xref: /freebsd/share/mk/bsd.README (revision ef5d438ed4bc17ad7ece3e40fe4d1f9baf3aadf7)
1#	@(#)bsd.README	8.2 (Berkeley) 4/2/94
2
3XXX This document is seriously out of date, it is currenly being revised.
4
5				Rod Grimes <rgrimes@freebsd.org>
6
7This is the README file for the new make "include" files for the BSD
8source tree.  The files are installed in /usr/share/mk, and are, by
9convention, named with the suffix ".mk".  Each ".mk" file has a
10corresponding ".rd" file which is an explanation of the ".mk" file.
11
12Note, this file is not intended to replace reading through the .mk
13files for anything tricky.
14
15=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
16
17RANDOM THINGS WORTH KNOWING:
18
19The files are simply C-style #include files, and pretty much behave like
20you'd expect.  The syntax is slightly different in that a single '.' is
21used instead of the hash mark, i.e. ".include <bsd.prog.mk>".
22
23One difference that will save you lots of debugging time is that inclusion
24of the file is normally done at the *end* of the Makefile.  The reason for
25this is because .mk files often modify variables and behavior based on the
26values of variables set in the Makefile.  To make this work, remember that
27the FIRST target found is the target that is used, i.e. if the Makefile has:
28
29	a:
30		echo a
31	a:
32		echo a number two
33
34the command "make a" will echo "a".  To make things confusing, the SECOND
35variable assignment is the overriding one, i.e. if the Makefile has:
36
37	a=	foo
38	a=	bar
39
40	b:
41		echo ${a}
42
43the command "make b" will echo "bar".  This is for compatibility with the
44way the V7 make behaved.
45
46It's fairly difficult to make the BSD .mk files work when you're building
47multiple programs in a single directory.  It's a lot easier split up the
48programs than to deal with the problem.  Most of the agony comes from making
49the "obj" directory stuff work right, not because we switch to a new version
50of make.  So, don't get mad at us, figure out a better way to handle multiple
51architectures so we can quit using the symbolic link stuff.  (Imake doesn't
52count.)
53
54The file .depend in the source directory is expected to contain dependencies
55for the source files.  This file is read automatically by make after reading
56the Makefile.
57
58The variable DESTDIR works as before.  It's not set anywhere but will change
59the tree where the file gets installed.
60
61The profiled libraries are no longer built in a different directory than
62the regular libraries.  A new suffix, ".po", is used to denote a profiled
63object.
64
65=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
66
67The include file <sys.mk> has the default rules for all makes, in the BSD
68environment or otherwise.  You probably don't want to touch this file.
69
70=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
71
72The include file <bsd.man.mk> handles installing manual pages and their
73links.
74
75It has a single target:
76
77	maninstall:
78		Install the manual pages and their links.
79
80It sets/uses the following variables:
81
82MANDIR		Base path for manual installation.
83
84MANGRP		Manual group.
85
86MANOWN		Manual owner.
87
88MANMODE		Manual mode.
89
90MANSUBDIR	Subdirectory under the manual page section, i.e. "/vax"
91		or "/tahoe" for machine specific manual pages.
92
93MAN1 ... MAN8	The manual pages to be installed (use a .0 suffix).
94
95MLINKS		List of manual page links (using a .1 - .8 suffix).  The
96		linked-to file must come first, the linked file second,
97		and there may be multiple pairs.  The files are soft-linked.
98
99The include file <bsd.man.mk> includes the include file <bsd.inc.mk>.
100
101=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
102
103The include file <bsd.own.mk> contains the owners, groups, etc. for both
104manual pages and binaries.
105
106It has no targets.
107
108It sets/uses the following variables:
109
110BINGRP		Binary group.
111
112BINOWN		Binary owner.
113
114BINMODE		Binary mode.
115
116STRIP		The flag passed to the install program to cause the binary
117		to be stripped.  This is to be used when building your
118		own install script so that the entire system can be made
119		stripped/not-stripped using a single nob.
120
121MANDIR		Base path for manual installation.
122
123MANGRP		Manual group.
124
125MANOWN		Manual owner.
126
127MANMODE		Manual mode.
128
129This file is generally useful when building your own Makefiles so that
130they use the same default owners etc. as the rest of the tree.
131
132=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
133
134The include file <bsd.prog.mk> handles building programs from one or
135more source files, along with their manual pages.  It has a limited number
136of suffixes, consistent with the current needs of the BSD tree.
137
138It has seven targets:
139
140	all:
141		build the program and its manual page
142	clean:
143		remove the program, any object files and the files a.out,
144		Errs, errs, mklog, and ${PROG}.core.
145	cleandir:
146		remove all of the files removed by the target clean, as
147		well as .depend, tags, and any manual pages.
148	depend:
149		make the dependencies for the source files, and store
150		them in the file .depend.
151	install:
152		install the program and its manual pages; if the Makefile
153		does not itself define the target install, the targets
154		beforeinstall and afterinstall may also be used to cause
155		actions immediately before and after the install target
156		is executed.
157	lint:
158		run lint on the source files
159	tags:
160		create a tags file for the source files.
161
162It sets/uses the following variables:
163
164BINGRP		Binary group.
165
166BINOWN		Binary owner.
167
168BINMODE		Binary mode.
169
170CLEANFILES	Additional files to remove for the clean and cleandir targets.
171
172COPTS		Additional flags to the compiler when creating C objects.
