xref: /freebsd/share/man/man9/eventtimers.9 (revision 2e3507c25e42292b45a5482e116d278f5515d04d)
1.\"
2.\" Copyright (c) 2011-2013 Alexander Motin <mav@FreeBSD.org>
3.\" All rights reserved.
4.\"
5.\" Redistribution and use in source and binary forms, with or without
6.\" modification, are permitted provided that the following conditions
7.\" are met:
8.\" 1. Redistributions of source code must retain the above copyright
9.\"    notice, this list of conditions and the following disclaimer.
10.\" 2. Redistributions in binary form must reproduce the above copyright
11.\"    notice, this list of conditions and the following disclaimer in the
12.\"    documentation and/or other materials provided with the distribution.
13.\"
14.\" THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY EXPRESS OR
15.\" IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
16.\" OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
17.\" IN NO EVENT SHALL THE DEVELOPERS BE LIABLE FOR ANY DIRECT, INDIRECT,
18.\" INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
19.\" NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
20.\" DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
21.\" THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
22.\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
23.\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
24.\"
25.Dd April 2, 2014
26.Dt EVENTTIMERS 9
27.Os
28.Sh NAME
29.Nm eventtimers
30.Nd kernel event timers subsystem
31.Sh SYNOPSIS
32.In sys/timeet.h
33.Bd -literal
34struct eventtimer;
35
36typedef int et_start_t(struct eventtimer *et,
37    sbintime_t first, sbintime_t period);
38typedef int et_stop_t(struct eventtimer *et);
39typedef void et_event_cb_t(struct eventtimer *et, void *arg);
40typedef int et_deregister_cb_t(struct eventtimer *et, void *arg);
41
42struct eventtimer {
43	SLIST_ENTRY(eventtimer)	et_all;
44	char			*et_name;
45	int			et_flags;
46#define ET_FLAGS_PERIODIC	1
47#define ET_FLAGS_ONESHOT	2
48#define ET_FLAGS_PERCPU		4
49#define ET_FLAGS_C3STOP		8
50#define ET_FLAGS_POW2DIV	16
51	int			et_quality;
52	int			et_active;
53	uint64_t		et_frequency;
54	sbintime_t		et_min_period;
55	sbintime_t		et_max_period;
56	et_start_t		*et_start;
57	et_stop_t		*et_stop;
58	et_event_cb_t		*et_event_cb;
59	et_deregister_cb_t	*et_deregister_cb;
60	void 			*et_arg;
61	void			*et_priv;
62	struct sysctl_oid	*et_sysctl;
63};
64.Ed
65.Ft int
66.Fn et_register "struct eventtimer *et"
67.Ft int
68.Fn et_deregister "struct eventtimer *et"
69.Ft void
70.Fn et_change_frequency "struct eventtimer *et" "uint64_t newfreq"
71.Fn ET_LOCK
72.Fn ET_UNLOCK
73.Ft struct eventtimer *
74.Fn et_find "const char *name" "int check" "int want"
75.Ft int
76.Fn et_init "struct eventtimer *et" "et_event_cb_t *event" "et_deregister_cb_t *deregister" "void *arg"
77.Ft int
78.Fn et_start "struct eventtimer *et" "sbintime_t first" "sbintime_t period"
79.Ft int
80.Fn et_stop "struct eventtimer *et"
81.Ft int
82.Fn et_ban "struct eventtimer *et"
83.Ft int
84.Fn et_free "struct eventtimer *et"
85.Sh DESCRIPTION
86Event timers are responsible for generating interrupts at specified time
87or periodically, to run different time-based events.
88Subsystem consists of three main parts:
89.Bl -tag -width "Consumers"
90.It Drivers
91Manage hardware to generate requested time events.
92.It Consumers
93.Pa sys/kern/kern_clocksource.c
94uses event timers to supply kernel with
95.Fn hardclock ,
96.Fn statclock
97and
98.Fn profclock
99time events.
100.It Glue code
101.Pa sys/sys/timeet.h ,
102.Pa sys/kern/kern_et.c
103provide APIs for event timer drivers and consumers.
104.El
105.Sh DRIVER API
106Driver API is built around eventtimer structure.
107To register its functionality driver allocates that structure and calls
108.Fn et_register .
109Driver should fill following fields there:
110.Bl -tag -width Va
111.It Va et_name
112Unique name of the event timer for management purposes.
