1.\" 2.\" Copyright (c) 2001 The NetBSD Foundation, Inc. 3.\" All rights reserved. 4.\" 5.\" This code is derived from software contributed to The NetBSD Foundation 6.\" by Lennart Augustsson. 7.\" 8.\" Redistribution and use in source and binary forms, with or without 9.\" modification, are permitted provided that the following conditions 10.\" are met: 11.\" 1. Redistributions of source code must retain the above copyright 12.\" notice, this list of conditions and the following disclaimer. 13.\" 2. Redistributions in binary form must reproduce the above copyright 14.\" notice, this list of conditions and the following disclaimer in the 15.\" documentation and/or other materials provided with the distribution. 16.\" 17.\" THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 18.\" ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 19.\" TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 20.\" PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 21.\" BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 22.\" CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 23.\" SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 24.\" INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 25.\" CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 26.\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 27.\" POSSIBILITY OF SUCH DAMAGE. 28.\" 29.Dd April 26, 2017 30.Dt UBSA 4 31.Os 32.Sh NAME 33.Nm ubsa 34.Nd USB support for Belkin serial adapters 35.Sh SYNOPSIS 36To compile this driver into the kernel, 37place the following lines in your 38kernel configuration file: 39.Bd -ragged -offset indent 40.Cd "device usb" 41.Cd "device ucom" 42.Cd "device ubsa" 43.Ed 44.Pp 45Alternatively, to load the driver as a 46module at boot time, place the following line in 47.Xr loader.conf 5 : 48.Bd -literal -offset indent 49ubsa_load="YES" 50.Ed 51.Sh DESCRIPTION 52The 53.Nm 54driver provides support for the USB-to-RS232 Bridge chip used by a variety of 55serial adapters from Belkin and other vendors. 56.Pp 57The device is accessed through the 58.Xr ucom 4 59driver which makes it behave like a 60.Xr tty 4 . 61.Sh HARDWARE 62The 63.Nm 64driver supports the following adapters: 65.Pp 66.Bl -bullet -compact 67.It 68AnyData ADU-500A EV-DO modem 69.It 70AnyData ADU-E100A (no EV-DO mode support) 71.It 72Belkin F5U103 73.It 74Belkin F5U120 75.It 76e-Tek Labs Kwik232 77.It 78GoHubs GoCOM232 79.It 80Peracom single port serial adapter 81.El 82.Sh FILES 83.Bl -tag -width "/dev/ttyU*.init" -compact 84.It Pa /dev/ttyU* 85for callin ports 86.It Pa /dev/ttyU*.init 87.It Pa /dev/ttyU*.lock 88corresponding callin initial-state and lock-state devices 89.Pp 90.It Pa /dev/cuaU* 91for callout ports 92.It Pa /dev/cuaU*.init 93.It Pa /dev/cuaU*.lock 94corresponding callout initial-state and lock-state devices 95.El 96.Sh SEE ALSO 97.Xr tty 4 , 98.Xr ucom 4 , 99.Xr usb 4 100.Sh HISTORY 101The 102.Nm 103driver 104appeared in 105.Fx 5.0 . 106The 107.Xr uplcom 4 108manual page was adopted from 109.Nx 110by 111.An Tom Rhodes Aq Mt trhodes@FreeBSD.org 112in April 2002 and modified for the 113.Nm 114driver by 115.An Alexander Kabaev Aq Mt kan@FreeBSD.org 116in October 2002. 117.Sh AUTHORS 118The 119.Nm 120driver was written by 121.An Alexander Kabaev Aq Mt kan@FreeBSD.org . 122