173
174HIDEGAME	If HIDEGAME is defined, the binary is installed in
175		/usr/games/hide, and a symbolic link is created to
176		/usr/games/dm.
177
178LDADD		Additional loader objects.  Usually used for libraries.
179		For example, to load with the compatibility and utility
180		libraries, use:
181
182			LDFILES=-lutil -lcompat
183
184LDFLAGS		Additional loader flags.
185
186LINKS		The list of binary links; should be full pathnames, the
187		linked-to file coming first, followed by the linked
188		file.  The files are hard-linked.  For example, to link
189		/bin/test and /bin/[, use:
190
191			LINKS=	${DESTDIR}/bin/test ${DESTDIR}/bin/[
192
193MAN1...MAN8	Manual pages (should end in .0).  If no MAN variable is
194		defined, "MAN1=${PROG}.0" is assumed.
195
196PROG		The name of the program to build.  If not supplied, nothing
197		is built.
198
199SRCS		List of source files to build the program.  If PROG is not
200		defined, it's assumed to be ${PROG}.c.
201
202DPADD		Additional dependencies for the program.  Usually used for
203		libraries.  For example, to depend on the compatibility and
204		utility libraries use:
205
206			SRCLIB=${LIBCOMPAT} ${LIBUTIL}
207
208		The following libraries are predefined for DPADD:
209
210			LIBCRT0		/usr/lib/crt0.o (sic)
211			LIBC		/usr/lib/libc.a
212			LIBCOMPAT	/usr/lib/libcompat.a
213			LIBCRYPT	/usr/lib/libcrypt.a
214			LIBCURSES	/usr/lib/libcurses.a
215			LIBDES		/usr/lib/libdes.a
216			LIBDIALOG	/usr/lib/libdialog.a
217			LIBEDIT		/usr/lib/libedit.a
218			LIBGCC		/usr/lib/libgcc.a
219			LIBGNUMALLOC	/usr/lib/libgnumalloc.a
220			LIBGNUREGEX	/usr/lib/libgnuregex.a
221			LIBKDB		/usr/lib/libkdb.a
222			LIBKRB		/usr/lib/libkrb.a
223			LIBKVM		/usr/lib/libkvm.a
224			LIBL		/usr/lib/libl.a
225			LIBM		/usr/lib/libm.a
226			LIBMD		/usr/lib/libmd.a
227			LIBMP		/usr/lib/libmp.a
228			LIBMYTINFO	/usr/lib/libmytinfo.a
229			LIBNCURSES	/usr/lib/libncurses.a
230			LIBPC		/usr/lib/libpc.a
231			LIBPLOT		/usr/lib/libplot.a
232			LIBREADLINE	/usr/lib/libreadline.a
233			LIBRESOLV	/usr/lib/libresolv.a
234			LIBRPCSVC	/usr/lib/librpcsvc.a
235			LIBSCRYPT	/usr/lib/libscrypt.a
236			LIBSKEY		/usr/lib/libskey.a
237			LIBTELNET	/usr/lib/libtelnet.a
238			LIBTERMCAP	/usr/lib/libtermcap.a
239			LIBUTIL		/usr/lib/libutil.a
240			LIBY		/usr/lib/liby.a
241
242STRIP		The flag passed to the install program to cause the binary
243		to be stripped.
244
245SUBDIR		A list of subdirectories that should be built as well.
246		Each of the targets will execute the same target in the
247		subdirectories.
248
249The include file <bsd.prog.mk> includes the include files <bsd.inc.mk>
250and <bsd.man.mk>.
251
252Some simple examples:
253
254To build foo from foo.c with a manual page foo.1, use:
255
256	PROG=	foo
257
258	.include <bsd.prog.mk>
259
260To build foo from foo.c with a manual page foo.2, add the line:
261
262	MAN2=	foo.0
263
264If foo does not have a manual page at all, add the line:
265
266	NOMAN=	noman
267
268If foo has multiple source files, add the line:
269
270	SRCS=	a.c b.c c.c d.c
271
272=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
273
274The include file <bsd.subdir.mk> contains the default targets for building
275subdirectories.  It has the same seven targets as <bsd.prog.mk>: all, clean,
276cleandir, depend, install, lint, and tags.  For all of the directories
277listed in the variable SUBDIRS, the specified directory will be visited
278and the target made.  There is also a default target which allows the
279command "make subdir" where subdir is any directory listed in the variable
280SUBDIRS.
281
282=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
283
284The include file <bsd.lib.mk> has support for building libraries.  It has
285the same seven targets as <bsd.prog.mk>: all, clean, cleandir, depend,
286install, lint, and tags.  It has a limited number of suffixes, consistent
287with the current needs of the BSD tree.
288
289It sets/uses the following variables:
290
291LIBDIR		Target directory for libraries.
292
293LINTLIBDIR	Target directory for lint libraries.
294
295LIBGRP		Library group.
296
297LIBOWN		Library owner.
298
299LIBMODE		Library mode.
300
301LDADD		Additional loader objects.
302
303MAN1 ... MAN8	The manual pages to be installed (use a .0 suffix).
304
305SRCS		List of source files to build the library.  Suffix types
306		.s, .c, and .f are supported.  Note, .s files are preferred
307		to .c files of the same name.  (This is not the default for
308		versions of make.)
309
310The include file <bsd.lib.mk> includes the include files <bsd.inc.mk>
311and <bsd.man.mk>.
312
313It has rules for building profiled objects; profiled libraries are
314built by default.
315
316Libraries are ranlib'd before installation.
317