113.It Va et_flags
114Set of flags, describing timer capabilities:
115.Bl -tag -width "ET_FLAGS_PERIODIC" -compact
116.It ET_FLAGS_PERIODIC
117Periodic mode supported.
118.It ET_FLAGS_ONESHOT
119One-shot mode supported.
120.It ET_FLAGS_PERCPU
121Timer is per-CPU.
122.It ET_FLAGS_C3STOP
123Timer may stop in CPU sleep state.
124.It ET_FLAGS_POW2DIV
125Timer supports only 2^n divisors.
126.El
127.It Va et_quality
128Abstract value to certify whether this timecounter is better than the others.
129Higher value means better.
130.It Va et_frequency
131Timer oscillator's base frequency, if applicable and known.
132Used by consumers to predict set of possible frequencies that could be
133obtained by dividing it.
134Should be zero if not applicable or unknown.
135.It Va et_min_period , et_max_period
136Minimal and maximal reliably programmable time periods.
137.It Va et_start
138Driver's timer start function pointer.
139.It Va et_stop
140Driver's timer stop function pointer.
141.It Va et_priv
142Driver's private data storage.
143.El
144.Pp
145After the event timer functionality is registered, it is controlled via
146.Va et_start
147and
148.Va et_stop
149methods.
150.Va et_start
151method is called to start the specified event timer.
152The last two arguments are used to specify time when events should be
153generated.
154.Va first
155argument specifies time period before the first event generated.
156In periodic mode NULL value specifies that first period is equal to the
157.Va period
158argument value.
159.Va period
160argument specifies the time period between following events for the
161periodic mode.
162The NULL value there specifies the one-shot mode.
163At least one of these two arguments should be not NULL.
164When event time arrive, driver should call
165.Va et_event_cb
166callback function, passing
167.Va et_arg
168as the second argument.
169.Va et_stop
170method is called to stop the specified event timer.
171For the per-CPU event timers
172.Va et_start
173and
174.Va et_stop
175methods control timers associated with the current CPU.
176.Pp
177Driver may deregister its functionality by calling
178.Fn et_deregister .
179.Pp
180If the frequency of the clock hardware can change while it is
181running (for example, during power-saving modes), the driver must call
182.Fn et_change_frequency
183on each change.
184If the given event timer is the active timer,
185.Fn et_change_frequency
186stops the timer on all CPUs, updates
187.Va et->frequency ,
188then restarts the timer on all CPUs so that all
189current events are rescheduled using the new frequency.
190If the given timer is not currently active,
191.Fn et_change_frequency
192simply updates
193.Va et->frequency .
194.Sh CONSUMER API
195.Fn et_find
196allows consumer to find available event timer, optionally matching specific
197name and/or capability flags.
198Consumer may read returned eventtimer structure, but should not modify it.
199When wanted event timer is found,
200.Fn et_init
201should be called for it, submitting
202.Va event
203and optionally
204.Va deregister
205callbacks functions, and the opaque argument
206.Va arg .
207That argument will be passed as argument to the callbacks.
208Event callback function will be called on scheduled time events.
209It is called from the hardware interrupt context, so no sleep is permitted
210there.
211Deregister callback function may be called to report consumer that the event
212timer functionality is no longer available.
213On this call, consumer should stop using event timer before the return.
214.Pp
215After the timer is found and initialized, it can be controlled via
216.Fn et_start
217and
218.Fn et_stop .
219The arguments are the same as described in driver API.
220Per-CPU event timers can be controlled only from specific CPUs.
221.Pp
222.Fn et_ban
223allows consumer to mark event timer as broken via clearing both one-shot and
224periodic capability flags, if it was somehow detected.
225.Fn et_free
226is the opposite to
227.Fn et_init .
228It releases the event timer for other consumers use.
229.Pp
230.Fn ET_LOCK
231and
232.Fn ET_UNLOCK
233macros should be used to manage
234.Xr mutex 9
235lock around
236.Fn et_find ,
237.Fn et_init
238and
239.Fn et_free
240calls to serialize access to the list of the registered event timers and the
241pointers returned by
242.Fn et_find .
243.Fn et_start
244and
245.Fn et_stop
246calls should be serialized in consumer's internal way to avoid concurrent
247timer hardware access.
248.Sh SEE ALSO
249.Xr eventtimers 4
250.Sh AUTHORS
251.An Alexander Motin Aq Mt mav@FreeBSD.org
252