xref: /freebsd/share/man/man4/ural.4 (revision a64729f5077d77e13b9497cb33ecb3c82e606ee8)
1.\" Copyright (c) 2005, 2006
2.\"     Damien Bergamini <damien.bergamini@free.fr>
3.\"
4.\" Permission to use, copy, modify, and distribute this software for any
5.\" purpose with or without fee is hereby granted, provided that the above
6.\" copyright notice and this permission notice appear in all copies.
7.\"
8.\" THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
9.\" WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
10.\" MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
11.\" ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
12.\" WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
13.\" ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
14.\" OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
15.\"
16.Dd April 13, 2008
17.Dt URAL 4
18.Os
19.Sh NAME
20.Nm ural
21.Nd "Ralink Technology RT2500USB IEEE 802.11 driver"
22.Sh SYNOPSIS
23To compile this driver into the kernel,
24place the following lines in your
25kernel configuration file:
26.Bd -ragged -offset indent
27.Cd "device ehci"
28.Cd "device uhci"
29.Cd "device ohci"
30.Cd "device usb"
31.Cd "device ural"
32.Cd "device wlan"
33.Cd "device wlan_amrr"
34.Ed
35.Pp
36Alternatively, to load the driver as a
37module at boot time, place the following line in
38.Xr loader.conf 5 :
39.Bd -literal -offset indent
40if_ural_load="YES"
41.Ed
42.Sh DESCRIPTION
43The
44.Nm
45driver supports USB 2.0 wireless adapters based on the RT2500USB chipset.
46.Pp
47The RT2500USB chipset consists of two integrated chips, a RT2570 MAC/BBP
48and a radio transceiver (the model of which depends on the card revision).
49.Pp
50The RT2522, RT2523, RT2524, RT2525, RT2525e and RT2526 radio transceivers
51operate in the 2.4GHz band (802.11b/g) whereas the RT5222 is a dual-band radio
52transceiver that can operate in the 2.4GHz and 5.2GHz bands (802.11a).
53.Pp
54.Nm
55supports
56.Cm station ,
57.Cm adhoc ,
58.Cm hostap ,
59and
60.Cm monitor
61mode operation.
62Only one virtual interface may be configured at any time.
63For more information on configuring this device, see
64.Xr ifconfig 8 .
65.Sh HARDWARE
66The
67.Nm
68driver supports USB 2.0 wireless adapters based on the Ralink Technology
69RT2500USB chipset, including:
70.Pp
71.Bl -column -compact ".Li Atlantis Land A02-PCM-W54" "Bus"
72.It Em Card Ta Em Bus
73.It "AMIT WL532U" Ta USB
74.It "ASUS WL-167g" Ta USB
75.It "Belkin F5D7050 v2000" Ta USB
76.It "Buffalo WLI-U2-KG54-AI" Ta USB
77.It "CNet CWD-854" Ta USB
78.It "Compex WLU54G 2A1100" Ta USB
79.It "Conceptronic C54RU" Ta USB
80.It "D-Link DWL-G122 b1" Ta USB
81.It "Dynalink WLG25USB" Ta USB
82.It "E-Tech WGUS02" Ta USB
83.It "Gigabyte GN-WBKG" Ta USB
84.It "Hercules HWGUSB2-54" Ta USB
85.It "KCORP LifeStyle KLS-685" Ta USB
86.It "Linksys WUSB54G v4" Ta USB
87.It "Linksys WUSB54GP v4" Ta USB
88.It "MSI MS-6861" Ta USB
89.It "MSI MS-6865" Ta USB
90.It "MSI MS-6869" Ta USB
91.It "NovaTech NV-902" Ta USB
92.It "OvisLink Evo-W54USB" Ta USB
93.It "SerComm UB801R" Ta USB
94.It "SparkLAN WL-685R" Ta USB
95.It "Surecom EP-9001-g" Ta USB
96.It "Sweex LC100060" Ta USB
97.It "Tonze UW-6200C" Ta USB
98.It "Zinwell ZWX-G261" Ta USB
99.It "Zonet ZEW2500P" Ta USB
100.El
101.Pp
102An up to date list can be found at
103.Pa http://ralink.rapla.net/ .
104.Sh EXAMPLES
105Join an existing BSS network (i.e., connect to an access point):
106.Bd -literal -offset indent
107ifconfig wlan create wlandev ural0 inet 192.168.0.20 \e
108    netmask 0xffffff00
109.Ed
110.Pp
111Join a specific BSS network with network name
112.Dq Li my_net :
113.Pp
114.Dl "ifconfig wlan create wlandev ural0 ssid my_net up"
115.Pp
116Join a specific BSS network with 64-bit WEP encryption:
117.Bd -literal -offset indent
118ifconfig wlan create wlandev ural0 ssid my_net \e
119	wepmode on wepkey 0x1234567890 weptxkey 1 up
120.Ed
121.Pp
122Join a specific BSS network with 128-bit WEP encryption:
123.Bd -literal -offset indent
124ifconfig wlan create wlandev ural0 wlanmode adhoc ssid my_net \e
125    wepmode on wepkey 0x01020304050607080910111213 weptxkey 1
126.Ed
127.Sh DIAGNOSTICS
128.Bl -diag
129.It "ural%d: device timeout"
130The driver will reset the hardware.
131This should not happen.
132.El
133.Sh SEE ALSO
134.Xr intro 4 ,
135.Xr netintro 4 ,
136.Xr usb 4 ,
137.Xr wlan 4 ,
138.Xr wlan_amrr 4 ,
139.Xr wlan_ccmp 4 ,
140.Xr wlan_tkip 4 ,
141.Xr wlan_wep 4 ,
142.Xr wlan_xauth 4 ,
143.Xr hostapd 8 ,
144.Xr ifconfig 8 ,
145.Xr wpa_supplicant 8
146.Sh HISTORY
147The
148.Nm
149driver first appeared in
150.Ox 3.7 .
151.Sh AUTHORS
152The original
153.Nm
154driver was written by
155.An Damien Bergamini Aq Mt damien.bergamini@free.fr .
156.Sh BUGS
157Host AP mode doesn't support client power save.
158Clients using power save mode will experience
159packet loss (disabling power saving on the client will fix this).
160