xref: /freebsd/share/man/man4/wg.4 (revision 5ca8e32633c4ffbbcd6762e5888b6a4ba0708c6c)
1.\" SPDX-License-Identifier: BSD-2-Clause
2.\"
3.\" Copyright (c) 2020 Gordon Bergling <gbe@FreeBSD.org>
4.\"
5.\" Redistribution and use in source and binary forms, with or without
6.\" modification, are permitted provided that the following conditions
7.\" are met:
8.\" 1. Redistributions of source code must retain the above copyright
9.\"    notice, this list of conditions and the following disclaimer.
10.\" 2. Redistributions in binary form must reproduce the above copyright
11.\"    notice, this list of conditions and the following disclaimer in the
12.\"    documentation and/or other materials provided with the distribution.
13.\"
14.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
15.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
17.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
18.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
20.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
21.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
22.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
23.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
24.\" SUCH DAMAGE.
25.\"
26.Dd June 12, 2023
27.Dt WG 4
28.Os
29.Sh NAME
30.Nm wg
31.Nd "WireGuard protocol driver"
32.Sh SYNOPSIS
33To load the driver as a module at boot time, place the following line in
34.Xr loader.conf 5 :
35.Bd -literal -offset indent
36if_wg_load="YES"
37.Ed
38.Sh DESCRIPTION
39The
40.Nm
41driver provides Virtual Private Network (VPN) interfaces for the secure
42exchange of layer 3 traffic with other WireGuard peers using the WireGuard
43protocol.
44.Pp
45A
46.Nm
47interface recognizes one or more peers, establishes a secure tunnel with
48each on demand, and tracks each peer's UDP endpoint for exchanging encrypted
49traffic with.
50.Pp
51The interfaces can be created at runtime using the
52.Ic ifconfig Cm wg Ns Ar N Cm create
53command.
54The interface itself can be configured with
55.Xr wg 8 .
56.Pp
57The following glossary provides a brief overview of WireGuard
58terminology:
59.Bl -tag -width indent -offset 3n
60.It Peer
61Peers exchange IPv4 or IPv6 traffic over secure tunnels.
62Each
63.Nm
64interface may be configured to recognize one or more peers.
65.It Key
66Each peer uses its private key and corresponding public key to
67identify itself to others.
68A peer configures a
69.Nm
70interface with its own private key and with the public keys of its peers.
71.It Pre-shared key
72In addition to the public keys, each peer pair may be configured with a
73unique pre-shared symmetric key.
74This is used in their handshake to guard against future compromise of the
75peers' encrypted tunnel if an attack on their
76Diffie-Hellman exchange becomes feasible.
77It is optional, but recommended.
78.It Allowed IP addresses
79A single
80.Nm
81interface may maintain concurrent tunnels connecting diverse networks.
82The interface therefore implements rudimentary routing and reverse-path
83filtering functions for its tunneled traffic.
84These functions reference a set of allowed IP address ranges configured
85against each peer.
86.Pp
87The interface will route outbound tunneled traffic to the peer configured
88with the most specific matching allowed IP address range, or drop it
89if no such match exists.
90.Pp
91The interface will accept tunneled traffic only from the peer
92configured with the most specific matching allowed IP address range
93for the incoming traffic, or drop it if no such match exists.
94That is, tunneled traffic routed to a given peer cannot return through
95another peer of the same
96.Nm
97interface.
98This ensures that peers cannot spoof one another's traffic.
99.It Handshake
100Two peers handshake to mutually authenticate each other and to
101establish a shared series of secret ephemeral encryption keys.
102Either peer may initiate a handshake.
103Handshakes occur only when there is traffic to send, and recur every
104two minutes during transfers.
105.It Connectionless
106Due to the handshake behavior, there is no connected or disconnected
107state.
108.El
109.Ss Keys
110Private keys for WireGuard can be generated from any sufficiently
111secure random source.
112The Curve25519 keys and the pre-shared keys are both 32 bytes
113long and are commonly encoded in base64 for ease of use.
114.Pp
115Keys can be generated with
116.Xr wg 8
117as follows:
118.Pp
119.Dl $ wg genkey
120.Pp
121Although a valid Curve25519 key must have 5 bits set to
122specific values, this is done by the interface and so it
123will accept any random 32-byte base64 string.
124.Sh EXAMPLES
125Create a
126.Nm
127interface and set random private key.
128.Bd -literal -offset indent
129# ifconfig wg0 create
130# wg genkey | wg set wg0 listen-port 54321 private-key /dev/stdin
131.Ed
132.Pp
133Retrieve the associated public key from a
134.Nm
135interface.
136.Bd -literal -offset indent
137$ wg show wg0 public-key
138.Ed
139.Pp
140Connect to a specific endpoint using its public-key and set the allowed IP address
141.Bd -literal -offset indent
142# wg set wg0 peer '7lWtsDdqaGB3EY9WNxRN3hVaHMtu1zXw71+bOjNOVUw=' endpoint 10.0.1.100:54321 allowed-ips 192.168.2.100/32
143.Ed
144.Pp
145Remove a peer
146.Bd -literal -offset indent
147# wg set wg0 peer '7lWtsDdqaGB3EY9WNxRN3hVaHMtu1zXw71+bOjNOVUw=' remove
148.Ed
149.Sh DIAGNOSTICS
150The
151.Nm
152interface supports runtime debugging, which can be enabled with:
153.Pp
154.D1 Ic ifconfig Cm wg Ns Ar N Cm debug
155.Pp
156Some common error messages include:
157.Bl -diag
158.It "Handshake for peer X did not complete after 5 seconds, retrying"
159Peer X did not reply to our initiation packet, for example because:
160.Bl -bullet
161.It
162The peer does not have the local interface configured as a peer.
163Peers must be able to mutually authenticate each other.
164.It
165The peer endpoint IP address is incorrectly configured.
166.It
167There are firewall rules preventing communication between hosts.
168.El
169.It "Invalid handshake initiation"
170The incoming handshake packet could not be processed.
171This is likely due to the local interface not containing
172the correct public key for the peer.
173.It "Invalid initiation MAC"
174The incoming handshake initiation packet had an invalid MAC.
175This is likely because the initiation sender has the wrong public key
176for the handshake receiver.
177.It "Packet has unallowed src IP from peer X"
178After decryption, an incoming data packet has a source IP address that
179is not assigned to the allowed IPs of Peer X.
180.El
181.Sh SEE ALSO
182.Xr inet 4 ,
183.Xr ip 4 ,
184.Xr ipsec 4 ,
185.Xr netintro 4 ,
186.Xr ovpn 4 ,
187.Xr ipf 5 ,
188.Xr pf.conf 5 ,
189.Xr ifconfig 8 ,
190.Xr ipfw 8 ,
191.Xr wg 8
192.Rs
193.%T WireGuard whitepaper
194.%U https://www.wireguard.com/papers/wireguard.pdf
195.Re
196.Sh HISTORY
197The
198.Nm
199device driver first appeared in
200.Fx 13.2 .
201.Sh AUTHORS
202.An -nosplit
203The
204.Nm
205device driver was written by
206.An Jason A. Donenfeld Aq Mt Jason@zx2c4.com ,
207.An Matt Dunwoodie Aq Mt ncon@nconroy.net ,
208.An Kyle Evans Aq Mt kevans@FreeBSD.org ,
209and
210.An Matt Macy Aq Mt mmacy@FreeBSD.org .
211.Pp
212This manual page was written by
213.An Gordon Bergling Aq Mt gbe@FreeBSD.org
214and is based on the
215.Ox
216manual page written by
217.An David Gwynne Aq Mt dlg@openbsd.org .
218