man/man4/uath.4

.\"
.\" Copyright (c) 2006
.\"     Damien Bergamini <damien.bergamini@free.fr>
.\"
.\" Permission to use, copy, modify, and distribute this software for any
.\" purpose with or without fee is hereby granted, provided that the above
.\" copyright notice and this permission notice appear in all copies.
.\"
.\" THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
.\" WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
.\" MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
.\" ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
.\" WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
.\" ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
.\" OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
.\"
.Dd April 7, 2009
.Dt UATH 4
.Os
.Sh NAME
.Nm uath
.Nd Atheros USB IEEE 802.11a/b/g wireless network device
.Sh SYNOPSIS
To compile this driver into the kernel,
place the following lines in your
kernel configuration file:
.Bd -ragged -offset indent
.Cd "device ehci"
.Cd "device uhci"
.Cd "device ohci"
.Cd "device usb"
.Cd "device uath"
.Cd "device wlan"
.Ed
.Pp
Alternatively, to load the driver as a
module at boot time, place the following line in
.Xr loader.conf 5 :
.Bd -literal -offset indent
if_uath_load="YES"
.Ed
.Sh DESCRIPTION
The
.Nm
driver supports USB 2.0 wireless network devices based on Atheros
Communications fifth generation AR5005UG and AR5005UX chipsets.
.Pp
The AR5005UG chipset is made of an AR5523 multiprotocol MAC/baseband processor
and an AR2112 Radio-on-a-Chip that can operate between 2300 and 2500 MHz
(802.11b/g).
.Pp
The AR5005UX chipset is made of an AR5523 multiprotocol MAC/baseband processor
and an AR5112 dual band Radio-on-a-Chip that can operate between 2300 and
2500 MHz (802.11b/g) or 4900 and 5850 MHz (802.11a).
.Pp
The AR5005UG and AR5005UX chipsets both have an integrated 32-bit MIPS
R4000-class processor that runs a firmware and manages, among other things,
the automatic control of the transmit rate and the calibration of the radio.
.Pp
.Nm
supports
.Cm station ,
and
.Cm monitor
mode operation.
Only one virtual interface may be configured at any time.
For more information on configuring this device, see
.Xr ifconfig 8 .
.Sh FIRMWARE
.Nm
requires firmware that is downloaded to the device.
This is normally done by the
.Xr uathload 8
utility that is launched by
.Xr devd 8
when the device is inserted.
.Xr uathload 8
includes the firmware in the binary program.
This firmware is licensed for general use and is included in the base system.
.Sh HARDWARE
The
.Nm
driver should work with the following adapters:
.Bl -column "TRENDware International TEW-444UB" "AR5005UX"
.It Em "Adapter" Ta Em "Chipset"
.\".It Belkin F6D3050	AR5005UX
.It Li "Compex WLU108AG" Ta AR5005UX
.It Li "Compex WLU108G" Ta AR5005UG
.\".It Li "D-Link DWL-AG132" Ta AR5005UX
.It Li "D-Link DWL-G132" Ta AR5005UG
.\".It Li "Edimax EW-7315Ug" Ta AR5005UG (AR2414???)
.\".It Li "Lancom USB-54ag" Ta AR5005UX
.\".It Li "NEC WL54TU" Ta AR5005UX
.It Li "IODATA WN-G54/US" Ta AR5005UG
.It Li "MELCO WLI-U2-KAMG54" Ta AR5005UX
.It Li "Netgear WG111T" Ta AR5005UG
.It Li "Netgear WG111U" Ta AR5005UX
.It Li "Netgear WPN111" Ta AR5005UG
.It Li "Olitec 000544" Ta AR5005UG
.It Li "PLANET WDL-U357" Ta AR5005UX
.\".It Li "Senao WUB-8004" Ta AR5005UX
.It Li "Siemens Gigaset 108" Ta AR5005UG
.It Li "SMC SMCWUSBT-G" Ta AR5005UG
.It Li "SMC SMCWUSBT-G2" Ta AR5005UG
.\".It Li "SparkLAN WL-685GS" Ta AR5005UG
.It Li "SparkLAN WL-785A" Ta AR5005UX
.It Li "TP-Link TL-WN620G" Ta AR5005UG
.It Li "TRENDware International TEW-444UB" Ta AR5005UG
.It Li "TRENDware International TEW-504UB" Ta AR5005UX
.It Li "Unex Technology UR054ag" Ta AR5005UX
.\".It Li "Wistron NeWeb DCUA-81" Ta AR5005UX
.\".It Li "Wistron NeWeb DRUA-81" Ta AR5005UG
.\".It Li "Wistron NeWeb DRUA-82" Ta AR5005UX
.\".It Li "ZyXEL G-200 v2" Ta AR5005UG
.It Li "ZyXEL XtremeMIMO M-202" Ta AR5005UX
.El
.Sh EXAMPLES
Join an existing BSS network (i.e., connect to an access point):
.Bd -literal -offset indent
ifconfig wlan create wlandev uath0 inet 192.168.0.20 \e
    netmask 0xffffff00
.Ed
.Pp
Join a specific BSS network with network name
.Dq Li my_net :
.Pp
.Dl "ifconfig wlan create wlandev uath0 ssid my_net up"
.Pp
Join a specific BSS network with 64-bit WEP encryption:
.Bd -literal -offset indent
ifconfig wlan create wlandev uath0 ssid my_net \e
	wepmode on wepkey 0x1234567890 weptxkey 1 up
.Ed
.Pp
Join a specific BSS network with 128-bit WEP encryption:
.Bd -literal -offset indent
ifconfig wlan create wlandev uath0 wlanmode adhoc ssid my_net \e
    wepmode on wepkey 0x01020304050607080910111213 weptxkey 1
.Ed
.Sh DIAGNOSTICS
.Bl -diag
.It "uath%d: could not send command (error=%s)"
An attempt to send a command to the firmware failed.
.It "uath%d: timeout waiting for command reply"
A read command was sent to the firmware but the firmware failed to reply in
time.
.It "uath%d: device timeout"
A frame dispatched to the hardware for transmission did not complete in time.
The driver will reset the hardware.
This should not happen.
.El
.Sh SEE ALSO
.Xr netintro 4 ,
.Xr usb 4 ,
.Xr wlan 4 ,
.Xr wlan_ccmp 4 ,
.Xr wlan_tkip 4 ,
.Xr wlan_wep 4 ,
.Xr devd 8 ,
.Xr ifconfig 8 ,
.Xr uathload 8 ,
.Xr wpa_supplicant 8
.Sh HISTORY
The
.Nm
driver first appeared in
.Ox 4.0 .
.Sh AUTHORS
.An -nosplit
The
.Nm
driver was written by
.An Weongyo Jeong Aq Mt weongyo@FreeBSD.org
and
.An Sam Leffler Aq Mt sam@FreeBSD.org .
It is distantly related to a driver written by
.An Damien Bergamini Aq Mt damien@openbsd.org .
.Sh CAVEATS
Atheros proprietary 108 Mbps mode (aka Super AG mode) is not supported.
.Pp
Dual-band adapters are presently not working;
to workaround, restriction operation to 2.4GHz channels.