirdeps; do echo "_{SRCTOP}/$$x: _DIRDEP_USE"; done; } >&3 784.endif 785.else 786${_this_dir}.$m: ${_build_dirs:M*.$m:N${_this_dir}.$m} 787.endif 788.endfor 789 790.endif 791 792# Now find more dependencies - and recurse. 793.for d in ${_build_all_dirs} 794.if !target(_dirdeps_checked.$d) 795# once only 796_dirdeps_checked.$d: 797_dr := ${d:S,^${SRCTOP}/,,} 798.if ${_debug_search} 799.info checking ${_dr} 800.endif 801# Note: _build_all_dirs is fully qualifed so d:R is always the directory 802.if exists(${d:R}) 803# we pass _DEP_TARGET_SPEC to tell the next step what we want 804_DEP_TARGET_SPEC := ${d:E} 805# some makefiles may still look at this 806_DEP_MACHINE := ${d:E:C/,.*//} 807# set these too in case Makefile.depend* uses them 808.if ${TARGET_SPEC_VARS:[#]} > 1 809_dtspec := ${_DEP_TARGET_SPEC:S/,/ /g} 810.for i in ${_tspec_x} 811DEP_${TARGET_SPEC_VARS:[$i]} := ${_dtspec:[$i]} 812.endfor 813.else 814DEP_MACHINE := ${_DEP_MACHINE} 815.endif 816# Warning: there is an assumption here that MACHINE is always 817# the first entry in TARGET_SPEC_VARS. 818# If TARGET_SPEC and MACHINE are insufficient, you have a problem. 819_m := ${.MAKE.DEPENDFILE_PREFERENCE:T:S;${TARGET_SPEC}$;${d:E};:C;${MACHINE}((,.+)?)$;${d:E:C/,.*//}\1;:@m@${exists(${d:R}/$m):?${d:R}/$m:}@:[1]} 820.if !empty(_m) 821# M_dep_qual_fixes isn't geared to Makefile.depend 822_qm := ${_m:C;(\.depend)$;\1.${d:E};:${M_dep_qual_fixes:ts:}} 823.if ${_debug_search} 824.info Looking for ${_qm} 825.endif 826# set this "just in case" 827# we can skip :tA since we computed the path above 828DEP_RELDIR := ${_m:H:S,^${SRCTOP}/,,} 829# and reset this 830DIRDEPS = 831.if ${_debug_reldir} && ${_qm} != ${_m} 832.info loading ${_m:S,${SRCTOP}/,,} for ${_dr} 833.endif 834.include <${_m}> 835.else 836# set these as if we found Makefile.depend* 837DEP_RELDIR := ${_dr:R} 838DIRDEPS = 839.if ${_debug_reldir} 840.info loading local.dirdeps-missing.mk for ${_dr} 841.endif 842.-include <local.dirdeps-missing.mk> 843.endif 844.endif 845.endif 846.endfor 847 848.endif # -V 849.endif # BUILD_DIRDEPS 850 851.elif ${.MAKE.LEVEL} > 42 852.error You should have stopped recursing by now. 853.else 854# we are building something 855DEP_RELDIR := ${RELDIR} 856_DEP_RELDIR := ${RELDIR} 857# Since we are/should be included by .MAKE.DEPENDFILE 858# This is a final opportunity to add/hook global rules. 859.-include <local.dirdeps-build.mk> 860 861# skip _reldir_{finish,failed} if not included from Makefile.depend* 862# or not in meta mode 863.if !defined(WITHOUT_META_STATS) && ${.INCLUDEDFROMFILE:U:M${.MAKE.DEPENDFILE_PREFIX}*} != "" && ${.MAKE.MODE:Mmeta} != "" 864 865meta_stats= meta=${empty(.MAKE.META.FILES):?0:${.MAKE.META.FILES:[#]}} \ 866 created=${empty(.MAKE.META.CREATED):?0:${.MAKE.META.CREATED:[#]}} 867 868.if !target(_reldir_finish) 869.END: _reldir_finish 870_reldir_finish: .NOMETA 871 @echo "${TRACER}Finished ${RELDIR}.${TARGET_SPEC} seconds=$$(( ${now_utc} - ${start_utc} )) ${meta_stats}" 872.endif 873 874.if !target(_reldir_failed) 875.ERROR: _reldir_failed 876_reldir_failed: .NOMETA 877 @echo "${TRACER}Failed ${RELDIR}.${TARGET_SPEC} seconds=$$(( ${now_utc} - ${start_utc} )) ${meta_stats}" 878.endif 879 880.endif 881 882# pickup local dependencies 883.if ${MAKE_VERSION} < 20160220 884.-include <.depend> 885.else 886.dinclude <.depend> 887.endif 888.endif 889 890# bootstrapping new dependencies made easy? 891.if !target(bootstrap-empty) 892.if !target(bootstrap) && (make(bootstrap) || \ 893 make(bootstrap-this) || \ 894 make(bootstrap-recurse) || \ 895 make(bootstrap-empty)) 896 897# if we are bootstrapping create the default 898_want = ${.CURDIR}/${.MAKE.DEPENDFILE_DEFAULT:T} 899 900.if exists(${_want}) 901# stop here 902${.TARGETS:Mboot*}: 903.elif !make(bootstrap-empty) 904# find a Makefile.depend to use as _src 905_src != cd ${.CURDIR} && for m in ${.MAKE.DEPENDFILE_PREFERENCE:T:S,${MACHINE},*,}; do test -s $$m || continue; echo $$m; break; done; echo 906.if empty(_src) 907.error cannot find any of ${.MAKE.DEPENDFILE_PREFERENCE:T}${.newline}Use: bootstrap-empty 908.endif 909 910_src?= ${.MAKE.DEPENDFILE} 911 912.MAKE.DEPENDFILE_BOOTSTRAP_SED+= -e 's/${_src:E:C/,.*//}/${MACHINE}/g' 913 914# just create Makefile.depend* for this dir 915bootstrap-this: .NOTMAIN 916 @echo Bootstrapping ${RELDIR}/${_want:T} from ${_src:T}; \ 917 echo You need to build ${RELDIR} to correctly populate it. 918.if ${_src:T} != ${.MAKE.DEPENDFILE_PREFIX:T} 919 (cd ${.CURDIR} && sed ${.MAKE.DEPENDFILE_BOOTSTRAP_SED} ${_src} > ${_want:T}) 920.else 921 cp ${.CURDIR}/${_src:T} ${_want} 922.endif 923 924# create Makefile.depend* for this dir and its dependencies 925bootstrap: bootstrap-recurse 926bootstrap-recurse: bootstrap-this 927 928_mf := ${.PARSEFILE} 929bootstrap-recurse: .NOTMAIN .MAKE 930 @cd ${SRCTOP} && \ 931 for d in `cd ${RELDIR} && ${.MAKE} -B -f ${"${.MAKEFLAGS:M-n}":?${_src}:${.MAKE.DEPENDFILE:T}} -V DIRDEPS`; do \ 932 test -d $$d || d=$${d%.*}; \ 933 test -d $$d || continue; \ 934 echo "Checking $$d for bootstrap ..."; \ 935 (cd $$d && ${.MAKE} -f ${_mf} bootstrap-recurse); \ 936 done 937 938.endif 939 940# create an empty Makefile.depend* to get the ball rolling. 941bootstrap-empty: .NOTMAIN .NOMETA 942 @echo Creating empty ${RELDIR}/${_want:T}; \ 943 echo You need to build ${RELDIR} to correctly populate it. 944 @{ echo DIRDEPS=; echo ".include <dirdeps.mk>"; } > ${_want} 945 946.endif 947.endif 948